Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 662 insertions, 0 deletions

diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
new file mode 100644
index 000000000..93e7dda4d
--- /dev/null
+++ b/drivers/tty/serial/mcf.c
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0+
+/****************************************************************************/
+
+/*
+ *	mcf.c -- Freescale ColdFire UART driver
+ *
+ *	(C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org>
+ */
+
+/****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/nettel.h>
+
+/****************************************************************************/
+
+/*
+ *	Some boards implement the DTR/DCD lines using GPIO lines, most
+ *	don't. Dummy out the access macros for those that don't. Those
+ *	that do should define these macros somewhere in there board
+ *	specific inlude files.
+ */
+#if !defined(mcf_getppdcd)
+#define	mcf_getppdcd(p)		(1)
+#endif
+#if !defined(mcf_getppdtr)
+#define	mcf_getppdtr(p)		(1)
+#endif
+#if !defined(mcf_setppdtr)
+#define	mcf_setppdtr(p, v)	do { } while (0)
+#endif
+
+/****************************************************************************/
+
+/*
+ *	Local per-uart structure.
+ */
+struct mcf_uart {
+	struct uart_port	port;
+	unsigned int		sigs;		/* Local copy of line sigs */
+	unsigned char		imr;		/* Local IMR mirror */
+};
+
+/****************************************************************************/
+
+static unsigned int mcf_tx_empty(struct uart_port *port)
+{
+	return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ?
+		TIOCSER_TEMT : 0;
+}
+
+/****************************************************************************/
+
+static unsigned int mcf_get_mctrl(struct uart_port *port)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+	unsigned int sigs;
+
+	sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
+		0 : TIOCM_CTS;
+	sigs |= (pp->sigs & TIOCM_RTS);
+	sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
+	sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
+
+	return sigs;
+}
+
+/****************************************************************************/
+
+static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+
+	pp->sigs = sigs;
+	mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
+	if (sigs & TIOCM_RTS)
+		writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
+	else
+		writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
+}
+
+/****************************************************************************/
+
+static void mcf_start_tx(struct uart_port *port)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+
+	if (port->rs485.flags & SER_RS485_ENABLED) {
+		/* Enable Transmitter */
+		writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR);
+		/* Manually assert RTS */
+		writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
+	}
+	pp->imr |= MCFUART_UIR_TXREADY;
+	writeb(pp->imr, port->membase + MCFUART_UIMR);
+}
+
+/****************************************************************************/
+
+static void mcf_stop_tx(struct uart_port *port)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+
+	pp->imr &= ~MCFUART_UIR_TXREADY;
+	writeb(pp->imr, port->membase + MCFUART_UIMR);
+}
+
+/****************************************************************************/
+
+static void mcf_stop_rx(struct uart_port *port)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+
+	pp->imr &= ~MCFUART_UIR_RXREADY;
+	writeb(pp->imr, port->membase + MCFUART_UIMR);
+}
+
+/****************************************************************************/
+
+static void mcf_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long flags;
+
+	uart_port_lock_irqsave(port, &flags);
+	if (break_state == -1)
+		writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR);
+	else
+		writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR);
+	uart_port_unlock_irqrestore(port, flags);
+}
+
+/****************************************************************************/
+
+static int mcf_startup(struct uart_port *port)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+	unsigned long flags;
+
+	uart_port_lock_irqsave(port, &flags);
+
+	/* Reset UART, get it into known state... */
+	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
+	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
+
+	/* Enable the UART transmitter and receiver */
+	writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
+		port->membase + MCFUART_UCR);
+
+	/* Enable RX interrupts now */
+	pp->imr = MCFUART_UIR_RXREADY;
+	writeb(pp->imr, port->membase + MCFUART_UIMR);
+
+	uart_port_unlock_irqrestore(port, flags);
+
+	return 0;
+}
+
+/****************************************************************************/
+
+static void mcf_shutdown(struct uart_port *port)
+{
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+	unsigned long flags;
+
+	uart_port_lock_irqsave(port, &flags);
+
+	/* Disable all interrupts now */
+	pp->imr = 0;
+	writeb(pp->imr, port->membase + MCFUART_UIMR);
+
+	/* Disable UART transmitter and receiver */
+	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
+	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
+
+	uart_port_unlock_irqrestore(port, flags);
+}
+
+/****************************************************************************/
+
+static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
+			    const struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, baudclk;
+#if defined(CONFIG_M5272)
+	unsigned int baudfr;
+#endif
+	unsigned char mr1, mr2;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+#if defined(CONFIG_M5272)
+	baudclk = (MCF_BUSCLK / baud) / 32;
+	baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
+#else
+	baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
+#endif
+
+	mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
+	mr2 = 0;
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5: mr1 |= MCFUART_MR1_CS5; break;
+	case CS6: mr1 |= MCFUART_MR1_CS6; break;
+	case CS7: mr1 |= MCFUART_MR1_CS7; break;
+	case CS8:
+	default:  mr1 |= MCFUART_MR1_CS8; break;
+	}
+
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & CMSPAR) {
+			if (termios->c_cflag & PARODD)
+				mr1 |= MCFUART_MR1_PARITYMARK;
+			else
+				mr1 |= MCFUART_MR1_PARITYSPACE;
+		} else {
+			if (termios->c_cflag & PARODD)
+				mr1 |= MCFUART_MR1_PARITYODD;
+			else
+				mr1 |= MCFUART_MR1_PARITYEVEN;
+		}
+	} else {
+		mr1 |= MCFUART_MR1_PARITYNONE;
+	}
+
+	/*
+	 * FIXME: port->read_status_mask and port->ignore_status_mask
+	 * need to be initialized based on termios settings for
+	 * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT
+	 */
+
+	if (termios->c_cflag & CSTOPB)
+		mr2 |= MCFUART_MR2_STOP2;
+	else
+		mr2 |= MCFUART_MR2_STOP1;
+
+	if (termios->c_cflag & CRTSCTS) {
+		mr1 |= MCFUART_MR1_RXRTS;
+		mr2 |= MCFUART_MR2_TXCTS;
+	}
+
+	uart_port_lock_irqsave(port, &flags);
+	if (port->rs485.flags & SER_RS485_ENABLED) {
+		dev_dbg(port->dev, "Setting UART to RS485\n");
+		mr2 |= MCFUART_MR2_TXRTS;
+	}
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
+	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
+	writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
+	writeb(mr1, port->membase + MCFUART_UMR);
+	writeb(mr2, port->membase + MCFUART_UMR);
+	writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
+	writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
+#if defined(CONFIG_M5272)
+	writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
+#endif
+	writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
+		port->membase + MCFUART_UCSR);
+	writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
+		port->membase + MCFUART_UCR);
+	uart_port_unlock_irqrestore(port, flags);
+}
+
+/****************************************************************************/
+
+static void mcf_rx_chars(struct mcf_uart *pp)
+{
+	struct uart_port *port = &pp->port;
+	u8 status, ch, flag;
+
+	while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) {
+		ch = readb(port->membase + MCFUART_URB);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (status & MCFUART_USR_RXERR) {
+			writeb(MCFUART_UCR_CMDRESETERR,
+				port->membase + MCFUART_UCR);
+
+			if (status & MCFUART_USR_RXBREAK) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			} else if (status & MCFUART_USR_RXPARITY) {
+				port->icount.parity++;
+			} else if (status & MCFUART_USR_RXOVERRUN) {
+				port->icount.overrun++;
+			} else if (status & MCFUART_USR_RXFRAMING) {
+				port->icount.frame++;
+			}
+
+			status &= port->read_status_mask;
+
+			if (status & MCFUART_USR_RXBREAK)
+				flag = TTY_BREAK;
+			else if (status & MCFUART_USR_RXPARITY)
+				flag = TTY_PARITY;
+			else if (status & MCFUART_USR_RXFRAMING)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+		uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
+	}
+
+	tty_flip_buffer_push(&port->state->port);
+}
+
+/****************************************************************************/
+
+static void mcf_tx_chars(struct mcf_uart *pp)
+{
+	struct uart_port *port = &pp->port;
+	bool pending;
+	u8 ch;
+
+	pending = uart_port_tx(port, ch,
+		readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY,
+		writeb(ch, port->membase + MCFUART_UTB));
+
+	/* Disable TX to negate RTS automatically */
+	if (!pending && (port->rs485.flags & SER_RS485_ENABLED))
+		writeb(MCFUART_UCR_TXDISABLE, port->membase + MCFUART_UCR);
+}
+
+/****************************************************************************/
+
+static irqreturn_t mcf_interrupt(int irq, void *data)
+{
+	struct uart_port *port = data;
+	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
+	unsigned int isr;
+	irqreturn_t ret = IRQ_NONE;
+
+	isr = readb(port->membase + MCFUART_UISR) & pp->imr;
+
+	uart_port_lock(port);
+	if (isr & MCFUART_UIR_RXREADY) {
+		mcf_rx_chars(pp);
+		ret = IRQ_HANDLED;
+	}
+	if (isr & MCFUART_UIR_TXREADY) {
+		mcf_tx_chars(pp);
+		ret = IRQ_HANDLED;
+	}
+	uart_port_unlock(port);
+
+	return ret;
+}
+
+/****************************************************************************/
+
+static void mcf_config_port(struct uart_port *port, int flags)
+{
+	port->type = PORT_MCF;
+	port->fifosize = MCFUART_TXFIFOSIZE;
+
+	/* Clear mask, so no surprise interrupts. */
+	writeb(0, port->membase + MCFUART_UIMR);
+
+	if (request_irq(port->irq, mcf_interrupt, 0, "UART", port))
+		printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
+			"interrupt vector=%d\n", port->line, port->irq);
+}
+
+/****************************************************************************/
+
+static const char *mcf_type(struct uart_port *port)
+{
+	return (port->type == PORT_MCF) ? "ColdFire UART" : NULL;
+}
+
+/****************************************************************************/
+
+static int mcf_request_port(struct uart_port *port)
+{
+	/* UARTs always present */
+	return 0;
+}
+
+/****************************************************************************/
+
+static void mcf_release_port(struct uart_port *port)
+{
+	/* Nothing to release... */
+}
+
+/****************************************************************************/
+
+static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF))
+		return -EINVAL;
+	return 0;
+}
+
+/****************************************************************************/
+
+/* Enable or disable the RS485 support */
+static int mcf_config_rs485(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485)
+{
+	unsigned char mr1, mr2;
+
+	/* Get mode registers */
+	mr1 = readb(port->membase + MCFUART_UMR);
+	mr2 = readb(port->membase + MCFUART_UMR);
+	if (rs485->flags & SER_RS485_ENABLED) {
+		dev_dbg(port->dev, "Setting UART to RS485\n");
+		/* Automatically negate RTS after TX completes */
+		mr2 |= MCFUART_MR2_TXRTS;
+	} else {
+		dev_dbg(port->dev, "Setting UART to RS232\n");
+		mr2 &= ~MCFUART_MR2_TXRTS;
+	}
+	writeb(mr1, port->membase + MCFUART_UMR);
+	writeb(mr2, port->membase + MCFUART_UMR);
+
+	return 0;
+}
+
+static const struct serial_rs485 mcf_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+};
+
+/****************************************************************************/
+
+/*
+ *	Define the basic serial functions we support.
+ */
+static const struct uart_ops mcf_uart_ops = {
+	.tx_empty	= mcf_tx_empty,
+	.get_mctrl	= mcf_get_mctrl,
+	.set_mctrl	= mcf_set_mctrl,
+	.start_tx	= mcf_start_tx,
+	.stop_tx	= mcf_stop_tx,
+	.stop_rx	= mcf_stop_rx,
+	.break_ctl	= mcf_break_ctl,
+	.startup	= mcf_startup,
+	.shutdown	= mcf_shutdown,
+	.set_termios	= mcf_set_termios,
+	.type		= mcf_type,
+	.request_port	= mcf_request_port,
+	.release_port	= mcf_release_port,
+	.config_port	= mcf_config_port,
+	.verify_port	= mcf_verify_port,
+};
+
+static struct mcf_uart mcf_ports[10];
+
+#define	MCF_MAXPORTS	ARRAY_SIZE(mcf_ports)
+
+/****************************************************************************/
+#if defined(CONFIG_SERIAL_MCF_CONSOLE)
+/****************************************************************************/
+
+static void mcf_console_putc(struct console *co, const char c)
+{
+	struct uart_port *port = &(mcf_ports + co->index)->port;
+	int i;
+
+	for (i = 0; (i < 0x10000); i++) {
+		if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
+			break;
+	}
+	writeb(c, port->membase + MCFUART_UTB);
+	for (i = 0; (i < 0x10000); i++) {
+		if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
+			break;
+	}
+}
+
+/****************************************************************************/
+
+static void mcf_console_write(struct console *co, const char *s, unsigned int count)
+{
+	for (; (count); count--, s++) {
+		mcf_console_putc(co, *s);
+		if (*s == '\n')
+			mcf_console_putc(co, '\r');
+	}
+}
+
+/****************************************************************************/
+
+static int __init mcf_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = CONFIG_SERIAL_MCF_BAUDRATE;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if ((co->index < 0) || (co->index >= MCF_MAXPORTS))
+		co->index = 0;
+	port = &mcf_ports[co->index].port;
+	if (port->membase == 0)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+/****************************************************************************/
+
+static struct uart_driver mcf_driver;
+
+static struct console mcf_console = {
+	.name		= "ttyS",
+	.write		= mcf_console_write,
+	.device		= uart_console_device,
+	.setup		= mcf_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &mcf_driver,
+};
+
+static int __init mcf_console_init(void)
+{
+	register_console(&mcf_console);
+	return 0;
+}
+
+console_initcall(mcf_console_init);
+
+#define	MCF_CONSOLE	&mcf_console
+
+/****************************************************************************/
+#else
+/****************************************************************************/
+
+#define	MCF_CONSOLE	NULL
+
+/****************************************************************************/
+#endif /* CONFIG_SERIAL_MCF_CONSOLE */
+/****************************************************************************/
+
+/*
+ *	Define the mcf UART driver structure.
+ */
+static struct uart_driver mcf_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "mcf",
+	.dev_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= MCF_MAXPORTS,
+	.cons		= MCF_CONSOLE,
+};
+
+/****************************************************************************/
+
+static int mcf_probe(struct platform_device *pdev)
+{
+	struct mcf_platform_uart *platp = dev_get_platdata(&pdev->dev);
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
+		port = &mcf_ports[i].port;
+
+		port->line = i;
+		port->type = PORT_MCF;
+		port->mapbase = platp[i].mapbase;
+		port->membase = (platp[i].membase) ? platp[i].membase :
+			(unsigned char __iomem *) platp[i].mapbase;
+		port->dev = &pdev->dev;
+		port->iotype = SERIAL_IO_MEM;
+		port->irq = platp[i].irq;
+		port->uartclk = MCF_BUSCLK;
+		port->ops = &mcf_uart_ops;
+		port->flags = UPF_BOOT_AUTOCONF;
+		port->rs485_config = mcf_config_rs485;
+		port->rs485_supported = mcf_rs485_supported;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE);
+
+		uart_add_one_port(&mcf_driver, port);
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+
+static void mcf_remove(struct platform_device *pdev)
+{
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; (i < MCF_MAXPORTS); i++) {
+		port = &mcf_ports[i].port;
+		if (port)
+			uart_remove_one_port(&mcf_driver, port);
+	}
+}
+
+/****************************************************************************/
+
+static struct platform_driver mcf_platform_driver = {
+	.probe		= mcf_probe,
+	.remove		= mcf_remove,
+	.driver		= {
+		.name	= "mcfuart",
+	},
+};
+
+/****************************************************************************/
+
+static int __init mcf_init(void)
+{
+	int rc;
+
+	printk("ColdFire internal UART serial driver\n");
+
+	rc = uart_register_driver(&mcf_driver);
+	if (rc)
+		return rc;
+	rc = platform_driver_register(&mcf_platform_driver);
+	if (rc) {
+		uart_unregister_driver(&mcf_driver);
+		return rc;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+
+static void __exit mcf_exit(void)
+{
+	platform_driver_unregister(&mcf_platform_driver);
+	uart_unregister_driver(&mcf_driver);
+}
+
+/****************************************************************************/
+
+module_init(mcf_init);
+module_exit(mcf_exit);
+
+MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>");
+MODULE_DESCRIPTION("Freescale ColdFire UART driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mcfuart");
+
+/****************************************************************************/