arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 78 insertions, 0 deletions

diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig
new file mode 100644
index 000000000..294b3227a
--- /dev/null
+++ b/drivers/thunderbolt/Kconfig
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig USB4
+	tristate "Unified support for USB4 and Thunderbolt"
+	depends on PCI
+	select APPLE_PROPERTIES if EFI_STUB && X86
+	select CRC32
+	select CRYPTO_LIB_SHA256
+	select CRYPTO_LIB_UTILS
+	select NVMEM
+	help
+	  USB4 and Thunderbolt driver. USB4 is the public specification
+	  based on the Thunderbolt 3 protocol. This driver is required if
+	  you want to hotplug Thunderbolt and USB4 compliant devices on
+	  Apple hardware or on PCs with Intel Falcon Ridge or newer.
+
+	  To compile this driver a module, choose M here. The module will be
+	  called thunderbolt.
+
+if USB4
+
+config USB4_CONFIGFS
+	def_tristate USB4
+	depends on CONFIGFS_FS && !(USB4=y && CONFIGFS_FS=m)
+
+config USB4_DEBUGFS_WRITE
+	bool "Enable write by debugfs to configuration spaces (DANGEROUS)"
+	help
+	  Enables writing to device configuration registers through
+	  debugfs interface. You can use tools such as Thunderbolt/USB4
+	  debugging tools to access these registers. For more
+	  information see:
+
+	    https://github.com/intel/tbtools
+
+	  Only enable this if you know what you are doing! Never enable
+	  this for production systems or distro kernels.
+
+config USB4_DEBUGFS_MARGINING
+	bool "Expose receiver lane margining operations under USB4 ports and retimers (DANGEROUS)"
+	depends on DEBUG_FS
+	depends on USB4_DEBUGFS_WRITE
+	help
+	  Enables hardware and software based receiver lane margining
+	  support under each USB4 port and retimer, including retimers
+	  on the other side of the cable. Used for electrical quality
+	  and robustness validation during manufacturing. Should not be
+	  enabled by distro kernels.
+
+config USB4_KUNIT_TEST
+	bool "KUnit tests" if !KUNIT_ALL_TESTS
+	depends on USB4 && KUNIT=y
+	default KUNIT_ALL_TESTS
+
+config USB4_DMA_TEST
+	tristate "DMA traffic test driver"
+	depends on DEBUG_FS
+	help
+	  This allows sending and receiving DMA traffic through loopback
+	  connection. Loopback connection can be done by either special
+	  dongle that has TX/RX lines crossed, or by simply connecting a
+	  cable back to the host. Only enable this if you know what you
+	  are doing. Normal users and distro kernels should say N here.
+
+	  To compile this driver a module, choose M here. The module will be
+	  called thunderbolt_dma_test.
+
+config USB4_STREAM
+	tristate "Stream data over Thunderbolt/USB4 cable"
+	depends on USB4_CONFIGFS
+	help
+	  This adds support for USB4STREAM protocol that allows two
+	  hosts to stream data directly over Thunderbolt/USB4 cable
+	  through /dev/tbstreamX devices.
+
+	  To compile this driver a module, choose M here. The module will be
+	  called thunderbolt_stream.
+
+endif # USB4