x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 72 insertions, 0 deletions

diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c
new file mode 100644
index 000000000..6d99e5a06
--- /dev/null
+++ b/drivers/uio/uio_dfl.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic DFL driver for Userspace I/O devicess
+ *
+ * Copyright (C) 2021 Intel Corporation, Inc.
+ */
+#include <linux/dfl.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/uio_driver.h>
+
+#define DRIVER_NAME "uio_dfl"
+
+static int uio_dfl_probe(struct dfl_device *ddev)
+{
+	struct resource *r = &ddev->mmio_res;
+	struct device *dev = &ddev->dev;
+	struct uio_info *uioinfo;
+	struct uio_mem *uiomem;
+	int ret;
+
+	uioinfo = devm_kzalloc(dev, sizeof(struct uio_info), GFP_KERNEL);
+	if (!uioinfo)
+		return -ENOMEM;
+
+	uioinfo->name = DRIVER_NAME;
+	uioinfo->version = "0";
+
+	uiomem = &uioinfo->mem[0];
+	uiomem->memtype = UIO_MEM_PHYS;
+	uiomem->addr = r->start & PAGE_MASK;
+	uiomem->offs = r->start & ~PAGE_MASK;
+	uiomem->size = (uiomem->offs + resource_size(r)
+			+ PAGE_SIZE - 1) & PAGE_MASK;
+	uiomem->name = r->name;
+
+	/* Irq is yet to be supported */
+	uioinfo->irq = UIO_IRQ_NONE;
+
+	ret = devm_uio_register_device(dev, uioinfo);
+	if (ret)
+		dev_err(dev, "unable to register uio device\n");
+
+	return ret;
+}
+
+#define FME_FEATURE_ID_ETH_GROUP	0x10
+#define FME_FEATURE_ID_HSSI_SUBSYS	0x15
+#define FME_FEATURE_ID_VENDOR_SPECIFIC	0x23
+#define PORT_FEATURE_ID_IOPLL_USRCLK	0x14
+
+static const struct dfl_device_id uio_dfl_ids[] = {
+	{ FME_ID, FME_FEATURE_ID_ETH_GROUP },
+	{ FME_ID, FME_FEATURE_ID_HSSI_SUBSYS },
+	{ FME_ID, FME_FEATURE_ID_VENDOR_SPECIFIC },
+	{ PORT_ID, PORT_FEATURE_ID_IOPLL_USRCLK },
+	{ }
+};
+MODULE_DEVICE_TABLE(dfl, uio_dfl_ids);
+
+static struct dfl_driver uio_dfl_driver = {
+	.drv = {
+		.name = DRIVER_NAME,
+	},
+	.id_table	= uio_dfl_ids,
+	.probe		= uio_dfl_probe,
+};
+module_dfl_driver(uio_dfl_driver);
+
+MODULE_DESCRIPTION("Generic DFL driver for Userspace I/O devices");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");