Merge tag 'drm-misc-fixes-2026-09-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixesgrafted

A number of fixes:
  - bridge:
    - samsung-dsim: fix GPIO lifetime
  - client: Null pointer dereference fix
  - imagination: error handling fix, page handling fix
  - nouveau: fix reference leaks, double-frees, out-of-bounds accesses,
    use-after-frees, don't reject config without SCDC,  a number of
    workarounds
  - virtio: fix memory leak, reference leaks, null pointer dereference,
    add pixel blend mode, cache coherency fix

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <self@mripard.dev>
Link: https://patch.msgid.link/arU22zzqUGDEco1y@houat

1 files changed, 2690 insertions, 0 deletions

diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
new file mode 100644
index 000000000..7e8284575
--- /dev/null
+++ b/drivers/thunderbolt/tunnel.c
@@ -0,0 +1,2690 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Thunderbolt driver - Tunneling support
+ *
+ * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
+ * Copyright (C) 2019, Intel Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/ktime.h>
+#include <linux/string_helpers.h>
+
+#include "tunnel.h"
+#include "tb.h"
+
+/* PCIe adapters use always HopID of 8 for both directions */
+#define TB_PCI_HOPID			8
+
+#define TB_PCI_PATH_DOWN		0
+#define TB_PCI_PATH_UP			1
+
+#define TB_PCI_PRIORITY			3
+#define TB_PCI_WEIGHT			1
+
+/* USB3 adapters use always HopID of 8 for both directions */
+#define TB_USB3_HOPID			8
+
+#define TB_USB3_PATH_DOWN		0
+#define TB_USB3_PATH_UP			1
+
+#define TB_USB3_PRIORITY		3
+#define TB_USB3_WEIGHT			2
+
+/* DP adapters use HopID 8 for AUX and 9 for Video */
+#define TB_DP_AUX_TX_HOPID		8
+#define TB_DP_AUX_RX_HOPID		8
+#define TB_DP_VIDEO_HOPID		9
+
+#define TB_DP_VIDEO_PATH_OUT		0
+#define TB_DP_AUX_PATH_OUT		1
+#define TB_DP_AUX_PATH_IN		2
+
+#define TB_DP_VIDEO_PRIORITY		1
+#define TB_DP_VIDEO_WEIGHT		1
+
+#define TB_DP_AUX_PRIORITY		2
+#define TB_DP_AUX_WEIGHT		1
+
+/* struct tb_regs_hop::initial_credits is 7 bits wide */
+#define TB_MAX_CREDITS			127
+
+/* Minimum number of credits needed for PCIe path */
+#define TB_MIN_PCIE_CREDITS		6U
+/*
+ * Number of credits we try to allocate for each DMA path if not limited
+ * by the host router baMaxHI.
+ */
+#define TB_DMA_CREDITS			14
+/* Minimum number of credits for DMA path */
+#define TB_MIN_DMA_CREDITS		1
+
+#define TB_DMA_PRIORITY			5
+#define TB_DMA_WEIGHT			1
+
+/*
+ * Reserve additional bandwidth for USB 3.x and PCIe bulk traffic
+ * according to USB4 v2 Connection Manager guide. This ends up reserving
+ * 1500 Mb/s for PCIe and 3000 Mb/s for USB 3.x taking weights into
+ * account.
+ */
+#define USB4_V2_PCI_MIN_BANDWIDTH	(1500 * TB_PCI_WEIGHT)
+#define USB4_V2_USB3_MIN_BANDWIDTH	(1500 * TB_USB3_WEIGHT)
+
+/*
+ * According to VESA spec, the DPRX negotiation shall compete in 5
+ * seconds after tunnel is established. Since at least i915 can runtime
+ * suspend if there is nothing connected, and that it polls any new
+ * connections every 10 seconds, we use 12 seconds here.
+ *
+ * These are in ms.
+ */
+#define TB_DPRX_TIMEOUT			12000
+#define TB_DPRX_WAIT_TIMEOUT		25
+#define TB_DPRX_POLL_DELAY		50
+
+static int dprx_timeout = TB_DPRX_TIMEOUT;
+module_param(dprx_timeout, int, 0444);
+MODULE_PARM_DESC(dprx_timeout,
+		 "DPRX capability read timeout in ms, -1 waits forever (default: "
+		 __MODULE_STRING(TB_DPRX_TIMEOUT) ")");
+
+static unsigned int dma_credits = TB_DMA_CREDITS;
+module_param(dma_credits, uint, 0444);
+MODULE_PARM_DESC(dma_credits, "specify custom credits for DMA tunnels (default: "
+                __MODULE_STRING(TB_DMA_CREDITS) ")");
+
+static bool bw_alloc_mode = true;
+module_param(bw_alloc_mode, bool, 0444);
+MODULE_PARM_DESC(bw_alloc_mode,
+		 "enable bandwidth allocation mode if supported (default: true)");
+
+static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" };
+
+static const char * const tb_event_names[] = {
+	[TB_TUNNEL_ACTIVATED] = "activated",
+	[TB_TUNNEL_CHANGED] = "changed",
+	[TB_TUNNEL_DEACTIVATED] = "deactivated",
+	[TB_TUNNEL_LOW_BANDWIDTH] = "low bandwidth",
+	[TB_TUNNEL_NO_BANDWIDTH] = "insufficient bandwidth",
+};
+
+/* Synchronizes kref_get()/put() of struct tb_tunnel */
+static DEFINE_MUTEX(tb_tunnel_lock);
+
+static inline unsigned int tb_usable_credits(const struct tb_port *port)
+{
+	return port->total_credits - port->ctl_credits;
+}
+
+/**
+ * tb_available_credits() - Available credits for PCIe and DMA
+ * @port: Lane adapter to check
+ * @max_dp_streams: If non-%NULL stores maximum number of simultaneous DP
+ *		    streams possible through this lane adapter
+ *
+ * Return: Number of available credits.
+ */
+static unsigned int tb_available_credits(const struct tb_port *port,
+					 size_t *max_dp_streams)
+{
+	const struct tb_switch *sw = port->sw;
+	int credits, usb3, pcie, spare;
+	size_t ndp;
+
+	usb3 = tb_acpi_may_tunnel_usb3() ? sw->max_usb3_credits : 0;
+	pcie = tb_acpi_may_tunnel_pcie() ? sw->max_pcie_credits : 0;
+
+	if (tb_acpi_is_xdomain_allowed()) {
+		spare = min_not_zero(sw->max_dma_credits, dma_credits);
+		/* Add some credits for potential second DMA tunnel */
+		spare += TB_MIN_DMA_CREDITS;
+	} else {
+		spare = 0;
+	}
+
+	credits = tb_usable_credits(port);
+	if (tb_acpi_may_tunnel_dp()) {
+		/*
+		 * Maximum number of DP streams possible through the
+		 * lane adapter.
+		 */
+		if (sw->min_dp_aux_credits + sw->min_dp_main_credits)
+			ndp = (credits - (usb3 + pcie + spare)) /
+			      (sw->min_dp_aux_credits + sw->min_dp_main_credits);
+		else
+			ndp = 0;
+	} else {
+		ndp = 0;
+	}
+	credits -= ndp * (sw->min_dp_aux_credits + sw->min_dp_main_credits);
+	credits -= usb3;
+
+	if (max_dp_streams)
+		*max_dp_streams = ndp;
+
+	return credits > 0 ? credits : 0;
+}
+
+static void tb_init_pm_support(struct tb_path_hop *hop)
+{
+	struct tb_port *out_port = hop->out_port;
+	struct tb_port *in_port = hop->in_port;
+
+	if (tb_port_is_null(in_port) && tb_port_is_null(out_port) &&
+	    usb4_switch_version(in_port->sw) >= 2)
+		hop->pm_support = true;
+}
+
+static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths,
+					 enum tb_tunnel_type type)
+{
+	struct tb_tunnel *tunnel;
+
+	tunnel = kzalloc_flex(*tunnel, paths, npaths);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->npaths = npaths;
+
+	INIT_LIST_HEAD(&tunnel->list);
+	tunnel->tb = tb;
+	tunnel->type = type;
+	kref_init(&tunnel->kref);
+
+	return tunnel;
+}
+
+static void tb_tunnel_get(struct tb_tunnel *tunnel)
+{
+	mutex_lock(&tb_tunnel_lock);
+	kref_get(&tunnel->kref);
+	mutex_unlock(&tb_tunnel_lock);
+}
+
+static void tb_tunnel_destroy(struct kref *kref)
+{
+	struct tb_tunnel *tunnel = container_of(kref, typeof(*tunnel), kref);
+	int i;
+
+	if (tunnel->destroy)
+		tunnel->destroy(tunnel);
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		if (tunnel->paths[i])
+			tb_path_free(tunnel->paths[i]);
+	}
+
+	kfree(tunnel);
+}
+
+void tb_tunnel_put(struct tb_tunnel *tunnel)
+{
+	mutex_lock(&tb_tunnel_lock);
+	kref_put(&tunnel->kref, tb_tunnel_destroy);
+	mutex_unlock(&tb_tunnel_lock);
+}
+
+/**
+ * tb_tunnel_event() - Notify userspace about tunneling event
+ * @tb: Domain where the event occurred
+ * @event: Event that happened
+ * @type: Type of the tunnel in question
+ * @src_port: Tunnel source port (can be %NULL)
+ * @dst_port: Tunnel destination port (can be %NULL)
+ *
+ * Notifies userspace about tunneling @event in the domain. The tunnel
+ * does not need to exist (e.g the tunnel was not activated because
+ * there is not enough bandwidth). If the @src_port and @dst_port are
+ * given fill in full %TUNNEL_DETAILS environment variable. Otherwise
+ * uses the shorter one (just the tunnel type).
+ */
+void tb_tunnel_event(struct tb *tb, enum tb_tunnel_event event,
+		     enum tb_tunnel_type type,
+		     const struct tb_port *src_port,
+		     const struct tb_port *dst_port)
+{
+	char *envp[3] = { NULL };
+
+	if (WARN_ON_ONCE(event >= ARRAY_SIZE(tb_event_names)))
+		return;
+	if (WARN_ON_ONCE(type >= ARRAY_SIZE(tb_tunnel_names)))
+		return;
+
+	envp[0] = kasprintf(GFP_KERNEL, "TUNNEL_EVENT=%s", tb_event_names[event]);
+	if (!envp[0])
+		return;
+
+	if (src_port != NULL && dst_port != NULL) {
+		envp[1] = kasprintf(GFP_KERNEL, "TUNNEL_DETAILS=%llx:%u <-> %llx:%u (%s)",
+				    tb_route(src_port->sw), src_port->port,
+				    tb_route(dst_port->sw), dst_port->port,
+				    tb_tunnel_names[type]);
+	} else {
+		envp[1] = kasprintf(GFP_KERNEL, "TUNNEL_DETAILS=(%s)",
+				    tb_tunnel_names[type]);
+	}
+
+	if (envp[1])
+		tb_domain_event(tb, envp);
+
+	kfree(envp[1]);
+	kfree(envp[0]);
+}
+
+static inline void tb_tunnel_set_active(struct tb_tunnel *tunnel, bool active)
+{
+	if (active) {
+		tunnel->state = TB_TUNNEL_ACTIVE;
+		tb_tunnel_event(tunnel->tb, TB_TUNNEL_ACTIVATED, tunnel->type,
+				tunnel->src_port, tunnel->dst_port);
+	} else {
+		tunnel->state = TB_TUNNEL_INACTIVE;
+		tb_tunnel_event(tunnel->tb, TB_TUNNEL_DEACTIVATED, tunnel->type,
+				tunnel->src_port, tunnel->dst_port);
+	}
+}
+
+static inline void tb_tunnel_changed(struct tb_tunnel *tunnel)
+{
+	tb_tunnel_event(tunnel->tb, TB_TUNNEL_CHANGED, tunnel->type,
+			tunnel->src_port, tunnel->dst_port);
+}
+
+static int tb_pci_port_ltssm_state_detect(struct tb_port *port)
+{
+	ktime_t timeout = ktime_add_ms(ktime_get(), 500);
+
+	do {
+		int ret;
+
+		ret = usb4_pci_port_ltssm_state(port);
+		if (ret < 0)
+			return ret;
+		if (ret == USB4_PCIE_LTSSM_DETECT)
+			return 0;
+
+		fsleep(50);
+	} while (ktime_before(ktime_get(), timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int tb_pci_pre_activate(struct tb_tunnel *tunnel)
+{
+	struct tb_port *down = tunnel->src_port;
+	struct tb_port *up = tunnel->dst_port;
+	int ret;
+
+	ret = tb_switch_is_usb4(down->sw) ?
+		tb_pci_port_ltssm_state_detect(down) : 0;
+	if (ret)
+		return ret;
+
+	return tb_switch_is_usb4(up->sw) ?
+		tb_pci_port_ltssm_state_detect(up) : 0;
+}
+
+static int tb_pci_set_ext_encapsulation(struct tb_tunnel *tunnel, bool enable)
+{
+	struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw);
+	int ret;
+
+	/* Only supported if both routers are at least USB4 v2 */
+	if ((usb4_switch_version(tunnel->src_port->sw) < 2) ||
+	   (usb4_switch_version(tunnel->dst_port->sw) < 2))
+		return 0;
+
+	if (enable && tb_port_get_link_generation(port) < 4)
+		return 0;
+
+	ret = usb4_pci_port_set_ext_encapsulation(tunnel->src_port, enable);
+	if (ret)
+		return ret;
+
+	/*
+	 * Downstream router could be unplugged so disable of encapsulation
+	 * in upstream router is still possible.
+	 */
+	ret = usb4_pci_port_set_ext_encapsulation(tunnel->dst_port, enable);
+	if (ret) {
+		if (enable)
+			return ret;
+		if (ret != -ENODEV)
+			return ret;
+	}
+
+	tb_tunnel_dbg(tunnel, "extended encapsulation %s\n",
+		      str_enabled_disabled(enable));
+	return 0;
+}
+
+static int tb_pci_activate(struct tb_tunnel *tunnel, bool activate)
+{
+	int res;
+
+	if (activate) {
+		res = tb_pci_set_ext_encapsulation(tunnel, activate);
+		if (res)
+			return res;
+	}
+
+	if (activate)
+		res = tb_pci_port_enable(tunnel->dst_port, activate);
+	else
+		res = tb_pci_port_enable(tunnel->src_port, activate);
+	if (res)
+		return res;
+
+
+	if (activate) {
+		res = tb_pci_port_enable(tunnel->src_port, activate);
+		if (res)
+			return res;
+	} else {
+		/* Downstream router could be unplugged */
+		tb_pci_port_enable(tunnel->dst_port, activate);
+	}
+
+	return activate ? 0 : tb_pci_set_ext_encapsulation(tunnel, activate);
+}
+
+static int tb_pci_init_credits(struct tb_path_hop *hop)
+{
+	struct tb_port *port = hop->in_port;
+	struct tb_switch *sw = port->sw;
+	unsigned int credits;
+
+	if (tb_port_use_credit_allocation(port)) {
+		unsigned int available;
+
+		available = tb_available_credits(port, NULL);
+		credits = min(sw->max_pcie_credits, available);
+
+		if (credits < TB_MIN_PCIE_CREDITS)
+			return -ENOSPC;
+
+		credits = max(TB_MIN_PCIE_CREDITS, credits);
+	} else {
+		if (tb_port_is_null(port))
+			credits = port->bonded ? 32 : 16;
+		else
+			credits = 7;
+	}
+
+	hop->initial_credits = credits;
+	return 0;
+}
+
+static int tb_pci_init_path(struct tb_path *path)
+{
+	struct tb_path_hop *hop;
+
+	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL;
+	path->egress_shared_buffer = TB_PATH_NONE;
+	path->ingress_fc_enable = TB_PATH_ALL;
+	path->ingress_shared_buffer = TB_PATH_NONE;
+	path->priority = TB_PCI_PRIORITY;
+	path->weight = TB_PCI_WEIGHT;
+	path->drop_packages = 0;
+
+	tb_path_for_each_hop(path, hop) {
+		int ret;
+
+		ret = tb_pci_init_credits(hop);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * tb_tunnel_discover_pci() - Discover existing PCIe tunnels
+ * @tb: Pointer to the domain structure
+ * @down: PCIe downstream adapter
+ * @alloc_hopid: Allocate HopIDs from visited ports
+ *
+ * If @down adapter is active, follows the tunnel to the PCIe upstream
+ * adapter and back.
+ *
+ * Return: Pointer to &struct tb_tunnel or %NULL if there was no tunnel.
+ */
+struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down,
+					 bool alloc_hopid)
+{
+	struct tb_tunnel *tunnel;
+	struct tb_path *path;
+
+	if (!tb_pci_port_is_enabled(down))
+		return NULL;
+
+	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_PCI);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->activate = tb_pci_activate;
+	tunnel->src_port = down;
+
+	/*
+	 * Discover both paths even if they are not complete. We will
+	 * clean them up by calling tb_tunnel_deactivate() below in that
+	 * case.
+	 */
+	path = tb_path_discover(down, TB_PCI_HOPID, NULL, -1,
+				&tunnel->dst_port, "PCIe Up", alloc_hopid);
+	if (!path) {
+		/* Just disable the downstream port */
+		tb_pci_port_enable(down, false);
+		goto err_free;
+	}
+	tunnel->paths[TB_PCI_PATH_UP] = path;
+	if (tb_pci_init_path(tunnel->paths[TB_PCI_PATH_UP]))
+		goto err_free;
+
+	path = tb_path_discover(tunnel->dst_port, -1, down, TB_PCI_HOPID, NULL,
+				"PCIe Down", alloc_hopid);
+	if (!path)
+		goto err_deactivate;
+	tunnel->paths[TB_PCI_PATH_DOWN] = path;
+	if (tb_pci_init_path(tunnel->paths[TB_PCI_PATH_DOWN]))
+		goto err_deactivate;
+
+	/* Validate that the tunnel is complete */
+	if (!tb_port_is_pcie_up(tunnel->dst_port)) {
+		tb_port_warn(tunnel->dst_port,
+			     "path does not end on a PCIe adapter, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	if (down != tunnel->src_port) {
+		tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	if (!tb_pci_port_is_enabled(tunnel->dst_port)) {
+		tb_tunnel_warn(tunnel,
+			       "tunnel is not fully activated, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	tb_tunnel_dbg(tunnel, "discovered\n");
+	return tunnel;
+
+err_deactivate:
+	tb_tunnel_deactivate(tunnel);
+err_free:
+	tb_tunnel_put(tunnel);
+
+	return NULL;
+}
+
+/**
+ * tb_tunnel_alloc_pci() - allocate a pci tunnel
+ * @tb: Pointer to the domain structure
+ * @up: PCIe upstream adapter port
+ * @down: PCIe downstream adapter port
+ *
+ * Allocate a PCI tunnel. The ports must be of type TB_TYPE_PCIE_UP and
+ * TB_TYPE_PCIE_DOWN.
+ *
+ * Return: Pointer to @struct tb_tunnel or %NULL on failure.
+ */
+struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up,
+				      struct tb_port *down)
+{
+	struct tb_tunnel *tunnel;
+	struct tb_path *path;
+
+	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_PCI);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->pre_activate = tb_pci_pre_activate;
+	tunnel->activate = tb_pci_activate;
+	tunnel->src_port = down;
+	tunnel->dst_port = up;
+
+	path = tb_path_alloc(tb, down, TB_PCI_HOPID, up, TB_PCI_HOPID, 0,
+			     "PCIe Down");
+	if (!path)
+		goto err_free;
+	tunnel->paths[TB_PCI_PATH_DOWN] = path;
+	if (tb_pci_init_path(path))
+		goto err_free;
+
+	path = tb_path_alloc(tb, up, TB_PCI_HOPID, down, TB_PCI_HOPID, 0,
+			     "PCIe Up");
+	if (!path)
+		goto err_free;
+	tunnel->paths[TB_PCI_PATH_UP] = path;
+	if (tb_pci_init_path(path))
+		goto err_free;
+
+	return tunnel;
+
+err_free:
+	tb_tunnel_put(tunnel);
+	return NULL;
+}
+
+/**
+ * tb_tunnel_reserved_pci() - Amount of bandwidth to reserve for PCIe
+ * @port: Lane 0 adapter
+ * @reserved_up: Upstream bandwidth in Mb/s to reserve
+ * @reserved_down: Downstream bandwidth in Mb/s to reserve
+ *
+ * Can be called to any connected lane 0 adapter to find out how much
+ * bandwidth needs to be left in reserve for possible PCIe bulk traffic.
+ *
+ * Return:
+ * * %true - If there is something to be reserved. Writes the amount to
+ *   @reserved_down/@reserved_up.
+ * * %false - Nothing to be reserved. Leaves @reserved_down/@reserved_up
+ *   unmodified.
+ */
+bool tb_tunnel_reserved_pci(struct tb_port *port, int *reserved_up,
+			    int *reserved_down)
+{
+	if (WARN_ON_ONCE(!port->remote))
+		return false;
+
+	if (!tb_acpi_may_tunnel_pcie())
+		return false;
+
+	if (tb_port_get_link_generation(port) < 4)
+		return false;
+
+	/* Must have PCIe adapters */
+	if (tb_is_upstream_port(port)) {
+		if (!tb_switch_find_port(port->sw, TB_TYPE_PCIE_UP))
+			return false;
+		if (!tb_switch_find_port(port->remote->sw, TB_TYPE_PCIE_DOWN))
+			return false;
+	} else {
+		if (!tb_switch_find_port(port->sw, TB_TYPE_PCIE_DOWN))
+			return false;
+		if (!tb_switch_find_port(port->remote->sw, TB_TYPE_PCIE_UP))
+			return false;
+	}
+
+	*reserved_up = USB4_V2_PCI_MIN_BANDWIDTH;
+	*reserved_down = USB4_V2_PCI_MIN_BANDWIDTH;
+
+	tb_port_dbg(port, "reserving %u/%u Mb/s for PCIe\n", *reserved_up,
+		    *reserved_down);
+	return true;
+}
+
+static bool tb_dp_is_usb4(const struct tb_switch *sw)
+{
+	/* Titan Ridge DP adapters need the same treatment as USB4 */
+	return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw);
+}
+
+static int tb_dp_cm_handshake(struct tb_port *in, struct tb_port *out,
+			      int timeout_msec)
+{
+	ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec);
+	u32 val;
+	int ret;
+
+	/* Both ends need to support this */
+	if (!tb_dp_is_usb4(in->sw) || !tb_dp_is_usb4(out->sw))
+		return 0;
+
+	ret = tb_port_read(out, &val, TB_CFG_PORT,
+			   out->cap_adap + DP_STATUS_CTRL, 1);
+	if (ret)
+		return ret;
+
+	val |= DP_STATUS_CTRL_UF | DP_STATUS_CTRL_CMHS;
+
+	ret = tb_port_write(out, &val, TB_CFG_PORT,
+			    out->cap_adap + DP_STATUS_CTRL, 1);
+	if (ret)
+		return ret;
+
+	do {
+		ret = tb_port_read(out, &val, TB_CFG_PORT,
+				   out->cap_adap + DP_STATUS_CTRL, 1);
+		if (ret)
+			return ret;
+		if (!(val & DP_STATUS_CTRL_CMHS))
+			return 0;
+		usleep_range(100, 150);
+	} while (ktime_before(ktime_get(), timeout));
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Returns maximum possible rate from capability supporting only DP 2.0
+ * and below. Used when DP BW allocation mode is not enabled.
+ */
+static inline u32 tb_dp_cap_get_rate(u32 val)
+{
+	u32 rate = (val & DP_COMMON_CAP_RATE_MASK) >> DP_COMMON_CAP_RATE_SHIFT;
+
+	switch (rate) {
+	case DP_COMMON_CAP_RATE_RBR:
+		return 1620;
+	case DP_COMMON_CAP_RATE_HBR:
+		return 2700;
+	case DP_COMMON_CAP_RATE_HBR2:
+		return 5400;
+	case DP_COMMON_CAP_RATE_HBR3:
+		return 8100;
+	default:
+		return 0;
+	}
+}
+
+/*
+ * Returns maximum possible rate from capability supporting DP 2.1
+ * UHBR20, 13.5 and 10 rates as well. Use only when DP BW allocation
+ * mode is enabled.
+ */
+static inline u32 tb_dp_cap_get_rate_ext(u32 val)
+{
+	if (val & DP_COMMON_CAP_UHBR20)
+		return 20000;
+	else if (val & DP_COMMON_CAP_UHBR13_5)
+		return 13500;
+	else if (val & DP_COMMON_CAP_UHBR10)
+		return 10000;
+
+	return tb_dp_cap_get_rate(val);
+}
+
+static inline bool tb_dp_is_uhbr_rate(unsigned int rate)
+{
+	return rate >= 10000;
+}
+
+static inline u32 tb_dp_cap_set_rate(u32 val, u32 rate)
+{
+	val &= ~DP_COMMON_CAP_RATE_MASK;
+	switch (rate) {
+	default:
+		WARN(1, "invalid rate %u passed, defaulting to 1620 MB/s\n", rate);
+		fallthrough;
+	case 1620:
+		val |= DP_COMMON_CAP_RATE_RBR << DP_COMMON_CAP_RATE_SHIFT;
+		break;
+	case 2700:
+		val |= DP_COMMON_CAP_RATE_HBR << DP_COMMON_CAP_RATE_SHIFT;
+		break;
+	case 5400:
+		val |= DP_COMMON_CAP_RATE_HBR2 << DP_COMMON_CAP_RATE_SHIFT;
+		break;
+	case 8100:
+		val |= DP_COMMON_CAP_RATE_HBR3 << DP_COMMON_CAP_RATE_SHIFT;
+		break;
+	}
+	return val;
+}
+
+static inline u32 tb_dp_cap_get_lanes(u32 val)
+{
+	u32 lanes = (val & DP_COMMON_CAP_LANES_MASK) >> DP_COMMON_CAP_LANES_SHIFT;
+
+	switch (lanes) {
+	case DP_COMMON_CAP_1_LANE:
+		return 1;
+	case DP_COMMON_CAP_2_LANES:
+		return 2;
+	case DP_COMMON_CAP_4_LANES:
+		return 4;
+	default:
+		return 0;
+	}
+}
+
+static inline u32 tb_dp_cap_set_lanes(u32 val, u32 lanes)
+{
+	val &= ~DP_COMMON_CAP_LANES_MASK;
+	switch (lanes) {
+	default:
+		WARN(1, "invalid number of lanes %u passed, defaulting to 1\n",
+		     lanes);
+		fallthrough;
+	case 1:
+		val |= DP_COMMON_CAP_1_LANE << DP_COMMON_CAP_LANES_SHIFT;
+		break;
+	case 2:
+		val |= DP_COMMON_CAP_2_LANES << DP_COMMON_CAP_LANES_SHIFT;
+		break;
+	case 4:
+		val |= DP_COMMON_CAP_4_LANES << DP_COMMON_CAP_LANES_SHIFT;
+		break;
+	}
+	return val;
+}
+
+static unsigned int tb_dp_bandwidth(unsigned int rate, unsigned int lanes)
+{
+	/* Tunneling removes the DP 8b/10b 128/132b encoding */
+	if (tb_dp_is_uhbr_rate(rate))
+		return rate * lanes * 128 / 132;
+	return rate * lanes * 8 / 10;
+}
+
+static int tb_dp_reduce_bandwidth(int max_bw, u32 in_rate, u32 in_lanes,
+				  u32 out_rate, u32 out_lanes, u32 *new_rate,
+				  u32 *new_lanes)
+{
+	static const u32 dp_bw[][2] = {
+		/* Mb/s, lanes */
+		{ 8100, 4 }, /* 25920 Mb/s */
+		{ 5400, 4 }, /* 17280 Mb/s */
+		{ 8100, 2 }, /* 12960 Mb/s */
+		{ 2700, 4 }, /* 8640 Mb/s */
+		{ 5400, 2 }, /* 8640 Mb/s */
+		{ 8100, 1 }, /* 6480 Mb/s */
+		{ 1620, 4 }, /* 5184 Mb/s */
+		{ 5400, 1 }, /* 4320 Mb/s */
+		{ 2700, 2 }, /* 4320 Mb/s */
+		{ 1620, 2 }, /* 2592 Mb/s */
+		{ 2700, 1 }, /* 2160 Mb/s */
+		{ 1620, 1 }, /* 1296 Mb/s */
+	};
+	unsigned int i;
+
+	/*
+	 * Find a combination that can fit into max_bw and does not
+	 * exceed the maximum rate and lanes supported by the DP OUT and
+	 * DP IN adapters.
+	 */
+	for (i = 0; i < ARRAY_SIZE(dp_bw); i++) {
+		if (dp_bw[i][0] > out_rate || dp_bw[i][1] > out_lanes)
+			continue;
+
+		if (dp_bw[i][0] > in_rate || dp_bw[i][1] > in_lanes)
+			continue;
+
+		if (tb_dp_bandwidth(dp_bw[i][0], dp_bw[i][1]) <= max_bw) {
+			*new_rate = dp_bw[i][0];
+			*new_lanes = dp_bw[i][1];
+			return 0;
+		}
+	}
+
+	return -ENOSR;
+}
+
+static int tb_dp_xchg_caps(struct tb_tunnel *tunnel)
+{
+	u32 out_dp_cap, out_rate, out_lanes, in_dp_cap, in_rate, in_lanes, bw;
+	struct tb_port *out = tunnel->dst_port;
+	struct tb_port *in = tunnel->src_port;
+	int ret, max_bw;
+
+	/*
+	 * Copy DP_LOCAL_CAP register to DP_REMOTE_CAP register for
+	 * newer generation hardware.
+	 */
+	if (in->sw->generation < 2 || out->sw->generation < 2)
+		return 0;
+
+	/*
+	 * Perform connection manager handshake between IN and OUT ports
+	 * before capabilities exchange can take place.
+	 */
+	ret = tb_dp_cm_handshake(in, out, 3000);
+	if (ret)
+		return ret;
+
+	/* Read both DP_LOCAL_CAP registers */
+	ret = tb_port_read(in, &in_dp_cap, TB_CFG_PORT,
+			   in->cap_adap + DP_LOCAL_CAP, 1);
+	if (ret)
+		return ret;
+
+	ret = tb_port_read(out, &out_dp_cap, TB_CFG_PORT,
+			   out->cap_adap + DP_LOCAL_CAP, 1);
+	if (ret)
+		return ret;
+
+	/* Write IN local caps to OUT remote caps */
+	ret = tb_port_write(out, &in_dp_cap, TB_CFG_PORT,
+			    out->cap_adap + DP_REMOTE_CAP, 1);
+	if (ret)
+		return ret;
+
+	in_rate = tb_dp_cap_get_rate(in_dp_cap);
+	in_lanes = tb_dp_cap_get_lanes(in_dp_cap);
+	tb_tunnel_dbg(tunnel,
+		      "DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n",
+		      in_rate, in_lanes, tb_dp_bandwidth(in_rate, in_lanes));
+
+	/*
+	 * If the tunnel bandwidth is limited (max_bw is set) then see
+	 * if we need to reduce bandwidth to fit there.
+	 */
+	out_rate = tb_dp_cap_get_rate(out_dp_cap);
+	out_lanes = tb_dp_cap_get_lanes(out_dp_cap);
+	bw = tb_dp_bandwidth(out_rate, out_lanes);
+	tb_tunnel_dbg(tunnel,
+		      "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n",
+		      out_rate, out_lanes, bw);
+
+	if (tb_tunnel_direction_downstream(tunnel))
+		max_bw = tunnel->max_down;
+	else
+		max_bw = tunnel->max_up;
+
+	if (max_bw && bw > max_bw) {
+		u32 new_rate, new_lanes, new_bw;
+
+		ret = tb_dp_reduce_bandwidth(max_bw, in_rate, in_lanes,
+					     out_rate, out_lanes, &new_rate,
+					     &new_lanes);
+		if (ret) {
+			tb_tunnel_info(tunnel, "not enough bandwidth\n");
+			return ret;
+		}
+
+		new_bw = tb_dp_bandwidth(new_rate, new_lanes);
+		tb_tunnel_dbg(tunnel,
+			      "bandwidth reduced to %u Mb/s x%u = %u Mb/s\n",
+			      new_rate, new_lanes, new_bw);
+
+		/*
+		 * Set new rate and number of lanes before writing it to
+		 * the IN port remote caps.
+		 */
+		out_dp_cap = tb_dp_cap_set_rate(out_dp_cap, new_rate);
+		out_dp_cap = tb_dp_cap_set_lanes(out_dp_cap, new_lanes);
+	}
+
+	/*
+	 * Titan Ridge does not disable AUX timers when it gets
+	 * SET_CONFIG with SET_LTTPR_MODE set. This causes problems with
+	 * DP tunneling.
+	 */
+	if (tb_route(out->sw) && tb_switch_is_titan_ridge(out->sw)) {
+		out_dp_cap |= DP_COMMON_CAP_LTTPR_NS;
+		tb_tunnel_dbg(tunnel, "disabling LTTPR\n");
+	}
+
+	return tb_port_write(in, &out_dp_cap, TB_CFG_PORT,
+			     in->cap_adap + DP_REMOTE_CAP, 1);
+}
+
+static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel)
+{
+	int ret, estimated_bw, granularity, tmp;
+	struct tb_port *out = tunnel->dst_port;
+	struct tb_port *in = tunnel->src_port;
+	u32 out_dp_cap, out_rate, out_lanes;
+	u32 in_dp_cap, in_rate, in_lanes;
+	u32 rate, lanes;
+
+	if (!bw_alloc_mode)
+		return 0;
+
+	ret = usb4_dp_port_set_cm_bandwidth_mode_supported(in, true);
+	if (ret)
+		return ret;
+
+	ret = usb4_dp_port_set_group_id(in, in->group->index);
+	if (ret)
+		return ret;
+
+	/*
+	 * Get the non-reduced rate and lanes based on the lowest
+	 * capability of both adapters.
+	 */
+	ret = tb_port_read(in, &in_dp_cap, TB_CFG_PORT,
+			   in->cap_adap + DP_LOCAL_CAP, 1);
+	if (ret)
+		return ret;
+
+	ret = tb_port_read(out, &out_dp_cap, TB_CFG_PORT,
+			   out->cap_adap + DP_LOCAL_CAP, 1);
+	if (ret)
+		return ret;
+
+	in_rate = tb_dp_cap_get_rate(in_dp_cap);
+	in_lanes = tb_dp_cap_get_lanes(in_dp_cap);
+	out_rate = tb_dp_cap_get_rate(out_dp_cap);
+	out_lanes = tb_dp_cap_get_lanes(out_dp_cap);
+
+	rate = min(in_rate, out_rate);
+	lanes = min(in_lanes, out_lanes);
+	tmp = tb_dp_bandwidth(rate, lanes);
+
+	tb_tunnel_dbg(tunnel, "non-reduced bandwidth %u Mb/s x%u = %u Mb/s\n",
+		      rate, lanes, tmp);
+
+	ret = usb4_dp_port_set_nrd(in, rate, lanes);
+	if (ret)
+		return ret;
+
+	/*
+	 * Pick up granularity that supports maximum possible bandwidth.
+	 * For that we use the UHBR rates too.
+	 */
+	in_rate = tb_dp_cap_get_rate_ext(in_dp_cap);
+	out_rate = tb_dp_cap_get_rate_ext(out_dp_cap);
+	rate = min(in_rate, out_rate);
+	tmp = tb_dp_bandwidth(rate, lanes);
+
+	tb_tunnel_dbg(tunnel,
+		      "maximum bandwidth through allocation mode %u Mb/s x%u = %u Mb/s\n",
+		      rate, lanes, tmp);
+
+	for (granularity = 250; tmp / granularity > 255 && granularity <= 1000;
+	     granularity *= 2)
+		;
+
+	tb_tunnel_dbg(tunnel, "granularity %d Mb/s\n", granularity);
+
+	/*
+	 * Returns -EINVAL if granularity above is outside of the
+	 * accepted ranges.
+	 */
+	ret = usb4_dp_port_set_granularity(in, granularity);
+	if (ret)
+		return ret;
+
+	/*
+	 * Bandwidth estimation is pretty much what we have in
+	 * max_up/down fields. For discovery we just read what the
+	 * estimation was set to.
+	 */
+	if (tb_tunnel_direction_downstream(tunnel))
+		estimated_bw = tunnel->max_down;
+	else
+		estimated_bw = tunnel->max_up;
+
+	tb_tunnel_dbg(tunnel, "estimated bandwidth %d Mb/s\n", estimated_bw);
+
+	ret = usb4_dp_port_set_estimated_bandwidth(in, estimated_bw);
+	if (ret)
+		return ret;
+
+	/* Initial allocation should be 0 according the spec */
+	ret = usb4_dp_port_allocate_bandwidth(in, 0);
+	if (ret)
+		return ret;
+
+	tb_tunnel_dbg(tunnel, "bandwidth allocation mode enabled\n");
+	return 0;
+}
+
+static int tb_dp_pre_activate(struct tb_tunnel *tunnel)
+{
+	struct tb_port *in = tunnel->src_port;
+	struct tb_switch *sw = in->sw;
+	struct tb *tb = in->sw->tb;
+	int ret;
+
+	ret = tb_dp_xchg_caps(tunnel);
+	if (ret)
+		return ret;
+
+	if (!tb_switch_is_usb4(sw))
+		return 0;
+
+	if (!usb4_dp_port_bandwidth_mode_supported(in))
+		return 0;
+
+	tb_tunnel_dbg(tunnel, "bandwidth allocation mode supported\n");
+
+	ret = usb4_dp_port_set_cm_id(in, tb->index);
+	if (ret)
+		return ret;
+
+	return tb_dp_bandwidth_alloc_mode_enable(tunnel);
+}
+
+static void tb_dp_post_deactivate(struct tb_tunnel *tunnel)
+{
+	struct tb_port *in = tunnel->src_port;
+
+	if (!usb4_dp_port_bandwidth_mode_supported(in))
+		return;
+	if (usb4_dp_port_bandwidth_mode_enabled(in)) {
+		usb4_dp_port_set_cm_bandwidth_mode_supported(in, false);
+		tb_tunnel_dbg(tunnel, "bandwidth allocation mode disabled\n");
+	}
+}
+
+static ktime_t dprx_timeout_to_ktime(int timeout_msec)
+{
+	return timeout_msec >= 0 ?
+		ktime_add_ms(ktime_get(), timeout_msec) : KTIME_MAX;
+}
+
+static int tb_dp_wait_dprx(struct tb_tunnel *tunnel, int timeout_msec)
+{
+	ktime_t timeout = dprx_timeout_to_ktime(timeout_msec);
+	struct tb_port *in = tunnel->src_port;
+
+	/*
+	 * Wait for DPRX done. Normally it should be already set for
+	 * active tunnel.
+	 */
+	do {
+		u32 val;
+		int ret;
+
+		ret = tb_port_read(in, &val, TB_CFG_PORT,
+				   in->cap_adap + DP_COMMON_CAP, 1);
+		if (ret)
+			return ret;
+
+		if (val & DP_COMMON_CAP_DPRX_DONE)
+			return 0;
+
+		usleep_range(100, 150);
+	} while (ktime_before(ktime_get(), timeout));
+
+	tb_tunnel_dbg(tunnel, "DPRX read timeout\n");
+	return -ETIMEDOUT;
+}
+
+static void tb_dp_dprx_work(struct work_struct *work)
+{
+	struct tb_tunnel *tunnel = container_of(work, typeof(*tunnel), dprx_work.work);
+	struct tb *tb = tunnel->tb;
+
+	if (!tunnel->dprx_canceled) {
+		mutex_lock(&tb->lock);
+		if (tb_dp_is_usb4(tunnel->src_port->sw) &&
+		    tb_dp_wait_dprx(tunnel, TB_DPRX_WAIT_TIMEOUT)) {
+			if (ktime_before(ktime_get(), tunnel->dprx_timeout)) {
+				queue_delayed_work(tb->wq, &tunnel->dprx_work,
+						   msecs_to_jiffies(TB_DPRX_POLL_DELAY));
+				mutex_unlock(&tb->lock);
+				return;
+			}
+		} else {
+			tb_tunnel_set_active(tunnel, true);
+		}
+		mutex_unlock(&tb->lock);
+	}
+
+	if (tunnel->callback)
+		tunnel->callback(tunnel, tunnel->callback_data);
+	tb_tunnel_put(tunnel);
+}
+
+static int tb_dp_dprx_start(struct tb_tunnel *tunnel)
+{
+	/*
+	 * Bump up the reference to keep the tunnel around. It will be
+	 * dropped in tb_dp_dprx_stop() once the tunnel is deactivated.
+	 */
+	tb_tunnel_get(tunnel);
+
+	tunnel->dprx_started = true;
+
+	if (tunnel->callback) {
+		tunnel->dprx_timeout = dprx_timeout_to_ktime(dprx_timeout);
+		queue_delayed_work(tunnel->tb->wq, &tunnel->dprx_work, 0);
+		return -EINPROGRESS;
+	}
+
+	return tb_dp_is_usb4(tunnel->src_port->sw) ?
+		tb_dp_wait_dprx(tunnel, dprx_timeout) : 0;
+}
+
+static void tb_dp_dprx_stop(struct tb_tunnel *tunnel)
+{
+	if (tunnel->dprx_started) {
+		tunnel->dprx_started = false;
+		tunnel->dprx_canceled = true;
+		if (cancel_delayed_work(&tunnel->dprx_work))
+			tb_tunnel_put(tunnel);
+	}
+}
+
+static int tb_dp_activate(struct tb_tunnel *tunnel, bool active)
+{
+	int ret;
+
+	if (active) {
+		struct tb_path **paths;
+		int last;
+
+		paths = tunnel->paths;
+		last = paths[TB_DP_VIDEO_PATH_OUT]->path_length - 1;
+
+		tb_dp_port_set_hops(tunnel->src_port,
+			paths[TB_DP_VIDEO_PATH_OUT]->hops[0].in_hop_index,
+			paths[TB_DP_AUX_PATH_OUT]->hops[0].in_hop_index,
+			paths[TB_DP_AUX_PATH_IN]->hops[last].next_hop_index);
+
+		tb_dp_port_set_hops(tunnel->dst_port,
+			paths[TB_DP_VIDEO_PATH_OUT]->hops[last].next_hop_index,
+			paths[TB_DP_AUX_PATH_IN]->hops[0].in_hop_index,
+			paths[TB_DP_AUX_PATH_OUT]->hops[last].next_hop_index);
+	} else {
+		tb_dp_dprx_stop(tunnel);
+		tb_dp_port_hpd_clear(tunnel->src_port);
+		tb_dp_port_set_hops(tunnel->src_port, 0, 0, 0);
+		if (tb_port_is_dpout(tunnel->dst_port))
+			tb_dp_port_set_hops(tunnel->dst_port, 0, 0, 0);
+	}
+
+	ret = tb_dp_port_enable(tunnel->src_port, active);
+	if (ret)
+		return ret;
+
+	if (tb_port_is_dpout(tunnel->dst_port)) {
+		ret = tb_dp_port_enable(tunnel->dst_port, active);
+		if (ret)
+			return ret;
+	}
+
+	return active ? tb_dp_dprx_start(tunnel) : 0;
+}
+
+/**
+ * tb_dp_bandwidth_mode_maximum_bandwidth() - Maximum possible bandwidth
+ * @tunnel: DP tunnel to check
+ * @max_bw_rounded: Maximum bandwidth in Mb/s rounded up to the next granularity
+ *
+ * Return: Maximum possible bandwidth for this tunnel in Mb/s, negative errno
+ * in case of failure.
+ */
+static int tb_dp_bandwidth_mode_maximum_bandwidth(struct tb_tunnel *tunnel,
+						  int *max_bw_rounded)
+{
+	struct tb_port *in = tunnel->src_port;
+	int ret, rate, lanes, max_bw;
+	u32 cap;
+
+	/*
+	 * DP IN adapter DP_LOCAL_CAP gets updated to the lowest AUX
+	 * read parameter values so we can use this to determine the
+	 * maximum possible bandwidth over this link.
+	 *
+	 * See USB4 v2 spec 1.0 10.4.4.5.
+	 */
+	ret = tb_port_read(in, &cap, TB_CFG_PORT,
+			   in->cap_adap + DP_LOCAL_CAP, 1);
+	if (ret)
+		return ret;
+
+	rate = tb_dp_cap_get_rate_ext(cap);
+	lanes = tb_dp_cap_get_lanes(cap);
+
+	max_bw = tb_dp_bandwidth(rate, lanes);
+
+	if (max_bw_rounded) {
+		ret = usb4_dp_port_granularity(in);
+		if (ret < 0)
+			return ret;
+		*max_bw_rounded = roundup(max_bw, ret);
+	}
+
+	return max_bw;
+}
+
+static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel,
+						   int *consumed_up,
+						   int *consumed_down)
+{
+	struct tb_port *in = tunnel->src_port;
+	int ret, allocated_bw, max_bw_rounded;
+
+	if (!usb4_dp_port_bandwidth_mode_enabled(in))
+		return -EOPNOTSUPP;
+
+	if (!tunnel->bw_mode)
+		return -EOPNOTSUPP;
+
+	/* Read what was allocated previously if any */
+	ret = usb4_dp_port_allocated_bandwidth(in);
+	if (ret < 0)
+		return ret;
+	allocated_bw = ret;
+
+	ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw_rounded);
+	if (ret < 0)
+		return ret;
+	if (allocated_bw == max_bw_rounded)
+		allocated_bw = ret;
+
+	if (tb_tunnel_direction_downstream(tunnel)) {
+		*consumed_up = 0;
+		*consumed_down = allocated_bw;
+	} else {
+		*consumed_up = allocated_bw;
+		*consumed_down = 0;
+	}
+
+	return 0;
+}
+
+static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up,
+				     int *allocated_down)
+{
+	struct tb_port *in = tunnel->src_port;
+
+	/*
+	 * If we have already set the allocated bandwidth then use that.
+	 * Otherwise we read it from the DPRX.
+	 */
+	if (usb4_dp_port_bandwidth_mode_enabled(in) && tunnel->bw_mode) {
+		int ret, allocated_bw, max_bw_rounded;
+
+		ret = usb4_dp_port_allocated_bandwidth(in);
+		if (ret < 0)
+			return ret;
+		allocated_bw = ret;
+
+		ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel,
+							     &max_bw_rounded);
+		if (ret < 0)
+			return ret;
+		if (allocated_bw == max_bw_rounded)
+			allocated_bw = ret;
+
+		if (tb_tunnel_direction_downstream(tunnel)) {
+			*allocated_up = 0;
+			*allocated_down = allocated_bw;
+		} else {
+			*allocated_up = allocated_bw;
+			*allocated_down = 0;
+		}
+		return 0;
+	}
+
+	return tunnel->consumed_bandwidth(tunnel, allocated_up,
+					  allocated_down);
+}
+
+static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up,
+				 int *alloc_down)
+{
+	struct tb_port *in = tunnel->src_port;
+	int max_bw_rounded, ret, tmp;
+
+	if (!usb4_dp_port_bandwidth_mode_enabled(in))
+		return -EOPNOTSUPP;
+
+	ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw_rounded);
+	if (ret < 0)
+		return ret;
+
+	if (tb_tunnel_direction_downstream(tunnel)) {
+		tmp = min(*alloc_down, max_bw_rounded);
+		ret = usb4_dp_port_allocate_bandwidth(in, tmp);
+		if (ret)
+			return ret;
+		*alloc_down = tmp;
+		*alloc_up = 0;
+	} else {
+		tmp = min(*alloc_up, max_bw_rounded);
+		ret = usb4_dp_port_allocate_bandwidth(in, tmp);
+		if (ret)
+			return ret;
+		*alloc_down = 0;
+		*alloc_up = tmp;
+	}
+
+	/* Now we can use BW mode registers to figure out the bandwidth */
+	/* TODO: need to handle discovery too */
+	tunnel->bw_mode = true;
+	return 0;
+}
+
+/* Read cap from tunnel DP IN */
+static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate,
+			  u32 *lanes)
+{
+	struct tb_port *in = tunnel->src_port;
+	u32 val;
+	int ret;
+
+	switch (cap) {
+	case DP_LOCAL_CAP:
+	case DP_REMOTE_CAP:
+	case DP_COMMON_CAP:
+		break;
+
+	default:
+		tb_tunnel_WARN(tunnel, "invalid capability index %#x\n", cap);
+		return -EINVAL;
+	}
+
+	/*
+	 * Read from the copied remote cap so that we take into account
+	 * if capabilities were reduced during exchange.
+	 */
+	ret = tb_port_read(in, &val, TB_CFG_PORT, in->cap_adap + cap, 1);
+	if (ret)
+		return ret;
+
+	*rate = tb_dp_cap_get_rate(val);
+	*lanes = tb_dp_cap_get_lanes(val);
+	return 0;
+}
+
+static int tb_dp_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up,
+				   int *max_down)
+{
+	int ret;
+
+	if (!usb4_dp_port_bandwidth_mode_enabled(tunnel->src_port))
+		return -EOPNOTSUPP;
+
+	ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, NULL);
+	if (ret < 0)
+		return ret;
+
+	if (tb_tunnel_direction_downstream(tunnel)) {
+		*max_up = 0;
+		*max_down = ret;
+	} else {
+		*max_up = ret;
+		*max_down = 0;
+	}
+
+	return 0;
+}
+
+static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up,
+				    int *consumed_down)
+{
+	const struct tb_switch *sw = tunnel->src_port->sw;
+	u32 rate = 0, lanes = 0;
+	int ret;
+
+	if (tb_dp_is_usb4(sw)) {
+		ret = tb_dp_wait_dprx(tunnel, 0);
+		if (ret) {
+			if (ret == -ETIMEDOUT) {
+				/*
+				 * While we wait for DPRX complete the
+				 * tunnel consumes as much as it had
+				 * been reserved initially.
+				 */
+				ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP,
+						     &rate, &lanes);
+				if (ret)
+					return ret;
+			} else {
+				return ret;
+			}
+		} else {
+			/*
+			 * On USB4 routers check if the bandwidth allocation
+			 * mode is enabled first and then read the bandwidth
+			 * through those registers.
+			 */
+			ret = tb_dp_bandwidth_mode_consumed_bandwidth(tunnel, consumed_up,
+								      consumed_down);
+			if (ret < 0) {
+				if (ret != -EOPNOTSUPP)
+					return ret;
+			} else if (!ret) {
+				return 0;
+			}
+			ret = tb_dp_read_cap(tunnel, DP_COMMON_CAP, &rate, &lanes);
+			if (ret)
+				return ret;
+		}
+	} else if (sw->generation >= 2) {
+		ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, &rate, &lanes);
+		if (ret)
+			return ret;
+	} else {
+		/* No bandwidth management for legacy devices  */
+		*consumed_up = 0;
+		*consumed_down = 0;
+		return 0;
+	}
+
+	if (tb_tunnel_direction_downstream(tunnel)) {
+		*consumed_up = 0;
+		*consumed_down = tb_dp_bandwidth(rate, lanes);
+	} else {
+		*consumed_up = tb_dp_bandwidth(rate, lanes);
+		*consumed_down = 0;
+	}
+
+	return 0;
+}
+
+static void tb_dp_init_aux_credits(struct tb_path_hop *hop)
+{
+	struct tb_port *port = hop->in_port;
+	struct tb_switch *sw = port->sw;
+
+	if (tb_port_use_credit_allocation(port))
+		hop->initial_credits = sw->min_dp_aux_credits;
+	else
+		hop->initial_credits = 1;
+}
+
+static void tb_dp_init_aux_path(struct tb_path *path, bool pm_support)
+{
+	struct tb_path_hop *hop;
+
+	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL;
+	path->egress_shared_buffer = TB_PATH_NONE;
+	path->ingress_fc_enable = TB_PATH_ALL;
+	path->ingress_shared_buffer = TB_PATH_NONE;
+	path->priority = TB_DP_AUX_PRIORITY;
+	path->weight = TB_DP_AUX_WEIGHT;
+
+	tb_path_for_each_hop(path, hop) {
+		tb_dp_init_aux_credits(hop);
+		if (pm_support)
+			tb_init_pm_support(hop);
+	}
+}
+
+static int tb_dp_init_video_credits(struct tb_path_hop *hop)
+{
+	struct tb_port *port = hop->in_port;
+	struct tb_switch *sw = port->sw;
+
+	if (tb_port_use_credit_allocation(port)) {
+		unsigned int nfc_credits;
+		size_t max_dp_streams;
+
+		tb_available_credits(port, &max_dp_streams);
+		/*
+		 * Read the number of currently allocated NFC credits
+		 * from the lane adapter. Since we only use them for DP
+		 * tunneling we can use that to figure out how many DP
+		 * tunnels already go through the lane adapter.
+		 */
+		nfc_credits = port->config.nfc_credits &
+				ADP_CS_4_NFC_BUFFERS_MASK;
+		if (nfc_credits / sw->min_dp_main_credits > max_dp_streams)
+			return -ENOSPC;
+
+		hop->nfc_credits = sw->min_dp_main_credits;
+	} else {
+		hop->nfc_credits = min(port->total_credits - 2, 12U);
+	}
+
+	return 0;
+}
+
+static int tb_dp_init_video_path(struct tb_path *path, bool pm_support)
+{
+	struct tb_path_hop *hop;
+
+	path->egress_fc_enable = TB_PATH_NONE;
+	path->egress_shared_buffer = TB_PATH_NONE;
+	path->ingress_fc_enable = TB_PATH_NONE;
+	path->ingress_shared_buffer = TB_PATH_NONE;
+	path->priority = TB_DP_VIDEO_PRIORITY;
+	path->weight = TB_DP_VIDEO_WEIGHT;
+
+	tb_path_for_each_hop(path, hop) {
+		int ret;
+
+		ret = tb_dp_init_video_credits(hop);
+		if (ret)
+			return ret;
+		if (pm_support)
+			tb_init_pm_support(hop);
+	}
+
+	return 0;
+}
+
+static void tb_dp_dump(struct tb_tunnel *tunnel)
+{
+	struct tb_port *in, *out;
+	u32 dp_cap, rate, lanes;
+
+	in = tunnel->src_port;
+	out = tunnel->dst_port;
+
+	if (tb_port_read(in, &dp_cap, TB_CFG_PORT,
+			 in->cap_adap + DP_LOCAL_CAP, 1))
+		return;
+
+	rate = tb_dp_cap_get_rate(dp_cap);
+	lanes = tb_dp_cap_get_lanes(dp_cap);
+
+	tb_tunnel_dbg(tunnel,
+		      "DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n",
+		      rate, lanes, tb_dp_bandwidth(rate, lanes));
+
+	if (tb_port_read(out, &dp_cap, TB_CFG_PORT,
+			 out->cap_adap + DP_LOCAL_CAP, 1))
+		return;
+
+	rate = tb_dp_cap_get_rate(dp_cap);
+	lanes = tb_dp_cap_get_lanes(dp_cap);
+
+	tb_tunnel_dbg(tunnel,
+		      "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n",
+		      rate, lanes, tb_dp_bandwidth(rate, lanes));
+
+	if (tb_port_read(in, &dp_cap, TB_CFG_PORT,
+			 in->cap_adap + DP_REMOTE_CAP, 1))
+		return;
+
+	rate = tb_dp_cap_get_rate(dp_cap);
+	lanes = tb_dp_cap_get_lanes(dp_cap);
+
+	tb_tunnel_dbg(tunnel, "reduced bandwidth %u Mb/s x%u = %u Mb/s\n",
+		      rate, lanes, tb_dp_bandwidth(rate, lanes));
+}
+
+/**
+ * tb_tunnel_discover_dp() - Discover existing Display Port tunnels
+ * @tb: Pointer to the domain structure
+ * @in: DP in adapter
+ * @alloc_hopid: Allocate HopIDs from visited ports
+ *
+ * If @in adapter is active, follows the tunnel to the DP out adapter
+ * and back. Returns the discovered tunnel or %NULL if there was no
+ * tunnel.
+ *
+ * Return: Pointer to &struct tb_tunnel or %NULL if no tunnel found.
+ */
+struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in,
+					bool alloc_hopid)
+{
+	struct tb_tunnel *tunnel;
+	struct tb_port *port;
+	struct tb_path *path;
+
+	if (!tb_dp_port_is_enabled(in))
+		return NULL;
+
+	tunnel = tb_tunnel_alloc(tb, 3, TB_TUNNEL_DP);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->pre_activate = tb_dp_pre_activate;
+	tunnel->activate = tb_dp_activate;
+	tunnel->post_deactivate = tb_dp_post_deactivate;
+	tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth;
+	tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth;
+	tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth;
+	tunnel->consumed_bandwidth = tb_dp_consumed_bandwidth;
+	tunnel->src_port = in;
+
+	path = tb_path_discover(in, TB_DP_VIDEO_HOPID, NULL, -1,
+				&tunnel->dst_port, "Video", alloc_hopid);
+	if (!path) {
+		/* Just disable the DP IN port */
+		tb_dp_port_enable(in, false);
+		goto err_free;
+	}
+	tunnel->paths[TB_DP_VIDEO_PATH_OUT] = path;
+	if (tb_dp_init_video_path(tunnel->paths[TB_DP_VIDEO_PATH_OUT], false))
+		goto err_free;
+
+	path = tb_path_discover(in, TB_DP_AUX_TX_HOPID, NULL, -1, NULL, "AUX TX",
+				alloc_hopid);
+	if (!path)
+		goto err_deactivate;
+	tunnel->paths[TB_DP_AUX_PATH_OUT] = path;
+	tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_OUT], false);
+
+	path = tb_path_discover(tunnel->dst_port, -1, in, TB_DP_AUX_RX_HOPID,
+				&port, "AUX RX", alloc_hopid);
+	if (!path)
+		goto err_deactivate;
+	tunnel->paths[TB_DP_AUX_PATH_IN] = path;
+	tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_IN], false);
+
+	/* Validate that the tunnel is complete */
+	if (!tb_port_is_dpout(tunnel->dst_port)) {
+		tb_port_warn(in, "path does not end on a DP adapter, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	if (!tb_dp_port_is_enabled(tunnel->dst_port))
+		goto err_deactivate;
+
+	if (!tb_dp_port_hpd_is_active(tunnel->dst_port))
+		goto err_deactivate;
+
+	if (port != tunnel->src_port) {
+		tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	tb_dp_dump(tunnel);
+
+	tb_tunnel_dbg(tunnel, "discovered\n");
+	return tunnel;
+
+err_deactivate:
+	tb_tunnel_deactivate(tunnel);
+err_free:
+	tb_tunnel_put(tunnel);
+
+	return NULL;
+}
+
+/**
+ * tb_tunnel_alloc_dp() - allocate a Display Port tunnel
+ * @tb: Pointer to the domain structure
+ * @in: DP in adapter port
+ * @out: DP out adapter port
+ * @link_nr: Preferred lane adapter when the link is not bonded
+ * @max_up: Maximum available upstream bandwidth for the DP tunnel.
+ *	    %0 if no available bandwidth.
+ * @max_down: Maximum available downstream bandwidth for the DP tunnel.
+ *	      %0 if no available bandwidth.
+ * @callback: Optional callback that is called when the DP tunnel is
+ *	      fully activated (or there is an error)
+ * @callback_data: Optional data for @callback
+ *
+ * Allocates a tunnel between @in and @out that is capable of tunneling
+ * Display Port traffic. If @callback is not %NULL it will be called
+ * after tb_tunnel_activate() once the tunnel has been fully activated.
+ * It can call tb_tunnel_is_active() to check if activation was
+ * successful (or if it returns %false there was some sort of issue).
+ * The @callback is called without @tb->lock held.
+ *
+ * Return: Pointer to @struct tb_tunnel or %NULL in case of failure.
+ */
+struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in,
+				     struct tb_port *out, int link_nr,
+				     int max_up, int max_down,
+				     void (*callback)(struct tb_tunnel *, void *),
+				     void *callback_data)
+{
+	struct tb_tunnel *tunnel;
+	struct tb_path **paths;
+	struct tb_path *path;
+	bool pm_support;
+
+	if (WARN_ON(!in->cap_adap || !out->cap_adap))
+		return NULL;
+
+	tunnel = tb_tunnel_alloc(tb, 3, TB_TUNNEL_DP);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->pre_activate = tb_dp_pre_activate;
+	tunnel->activate = tb_dp_activate;
+	tunnel->post_deactivate = tb_dp_post_deactivate;
+	tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth;
+	tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth;
+	tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth;
+	tunnel->consumed_bandwidth = tb_dp_consumed_bandwidth;
+	tunnel->src_port = in;
+	tunnel->dst_port = out;
+	tunnel->max_up = max_up;
+	tunnel->max_down = max_down;
+	tunnel->callback = callback;
+	tunnel->callback_data = callback_data;
+	INIT_DELAYED_WORK(&tunnel->dprx_work, tb_dp_dprx_work);
+
+	paths = tunnel->paths;
+	pm_support = usb4_switch_version(in->sw) >= 2;
+
+	path = tb_path_alloc(tb, in, TB_DP_VIDEO_HOPID, out, TB_DP_VIDEO_HOPID,
+			     link_nr, "Video");
+	if (!path)
+		goto err_free;
+	tb_dp_init_video_path(path, pm_support);
+	paths[TB_DP_VIDEO_PATH_OUT] = path;
+
+	path = tb_path_alloc(tb, in, TB_DP_AUX_TX_HOPID, out,
+			     TB_DP_AUX_TX_HOPID, link_nr, "AUX TX");
+	if (!path)
+		goto err_free;
+	tb_dp_init_aux_path(path, pm_support);
+	paths[TB_DP_AUX_PATH_OUT] = path;
+
+	path = tb_path_alloc(tb, out, TB_DP_AUX_RX_HOPID, in,
+			     TB_DP_AUX_RX_HOPID, link_nr, "AUX RX");
+	if (!path)
+		goto err_free;
+	tb_dp_init_aux_path(path, pm_support);
+	paths[TB_DP_AUX_PATH_IN] = path;
+
+	return tunnel;
+
+err_free:
+	tb_tunnel_put(tunnel);
+	return NULL;
+}
+
+static unsigned int tb_dma_available_credits(const struct tb_port *port)
+{
+	const struct tb_switch *sw = port->sw;
+	int credits;
+
+	credits = tb_available_credits(port, NULL);
+	if (tb_acpi_may_tunnel_pcie())
+		credits -= sw->max_pcie_credits;
+	credits -= port->dma_credits;
+
+	return credits > 0 ? credits : 0;
+}
+
+static int tb_dma_reserve_credits(struct tb_path_hop *hop, unsigned int credits)
+{
+	struct tb_port *port = hop->in_port;
+
+	if (tb_port_use_credit_allocation(port)) {
+		unsigned int available = tb_dma_available_credits(port);
+
+		/*
+		 * Need to have at least TB_MIN_DMA_CREDITS, otherwise
+		 * DMA path cannot be established.
+		 */
+		if (available < TB_MIN_DMA_CREDITS)
+			return -ENOSPC;
+
+		credits = min(credits, available);
+
+		tb_port_dbg(port, "reserving %u credits for DMA path\n",
+			    credits);
+
+		port->dma_credits += credits;
+	} else {
+		if (tb_port_is_null(port))
+			credits = port->bonded ? 14 : 6;
+		else
+			credits = min(port->total_credits, credits);
+	}
+
+	hop->initial_credits = credits;
+	return 0;
+}
+
+/* Path from lane adapter to NHI */
+static int tb_dma_init_rx_path(struct tb_path *path, unsigned int credits)
+{
+	struct tb_path_hop *hop;
+	unsigned int i, tmp;
+
+	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL;
+	path->ingress_fc_enable = TB_PATH_ALL;
+	path->egress_shared_buffer = TB_PATH_NONE;
+	path->ingress_shared_buffer = TB_PATH_NONE;
+	path->priority = TB_DMA_PRIORITY;
+	path->weight = TB_DMA_WEIGHT;
+	path->clear_fc = true;
+
+	/*
+	 * First lane adapter is the one connected to the remote host.
+	 * We don't tunnel other traffic over this link so we can use
+	 * all the credits (except the ones reserved for control traffic).
+	 */
+	hop = &path->hops[0];
+	tmp = min(tb_usable_credits(hop->in_port), credits);
+	hop->initial_credits = tmp;
+	hop->in_port->dma_credits += tmp;
+
+	for (i = 1; i < path->path_length; i++) {
+		int ret;
+
+		ret = tb_dma_reserve_credits(&path->hops[i], credits);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Path from NHI to lane adapter */
+static int tb_dma_init_tx_path(struct tb_path *path, unsigned int credits)
+{
+	struct tb_path_hop *hop;
+
+	path->egress_fc_enable = TB_PATH_ALL;
+	path->ingress_fc_enable = TB_PATH_ALL;
+	path->egress_shared_buffer = TB_PATH_NONE;
+	path->ingress_shared_buffer = TB_PATH_NONE;
+	path->priority = TB_DMA_PRIORITY;
+	path->weight = TB_DMA_WEIGHT;
+	path->clear_fc = true;
+
+	tb_path_for_each_hop(path, hop) {
+		int ret;
+
+		ret = tb_dma_reserve_credits(hop, credits);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void tb_dma_release_credits(struct tb_path_hop *hop)
+{
+	struct tb_port *port = hop->in_port;
+
+	if (tb_port_use_credit_allocation(port)) {
+		port->dma_credits -= hop->initial_credits;
+
+		tb_port_dbg(port, "released %u DMA path credits\n",
+			    hop->initial_credits);
+	}
+}
+
+static void tb_dma_destroy_path(struct tb_path *path)
+{
+	struct tb_path_hop *hop;
+
+	tb_path_for_each_hop(path, hop)
+		tb_dma_release_credits(hop);
+}
+
+static void tb_dma_destroy(struct tb_tunnel *tunnel)
+{
+	int i;
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		if (!tunnel->paths[i])
+			continue;
+		tb_dma_destroy_path(tunnel->paths[i]);
+	}
+}
+
+/**
+ * tb_tunnel_alloc_dma() - allocate a DMA tunnel
+ * @tb: Pointer to the domain structure
+ * @nhi: Host controller port
+ * @dst: Destination null port which the other domain is connected to
+ * @transmit_path: HopID used for transmitting packets
+ * @transmit_ring: NHI ring number used to send packets towards the
+ *		   other domain. Set to %-1 if TX path is not needed.
+ * @receive_path: HopID used for receiving packets
+ * @receive_ring: NHI ring number used to receive packets from the
+ *		  other domain. Set to %-1 if RX path is not needed.
+ *
+ * Return: Pointer to @struct tb_tunnel or %NULL in case of failure.
+ */
+struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi,
+				      struct tb_port *dst, int transmit_path,
+				      int transmit_ring, int receive_path,
+				      int receive_ring)
+{
+	struct tb_tunnel *tunnel;
+	size_t npaths = 0, i = 0;
+	struct tb_path *path;
+	unsigned int credits;
+
+	/* Ring 0 is reserved for control channel */
+	if (WARN_ON(!receive_ring || !transmit_ring))
+		return NULL;
+
+	if (receive_ring > 0)
+		npaths++;
+	if (transmit_ring > 0)
+		npaths++;
+
+	if (WARN_ON(!npaths))
+		return NULL;
+
+	tunnel = tb_tunnel_alloc(tb, npaths, TB_TUNNEL_DMA);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->src_port = nhi;
+	tunnel->dst_port = dst;
+	tunnel->destroy = tb_dma_destroy;
+
+	credits = min_not_zero(dma_credits, nhi->sw->max_dma_credits);
+	if (credits > TB_MAX_CREDITS) {
+		tb_tunnel_dbg(tunnel, "%u credits do not fit a hop, using %u\n",
+			      credits, TB_MAX_CREDITS);
+		credits = TB_MAX_CREDITS;
+	}
+
+	if (receive_ring > 0) {
+		path = tb_path_alloc(tb, dst, receive_path, nhi, receive_ring, 0,
+				     "DMA RX");
+		if (!path)
+			goto err_free;
+		tunnel->paths[i++] = path;
+		if (tb_dma_init_rx_path(path, credits)) {
+			tb_tunnel_dbg(tunnel, "not enough buffers for RX path\n");
+			goto err_free;
+		}
+	}
+
+	if (transmit_ring > 0) {
+		path = tb_path_alloc(tb, nhi, transmit_ring, dst, transmit_path, 0,
+				     "DMA TX");
+		if (!path)
+			goto err_free;
+		tunnel->paths[i++] = path;
+		if (tb_dma_init_tx_path(path, credits)) {
+			tb_tunnel_dbg(tunnel, "not enough buffers for TX path\n");
+			goto err_free;
+		}
+	}
+
+	return tunnel;
+
+err_free:
+	tb_tunnel_put(tunnel);
+	return NULL;
+}
+
+/**
+ * tb_tunnel_match_dma() - Match DMA tunnel
+ * @tunnel: Tunnel to match
+ * @transmit_path: HopID used for transmitting packets. Pass %-1 to ignore.
+ * @transmit_ring: NHI ring number used to send packets towards the
+ *		   other domain. Pass %-1 to ignore.
+ * @receive_path: HopID used for receiving packets. Pass %-1 to ignore.
+ * @receive_ring: NHI ring number used to receive packets from the
+ *		  other domain. Pass %-1 to ignore.
+ *
+ * This function can be used to match specific DMA tunnel, if there are
+ * multiple DMA tunnels going through the same XDomain connection.
+ *
+ * Return: %true if there is a match, %false otherwise.
+ */
+bool tb_tunnel_match_dma(const struct tb_tunnel *tunnel, int transmit_path,
+			 int transmit_ring, int receive_path, int receive_ring)
+{
+	const struct tb_path *tx_path = NULL, *rx_path = NULL;
+	int i;
+
+	if (!receive_ring || !transmit_ring)
+		return false;
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		const struct tb_path *path = tunnel->paths[i];
+
+		if (!path)
+			continue;
+
+		if (tb_port_is_nhi(path->hops[0].in_port))
+			tx_path = path;
+		else if (tb_port_is_nhi(path->hops[path->path_length - 1].out_port))
+			rx_path = path;
+	}
+
+	if (transmit_ring > 0 || transmit_path > 0) {
+		if (!tx_path)
+			return false;
+		if (transmit_ring > 0 &&
+		    (tx_path->hops[0].in_hop_index != transmit_ring))
+			return false;
+		if (transmit_path > 0 &&
+		    (tx_path->hops[tx_path->path_length - 1].next_hop_index != transmit_path))
+			return false;
+	}
+
+	if (receive_ring > 0 || receive_path > 0) {
+		if (!rx_path)
+			return false;
+		if (receive_path > 0 &&
+		    (rx_path->hops[0].in_hop_index != receive_path))
+			return false;
+		if (receive_ring > 0 &&
+		    (rx_path->hops[rx_path->path_length - 1].next_hop_index != receive_ring))
+			return false;
+	}
+
+	return true;
+}
+
+static int tb_usb3_max_link_rate(struct tb_port *up, struct tb_port *down)
+{
+	int ret, up_max_rate, down_max_rate;
+
+	ret = usb4_usb3_port_max_link_rate(up);
+	if (ret < 0)
+		return ret;
+	up_max_rate = ret;
+
+	ret = usb4_usb3_port_max_link_rate(down);
+	if (ret < 0)
+		return ret;
+	down_max_rate = ret;
+
+	return min(up_max_rate, down_max_rate);
+}
+
+static int tb_usb3_pre_activate(struct tb_tunnel *tunnel)
+{
+	tb_tunnel_dbg(tunnel, "allocating initial bandwidth %d/%d Mb/s\n",
+		      tunnel->allocated_up, tunnel->allocated_down);
+
+	return usb4_usb3_port_allocate_bandwidth(tunnel->src_port,
+						 &tunnel->allocated_up,
+						 &tunnel->allocated_down);
+}
+
+static int tb_usb3_activate(struct tb_tunnel *tunnel, bool activate)
+{
+	int res;
+
+	res = tb_usb3_port_enable(tunnel->src_port, activate);
+	if (res)
+		return res;
+
+	if (tb_port_is_usb3_up(tunnel->dst_port))
+		return tb_usb3_port_enable(tunnel->dst_port, activate);
+
+	return 0;
+}
+
+static int tb_usb3_consumed_bandwidth(struct tb_tunnel *tunnel,
+		int *consumed_up, int *consumed_down)
+{
+	struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw);
+	int pcie_weight = tb_acpi_may_tunnel_pcie() ? TB_PCI_WEIGHT : 0;
+
+	/*
+	 * PCIe tunneling, if enabled, affects the USB3 bandwidth so
+	 * take that into account here.
+	 */
+	*consumed_up = tunnel->allocated_up *
+		(TB_USB3_WEIGHT + pcie_weight) / TB_USB3_WEIGHT;
+	*consumed_down = tunnel->allocated_down *
+		(TB_USB3_WEIGHT + pcie_weight) / TB_USB3_WEIGHT;
+
+	if (tb_port_get_link_generation(port) >= 4) {
+		*consumed_up = max(*consumed_up, USB4_V2_USB3_MIN_BANDWIDTH);
+		*consumed_down = max(*consumed_down, USB4_V2_USB3_MIN_BANDWIDTH);
+	}
+
+	return 0;
+}
+
+static int tb_usb3_release_unused_bandwidth(struct tb_tunnel *tunnel)
+{
+	int ret;
+
+	ret = usb4_usb3_port_release_bandwidth(tunnel->src_port,
+					       &tunnel->allocated_up,
+					       &tunnel->allocated_down);
+	if (ret)
+		return ret;
+
+	tb_tunnel_dbg(tunnel, "decreased bandwidth allocation to %d/%d Mb/s\n",
+		      tunnel->allocated_up, tunnel->allocated_down);
+	return 0;
+}
+
+static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel,
+						int *available_up,
+						int *available_down)
+{
+	int ret, max_rate, allocate_up, allocate_down;
+
+	ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port);
+	if (ret < 0) {
+		tb_tunnel_warn(tunnel, "failed to read maximum link rate\n");
+		return;
+	}
+
+	/*
+	 * 90% of the max rate can be allocated for isochronous
+	 * transfers.
+	 */
+	max_rate = ret * 90 / 100;
+
+	/* No need to reclaim if already at maximum */
+	if (tunnel->allocated_up >= max_rate &&
+	    tunnel->allocated_down >= max_rate)
+		return;
+
+	/* Don't go lower than what is already allocated */
+	allocate_up = min(max_rate, *available_up);
+	if (allocate_up < tunnel->allocated_up)
+		allocate_up = tunnel->allocated_up;
+
+	allocate_down = min(max_rate, *available_down);
+	if (allocate_down < tunnel->allocated_down)
+		allocate_down = tunnel->allocated_down;
+
+	/* If no changes no need to do more */
+	if (allocate_up == tunnel->allocated_up &&
+	    allocate_down == tunnel->allocated_down)
+		return;
+
+	ret = usb4_usb3_port_allocate_bandwidth(tunnel->src_port, &allocate_up,
+						&allocate_down);
+	if (ret) {
+		tb_tunnel_info(tunnel, "failed to allocate bandwidth\n");
+		return;
+	}
+
+	tunnel->allocated_up = allocate_up;
+	*available_up -= tunnel->allocated_up;
+
+	tunnel->allocated_down = allocate_down;
+	*available_down -= tunnel->allocated_down;
+
+	tb_tunnel_dbg(tunnel, "increased bandwidth allocation to %d/%d Mb/s\n",
+		      tunnel->allocated_up, tunnel->allocated_down);
+}
+
+static void tb_usb3_init_credits(struct tb_path_hop *hop)
+{
+	struct tb_port *port = hop->in_port;
+	struct tb_switch *sw = port->sw;
+	unsigned int credits;
+
+	if (tb_port_use_credit_allocation(port)) {
+		credits = sw->max_usb3_credits;
+	} else {
+		if (tb_port_is_null(port))
+			credits = port->bonded ? 32 : 16;
+		else
+			credits = 7;
+	}
+
+	hop->initial_credits = credits;
+}
+
+static void tb_usb3_init_path(struct tb_path *path)
+{
+	struct tb_path_hop *hop;
+
+	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL;
+	path->egress_shared_buffer = TB_PATH_NONE;
+	path->ingress_fc_enable = TB_PATH_ALL;
+	path->ingress_shared_buffer = TB_PATH_NONE;
+	path->priority = TB_USB3_PRIORITY;
+	path->weight = TB_USB3_WEIGHT;
+	path->drop_packages = 0;
+
+	tb_path_for_each_hop(path, hop)
+		tb_usb3_init_credits(hop);
+}
+
+/**
+ * tb_tunnel_discover_usb3() - Discover existing USB3 tunnels
+ * @tb: Pointer to the domain structure
+ * @down: USB3 downstream adapter
+ * @alloc_hopid: Allocate HopIDs from visited ports
+ *
+ * If @down adapter is active, follows the tunnel to the USB3 upstream
+ * adapter and back.
+ *
+ * Return: Pointer to &struct tb_tunnel or %NULL if there was no tunnel.
+ */
+struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down,
+					  bool alloc_hopid)
+{
+	struct tb_tunnel *tunnel;
+	struct tb_path *path;
+
+	if (!tb_usb3_port_is_enabled(down))
+		return NULL;
+
+	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->activate = tb_usb3_activate;
+	tunnel->src_port = down;
+
+	/*
+	 * Discover both paths even if they are not complete. We will
+	 * clean them up by calling tb_tunnel_deactivate() below in that
+	 * case.
+	 */
+	path = tb_path_discover(down, TB_USB3_HOPID, NULL, -1,
+				&tunnel->dst_port, "USB3 Down", alloc_hopid);
+	if (!path) {
+		/* Just disable the downstream port */
+		tb_usb3_port_enable(down, false);
+		goto err_free;
+	}
+	tunnel->paths[TB_USB3_PATH_DOWN] = path;
+	tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]);
+
+	path = tb_path_discover(tunnel->dst_port, -1, down, TB_USB3_HOPID, NULL,
+				"USB3 Up", alloc_hopid);
+	if (!path)
+		goto err_deactivate;
+	tunnel->paths[TB_USB3_PATH_UP] = path;
+	tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]);
+
+	/* Validate that the tunnel is complete */
+	if (!tb_port_is_usb3_up(tunnel->dst_port)) {
+		tb_port_warn(tunnel->dst_port,
+			     "path does not end on an USB3 adapter, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	if (down != tunnel->src_port) {
+		tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	if (!tb_usb3_port_is_enabled(tunnel->dst_port)) {
+		tb_tunnel_warn(tunnel,
+			       "tunnel is not fully activated, cleaning up\n");
+		goto err_deactivate;
+	}
+
+	if (!tb_route(down->sw)) {
+		int ret;
+
+		/*
+		 * Read the initial bandwidth allocation for the first
+		 * hop tunnel.
+		 */
+		ret = usb4_usb3_port_allocated_bandwidth(down,
+			&tunnel->allocated_up, &tunnel->allocated_down);
+		if (ret)
+			goto err_deactivate;
+
+		tb_tunnel_dbg(tunnel, "currently allocated bandwidth %d/%d Mb/s\n",
+			      tunnel->allocated_up, tunnel->allocated_down);
+
+		tunnel->pre_activate = tb_usb3_pre_activate;
+		tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth;
+		tunnel->release_unused_bandwidth =
+			tb_usb3_release_unused_bandwidth;
+		tunnel->reclaim_available_bandwidth =
+			tb_usb3_reclaim_available_bandwidth;
+	}
+
+	tb_tunnel_dbg(tunnel, "discovered\n");
+	return tunnel;
+
+err_deactivate:
+	tb_tunnel_deactivate(tunnel);
+err_free:
+	tb_tunnel_put(tunnel);
+
+	return NULL;
+}
+
+/**
+ * tb_tunnel_alloc_usb3() - allocate a USB3 tunnel
+ * @tb: Pointer to the domain structure
+ * @up: USB3 upstream adapter port
+ * @down: USB3 downstream adapter port
+ * @max_up: Maximum available upstream bandwidth for the USB3 tunnel.
+ *	    %0 if no available bandwidth.
+ * @max_down: Maximum available downstream bandwidth for the USB3 tunnel.
+ *	      %0 if no available bandwidth.
+ *
+ * Allocate an USB3 tunnel. The ports must be of type @TB_TYPE_USB3_UP and
+ * @TB_TYPE_USB3_DOWN.
+ *
+ * Return: Pointer to @struct tb_tunnel or %NULL in case of failure.
+ */
+struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up,
+				       struct tb_port *down, int max_up,
+				       int max_down)
+{
+	struct tb_tunnel *tunnel;
+	struct tb_path *path;
+	int max_rate = 0;
+
+	if (!tb_route(down->sw) && (max_up > 0 || max_down > 0)) {
+		/*
+		 * For USB3 isochronous transfers, we allow bandwidth which is
+		 * not higher than 90% of maximum supported bandwidth by USB3
+		 * adapters.
+		 */
+		max_rate = tb_usb3_max_link_rate(down, up);
+		if (max_rate < 0)
+			return NULL;
+
+		max_rate = max_rate * 90 / 100;
+		tb_port_dbg(up, "maximum required bandwidth for USB3 tunnel %d Mb/s\n",
+			    max_rate);
+	}
+
+	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3);
+	if (!tunnel)
+		return NULL;
+
+	tunnel->activate = tb_usb3_activate;
+	tunnel->src_port = down;
+	tunnel->dst_port = up;
+	tunnel->max_up = max_up;
+	tunnel->max_down = max_down;
+
+	path = tb_path_alloc(tb, down, TB_USB3_HOPID, up, TB_USB3_HOPID, 0,
+			     "USB3 Down");
+	if (!path)
+		goto err_free;
+	tb_usb3_init_path(path);
+	tunnel->paths[TB_USB3_PATH_DOWN] = path;
+
+	path = tb_path_alloc(tb, up, TB_USB3_HOPID, down, TB_USB3_HOPID, 0,
+			     "USB3 Up");
+	if (!path)
+		goto err_free;
+	tb_usb3_init_path(path);
+	tunnel->paths[TB_USB3_PATH_UP] = path;
+
+	if (!tb_route(down->sw)) {
+		tunnel->allocated_up = min(max_rate, max_up);
+		tunnel->allocated_down = min(max_rate, max_down);
+
+		tunnel->pre_activate = tb_usb3_pre_activate;
+		tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth;
+		tunnel->release_unused_bandwidth =
+			tb_usb3_release_unused_bandwidth;
+		tunnel->reclaim_available_bandwidth =
+			tb_usb3_reclaim_available_bandwidth;
+	}
+
+	return tunnel;
+
+err_free:
+	tb_tunnel_put(tunnel);
+	return NULL;
+}
+
+/**
+ * tb_tunnel_is_invalid - check whether an activated path is still valid
+ * @tunnel: Tunnel to check
+ *
+ * Return: %true if path is valid, %false otherwise.
+ */
+bool tb_tunnel_is_invalid(struct tb_tunnel *tunnel)
+{
+	int i;
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		WARN_ON(!tunnel->paths[i]->activated);
+		if (tb_path_is_invalid(tunnel->paths[i]))
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * tb_tunnel_activate() - activate a tunnel
+ * @tunnel: Tunnel to activate
+ *
+ * Return:
+ * * %0 - On success.
+ * * %-EINPROGRESS - If the tunnel activation is still in progress (that's
+ *   for DP tunnels to complete DPRX capabilities read).
+ * * Negative errno - Another error occurred.
+ */
+int tb_tunnel_activate(struct tb_tunnel *tunnel)
+{
+	int res, i;
+
+	tb_tunnel_dbg(tunnel, "activating\n");
+
+	/*
+	 * Make sure all paths are properly disabled before enabling
+	 * them again.
+	 */
+	for (i = 0; i < tunnel->npaths; i++) {
+		if (tunnel->paths[i]->activated) {
+			tb_path_deactivate(tunnel->paths[i]);
+			tunnel->paths[i]->activated = false;
+		}
+	}
+
+	tunnel->state = TB_TUNNEL_ACTIVATING;
+
+	if (tunnel->pre_activate) {
+		res = tunnel->pre_activate(tunnel);
+		if (res)
+			return res;
+	}
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		res = tb_path_activate(tunnel->paths[i]);
+		if (res)
+			goto err;
+	}
+
+	if (tunnel->activate) {
+		res = tunnel->activate(tunnel, true);
+		if (res) {
+			if (res == -EINPROGRESS)
+				return res;
+			goto err;
+		}
+	}
+
+	tb_tunnel_set_active(tunnel, true);
+	return 0;
+
+err:
+	tb_tunnel_warn(tunnel, "activation failed\n");
+	tb_tunnel_deactivate(tunnel);
+	return res;
+}
+
+/**
+ * tb_tunnel_deactivate() - deactivate a tunnel
+ * @tunnel: Tunnel to deactivate
+ */
+void tb_tunnel_deactivate(struct tb_tunnel *tunnel)
+{
+	int i;
+
+	tb_tunnel_dbg(tunnel, "deactivating\n");
+
+	if (tunnel->activate)
+		tunnel->activate(tunnel, false);
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		if (tunnel->paths[i] && tunnel->paths[i]->activated)
+			tb_path_deactivate(tunnel->paths[i]);
+	}
+
+	if (tunnel->post_deactivate)
+		tunnel->post_deactivate(tunnel);
+
+	tb_tunnel_set_active(tunnel, false);
+}
+
+/**
+ * tb_tunnel_port_on_path() - Does the tunnel go through port
+ * @tunnel: Tunnel to check
+ * @port: Port to check
+ *
+ * Return: %true if @tunnel goes through @port (direction does not matter),
+ * %false otherwise.
+ */
+bool tb_tunnel_port_on_path(const struct tb_tunnel *tunnel,
+			    const struct tb_port *port)
+{
+	int i;
+
+	for (i = 0; i < tunnel->npaths; i++) {
+		if (!tunnel->paths[i])
+			continue;
+
+		if (tb_path_port_on_path(tunnel->paths[i], port))
+			return true;
+	}
+
+	return false;
+}
+
+// Is tb_tunnel_activate() called for the tunnel
+static bool tb_tunnel_is_activated(const struct tb_tunnel *tunnel)
+{
+	return tunnel->state == TB_TUNNEL_ACTIVATING || tb_tunnel_is_active(tunnel);
+}
+
+/**
+ * tb_tunnel_maximum_bandwidth() - Return maximum possible bandwidth
+ * @tunnel: Tunnel to check
+ * @max_up: Maximum upstream bandwidth in Mb/s
+ * @max_down: Maximum downstream bandwidth in Mb/s
+ *
+ * Return:
+ * * Maximum possible bandwidth this tunnel can support if not
+ *   limited by other bandwidth clients.
+ * * %-EOPNOTSUPP - If the tunnel does not support this function.
+ * * %-ENOTCONN - If the tunnel is not active.
+ */
+int tb_tunnel_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up,
+				int *max_down)
+{
+	if (!tb_tunnel_is_active(tunnel))
+		return -ENOTCONN;
+
+	if (tunnel->maximum_bandwidth)
+		return tunnel->maximum_bandwidth(tunnel, max_up, max_down);
+	return -EOPNOTSUPP;
+}
+
+/**
+ * tb_tunnel_allocated_bandwidth() - Return bandwidth allocated for the tunnel
+ * @tunnel: Tunnel to check
+ * @allocated_up: Currently allocated upstream bandwidth in Mb/s is stored here
+ * @allocated_down: Currently allocated downstream bandwidth in Mb/s is
+ *		    stored here
+ *
+ * Return:
+ * * Bandwidth allocated for the tunnel. This may be higher than what the
+ *   tunnel actually consumes.
+ * * %-EOPNOTSUPP - If the tunnel does not support this function.
+ * * %-ENOTCONN - If the tunnel is not active.
+ * * Negative errno - Another error occurred.
+ */
+int tb_tunnel_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up,
+				  int *allocated_down)
+{
+	if (!tb_tunnel_is_active(tunnel))
+		return -ENOTCONN;
+
+	if (tunnel->allocated_bandwidth)
+		return tunnel->allocated_bandwidth(tunnel, allocated_up,
+						   allocated_down);
+	return -EOPNOTSUPP;
+}
+
+/**
+ * tb_tunnel_alloc_bandwidth() - Change tunnel bandwidth allocation
+ * @tunnel: Tunnel whose bandwidth allocation to change
+ * @alloc_up: New upstream bandwidth in Mb/s
+ * @alloc_down: New downstream bandwidth in Mb/s
+ *
+ * Tries to change tunnel bandwidth allocation.
+ *
+ * Return:
+ * * %0 - On success. Updates @alloc_up and @alloc_down to values that were
+ *   actually allocated (it may not be the same as passed originally).
+ * * Negative errno - In case of failure.
+ */
+int tb_tunnel_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up,
+			      int *alloc_down)
+{
+	if (!tb_tunnel_is_active(tunnel))
+		return -ENOTCONN;
+
+	if (tunnel->alloc_bandwidth) {
+		int ret;
+
+		ret = tunnel->alloc_bandwidth(tunnel, alloc_up, alloc_down);
+		if (ret)
+			return ret;
+
+		tb_tunnel_changed(tunnel);
+		return 0;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+/**
+ * tb_tunnel_consumed_bandwidth() - Return bandwidth consumed by the tunnel
+ * @tunnel: Tunnel to check
+ * @consumed_up: Consumed bandwidth in Mb/s from @dst_port to @src_port.
+ *		 Can be %NULL.
+ * @consumed_down: Consumed bandwidth in Mb/s from @src_port to @dst_port.
+ *		   Can be %NULL.
+ *
+ * Stores the amount of isochronous bandwidth @tunnel consumes in
+ * @consumed_up and @consumed_down.
+ *
+ * Return: %0 on success, negative errno otherwise.
+ */
+int tb_tunnel_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up,
+				 int *consumed_down)
+{
+	int up_bw = 0, down_bw = 0;
+
+	/*
+	 * Here we need to distinguish between not active tunnel from
+	 * tunnels that are either fully active or activation started.
+	 * The latter is true for DP tunnels where we must report the
+	 * consumed to be the maximum we gave it until DPRX capabilities
+	 * read is done by the graphics driver.
+	 */
+	if (tb_tunnel_is_activated(tunnel) && tunnel->consumed_bandwidth) {
+		int ret;
+
+		ret = tunnel->consumed_bandwidth(tunnel, &up_bw, &down_bw);
+		if (ret)
+			return ret;
+	}
+
+	if (consumed_up)
+		*consumed_up = up_bw;
+	if (consumed_down)
+		*consumed_down = down_bw;
+
+	tb_tunnel_dbg(tunnel, "consumed bandwidth %d/%d Mb/s\n", up_bw, down_bw);
+	return 0;
+}
+
+/**
+ * tb_tunnel_release_unused_bandwidth() - Release unused bandwidth
+ * @tunnel: Tunnel whose unused bandwidth to release
+ *
+ * If tunnel supports dynamic bandwidth management (USB3 tunnels at the
+ * moment) this function makes it release all the unused bandwidth.
+ *
+ * Return: %0 on success, negative errno otherwise.
+ */
+int tb_tunnel_release_unused_bandwidth(struct tb_tunnel *tunnel)
+{
+	if (!tb_tunnel_is_active(tunnel))
+		return -ENOTCONN;
+
+	if (tunnel->release_unused_bandwidth) {
+		int ret;
+
+		ret = tunnel->release_unused_bandwidth(tunnel);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * tb_tunnel_reclaim_available_bandwidth() - Reclaim available bandwidth
+ * @tunnel: Tunnel reclaiming available bandwidth
+ * @available_up: Available upstream bandwidth (in Mb/s)
+ * @available_down: Available downstream bandwidth (in Mb/s)
+ *
+ * Reclaims bandwidth from @available_up and @available_down and updates
+ * the variables accordingly (e.g decreases both according to what was
+ * reclaimed by the tunnel). If nothing was reclaimed the values are
+ * kept as is.
+ */
+void tb_tunnel_reclaim_available_bandwidth(struct tb_tunnel *tunnel,
+					   int *available_up,
+					   int *available_down)
+{
+	if (!tb_tunnel_is_active(tunnel))
+		return;
+
+	if (tunnel->reclaim_available_bandwidth)
+		tunnel->reclaim_available_bandwidth(tunnel, available_up,
+						    available_down);
+}
+
+const char *tb_tunnel_type_name(const struct tb_tunnel *tunnel)
+{
+	return tb_tunnel_names[tunnel->type];
+}