summaryrefslogtreecommitdiffstats
path: root/drivers/usb/cdns3/host.c
diff options
context:
space:
mode:
authorTim Chen <tim.c.chen@linux.intel.com>2026-09-21 17:37:22 -0700
committerIngo Molnar <mingo@kernel.org>2026-09-22 10:49:53 +0200
commit0d6526f82c3cdefcca47f73f5fc08dc6f335eac6 (patch)
tree176dc2d685debcfb082c151ee94f2425ac96b364 /drivers/usb/cdns3/host.c
downloadlinux-stable-0d6526f82c3cdefcca47f73f5fc08dc6f335eac6.tar.gz
linux-stable-0d6526f82c3cdefcca47f73f5fc08dc6f335eac6.zip
sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted
alb_break_llc() decides whether to break LLC preference during active load balance. It does so by testing that every runnable fair task on the source rq prefers its LLC: env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable But the two counters cover different sets. nr_pref_llc_running is updated in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued, so it follows queued tasks. h_nr_runnable is updated in set_delayed()/ clear_delayed() and drops delay-dequeued tasks. So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks, alb_break_llc() returns false, and active balance is free to pull a task off its preferred LLC. Active balance only moves runnable tasks, and this is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB skips the per-task test in can_migrate_task(). The runnable set is the one we want. Fix it on the counter side. A task should be counted in nr_pref_llc_running exactly while it is both queued on its preferred LLC (pref_llc_queued) and runnable (!sched_delayed). Define that membership once in task_pref_llc_runnable(), and adjust the counter only through pref_llc_running_inc()/pref_llc_running_dec() from the four sites that change either input: account_llc_enqueue(), account_llc_dequeue(), set_delayed() and clear_delayed(). Gating every update on the same predicate keeps the delay, wake and dequeue paths from double-counting or underflowing; see the comments at those sites for the ordering. nr_llc_running and sd->llc_counts are not touched and stay on queued semantics. Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC") Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/ Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com> Suggested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com> Cc: <stable@kernel.org> # v7.2.x Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com
Diffstat (limited to 'drivers/usb/cdns3/host.c')
-rw-r--r--drivers/usb/cdns3/host.c168
1 files changed, 168 insertions, 0 deletions
diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
new file mode 100644
index 000000000..f0df114c2
--- /dev/null
+++ b/drivers/usb/cdns3/host.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver - host side
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ * Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "drd.h"
+#include "host-export.h"
+#include <linux/usb/hcd.h>
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+
+/*
+ * The XECP_PORT_CAP_REG and XECP_AUX_CTRL_REG1 exist only
+ * in Cadence USB3 dual-role controller, so it can't be used
+ * with Cadence CDNSP dual-role controller.
+ */
+#define XECP_PORT_CAP_REG 0x8000
+#define XECP_AUX_CTRL_REG1 0x8120
+
+#define CFG_RXDET_P3_EN BIT(15)
+#define LPM_2_STB_SWITCH_EN BIT(25)
+
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 value;
+
+ /* set usbcmd.EU3S */
+ value = readl(&xhci->op_regs->command);
+ value |= CMD_PM_INDEX;
+ writel(value, &xhci->op_regs->command);
+
+ if (hcd->regs) {
+ value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+ value |= CFG_RXDET_P3_EN;
+ writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+ value = readl(hcd->regs + XECP_PORT_CAP_REG);
+ value |= LPM_2_STB_SWITCH_EN;
+ writel(value, hcd->regs + XECP_PORT_CAP_REG);
+ }
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+ xhci_cdns3_plat_start(hcd);
+ return 0;
+}
+
+static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
+ .quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
+ .plat_start = xhci_cdns3_plat_start,
+ .resume_quirk = xhci_cdns3_resume_quirk,
+};
+
+static const struct xhci_plat_priv xhci_plat_cdnsp_xhci = {
+ .quirks = XHCI_CDNS_SCTX_QUIRK,
+};
+
+static int __cdns_host_init(struct cdns *cdns)
+{
+ struct platform_device *xhci;
+ int ret;
+ struct usb_hcd *hcd;
+
+ cdns_drd_host_on(cdns);
+
+ xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+ if (!xhci) {
+ dev_err(cdns->dev, "couldn't allocate xHCI device\n");
+ return -ENOMEM;
+ }
+
+ xhci->dev.parent = cdns->dev;
+ cdns->host_dev = xhci;
+
+ ret = platform_device_add_resources(xhci, cdns->xhci_res,
+ CDNS_XHCI_RESOURCES_NUM);
+ if (ret) {
+ dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
+ goto err1;
+ }
+
+ if (cdns->version < CDNSP_CONTROLLER_V2)
+ cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci,
+ sizeof(struct xhci_plat_priv), GFP_KERNEL);
+ else
+ cdns->xhci_plat_data = kmemdup(&xhci_plat_cdnsp_xhci,
+ sizeof(struct xhci_plat_priv), GFP_KERNEL);
+
+ if (!cdns->xhci_plat_data) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
+ cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+ ret = platform_device_add_data(xhci, cdns->xhci_plat_data,
+ sizeof(struct xhci_plat_priv));
+ if (ret)
+ goto free_memory;
+
+ ret = platform_device_add(xhci);
+ if (ret) {
+ dev_err(cdns->dev, "failed to register xHCI device\n");
+ goto free_memory;
+ }
+
+ /* Glue needs to access xHCI region register for Power management */
+ hcd = platform_get_drvdata(xhci);
+ if (hcd)
+ cdns->xhci_regs = hcd->regs;
+
+ return 0;
+
+free_memory:
+ kfree(cdns->xhci_plat_data);
+err1:
+ platform_device_put(xhci);
+ return ret;
+}
+
+static void cdns_host_exit(struct cdns *cdns)
+{
+ kfree(cdns->xhci_plat_data);
+ platform_device_unregister(cdns->host_dev);
+ cdns->host_dev = NULL;
+ cdns_drd_host_off(cdns);
+}
+
+static int cdns_host_resume(struct cdns *cdns, bool power_lost)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(cdns->host_dev);
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+ priv->power_lost = power_lost;
+
+ return 0;
+}
+
+int cdns_host_init(struct cdns *cdns)
+{
+ struct cdns_role_driver *rdrv;
+
+ rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+ if (!rdrv)
+ return -ENOMEM;
+
+ rdrv->start = __cdns_host_init;
+ rdrv->stop = cdns_host_exit;
+ rdrv->resume = cdns_host_resume;
+ rdrv->state = CDNS_ROLE_STATE_INACTIVE;
+ rdrv->name = "host";
+
+ cdns->roles[USB_ROLE_HOST] = rdrv;
+
+ return 0;
+}