Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 184 insertions, 0 deletions

diff --git a/drivers/tty/serial/sh-sci-common.h b/drivers/tty/serial/sh-sci-common.h
new file mode 100644
index 000000000..01ff9fced
--- /dev/null
+++ b/drivers/tty/serial/sh-sci-common.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __SH_SCI_COMMON_H__
+#define __SH_SCI_COMMON_H__
+
+#include <linux/serial_core.h>
+
+/* Private port IDs */
+enum SCI_PORT_TYPE {
+	RSCI_PORT_SCIF16 = BIT(7) | 0,
+	RSCI_PORT_SCIF32 = BIT(7) | 1,
+	RSCI_PORT_SCIF32_SINGLE_TCLK = BIT(7) | 2,
+};
+
+enum SCI_CLKS {
+	SCI_FCK,		/* Functional Clock */
+	SCI_SCK,		/* Optional External Clock */
+	SCI_BRG_INT,		/* Optional BRG Internal Clock Source */
+	SCI_SCIF_CLK,		/* Optional BRG External Clock Source */
+	SCI_FCK_DIV4,		/* Optional Functional Clock frequency-divided by 4 */
+	SCI_FCK_DIV16,		/* Optional Functional Clock frequency-divided by 16 */
+	SCI_FCK_DIV64,		/* Optional Functional Clock frequency-divided by 64 */
+	SCI_NUM_CLKS
+};
+
+/* Offsets into the sci_port->irqs array */
+enum {
+	SCIx_ERI_IRQ,
+	SCIx_RXI_IRQ,
+	SCIx_TXI_IRQ,
+	SCIx_BRI_IRQ,
+	SCIx_DRI_IRQ,
+	SCIx_TEI_IRQ,
+	SCIx_NR_IRQS,
+
+	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
+};
+
+/* Bit x set means sampling rate x + 1 is supported */
+#define SCI_SR(x)		BIT((x) - 1)
+#define SCI_SR_RANGE(x, y)	GENMASK((y) - 1, (x) - 1)
+
+void sci_release_port(struct uart_port *port);
+int sci_request_port(struct uart_port *port);
+void sci_config_port(struct uart_port *port, int flags);
+int sci_verify_port(struct uart_port *port, struct serial_struct *ser);
+void sci_pm(struct uart_port *port, unsigned int state,
+		   unsigned int oldstate);
+
+struct plat_sci_reg {
+	u8 offset;
+	u8 size;
+};
+
+struct sci_port_params_bits {
+	unsigned int rxtx_enable;
+	unsigned int te_clear;
+	unsigned int poll_sent_bits;
+};
+
+struct sci_common_regs {
+	unsigned int status;
+	unsigned int control;
+};
+
+/* The actual number of needed registers. This is used by sci only */
+#define SCI_NR_REGS 20
+
+struct sci_port_params {
+	const struct plat_sci_reg regs[SCI_NR_REGS];
+	const struct sci_common_regs *common_regs;
+	const struct sci_port_params_bits *param_bits;
+	unsigned int fifosize;
+	unsigned int overrun_reg;
+	unsigned int overrun_mask;
+	unsigned int sampling_rate_mask;
+	unsigned int error_mask;
+	unsigned int error_clear;
+};
+
+struct sci_port_ops {
+	u32 (*read_reg)(struct uart_port *port, int reg);
+	void (*write_reg)(struct uart_port *port, int reg, int value);
+	void (*clear_SCxSR)(struct uart_port *port, unsigned int mask);
+
+	void (*transmit_chars)(struct uart_port *port);
+	void (*receive_chars)(struct uart_port *port);
+
+	void (*poll_put_char)(struct uart_port *port, unsigned char c);
+
+	int (*set_rtrg)(struct uart_port *port, int rx_trig);
+	int (*rtrg_enabled)(struct uart_port *port);
+
+	void (*shutdown_complete)(struct uart_port *port);
+
+	void (*prepare_console_write)(struct uart_port *port, u32 ctrl);
+	void (*finish_console_write)(struct uart_port *port, u32 ctrl);
+	void (*console_save)(struct uart_port *port);
+	void (*console_restore)(struct uart_port *port);
+	size_t (*suspend_regs_size)(void);
+};
+
+struct sci_of_data {
+	const struct sci_port_params *params;
+	const struct uart_ops *uart_ops;
+	const struct sci_port_ops *ops;
+	unsigned short regtype;
+	unsigned short type;
+};
+
+struct sci_port {
+	struct uart_port	port;
+
+	/* Platform configuration */
+	const struct sci_port_params *params;
+	const struct plat_sci_port *cfg;
+
+	unsigned int		sampling_rate_mask;
+	resource_size_t		reg_size;
+	struct mctrl_gpios	*gpios;
+
+	/* Clocks */
+	struct clk		*clks[SCI_NUM_CLKS];
+	unsigned long		clk_rates[SCI_NUM_CLKS];
+
+	int			irqs[SCIx_NR_IRQS];
+	char			*irqstr[SCIx_NR_IRQS];
+
+	struct dma_chan			*chan_tx;
+	struct dma_chan			*chan_rx;
+
+	struct reset_control		*rstc;
+	struct sci_suspend_regs		*suspend_regs;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct dma_chan			*chan_tx_saved;
+	struct dma_chan			*chan_rx_saved;
+	dma_cookie_t			cookie_tx;
+	dma_cookie_t			cookie_rx[2];
+	dma_cookie_t			active_rx;
+	dma_addr_t			tx_dma_addr;
+	unsigned int			tx_dma_len;
+	struct scatterlist		sg_rx[2];
+	void				*rx_buf[2];
+	size_t				buf_len_rx;
+	struct work_struct		work_tx;
+	struct hrtimer			rx_timer;
+	unsigned int			rx_timeout;	/* microseconds */
+#endif
+	unsigned int			rx_frame;
+	int				rx_trigger;
+	struct timer_list		rx_fifo_timer;
+	int				rx_fifo_timeout;
+	u16				hscif_tot;
+
+	u8				type;
+	u8				regtype;
+
+	const struct sci_port_ops *ops;
+
+	bool has_rtscts;
+	bool autorts;
+	bool tx_occurred;
+};
+
+#define to_sci_port(uart) container_of((uart), struct sci_port, port)
+
+void sci_port_disable(struct sci_port *sci_port);
+void sci_port_enable(struct sci_port *sci_port);
+
+int sci_startup(struct uart_port *port);
+void sci_shutdown(struct uart_port *port);
+
+int sci_scbrr_calc(struct sci_port *s, unsigned int bps, unsigned int *brr,
+		   unsigned int *srr, unsigned int *cks);
+
+#define min_sr(_port)		ffs((_port)->sampling_rate_mask)
+#define max_sr(_port)		fls((_port)->sampling_rate_mask)
+
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+int __init scix_early_console_setup(struct earlycon_device *device, const struct sci_of_data *data);
+#endif
+
+#endif /* __SH_SCI_COMMON_H__ */