perf/x86/intel: Rename DMR offcore_rsp attribute to offmodule_rspgrafted

DMR introduces Offmodule Response events in place of the legacy
Offcore Response events, but it still exposes the inherited
offcore_rsp PMU attribute for programming the corresponding MSR data.

Rename the DMR PMU attribute to offmodule_rsp so the sysfs interface
matches the underlying event name and avoids user & tooling confusion.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260917015234.981153-12-dapeng1.mi@linux.intel.com

7 files changed, 2353 insertions, 0 deletions

diff --git a/drivers/thermal/renesas/Kconfig b/drivers/thermal/renesas/Kconfig
new file mode 100644
index 000000000..5735c8728
--- /dev/null
+++ b/drivers/thermal/renesas/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config RCAR_THERMAL
+	tristate "Renesas R-Car thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the R-Car thermal sensor driver into the Linux
+	  thermal framework.
+
+config RCAR_GEN3_THERMAL
+	tristate "Renesas R-Car Gen3/Gen4 and RZ/G2 thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the R-Car Gen3/Gen4 or RZ/G2 thermal sensor
+	  driver into the Linux thermal framework.
+
+config RZG2L_THERMAL
+	tristate "Renesas RZ/G2L thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the RZ/G2L thermal sensor driver into the Linux
+	  thermal framework.
+
+config RZG3E_THERMAL
+	tristate "Renesas RZ/G3E thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  Enable this to plug the RZ/G3E thermal sensor driver into the Linux
+	  thermal framework.
+
+config RZG3S_THERMAL
+	tristate "Renesas RZ/G3S thermal driver"
+	depends on ARCH_R9A08G045 || COMPILE_TEST
+	depends on OF && IIO && RZG2L_ADC
+	help
+	  Enable this to plug the RZ/G3S thermal sensor driver into the Linux
+	  thermal framework.
diff --git a/drivers/thermal/renesas/Makefile b/drivers/thermal/renesas/Makefile
new file mode 100644
index 000000000..8f5ae9af2
--- /dev/null
+++ b/drivers/thermal/renesas/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
+obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
+obj-$(CONFIG_RZG2L_THERMAL)	+= rzg2l_thermal.o
+obj-$(CONFIG_RZG3E_THERMAL)	+= rzg3e_thermal.o
+obj-$(CONFIG_RZG3S_THERMAL)	+= rzg3s_thermal.o
diff --git a/drivers/thermal/renesas/rcar_gen3_thermal.c b/drivers/thermal/renesas/rcar_gen3_thermal.c
new file mode 100644
index 000000000..94804816e
--- /dev/null
+++ b/drivers/thermal/renesas/rcar_gen3_thermal.c
@@ -0,0 +1,634 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  R-Car Gen3, Gen4 and RZ/G2 THS thermal sensor driver
+ *  Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen.
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation.
+ * Copyright (C) 2016 Sang Engineering
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/thermal.h>
+
+#include "../thermal_hwmon.h"
+
+/* Register offsets */
+#define REG_GEN3_IRQSTR		0x04
+#define REG_GEN3_IRQMSK		0x08
+#define REG_GEN3_IRQCTL		0x0c
+#define REG_GEN3_IRQEN		0x10
+#define REG_GEN3_IRQTEMP1	0x14
+#define REG_GEN3_IRQTEMP2	0x18
+#define REG_GEN3_IRQTEMP3	0x1c
+#define REG_GEN3_THCTR		0x20
+#define REG_GEN3_TEMP		0x28
+#define REG_GEN3_THCODE1	0x50
+#define REG_GEN3_THCODE2	0x54
+#define REG_GEN3_THCODE3	0x58
+#define REG_GEN3_PTAT1		0x5c
+#define REG_GEN3_PTAT2		0x60
+#define REG_GEN3_PTAT3		0x64
+#define REG_GEN3_THSCP		0x68
+#define REG_GEN4_THSFMON00	0x180
+#define REG_GEN4_THSFMON01	0x184
+#define REG_GEN4_THSFMON02	0x188
+#define REG_GEN4_THSFMON15	0x1bc
+#define REG_GEN4_THSFMON16	0x1c0
+#define REG_GEN4_THSFMON17	0x1c4
+
+/* IRQ{STR,MSK,EN} bits */
+#define IRQ_TEMP1		BIT(0)
+#define IRQ_TEMP2		BIT(1)
+#define IRQ_TEMP3		BIT(2)
+#define IRQ_TEMPD1		BIT(3)
+#define IRQ_TEMPD2		BIT(4)
+#define IRQ_TEMPD3		BIT(5)
+
+/* THCTR bits */
+#define THCTR_PONM	BIT(6)
+#define THCTR_THSST	BIT(0)
+
+/* THSCP bits */
+#define THSCP_COR_PARA_VLD	(BIT(15) | BIT(14))
+
+#define CTEMP_MASK	0xfff
+
+#define MCELSIUS(temp)	((temp) * 1000)
+#define GEN3_FUSE_MASK	0xfff
+#define GEN4_FUSE_MASK	0xfff
+
+#define TSC_MAX_NUM	5
+
+struct rcar_gen3_thermal_priv;
+
+struct rcar_gen3_thermal_fuse_info {
+	u32 ptat[3];
+	u32 thcode[3];
+	u32 mask;
+};
+
+struct rcar_gen3_thermal_fuse_default {
+	u32 ptat[3];
+	u32 thcodes[TSC_MAX_NUM][3];
+};
+
+struct rcar_thermal_info {
+	int scale;
+	int adj_below;
+	int adj_above;
+	const struct rcar_gen3_thermal_fuse_info *fuses;
+	const struct rcar_gen3_thermal_fuse_default *fuse_defaults;
+};
+
+struct equation_set_coef {
+	int a;
+	int b;
+};
+
+struct rcar_gen3_thermal_tsc {
+	struct rcar_gen3_thermal_priv *priv;
+	void __iomem *base;
+	struct thermal_zone_device *zone;
+	/* Different coefficients are used depending on a threshold. */
+	struct {
+		struct equation_set_coef below;
+		struct equation_set_coef above;
+	} coef;
+	int thcode[3];
+};
+
+struct rcar_gen3_thermal_priv {
+	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
+	struct thermal_zone_device_ops ops;
+	unsigned int num_tscs;
+	int ptat[3];
+	int tj_t;
+	const struct rcar_thermal_info *info;
+};
+
+static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc,
+					 u32 reg)
+{
+	return ioread32(tsc->base + reg);
+}
+
+static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
+					   u32 reg, u32 data)
+{
+	iowrite32(data, tsc->base + reg);
+}
+
+/*
+ * Linear approximation for temperature
+ *
+ * [temp] = ((thadj - [reg]) * a) / b + adj
+ * [reg] = thadj - ([temp] - adj) * b / a
+ *
+ * The constants a and b are calculated using two triplets of int values PTAT
+ * and THCODE. PTAT and THCODE can either be read from hardware or use hard
+ * coded values from the driver. The formula to calculate a and b are taken from
+ * the datasheet. Different calculations are needed for a and b depending on
+ * if the input variables ([temp] or [reg]) are above or below a threshold. The
+ * threshold is also calculated from PTAT and THCODE using formulas from the
+ * datasheet.
+ *
+ * The constant thadj is one of the THCODE values, which one to use depends on
+ * the threshold and input value.
+ *
+ * The constants adj is taken verbatim from the datasheet. Two values exists,
+ * which one to use depends on the input value and the calculated threshold.
+ * Furthermore different SoC models supported by the driver have different sets
+ * of values. The values for each model are stored in the device match data.
+ */
+
+static void rcar_gen3_thermal_shared_coefs(struct rcar_gen3_thermal_priv *priv)
+{
+	priv->tj_t =
+		DIV_ROUND_CLOSEST((priv->ptat[1] - priv->ptat[2]) * priv->info->scale,
+				  priv->ptat[0] - priv->ptat[2])
+		+ priv->info->adj_below;
+}
+static void rcar_gen3_thermal_tsc_coefs(struct rcar_gen3_thermal_priv *priv,
+					struct rcar_gen3_thermal_tsc *tsc)
+{
+	tsc->coef.below.a = priv->info->scale * (priv->ptat[2] - priv->ptat[1]);
+	tsc->coef.above.a = priv->info->scale * (priv->ptat[0] - priv->ptat[1]);
+
+	tsc->coef.below.b = (priv->ptat[2] - priv->ptat[0]) * (tsc->thcode[2] - tsc->thcode[1]);
+	tsc->coef.above.b = (priv->ptat[0] - priv->ptat[2]) * (tsc->thcode[1] - tsc->thcode[0]);
+}
+
+static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz);
+	struct rcar_gen3_thermal_priv *priv = tsc->priv;
+	const struct equation_set_coef *coef;
+	int adj, decicelsius, reg, thcode;
+
+	/* Read register and convert to millidegree Celsius */
+	reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
+
+	if (reg < tsc->thcode[1]) {
+		adj = priv->info->adj_below;
+		coef = &tsc->coef.below;
+		thcode = tsc->thcode[2];
+	} else {
+		adj = priv->info->adj_above;
+		coef = &tsc->coef.above;
+		thcode = tsc->thcode[0];
+	}
+
+	/*
+	 * The dividend can't be grown as it might overflow, instead shorten the
+	 * divisor to convert to decidegree Celsius. If we convert after the
+	 * division precision is lost as we will scale up from whole degrees
+	 * Celsius.
+	 */
+	decicelsius = DIV_ROUND_CLOSEST(coef->a * (thcode - reg), coef->b / 10);
+
+	/* Guaranteed operating range is -40C to 125C. */
+
+	/* Reporting is done in millidegree Celsius */
+	*temp = decicelsius * 100 + adj * 1000;
+
+	return 0;
+}
+
+static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
+					      int mcelsius)
+{
+	struct rcar_gen3_thermal_priv *priv = tsc->priv;
+	const struct equation_set_coef *coef;
+	int adj, celsius, thcode;
+
+	celsius = DIV_ROUND_CLOSEST(mcelsius, 1000);
+	if (celsius < priv->tj_t) {
+		coef = &tsc->coef.below;
+		adj = priv->info->adj_below;
+		thcode = tsc->thcode[2];
+	} else {
+		coef = &tsc->coef.above;
+		adj = priv->info->adj_above;
+		thcode = tsc->thcode[0];
+	}
+
+	return thcode - DIV_ROUND_CLOSEST((celsius - adj) * coef->b, coef->a);
+}
+
+static int rcar_gen3_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz);
+	u32 irqmsk = 0;
+
+	if (low != -INT_MAX) {
+		irqmsk |= IRQ_TEMPD1;
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
+					rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
+	}
+
+	if (high != INT_MAX) {
+		irqmsk |= IRQ_TEMP2;
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2,
+					rcar_gen3_thermal_mcelsius_to_temp(tsc, high));
+	}
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, irqmsk);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops rcar_gen3_tz_of_ops = {
+	.get_temp	= rcar_gen3_thermal_get_temp,
+	.set_trips	= rcar_gen3_thermal_set_trips,
+};
+
+static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
+{
+	struct rcar_gen3_thermal_priv *priv = data;
+	unsigned int i;
+	u32 status;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
+		rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
+		if (status && priv->tscs[i]->zone)
+			thermal_zone_device_update(priv->tscs[i]->zone,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void rcar_gen3_thermal_fetch_fuses(struct rcar_gen3_thermal_priv *priv)
+{
+	const struct rcar_gen3_thermal_fuse_info *fuses = priv->info->fuses;
+
+	/*
+	 * Set the pseudo calibration points with fused values.
+	 * PTAT is shared between all TSCs but only fused for the first
+	 * TSC while THCODEs are fused for each TSC.
+	 */
+	priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], fuses->ptat[0])
+		& fuses->mask;
+	priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], fuses->ptat[1])
+		& fuses->mask;
+	priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], fuses->ptat[2])
+		& fuses->mask;
+
+	for (unsigned int i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		tsc->thcode[0] = rcar_gen3_thermal_read(tsc, fuses->thcode[0])
+			& fuses->mask;
+		tsc->thcode[1] = rcar_gen3_thermal_read(tsc, fuses->thcode[1])
+			& fuses->mask;
+		tsc->thcode[2] = rcar_gen3_thermal_read(tsc, fuses->thcode[2])
+			& fuses->mask;
+	}
+}
+
+static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
+{
+	const struct rcar_gen3_thermal_fuse_default *fuse_defaults = priv->info->fuse_defaults;
+	unsigned int i;
+	u32 thscp;
+
+	/* If fuses are not set, fallback to pseudo values. */
+	thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP);
+	if (!priv->info->fuses ||
+	    (thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
+		/* Default THCODE values in case FUSEs are not set. */
+		priv->ptat[0] = fuse_defaults->ptat[0];
+		priv->ptat[1] = fuse_defaults->ptat[1];
+		priv->ptat[2] = fuse_defaults->ptat[2];
+
+		for (i = 0; i < priv->num_tscs; i++) {
+			struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+			tsc->thcode[0] = fuse_defaults->thcodes[i][0];
+			tsc->thcode[1] = fuse_defaults->thcodes[i][1];
+			tsc->thcode[2] = fuse_defaults->thcodes[i][2];
+		}
+
+		return false;
+	}
+
+	rcar_gen3_thermal_fetch_fuses(priv);
+
+	return true;
+}
+
+static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv,
+				   struct rcar_gen3_thermal_tsc *tsc)
+{
+	u32 reg_val;
+
+	reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
+	reg_val &= ~THCTR_PONM;
+	rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
+
+	usleep_range(1000, 2000);
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0);
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+	if (priv->ops.set_trips)
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
+					IRQ_TEMPD1 | IRQ_TEMP2);
+
+	reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
+	reg_val |= THCTR_THSST;
+	rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
+
+	usleep_range(1000, 2000);
+}
+
+static const struct rcar_gen3_thermal_fuse_info rcar_gen3_thermal_fuse_info_gen3 = {
+	.ptat = { REG_GEN3_PTAT1, REG_GEN3_PTAT2, REG_GEN3_PTAT3 },
+	.thcode = { REG_GEN3_THCODE1, REG_GEN3_THCODE2, REG_GEN3_THCODE3 },
+	.mask = GEN3_FUSE_MASK,
+};
+
+static const struct rcar_gen3_thermal_fuse_info rcar_gen3_thermal_fuse_info_gen4 = {
+	.ptat = { REG_GEN4_THSFMON16, REG_GEN4_THSFMON17, REG_GEN4_THSFMON15 },
+	.thcode = { REG_GEN4_THSFMON01, REG_GEN4_THSFMON02, REG_GEN4_THSFMON00 },
+	.mask = GEN4_FUSE_MASK,
+};
+
+static const struct rcar_gen3_thermal_fuse_default rcar_gen3_thermal_fuse_default_info_gen3 = {
+	.ptat = { 2631, 1509, 435 },
+	.thcodes = {
+		{ 3397, 2800, 2221 },
+		{ 3393, 2795, 2216 },
+		{ 3389, 2805, 2237 },
+		{ 3415, 2694, 2195 },
+		{ 3356, 2724, 2244 },
+	},
+};
+
+static const struct rcar_gen3_thermal_fuse_default rcar_gen3_thermal_fuse_default_info_gen4 = {
+	.ptat = { 3274, 2164, 985 },
+	.thcodes = { /* All four THS units share the same trimming */
+		{ 3218, 2617, 1980 },
+		{ 3218, 2617, 1980 },
+		{ 3218, 2617, 1980 },
+		{ 3218, 2617, 1980 },
+	}
+};
+
+static const struct rcar_thermal_info rcar_m3w_thermal_info = {
+	.scale = 157,
+	.adj_below = -41,
+	.adj_above = 116,
+	.fuses = &rcar_gen3_thermal_fuse_info_gen3,
+	.fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
+};
+
+static const struct rcar_thermal_info rcar_gen3_thermal_info = {
+	.scale = 167,
+	.adj_below = -41,
+	.adj_above = 126,
+	.fuses = &rcar_gen3_thermal_fuse_info_gen3,
+	.fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
+};
+
+static const struct rcar_thermal_info rcar_s4_thermal_info = {
+	.scale = 167,
+	.adj_below = -41,
+	.adj_above = 126,
+	.fuses = &rcar_gen3_thermal_fuse_info_gen4,
+	.fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
+};
+
+static const struct rcar_thermal_info rcar_gen4_thermal_info = {
+	.scale = 167,
+	.adj_below = -41,
+	.adj_above = 126,
+	.fuses = &rcar_gen3_thermal_fuse_info_gen4,
+	.fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen4,
+};
+
+static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
+	{
+		.compatible = "renesas,r8a774a1-thermal",
+		.data = &rcar_m3w_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a774b1-thermal",
+		.data = &rcar_gen3_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a774e1-thermal",
+		.data = &rcar_gen3_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a7795-thermal",
+		.data = &rcar_gen3_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a7796-thermal",
+		.data = &rcar_m3w_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a77961-thermal",
+		.data = &rcar_m3w_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a77965-thermal",
+		.data = &rcar_gen3_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a77980-thermal",
+		.data = &rcar_gen3_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a779a0-thermal",
+		.data = &rcar_gen3_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a779f0-thermal",
+		.data = &rcar_s4_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a779g0-thermal",
+		.data = &rcar_gen4_thermal_info,
+	},
+	{
+		.compatible = "renesas,r8a779h0-thermal",
+		.data = &rcar_gen4_thermal_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
+
+static void rcar_gen3_thermal_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+}
+
+static void rcar_gen3_hwmon_action(void *data)
+{
+	struct thermal_zone_device *zone = data;
+
+	thermal_remove_hwmon_sysfs(zone);
+}
+
+static int rcar_gen3_thermal_request_irqs(struct rcar_gen3_thermal_priv *priv,
+					  struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int i;
+	char *irqname;
+	int ret, irq;
+
+	for (i = 0; i < 2; i++) {
+		irq = platform_get_irq_optional(pdev, i);
+		if (irq < 0)
+			return irq;
+
+		irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d",
+					 dev_name(dev), i);
+		if (!irqname)
+			return -ENOMEM;
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+						rcar_gen3_thermal_irq,
+						IRQF_ONESHOT, irqname, priv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rcar_gen3_thermal_probe(struct platform_device *pdev)
+{
+	struct rcar_gen3_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct thermal_zone_device *zone;
+	unsigned int i;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->ops = rcar_gen3_tz_of_ops;
+
+	priv->info = of_device_get_match_data(dev);
+	platform_set_drvdata(pdev, priv);
+
+	if (rcar_gen3_thermal_request_irqs(priv, pdev))
+		priv->ops.set_trips = NULL;
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	for (i = 0; i < TSC_MAX_NUM; i++) {
+		struct rcar_gen3_thermal_tsc *tsc;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+
+		tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL);
+		if (!tsc) {
+			ret = -ENOMEM;
+			goto error_unregister;
+		}
+
+		tsc->priv = priv;
+		tsc->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(tsc->base)) {
+			ret = PTR_ERR(tsc->base);
+			goto error_unregister;
+		}
+
+		priv->tscs[i] = tsc;
+	}
+
+	priv->num_tscs = i;
+
+	if (!rcar_gen3_thermal_read_fuses(priv))
+		dev_info(dev, "No calibration values fused, fallback to driver values\n");
+
+	rcar_gen3_thermal_shared_coefs(priv);
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		rcar_gen3_thermal_init(priv, tsc);
+		rcar_gen3_thermal_tsc_coefs(priv, tsc);
+
+		zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops);
+		if (IS_ERR(zone)) {
+			dev_err(dev, "Sensor %u: Can't register thermal zone\n", i);
+			ret = PTR_ERR(zone);
+			goto error_unregister;
+		}
+		tsc->zone = zone;
+
+		ret = thermal_add_hwmon_sysfs(tsc->zone);
+		if (ret)
+			goto error_unregister;
+
+		ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone);
+		if (ret)
+			goto error_unregister;
+
+		dev_info(dev, "Sensor %u: Loaded\n", i);
+	}
+
+	if (!priv->num_tscs) {
+		ret = -ENODEV;
+		goto error_unregister;
+	}
+
+	return 0;
+
+error_unregister:
+	rcar_gen3_thermal_remove(pdev);
+
+	return ret;
+}
+
+static int rcar_gen3_thermal_resume(struct device *dev)
+{
+	struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		rcar_gen3_thermal_init(priv, tsc);
+	}
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, NULL,
+				rcar_gen3_thermal_resume);
+
+static struct platform_driver rcar_gen3_thermal_driver = {
+	.driver	= {
+		.name	= "rcar_gen3_thermal",
+		.pm = pm_sleep_ptr(&rcar_gen3_thermal_pm_ops),
+		.of_match_table = rcar_gen3_thermal_dt_ids,
+	},
+	.probe		= rcar_gen3_thermal_probe,
+	.remove		= rcar_gen3_thermal_remove,
+};
+module_platform_driver(rcar_gen3_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver");
+MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>");
diff --git a/drivers/thermal/renesas/rcar_thermal.c b/drivers/thermal/renesas/rcar_thermal.c
new file mode 100644
index 000000000..9a9038671
--- /dev/null
+++ b/drivers/thermal/renesas/rcar_thermal.c
@@ -0,0 +1,579 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  R-Car THS/TSC thermal sensor driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/thermal.h>
+
+#include "../thermal_hwmon.h"
+
+#define IDLE_INTERVAL	5000
+
+#define COMMON_STR	0x00
+#define COMMON_ENR	0x04
+#define COMMON_INTMSK	0x0c
+
+#define REG_POSNEG	0x20
+#define REG_FILONOFF	0x28
+#define REG_THSCR	0x2c
+#define REG_THSSR	0x30
+#define REG_INTCTRL	0x34
+
+/* THSCR */
+#define CPCTL	(1 << 12)
+
+/* THSSR */
+#define CTEMP	0x3f
+
+struct rcar_thermal_common {
+	void __iomem *base;
+	struct device *dev;
+	struct list_head head;
+	spinlock_t lock;
+};
+
+struct rcar_thermal_chip {
+	unsigned int use_of_thermal : 1;
+	unsigned int has_filonoff : 1;
+	unsigned int irq_per_ch : 1;
+	unsigned int needs_suspend_resume : 1;
+	unsigned int nirqs;
+	unsigned int ctemp_bands;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+	.use_of_thermal = 0,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+	.ctemp_bands = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+	.ctemp_bands = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 0,
+	.irq_per_ch = 1,
+	.needs_suspend_resume = 1,
+	/*
+	 * The Gen3 chip has 3 interrupts, but this driver uses only 2
+	 * interrupts to detect a temperature change, rise or fall.
+	 */
+	.nirqs = 2,
+	.ctemp_bands = 2,
+};
+
+struct rcar_thermal_priv {
+	void __iomem *base;
+	struct rcar_thermal_common *common;
+	struct thermal_zone_device *zone;
+	const struct rcar_thermal_chip *chip;
+	struct delayed_work work;
+	struct mutex lock;
+	struct list_head list;
+	int id;
+};
+
+#define rcar_thermal_for_each_priv(pos, common)	\
+	list_for_each_entry(pos, &common->head, list)
+
+#define MCELSIUS(temp)			((temp) * 1000)
+#define rcar_priv_to_dev(priv)		((priv)->common->dev)
+#define rcar_has_irq_support(priv)	((priv)->common->base)
+#define rcar_id_to_shift(priv)		((priv)->id * 8)
+
+static const struct of_device_id rcar_thermal_dt_ids[] = {
+	{
+		.compatible = "renesas,rcar-thermal",
+		.data = &rcar_thermal,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-thermal",
+		 .data = &rcar_gen2_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a774c0",
+		.data = &rcar_gen3_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77970",
+		.data = &rcar_gen3_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77990",
+		.data = &rcar_gen3_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77995",
+		.data = &rcar_gen3_thermal,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
+
+/*
+ *		basic functions
+ */
+#define rcar_thermal_common_read(c, r) \
+	_rcar_thermal_common_read(c, COMMON_ ##r)
+static u32 _rcar_thermal_common_read(struct rcar_thermal_common *common,
+				     u32 reg)
+{
+	return ioread32(common->base + reg);
+}
+
+#define rcar_thermal_common_write(c, r, d) \
+	_rcar_thermal_common_write(c, COMMON_ ##r, d)
+static void _rcar_thermal_common_write(struct rcar_thermal_common *common,
+				       u32 reg, u32 data)
+{
+	iowrite32(data, common->base + reg);
+}
+
+#define rcar_thermal_common_bset(c, r, m, d) \
+	_rcar_thermal_common_bset(c, COMMON_ ##r, m, d)
+static void _rcar_thermal_common_bset(struct rcar_thermal_common *common,
+				      u32 reg, u32 mask, u32 data)
+{
+	u32 val;
+
+	val = ioread32(common->base + reg);
+	val &= ~mask;
+	val |= (data & mask);
+	iowrite32(val, common->base + reg);
+}
+
+#define rcar_thermal_read(p, r) _rcar_thermal_read(p, REG_ ##r)
+static u32 _rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
+#define rcar_thermal_write(p, r, d) _rcar_thermal_write(p, REG_ ##r, d)
+static void _rcar_thermal_write(struct rcar_thermal_priv *priv,
+				u32 reg, u32 data)
+{
+	iowrite32(data, priv->base + reg);
+}
+
+#define rcar_thermal_bset(p, r, m, d) _rcar_thermal_bset(p, REG_ ##r, m, d)
+static void _rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg,
+			       u32 mask, u32 data)
+{
+	u32 val;
+
+	val = ioread32(priv->base + reg);
+	val &= ~mask;
+	val |= (data & mask);
+	iowrite32(val, priv->base + reg);
+}
+
+/*
+ *		zone device functions
+ */
+static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
+{
+	struct device *dev = rcar_priv_to_dev(priv);
+	int old, new, ctemp = -EINVAL;
+	unsigned int i;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * TSC decides a value of CPTAP automatically,
+	 * and this is the conditions which validate interrupt.
+	 */
+	rcar_thermal_bset(priv, THSCR, CPCTL, CPCTL);
+
+	old = ~0;
+	for (i = 0; i < 128; i++) {
+		/*
+		 * we need to wait 300us after changing comparator offset
+		 * to get stable temperature.
+		 * see "Usage Notes" on datasheet
+		 */
+		usleep_range(300, 400);
+
+		new = rcar_thermal_read(priv, THSSR) & CTEMP;
+		if (new == old) {
+			ctemp = new;
+			break;
+		}
+		old = new;
+	}
+
+	if (ctemp < 0) {
+		dev_err(dev, "thermal sensor was broken\n");
+		goto err_out_unlock;
+	}
+
+	/*
+	 * enable IRQ
+	 */
+	if (rcar_has_irq_support(priv)) {
+		if (priv->chip->has_filonoff)
+			rcar_thermal_write(priv, FILONOFF, 0);
+
+		/* enable Rising/Falling edge interrupt */
+		rcar_thermal_write(priv, POSNEG,  0x1);
+		rcar_thermal_write(priv, INTCTRL, (((ctemp - 0) << 8) |
+						   ((ctemp - 1) << 0)));
+	}
+
+err_out_unlock:
+	mutex_unlock(&priv->lock);
+
+	return ctemp;
+}
+
+static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
+					 int *temp)
+{
+	int ctemp;
+
+	ctemp = rcar_thermal_update_temp(priv);
+	if (ctemp < 0)
+		return ctemp;
+
+	/* Guaranteed operating range is -45C to 125C. */
+
+	if (priv->chip->ctemp_bands == 1)
+		*temp = MCELSIUS((ctemp * 5) - 65);
+	else if (ctemp < 24)
+		*temp = MCELSIUS(((ctemp * 55) - 720) / 10);
+	else
+		*temp = MCELSIUS((ctemp * 5) - 60);
+
+	return 0;
+}
+
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+{
+	struct rcar_thermal_priv *priv = thermal_zone_device_priv(zone);
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
+static const struct thermal_zone_device_ops rcar_thermal_zone_ops = {
+	.get_temp	= rcar_thermal_get_temp,
+};
+
+static struct thermal_trip trips[] = {
+	{ .type = THERMAL_TRIP_CRITICAL, .temperature = 90000 }
+};
+
+/*
+ *		interrupt
+ */
+#define rcar_thermal_irq_enable(p)	_rcar_thermal_irq_ctrl(p, 1)
+#define rcar_thermal_irq_disable(p)	_rcar_thermal_irq_ctrl(p, 0)
+static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
+{
+	struct rcar_thermal_common *common = priv->common;
+	unsigned long flags;
+	u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
+
+	if (!rcar_has_irq_support(priv))
+		return;
+
+	spin_lock_irqsave(&common->lock, flags);
+
+	rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
+
+	spin_unlock_irqrestore(&common->lock, flags);
+}
+
+static void rcar_thermal_work(struct work_struct *work)
+{
+	struct rcar_thermal_priv *priv;
+	int ret;
+
+	priv = container_of(work, struct rcar_thermal_priv, work.work);
+
+	ret = rcar_thermal_update_temp(priv);
+	if (ret < 0)
+		return;
+
+	rcar_thermal_irq_enable(priv);
+
+	thermal_zone_device_update(priv->zone, THERMAL_EVENT_UNSPECIFIED);
+}
+
+static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status)
+{
+	struct device *dev = rcar_priv_to_dev(priv);
+
+	status = (status >> rcar_id_to_shift(priv)) & 0x3;
+
+	if (status) {
+		dev_dbg(dev, "thermal%d %s%s\n",
+			priv->id,
+			(status & 0x2) ? "Rising " : "",
+			(status & 0x1) ? "Falling" : "");
+	}
+
+	return status;
+}
+
+static irqreturn_t rcar_thermal_irq(int irq, void *data)
+{
+	struct rcar_thermal_common *common = data;
+	struct rcar_thermal_priv *priv;
+	u32 status, mask;
+
+	spin_lock(&common->lock);
+
+	mask	= rcar_thermal_common_read(common, INTMSK);
+	status	= rcar_thermal_common_read(common, STR);
+	rcar_thermal_common_write(common, STR, 0x000F0F0F & mask);
+
+	spin_unlock(&common->lock);
+
+	status = status & ~mask;
+
+	/*
+	 * check the status
+	 */
+	rcar_thermal_for_each_priv(priv, common) {
+		if (rcar_thermal_had_changed(priv, status)) {
+			rcar_thermal_irq_disable(priv);
+			queue_delayed_work(system_freezable_wq, &priv->work,
+					   msecs_to_jiffies(300));
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *		platform functions
+ */
+static void rcar_thermal_remove(struct platform_device *pdev)
+{
+	struct rcar_thermal_common *common = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct rcar_thermal_priv *priv;
+
+	rcar_thermal_for_each_priv(priv, common) {
+		rcar_thermal_irq_disable(priv);
+		cancel_delayed_work_sync(&priv->work);
+		if (priv->chip->use_of_thermal)
+			thermal_remove_hwmon_sysfs(priv->zone);
+		else
+			thermal_zone_device_unregister(priv->zone);
+	}
+
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+}
+
+static int rcar_thermal_probe(struct platform_device *pdev)
+{
+	struct rcar_thermal_common *common;
+	struct rcar_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
+	int mres = 0;
+	int i;
+	int ret = -ENODEV;
+	int idle = IDLE_INTERVAL;
+	u32 enr_bits = 0;
+
+	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
+	if (!common)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, common);
+
+	INIT_LIST_HEAD(&common->head);
+	spin_lock_init(&common->lock);
+	common->dev = dev;
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	for (i = 0; i < chip->nirqs; i++) {
+		int irq;
+
+		ret = platform_get_irq_optional(pdev, i);
+		if (ret < 0 && ret != -ENXIO)
+			goto error_unregister;
+		if (ret > 0)
+			irq = ret;
+		else
+			break;
+
+		if (!common->base) {
+			/*
+			 * platform has IRQ support.
+			 * Then, driver uses common registers
+			 * rcar_has_irq_support() will be enabled
+			 */
+			res = platform_get_resource(pdev, IORESOURCE_MEM,
+						    mres++);
+			common->base = devm_ioremap_resource(dev, res);
+			if (IS_ERR(common->base)) {
+				ret = PTR_ERR(common->base);
+				goto error_unregister;
+			}
+
+			idle = 0; /* polling delay is not needed */
+		}
+
+		ret = devm_request_irq(dev, irq, rcar_thermal_irq,
+				       IRQF_SHARED, dev_name(dev), common);
+		if (ret)
+			goto error_unregister;
+
+		/* update ENR bits */
+		if (chip->irq_per_ch)
+			enr_bits |= 1 << i;
+	}
+
+	for (i = 0;; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
+		if (!res)
+			break;
+
+		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+		if (!priv) {
+			ret = -ENOMEM;
+			goto error_unregister;
+		}
+
+		priv->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->base)) {
+			ret = PTR_ERR(priv->base);
+			goto error_unregister;
+		}
+
+		priv->common = common;
+		priv->id = i;
+		priv->chip = chip;
+		mutex_init(&priv->lock);
+		INIT_LIST_HEAD(&priv->list);
+		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			goto error_unregister;
+
+		if (chip->use_of_thermal) {
+			priv->zone = devm_thermal_of_zone_register(
+						dev, i, priv,
+						&rcar_thermal_zone_ops);
+		} else {
+			priv->zone = thermal_zone_device_register_with_trips(
+				"rcar_thermal", trips, ARRAY_SIZE(trips), priv,
+						&rcar_thermal_zone_ops, NULL, 0,
+						idle);
+		}
+		if (IS_ERR(priv->zone)) {
+			dev_err(dev, "can't register thermal zone\n");
+			ret = PTR_ERR(priv->zone);
+			priv->zone = NULL;
+			goto error_unregister;
+		}
+
+		if (chip->use_of_thermal)
+			ret = thermal_add_hwmon_sysfs(priv->zone);
+		else
+			ret = thermal_zone_device_enable(priv->zone);
+		if (ret)
+			goto error_unregister;
+
+		rcar_thermal_irq_enable(priv);
+
+		list_move_tail(&priv->list, &common->head);
+
+		/* update ENR bits */
+		if (!chip->irq_per_ch)
+			enr_bits |= 3 << (i * 8);
+	}
+
+	if (common->base && enr_bits)
+		rcar_thermal_common_write(common, ENR, enr_bits);
+
+	dev_info(dev, "%d sensor probed\n", i);
+
+	return 0;
+
+error_unregister:
+	rcar_thermal_remove(pdev);
+
+	return ret;
+}
+
+static int rcar_thermal_suspend(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+
+	if (priv->chip->needs_suspend_resume) {
+		rcar_thermal_common_write(common, ENR, 0);
+		rcar_thermal_irq_disable(priv);
+		rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+	}
+
+	return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+	int ret;
+
+	if (priv->chip->needs_suspend_resume) {
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+		rcar_thermal_irq_enable(priv);
+		rcar_thermal_common_write(common, ENR, 0x03);
+	}
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+				rcar_thermal_resume);
+
+static struct platform_driver rcar_thermal_driver = {
+	.driver	= {
+		.name	= "rcar_thermal",
+		.pm = pm_sleep_ptr(&rcar_thermal_pm_ops),
+		.of_match_table = rcar_thermal_dt_ids,
+	},
+	.probe		= rcar_thermal_probe,
+	.remove		= rcar_thermal_remove,
+};
+module_platform_driver(rcar_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/thermal/renesas/rzg2l_thermal.c b/drivers/thermal/renesas/rzg2l_thermal.c
new file mode 100644
index 000000000..d9afd0619
--- /dev/null
+++ b/drivers/thermal/renesas/rzg2l_thermal.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L TSU Thermal Sensor Driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "../thermal_hwmon.h"
+
+#define CTEMP_MASK	0xFFF
+
+/* default calibration values, if FUSE values are missing */
+#define SW_CALIB0_VAL	3148
+#define SW_CALIB1_VAL	503
+
+/* Register offsets */
+#define TSU_SM		0x00
+#define TSU_ST		0x04
+#define TSU_SAD		0x0C
+#define TSU_SS		0x10
+
+#define OTPTSUTRIM_REG(n)	(0x18 + ((n) * 0x4))
+#define OTPTSUTRIM_EN_MASK	BIT(31)
+#define OTPTSUTRIM_MASK		GENMASK(11, 0)
+
+/* Sensor Mode Register(TSU_SM) */
+#define TSU_SM_EN_TS		BIT(0)
+#define TSU_SM_ADC_EN_TS	BIT(1)
+#define TSU_SM_NORMAL_MODE	(TSU_SM_EN_TS | TSU_SM_ADC_EN_TS)
+
+/* TSU_ST bits */
+#define TSU_ST_START		BIT(0)
+
+#define TSU_SS_CONV_RUNNING	BIT(0)
+
+#define TS_CODE_AVE_SCALE(x)	((x) * 1000000)
+#define MCELSIUS(temp)		((temp) * MILLIDEGREE_PER_DEGREE)
+#define TS_CODE_CAP_TIMES	8	/* Total number of ADC data samples */
+
+#define RZG2L_THERMAL_GRAN	500	/* milli Celsius */
+#define RZG2L_TSU_SS_TIMEOUT_US	1000
+
+#define CURVATURE_CORRECTION_CONST	13
+
+struct rzg2l_thermal_priv {
+	struct device *dev;
+	void __iomem *base;
+	struct thermal_zone_device *zone;
+	struct reset_control *rstc;
+	u32 calib0, calib1;
+};
+
+static inline u32 rzg2l_thermal_read(struct rzg2l_thermal_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
+static inline void rzg2l_thermal_write(struct rzg2l_thermal_priv *priv, u32 reg,
+				       u32 data)
+{
+	iowrite32(data, priv->base + reg);
+}
+
+static int rzg2l_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct rzg2l_thermal_priv *priv = thermal_zone_device_priv(tz);
+	u32 result = 0, dsensor, ts_code_ave;
+	int val, i;
+
+	for (i = 0; i < TS_CODE_CAP_TIMES ; i++) {
+		/*
+		 * TSU repeats measurement at 20 microseconds intervals and
+		 * automatically updates the results of measurement. As per
+		 * the HW manual for measuring temperature we need to read 8
+		 * values consecutively and then take the average.
+		 * ts_code_ave = (ts_code[0] + ⋯ + ts_code[7]) / 8
+		 */
+		result += rzg2l_thermal_read(priv, TSU_SAD) & CTEMP_MASK;
+		usleep_range(20, 30);
+	}
+
+	ts_code_ave = result / TS_CODE_CAP_TIMES;
+
+	/*
+	 * Calculate actual sensor value by applying curvature correction formula
+	 * dsensor = ts_code_ave / (1 + ts_code_ave * 0.000013). Here we are doing
+	 * integer calculation by scaling all the values by 1000000.
+	 */
+	dsensor = TS_CODE_AVE_SCALE(ts_code_ave) /
+		(TS_CODE_AVE_SCALE(1) + (ts_code_ave * CURVATURE_CORRECTION_CONST));
+
+	/*
+	 * The temperature Tj is calculated by the formula
+	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
+	 * where calib0 and calib1 are the calibration values.
+	 */
+	val = ((dsensor - priv->calib1) * (MCELSIUS(165) /
+		(priv->calib0 - priv->calib1))) - MCELSIUS(40);
+
+	*temp = roundup(val, RZG2L_THERMAL_GRAN);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops rzg2l_tz_of_ops = {
+	.get_temp = rzg2l_thermal_get_temp,
+};
+
+static int rzg2l_thermal_init(struct rzg2l_thermal_priv *priv)
+{
+	u32 reg_val;
+
+	rzg2l_thermal_write(priv, TSU_SM, TSU_SM_NORMAL_MODE);
+	rzg2l_thermal_write(priv, TSU_ST, 0);
+
+	/*
+	 * Before setting the START bit, TSU should be in normal operating
+	 * mode. As per the HW manual, it will take 60 µs to place the TSU
+	 * into normal operating mode.
+	 */
+	usleep_range(60, 80);
+
+	reg_val = rzg2l_thermal_read(priv, TSU_ST);
+	reg_val |= TSU_ST_START;
+	rzg2l_thermal_write(priv, TSU_ST, reg_val);
+
+	return readl_poll_timeout(priv->base + TSU_SS, reg_val,
+				  reg_val == TSU_SS_CONV_RUNNING, 50,
+				  RZG2L_TSU_SS_TIMEOUT_US);
+}
+
+static void rzg2l_thermal_reset_assert_pm_disable_put(struct platform_device *pdev)
+{
+	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	reset_control_assert(priv->rstc);
+}
+
+static void rzg2l_thermal_remove(struct platform_device *pdev)
+{
+	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	thermal_remove_hwmon_sysfs(priv->zone);
+	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+}
+
+static int rzg2l_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *zone;
+	struct rzg2l_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->dev = dev;
+	priv->rstc = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(dev, PTR_ERR(priv->rstc),
+				     "failed to get cpg reset");
+
+	ret = reset_control_deassert(priv->rstc);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to deassert");
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	priv->calib0 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0));
+	if (priv->calib0 & OTPTSUTRIM_EN_MASK)
+		priv->calib0 &= OTPTSUTRIM_MASK;
+	else
+		priv->calib0 = SW_CALIB0_VAL;
+
+	priv->calib1 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(1));
+	if (priv->calib1 & OTPTSUTRIM_EN_MASK)
+		priv->calib1 &= OTPTSUTRIM_MASK;
+	else
+		priv->calib1 = SW_CALIB1_VAL;
+
+	platform_set_drvdata(pdev, priv);
+	ret = rzg2l_thermal_init(priv);
+	if (ret) {
+		dev_err(dev, "Failed to start TSU");
+		goto err;
+	}
+
+	zone = devm_thermal_of_zone_register(dev, 0, priv,
+					     &rzg2l_tz_of_ops);
+	if (IS_ERR(zone)) {
+		dev_err(dev, "Can't register thermal zone");
+		ret = PTR_ERR(zone);
+		goto err;
+	}
+
+	priv->zone = zone;
+	ret = thermal_add_hwmon_sysfs(priv->zone);
+	if (ret)
+		goto err;
+
+	dev_dbg(dev, "TSU probed with %s calibration values",
+		rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0)) ?  "hw" : "sw");
+
+	return 0;
+
+err:
+	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+	return ret;
+}
+
+static const struct of_device_id rzg2l_thermal_dt_ids[] = {
+	{ .compatible = "renesas,rzg2l-tsu", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_thermal_dt_ids);
+
+static struct platform_driver rzg2l_thermal_driver = {
+	.driver = {
+		.name = "rzg2l_thermal",
+		.of_match_table = rzg2l_thermal_dt_ids,
+	},
+	.probe = rzg2l_thermal_probe,
+	.remove = rzg2l_thermal_remove,
+};
+module_platform_driver(rzg2l_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L TSU Thermal Sensor Driver");
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/renesas/rzg3e_thermal.c b/drivers/thermal/renesas/rzg3e_thermal.c
new file mode 100644
index 000000000..c44f5b885
--- /dev/null
+++ b/drivers/thermal/renesas/rzg3e_thermal.c
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G3E TSU Temperature Sensor Unit
+ *
+ * Copyright (C) 2025 Renesas Electronics Corporation
+ */
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "../thermal_hwmon.h"
+
+/* TSU Register offsets and bits */
+#define TSU_SSUSR		0x00
+#define TSU_SSUSR_EN_TS		BIT(0)
+#define TSU_SSUSR_ADC_PD_TS	BIT(1)
+#define TSU_SSUSR_SOC_TS_EN	BIT(2)
+
+#define TSU_STRGR		0x04
+#define TSU_STRGR_ADST		BIT(0)
+
+#define TSU_SOSR1		0x08
+#define TSU_SOSR1_ADCT_8	0x03
+#define TSU_SOSR1_ADCS		BIT(4)
+#define TSU_SOSR1_OUTSEL	BIT(9)
+
+#define TSU_SCRR		0x10
+#define TSU_SCRR_OUT12BIT_TS	GENMASK(11, 0)
+
+#define TSU_SSR			0x14
+#define TSU_SSR_CONV		BIT(0)
+
+#define TSU_CMSR		0x18
+#define TSU_CMSR_CMPEN		BIT(0)
+
+#define TSU_LLSR		0x1C
+#define TSU_ULSR		0x20
+
+#define TSU_SISR		0x30
+#define TSU_SISR_ADF		BIT(0)
+#define TSU_SISR_CMPF		BIT(1)
+
+#define TSU_SIER		0x34
+#define TSU_SIER_CMPIE		BIT(1)
+
+#define TSU_SICR		0x38
+#define TSU_SICR_ADCLR		BIT(0)
+#define TSU_SICR_CMPCLR	BIT(1)
+
+/* Temperature calculation constants from datasheet */
+#define TSU_CODE_MAX		0xFFF
+
+/* Timing specifications from datasheet */
+#define TSU_POWERUP_TIME_US	120	/* 120T at 1MHz sensor clock per datasheet */
+#define TSU_CONV_TIME_US	50	/* Per sample conversion time */
+#define TSU_POLL_DELAY_US	10	/* Polling interval */
+#define TSU_MIN_CLOCK_RATE	24000000  /* TSU_PCLK minimum 24MHz */
+
+#define RZ_SIP_SVC_GET_SYSTSU	0x82000022
+#define OTP_TSU_REG_ADR_TEMPHI	0x01DC
+#define OTP_TSU_REG_ADR_TEMPLO	0x01DD
+
+struct rzg3e_thermal_priv;
+
+struct rzg3e_thermal_info {
+	int (*get_trim)(struct rzg3e_thermal_priv *priv);
+	int temp_d_mc;
+	int temp_e_mc;
+};
+
+/**
+ * struct rzg3e_thermal_priv - RZ/G3E TSU private data
+ * @base: TSU register base
+ * @dev: device pointer
+ * @syscon: regmap for calibration values
+ * @zone: thermal zone device
+ * @rstc: reset control
+ * @info: chip type specific information
+ * @trmval0: calibration value 0 (b)
+ * @trmval1: calibration value 1 (c)
+ * @lock: protects hardware access during conversions
+ */
+struct rzg3e_thermal_priv {
+	void __iomem *base;
+	struct device *dev;
+	struct thermal_zone_device *zone;
+	struct reset_control *rstc;
+	const struct rzg3e_thermal_info *info;
+	u16 trmval0;
+	u16 trmval1;
+	struct mutex lock;
+};
+
+static int rzg3e_thermal_power_on(struct rzg3e_thermal_priv *priv)
+{
+	u32 val;
+	int ret;
+
+	/* Clear any pending interrupts */
+	writel(TSU_SICR_ADCLR | TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+
+	/* Disable all interrupts during setup */
+	writel(0, priv->base + TSU_SIER);
+
+	/*
+	 * Power-on sequence per datasheet 7.11.9.1:
+	 * SOC_TS_EN must be set at same time or before EN_TS and ADC_PD_TS
+	 */
+	val = TSU_SSUSR_SOC_TS_EN | TSU_SSUSR_EN_TS;
+	writel(val, priv->base + TSU_SSUSR);
+
+	/* Wait for sensor stabilization per datasheet 7.11.7.1 */
+	usleep_range(TSU_POWERUP_TIME_US, TSU_POWERUP_TIME_US + 10);
+
+	/* Configure for average mode with 8 samples */
+	val = TSU_SOSR1_OUTSEL | TSU_SOSR1_ADCT_8;
+	writel(val, priv->base + TSU_SOSR1);
+
+	/* Ensure we're in single scan mode (default) */
+	val = readl(priv->base + TSU_SOSR1);
+	if (val & TSU_SOSR1_ADCS) {
+		dev_err(priv->dev, "Invalid scan mode setting\n");
+		return -EINVAL;
+	}
+
+	/* Wait for any ongoing conversion to complete */
+	ret = readl_poll_timeout(priv->base + TSU_SSR, val,
+				 !(val & TSU_SSR_CONV),
+				 TSU_POLL_DELAY_US,
+				 USEC_PER_MSEC);
+	if (ret) {
+		dev_err(priv->dev, "Timeout waiting for conversion\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rzg3e_thermal_power_off(struct rzg3e_thermal_priv *priv)
+{
+	/* Disable all interrupts */
+	writel(0, priv->base + TSU_SIER);
+
+	/* Clear pending interrupts */
+	writel(TSU_SICR_ADCLR | TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+
+	/* Power down sequence per datasheet */
+	writel(TSU_SSUSR_ADC_PD_TS, priv->base + TSU_SSUSR);
+}
+
+/*
+ * Convert 12-bit sensor code to temperature in millicelsius
+ * Formula from datasheet 7.11.7.8:
+ * T(°C) = ((e - d) / (c - b)) * (a - b) + d
+ * where: a = sensor code, b = trmval0, c = trmval1, d = -41, e = 126
+ */
+static int rzg3e_thermal_code_to_temp(struct rzg3e_thermal_priv *priv, u16 code)
+{
+	const struct rzg3e_thermal_info *info = priv->info;
+	s64 numerator, denominator;
+	int temp_mc;
+
+	numerator = (info->temp_e_mc - info->temp_d_mc) *
+		    (s64)(code - priv->trmval0);
+	denominator = priv->trmval1 - priv->trmval0;
+
+	temp_mc = div64_s64(numerator, denominator) + info->temp_d_mc;
+
+	return clamp(temp_mc, info->temp_d_mc, info->temp_e_mc);
+}
+
+/*
+ * Convert temperature in millicelsius to 12-bit sensor code
+ * Formula from datasheet 7.11.7.9 (inverse of above)
+ */
+static u16 rzg3e_thermal_temp_to_code(struct rzg3e_thermal_priv *priv, int temp_mc)
+{
+	const struct rzg3e_thermal_info *info = priv->info;
+	s64 numerator, denominator;
+	s64 code;
+
+	numerator = (temp_mc - info->temp_d_mc) * (priv->trmval1 - priv->trmval0);
+	denominator = info->temp_e_mc - info->temp_d_mc;
+
+	code = div64_s64(numerator, denominator) + priv->trmval0;
+
+	return clamp_val(code, 0, TSU_CODE_MAX);
+}
+
+static int rzg3e_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct rzg3e_thermal_priv *priv = thermal_zone_device_priv(tz);
+	u32 status, code;
+	int ret, timeout;
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret < 0)
+		return ret;
+
+	guard(mutex)(&priv->lock);
+
+	/* Clear any previous conversion status */
+	writel(TSU_SICR_ADCLR, priv->base + TSU_SICR);
+
+	/* Start single conversion */
+	writel(TSU_STRGR_ADST, priv->base + TSU_STRGR);
+
+	/* Wait for conversion completion - 8 samples at ~50us each */
+	timeout = TSU_CONV_TIME_US * 8 * 2;  /* Double for margin */
+	ret = readl_poll_timeout(priv->base + TSU_SISR, status,
+				 status & TSU_SISR_ADF,
+				 TSU_POLL_DELAY_US, timeout);
+	if (ret) {
+		dev_err(priv->dev, "Conversion timeout (status=0x%08x)\n", status);
+		goto out;
+	}
+
+	/* Read the averaged result and clear the complete flag */
+	code = readl(priv->base + TSU_SCRR) & TSU_SCRR_OUT12BIT_TS;
+	writel(TSU_SICR_ADCLR, priv->base + TSU_SICR);
+
+	/* Convert to temperature */
+	*temp = rzg3e_thermal_code_to_temp(priv, code);
+
+	dev_dbg(priv->dev, "temp=%d mC (%d.%03d°C), code=0x%03x\n",
+		*temp, *temp / 1000, abs(*temp) % 1000, code);
+
+out:
+	pm_runtime_mark_last_busy(priv->dev);
+	pm_runtime_put_autosuspend(priv->dev);
+	return ret;
+}
+
+static int rzg3e_thermal_set_trips(struct thermal_zone_device *tz,
+				   int low, int high)
+{
+	struct rzg3e_thermal_priv *priv = thermal_zone_device_priv(tz);
+	u16 low_code, high_code;
+	u32 val;
+	int ret;
+
+	/* Hardware requires low < high */
+	if (low >= high)
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret < 0)
+		return ret;
+
+	guard(mutex)(&priv->lock);
+
+	/* Convert temperatures to codes */
+	low_code = rzg3e_thermal_temp_to_code(priv, low);
+	high_code = rzg3e_thermal_temp_to_code(priv, high);
+
+	dev_dbg(priv->dev, "set_trips: low=%d high=%d (codes: 0x%03x/0x%03x)\n",
+		low, high, low_code, high_code);
+
+	/* Disable comparison during reconfiguration */
+	writel(0, priv->base + TSU_SIER);
+	writel(0, priv->base + TSU_CMSR);
+
+	/* Clear any pending comparison interrupts */
+	writel(TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+
+	/* Set trip points */
+	writel(low_code, priv->base + TSU_LLSR);
+	writel(high_code, priv->base + TSU_ULSR);
+
+	/*
+	 * Ensure OUTSEL is set for comparison per datasheet 7.11.7.4
+	 * Comparison uses averaged data
+	 */
+	val = readl(priv->base + TSU_SOSR1);
+	val |= TSU_SOSR1_OUTSEL;
+	writel(val, priv->base + TSU_SOSR1);
+
+	/* Enable comparison with "out of range" mode (CMPCOND=0) */
+	writel(TSU_CMSR_CMPEN, priv->base + TSU_CMSR);
+
+	/* Unmask compare IRQ and start a conversion to evaluate window */
+	writel(TSU_SIER_CMPIE, priv->base + TSU_SIER);
+	writel(TSU_STRGR_ADST, priv->base + TSU_STRGR);
+
+	pm_runtime_mark_last_busy(priv->dev);
+	pm_runtime_put_autosuspend(priv->dev);
+
+	return 0;
+}
+
+static irqreturn_t rzg3e_thermal_irq_thread(int irq, void *data)
+{
+	struct rzg3e_thermal_priv *priv = data;
+
+	dev_dbg(priv->dev, "Temperature threshold crossed\n");
+
+	/* Notify thermal framework to re-evaluate trip points */
+	thermal_zone_device_update(priv->zone, THERMAL_TRIP_VIOLATED);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rzg3e_thermal_irq(int irq, void *data)
+{
+	struct rzg3e_thermal_priv *priv = data;
+	u32 status;
+
+	status = readl(priv->base + TSU_SISR);
+
+	/* Check if comparison interrupt occurred */
+	if (status & TSU_SISR_CMPF) {
+		/* Clear irq flag and disable interrupt until reconfigured */
+		writel(TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+		writel(0, priv->base + TSU_SIER);
+
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static const struct thermal_zone_device_ops rzg3e_tz_ops = {
+	.get_temp = rzg3e_thermal_get_temp,
+	.set_trips = rzg3e_thermal_set_trips,
+};
+
+static int rzg3e_thermal_get_syscon_trim(struct rzg3e_thermal_priv *priv)
+{
+	struct device_node *np = priv->dev->of_node;
+	struct regmap *syscon;
+	u32 offset;
+	int ret;
+	u32 val;
+
+	syscon = syscon_regmap_lookup_by_phandle_args(np, "renesas,tsu-trim", 1, &offset);
+	if (IS_ERR(syscon))
+		return dev_err_probe(priv->dev, PTR_ERR(syscon),
+				     "Failed to parse renesas,tsu-trim\n");
+
+	/* Read calibration values from syscon */
+	ret = regmap_read(syscon, offset, &val);
+	if (ret)
+		return ret;
+	priv->trmval0 = val & TSU_CODE_MAX;
+
+	ret = regmap_read(syscon, offset + 4, &val);
+	if (ret)
+		return ret;
+	priv->trmval1 = val & TSU_CODE_MAX;
+
+	return 0;
+}
+
+static int rzg3e_thermal_get_smc_trim(struct rzg3e_thermal_priv *priv)
+{
+	struct arm_smccc_res local_res;
+
+	arm_smccc_smc(RZ_SIP_SVC_GET_SYSTSU, OTP_TSU_REG_ADR_TEMPLO,
+		      0, 0, 0, 0, 0, 0, &local_res);
+	priv->trmval0 = local_res.a0 & TSU_CODE_MAX;
+
+	arm_smccc_smc(RZ_SIP_SVC_GET_SYSTSU, OTP_TSU_REG_ADR_TEMPHI,
+		      0, 0, 0, 0, 0, 0, &local_res);
+	priv->trmval1 = local_res.a0 & TSU_CODE_MAX;
+
+	return 0;
+}
+
+static int rzg3e_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rzg3e_thermal_priv *priv;
+	struct clk *clk;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	ret = devm_mutex_init(dev, &priv->lock);
+	if (ret)
+		return ret;
+	platform_set_drvdata(pdev, priv);
+
+	priv->info = device_get_match_data(dev);
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = priv->info->get_trim(priv);
+	if (ret)
+		return ret;
+
+	if (!priv->trmval0 || !priv->trmval1 ||
+	    priv->trmval0 == priv->trmval1 ||
+	    priv->trmval0 == TSU_CODE_MAX || priv->trmval1 == TSU_CODE_MAX)
+		return dev_err_probe(priv->dev, -EINVAL,
+				     "Invalid calibration: b=0x%03x, c=0x%03x\n",
+				     priv->trmval0, priv->trmval1);
+
+	dev_dbg(priv->dev, "Calibration: b=0x%03x (%u), c=0x%03x (%u)\n",
+		priv->trmval0, priv->trmval0, priv->trmval1, priv->trmval1);
+
+	/* Get clock to verify frequency - clock is managed by power domain */
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk),
+				     "Failed to get clock\n");
+
+	if (clk_get_rate(clk) < TSU_MIN_CLOCK_RATE)
+		return dev_err_probe(dev, -EINVAL,
+				     "Clock rate %lu Hz too low (min %u Hz)\n",
+				     clk_get_rate(clk), TSU_MIN_CLOCK_RATE);
+
+	priv->rstc = devm_reset_control_get_optional_exclusive_deasserted(dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(dev, PTR_ERR(priv->rstc),
+				     "Failed to get/deassert reset control\n");
+
+	/* Get comparison interrupt */
+	irq = platform_get_irq_byname(pdev, "adcmpi");
+	if (irq < 0)
+		return irq;
+
+	/* Enable runtime PM */
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
+	devm_pm_runtime_enable(dev);
+
+	/* Initial hardware setup */
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Runtime resume failed\n");
+
+	/* Register thermal zone - this will trigger DT parsing */
+	priv->zone = devm_thermal_of_zone_register(dev, 0, priv, &rzg3e_tz_ops);
+	if (IS_ERR(priv->zone)) {
+		ret = PTR_ERR(priv->zone);
+		dev_err(dev, "Failed to register thermal zone: %d\n", ret);
+		goto err_pm_put;
+	}
+
+	/* Request threaded IRQ for comparison interrupt */
+	ret = devm_request_threaded_irq(dev, irq, rzg3e_thermal_irq,
+					rzg3e_thermal_irq_thread,
+					IRQF_ONESHOT, "rzg3e_thermal", priv);
+	if (ret)
+		goto err_pm_put;
+
+	/* Add hwmon sysfs interface */
+	ret = devm_thermal_add_hwmon_sysfs(dev, priv->zone);
+	if (ret)
+		dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	dev_info(dev, "RZ/G3E thermal sensor registered\n");
+
+	return 0;
+
+err_pm_put:
+	pm_runtime_put_sync(dev);
+	return ret;
+}
+
+static int rzg3e_thermal_runtime_suspend(struct device *dev)
+{
+	struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+
+	rzg3e_thermal_power_off(priv);
+	return 0;
+}
+
+static int rzg3e_thermal_runtime_resume(struct device *dev)
+{
+	struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+
+	return rzg3e_thermal_power_on(priv);
+}
+
+static int rzg3e_thermal_suspend(struct device *dev)
+{
+	struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+
+	/* If device is active, power it off */
+	if (pm_runtime_active(dev))
+		rzg3e_thermal_power_off(priv);
+
+	/* Assert reset to ensure clean state after resume */
+	reset_control_assert(priv->rstc);
+
+	return 0;
+}
+
+static int rzg3e_thermal_resume(struct device *dev)
+{
+	struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	/* Deassert reset */
+	ret = reset_control_deassert(priv->rstc);
+	if (ret) {
+		dev_err(dev, "Failed to deassert reset: %d\n", ret);
+		return ret;
+	}
+
+	/* If device was active before suspend, power it back on */
+	if (pm_runtime_active(dev))
+		return rzg3e_thermal_power_on(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rzg3e_thermal_pm_ops = {
+	RUNTIME_PM_OPS(rzg3e_thermal_runtime_suspend,
+		       rzg3e_thermal_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(rzg3e_thermal_suspend, rzg3e_thermal_resume)
+};
+
+static const struct rzg3e_thermal_info rzg3e_thermal_info = {
+	.get_trim = rzg3e_thermal_get_syscon_trim,
+	.temp_d_mc = -41000,
+	.temp_e_mc = 126000,
+};
+
+static const struct rzg3e_thermal_info rzt2h_thermal_info = {
+	.get_trim = rzg3e_thermal_get_smc_trim,
+	.temp_d_mc = -40000,
+	.temp_e_mc = 125000,
+};
+
+static const struct of_device_id rzg3e_thermal_dt_ids[] = {
+	{ .compatible = "renesas,r9a09g047-tsu", .data = &rzg3e_thermal_info },
+	{ .compatible = "renesas,r9a09g077-tsu", .data = &rzt2h_thermal_info },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg3e_thermal_dt_ids);
+
+static struct platform_driver rzg3e_thermal_driver = {
+	.driver = {
+		.name = "rzg3e_thermal",
+		.of_match_table = rzg3e_thermal_dt_ids,
+		.pm = pm_ptr(&rzg3e_thermal_pm_ops),
+	},
+	.probe = rzg3e_thermal_probe,
+};
+module_platform_driver(rzg3e_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G3E TSU Thermal Sensor Driver");
+MODULE_AUTHOR("John Madieu <john.madieu.xa@bp.renesas.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/renesas/rzg3s_thermal.c b/drivers/thermal/renesas/rzg3s_thermal.c
new file mode 100644
index 000000000..7ced8f76a
--- /dev/null
+++ b/drivers/thermal/renesas/rzg3s_thermal.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G3S TSU Thermal Sensor Driver
+ *
+ * Copyright (C) 2024 Renesas Electronics Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/iio/consumer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "../thermal_hwmon.h"
+
+#define TSU_SM			0x0
+#define TSU_SM_EN		BIT(0)
+#define TSU_SM_OE		BIT(1)
+#define OTPTSUTRIM_REG(n)	(0x18 + (n) * 0x4)
+#define OTPTSUTRIM_EN_MASK	BIT(31)
+#define OTPTSUTRIM_MASK		GENMASK(11, 0)
+
+#define TSU_READ_STEPS		8
+
+/* Default calibration values, if FUSE values are missing. */
+#define SW_CALIB0_VAL		1297
+#define SW_CALIB1_VAL		751
+
+#define MCELSIUS(temp)		((temp) * MILLIDEGREE_PER_DEGREE)
+
+/**
+ * struct rzg3s_thermal_priv - RZ/G3S thermal private data structure
+ * @base: TSU base address
+ * @dev: device pointer
+ * @tz: thermal zone pointer
+ * @rstc: reset control
+ * @channel: IIO channel to read the TSU
+ * @mode: current device mode
+ * @calib0: calibration value
+ * @calib1: calibration value
+ */
+struct rzg3s_thermal_priv {
+	void __iomem *base;
+	struct device *dev;
+	struct thermal_zone_device *tz;
+	struct reset_control *rstc;
+	struct iio_channel *channel;
+	enum thermal_device_mode mode;
+	u16 calib0;
+	u16 calib1;
+};
+
+static int rzg3s_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct rzg3s_thermal_priv *priv = thermal_zone_device_priv(tz);
+	int ts_code_ave = 0;
+
+	if (priv->mode != THERMAL_DEVICE_ENABLED)
+		return -EAGAIN;
+
+	for (u8 i = 0; i < TSU_READ_STEPS; i++) {
+		int ret, val;
+
+		ret = iio_read_channel_raw(priv->channel, &val);
+		if (ret < 0)
+			return ret;
+
+		ts_code_ave += val;
+		/*
+		 * According to the HW manual (Rev.1.10, section 40.4.4 Procedure for Measuring
+		 * the Temperature) we need to wait here at leat 3us.
+		 */
+		usleep_range(5, 10);
+	}
+
+	ts_code_ave = DIV_ROUND_CLOSEST(MCELSIUS(ts_code_ave), TSU_READ_STEPS);
+
+	/*
+	 * According to the HW manual (Rev.1.10, section 40.4.4 Procedure for Measuring the
+	 * Temperature) the computation formula is as follows:
+	 *
+	 * Tj = (ts_code_ave - priv->calib1) * 165 / (priv->calib0 - priv->calib1) - 40
+	 *
+	 * Convert everything to milli Celsius before applying the formula to avoid
+	 * losing precision.
+	 */
+
+	*temp = div_s64((s64)(ts_code_ave - MCELSIUS(priv->calib1)) * MCELSIUS(165),
+			MCELSIUS(priv->calib0 - priv->calib1)) - MCELSIUS(40);
+
+	/* Report it in milli degrees Celsius and round it up to 0.5 degrees Celsius. */
+	*temp = roundup(*temp, 500);
+
+	return 0;
+}
+
+static void rzg3s_thermal_set_mode(struct rzg3s_thermal_priv *priv,
+				   enum thermal_device_mode mode)
+{
+	struct device *dev = priv->dev;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return;
+
+	if (mode == THERMAL_DEVICE_DISABLED) {
+		writel(0, priv->base + TSU_SM);
+	} else {
+		writel(TSU_SM_EN, priv->base + TSU_SM);
+		/*
+		 * According to the HW manual (Rev.1.10, section 40.4.1 Procedure for
+		 * Starting the TSU) we need to wait here 30us or more.
+		 */
+		usleep_range(30, 40);
+
+		writel(TSU_SM_OE | TSU_SM_EN, priv->base + TSU_SM);
+		/*
+		 * According to the HW manual (Rev.1.10, section 40.4.1 Procedure for
+		 * Starting the TSU) we need to wait here 50us or more.
+		 */
+		usleep_range(50, 60);
+	}
+
+	pm_runtime_put_autosuspend(dev);
+}
+
+static int rzg3s_thermal_change_mode(struct thermal_zone_device *tz,
+				     enum thermal_device_mode mode)
+{
+	struct rzg3s_thermal_priv *priv = thermal_zone_device_priv(tz);
+
+	if (priv->mode == mode)
+		return 0;
+
+	rzg3s_thermal_set_mode(priv, mode);
+	priv->mode = mode;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops rzg3s_tz_of_ops = {
+	.get_temp = rzg3s_thermal_get_temp,
+	.change_mode = rzg3s_thermal_change_mode,
+};
+
+static int rzg3s_thermal_read_calib(struct rzg3s_thermal_priv *priv)
+{
+	struct device *dev = priv->dev;
+	u32 val;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	val = readl(priv->base + OTPTSUTRIM_REG(0));
+	if (val & OTPTSUTRIM_EN_MASK)
+		priv->calib0 = FIELD_GET(OTPTSUTRIM_MASK, val);
+	else
+		priv->calib0 = SW_CALIB0_VAL;
+
+	val = readl(priv->base + OTPTSUTRIM_REG(1));
+	if (val & OTPTSUTRIM_EN_MASK)
+		priv->calib1 = FIELD_GET(OTPTSUTRIM_MASK, val);
+	else
+		priv->calib1 = SW_CALIB1_VAL;
+
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static int rzg3s_thermal_probe(struct platform_device *pdev)
+{
+	struct rzg3s_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->channel = devm_iio_channel_get(dev, "tsu");
+	if (IS_ERR(priv->channel))
+		return dev_err_probe(dev, PTR_ERR(priv->channel), "Failed to get IIO channel!\n");
+
+	priv->rstc = devm_reset_control_get_exclusive_deasserted(dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(dev, PTR_ERR(priv->rstc), "Failed to get reset!\n");
+
+	priv->dev = dev;
+	priv->mode = THERMAL_DEVICE_DISABLED;
+	platform_set_drvdata(pdev, priv);
+
+	pm_runtime_set_autosuspend_delay(dev, 300);
+	pm_runtime_use_autosuspend(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable runtime PM!\n");
+
+	ret = rzg3s_thermal_read_calib(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to read calibration data!\n");
+
+	priv->tz = devm_thermal_of_zone_register(dev, 0, priv, &rzg3s_tz_of_ops);
+	if (IS_ERR(priv->tz))
+		return dev_err_probe(dev, PTR_ERR(priv->tz), "Failed to register thermal zone!\n");
+
+	ret = devm_thermal_add_hwmon_sysfs(dev, priv->tz);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add hwmon sysfs!\n");
+
+	return 0;
+}
+
+static int rzg3s_thermal_suspend(struct device *dev)
+{
+	struct rzg3s_thermal_priv *priv = dev_get_drvdata(dev);
+
+	rzg3s_thermal_set_mode(priv, THERMAL_DEVICE_DISABLED);
+
+	return reset_control_assert(priv->rstc);
+}
+
+static int rzg3s_thermal_resume(struct device *dev)
+{
+	struct rzg3s_thermal_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = reset_control_deassert(priv->rstc);
+	if (ret)
+		return ret;
+
+	if (priv->mode != THERMAL_DEVICE_DISABLED)
+		rzg3s_thermal_set_mode(priv, priv->mode);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rzg3s_thermal_pm_ops = {
+	SYSTEM_SLEEP_PM_OPS(rzg3s_thermal_suspend, rzg3s_thermal_resume)
+};
+
+static const struct of_device_id rzg3s_thermal_dt_ids[] = {
+	{ .compatible = "renesas,r9a08g045-tsu" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg3s_thermal_dt_ids);
+
+static struct platform_driver rzg3s_thermal_driver = {
+	.driver = {
+		.name = "rzg3s-thermal",
+		.of_match_table = rzg3s_thermal_dt_ids,
+		.pm = pm_ptr(&rzg3s_thermal_pm_ops),
+	},
+	.probe = rzg3s_thermal_probe,
+};
+module_platform_driver(rzg3s_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G3S Thermal Sensor Unit Driver");
+MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_CONSUMER");