Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

7 files changed, 1025 insertions, 0 deletions

diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
new file mode 100644
index 000000000..061f1db6e
--- /dev/null
+++ b/drivers/thermal/broadcom/Kconfig
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config BCM2711_THERMAL
+	tristate "Broadcom AVS RO thermal sensor driver"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on THERMAL_OF && MFD_SYSCON
+	help
+	  Support for thermal sensors on Broadcom BCM2711 SoCs.
+
+config BCM2835_THERMAL
+	tristate "Thermal sensors on bcm2835 SoC"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on THERMAL_OF
+	help
+	  Support for thermal sensors on Broadcom bcm2835 SoCs.
+
+config BRCMSTB_THERMAL
+	tristate "Broadcom STB AVS TMON thermal driver"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  Enable this driver if you have a Broadcom STB SoC and would like
+	  thermal framework support.
+
+config BCM_NS_THERMAL
+	tristate "Northstar thermal driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default y if ARCH_BCM_IPROC
+	help
+	  Support for the Northstar and Northstar Plus family of SoCs (e.g.
+	  BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+	  Management Unit) block with a thermal sensor that allows checking CPU
+	  temperature.
+
+config BCM_SR_THERMAL
+	tristate "Stingray thermal driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
+	help
+	  Support for the Stingray family of SoCs. Its different blocks like
+	  iHost, CRMU and NITRO has thermal sensor that allows checking its
+	  temperature.
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
new file mode 100644
index 000000000..c917b243d
--- /dev/null
+++ b/drivers/thermal/broadcom/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM2711_THERMAL)		+= bcm2711_thermal.o
+obj-$(CONFIG_BCM2835_THERMAL)		+= bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL)		+= brcmstb_thermal.o
+obj-$(CONFIG_BCM_NS_THERMAL)		+= ns-thermal.o
+obj-$(CONFIG_BCM_SR_THERMAL)		+= sr-thermal.o
diff --git a/drivers/thermal/broadcom/bcm2711_thermal.c b/drivers/thermal/broadcom/bcm2711_thermal.c
new file mode 100644
index 000000000..03ac2d02e
--- /dev/null
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Broadcom AVS RO thermal sensor driver
+ *
+ * based on brcmstb_thermal
+ *
+ * Copyright (C) 2020 Stefan Wahren
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "../thermal_hwmon.h"
+
+#define AVS_RO_TEMP_STATUS		0x200
+#define AVS_RO_TEMP_STATUS_VALID_MSK	(BIT(16) | BIT(10))
+#define AVS_RO_TEMP_STATUS_DATA_MSK	GENMASK(9, 0)
+
+struct bcm2711_thermal_priv {
+	struct regmap *regmap;
+	struct thermal_zone_device *thermal;
+};
+
+static int bcm2711_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct bcm2711_thermal_priv *priv = thermal_zone_device_priv(tz);
+	int slope = thermal_zone_get_slope(tz);
+	int offset = thermal_zone_get_offset(tz);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, AVS_RO_TEMP_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & AVS_RO_TEMP_STATUS_VALID_MSK))
+		return -EIO;
+
+	val &= AVS_RO_TEMP_STATUS_DATA_MSK;
+
+	/* Convert a HW code to a temperature reading (millidegree celsius) */
+	*temp = slope * val + offset;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops bcm2711_thermal_of_ops = {
+	.get_temp	= bcm2711_get_temp,
+};
+
+static const struct of_device_id bcm2711_thermal_id_table[] = {
+	{ .compatible = "brcm,bcm2711-thermal" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2711_thermal_id_table);
+
+static int bcm2711_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal;
+	struct bcm2711_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct device_node *parent;
+	struct regmap *regmap;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* get regmap from syscon node */
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "failed to get regmap: %d\n", ret);
+		return ret;
+	}
+	priv->regmap = regmap;
+
+	thermal = devm_thermal_of_zone_register(dev, 0, priv,
+						&bcm2711_thermal_of_ops);
+	if (IS_ERR(thermal)) {
+		ret = PTR_ERR(thermal);
+		dev_err(dev, "could not register sensor: %d\n", ret);
+		return ret;
+	}
+
+	priv->thermal = thermal;
+
+	return thermal_add_hwmon_sysfs(thermal);
+}
+
+static struct platform_driver bcm2711_thermal_driver = {
+	.probe = bcm2711_thermal_probe,
+	.driver = {
+		.name = "bcm2711_thermal",
+		.of_match_table = bcm2711_thermal_id_table,
+	},
+};
+module_platform_driver(bcm2711_thermal_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefan Wahren");
+MODULE_DESCRIPTION("Broadcom AVS RO thermal sensor driver");
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
new file mode 100644
index 000000000..c5105dfc6
--- /dev/null
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Broadcom BCM2835 SoC temperature sensor
+ *
+ * Copyright (C) 2016 Martin Sperl
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "../thermal_hwmon.h"
+
+#define BCM2835_TS_TSENSCTL			0x00
+#define BCM2835_TS_TSENSSTAT			0x04
+
+#define BCM2835_TS_TSENSCTL_PRWDW		BIT(0)
+#define BCM2835_TS_TSENSCTL_RSTB		BIT(1)
+
+/*
+ * bandgap reference voltage in 6 mV increments
+ * 000b = 1178 mV, 001b = 1184 mV, ... 111b = 1220 mV
+ */
+#define BCM2835_TS_TSENSCTL_CTRL_BITS		3
+#define BCM2835_TS_TSENSCTL_CTRL_SHIFT		2
+#define BCM2835_TS_TSENSCTL_CTRL_MASK		    \
+	GENMASK(BCM2835_TS_TSENSCTL_CTRL_BITS +     \
+		BCM2835_TS_TSENSCTL_CTRL_SHIFT - 1, \
+		BCM2835_TS_TSENSCTL_CTRL_SHIFT)
+#define BCM2835_TS_TSENSCTL_CTRL_DEFAULT	1
+#define BCM2835_TS_TSENSCTL_EN_INT		BIT(5)
+#define BCM2835_TS_TSENSCTL_DIRECT		BIT(6)
+#define BCM2835_TS_TSENSCTL_CLR_INT		BIT(7)
+#define BCM2835_TS_TSENSCTL_THOLD_SHIFT		8
+#define BCM2835_TS_TSENSCTL_THOLD_BITS		10
+#define BCM2835_TS_TSENSCTL_THOLD_MASK		     \
+	GENMASK(BCM2835_TS_TSENSCTL_THOLD_BITS +     \
+		BCM2835_TS_TSENSCTL_THOLD_SHIFT - 1, \
+		BCM2835_TS_TSENSCTL_THOLD_SHIFT)
+/*
+ * time how long the block to be asserted in reset
+ * which based on a clock counter (TSENS clock assumed)
+ */
+#define BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT	18
+#define BCM2835_TS_TSENSCTL_RSTDELAY_BITS	8
+#define BCM2835_TS_TSENSCTL_REGULEN		BIT(26)
+
+#define BCM2835_TS_TSENSSTAT_DATA_BITS		10
+#define BCM2835_TS_TSENSSTAT_DATA_SHIFT		0
+#define BCM2835_TS_TSENSSTAT_DATA_MASK		     \
+	GENMASK(BCM2835_TS_TSENSSTAT_DATA_BITS +     \
+		BCM2835_TS_TSENSSTAT_DATA_SHIFT - 1, \
+		BCM2835_TS_TSENSSTAT_DATA_SHIFT)
+#define BCM2835_TS_TSENSSTAT_VALID		BIT(10)
+#define BCM2835_TS_TSENSSTAT_INTERRUPT		BIT(11)
+
+struct bcm2835_thermal_data {
+	struct thermal_zone_device *tz;
+	void __iomem *regs;
+	struct clk *clk;
+	struct dentry *debugfsdir;
+};
+
+static int bcm2835_thermal_adc2temp(u32 adc, int offset, int slope)
+{
+	return offset + slope * adc;
+}
+
+static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
+{
+	temp -= offset;
+	temp /= slope;
+
+	return clamp(temp, 0, (int)BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1);
+}
+
+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct bcm2835_thermal_data *data = thermal_zone_device_priv(tz);
+	u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT);
+
+	if (!(val & BCM2835_TS_TSENSSTAT_VALID))
+		return -EIO;
+
+	val &= BCM2835_TS_TSENSSTAT_DATA_MASK;
+
+	*temp = bcm2835_thermal_adc2temp(
+		val,
+		thermal_zone_get_offset(data->tz),
+		thermal_zone_get_slope(data->tz));
+
+	return 0;
+}
+
+static const struct debugfs_reg32 bcm2835_thermal_regs[] = {
+	{
+		.name = "ctl",
+		.offset = 0
+	},
+	{
+		.name = "stat",
+		.offset = 4
+	}
+};
+
+static void bcm2835_thermal_debugfs(struct platform_device *pdev)
+{
+	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
+	struct debugfs_regset32 *regset;
+
+	data->debugfsdir = debugfs_create_dir("bcm2835_thermal", NULL);
+
+	regset = devm_kzalloc(&pdev->dev, sizeof(*regset), GFP_KERNEL);
+	if (!regset)
+		return;
+
+	regset->regs = bcm2835_thermal_regs;
+	regset->nregs = ARRAY_SIZE(bcm2835_thermal_regs);
+	regset->base = data->regs;
+
+	debugfs_create_regset32("regset", 0444, data->debugfsdir, regset);
+}
+
+static const struct thermal_zone_device_ops bcm2835_thermal_ops = {
+	.get_temp = bcm2835_thermal_get_temp,
+};
+
+/*
+ * Note: as per Raspberry Foundation FAQ
+ * (https://www.raspberrypi.org/help/faqs/#performanceOperatingTemperature)
+ * the recommended temperature range for the SoC -40C to +85C
+ * so the trip limit is set to 80C.
+ * this applies to all the BCM283X SoC
+ */
+
+static const struct of_device_id bcm2835_thermal_of_match_table[] = {
+	{
+		.compatible = "brcm,bcm2835-thermal",
+	},
+	{
+		.compatible = "brcm,bcm2836-thermal",
+	},
+	{
+		.compatible = "brcm,bcm2837-thermal",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table);
+
+static int bcm2835_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+	struct thermal_zone_device *tz;
+	struct bcm2835_thermal_data *data;
+	int err = 0;
+	u32 val;
+	unsigned long rate;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	match = of_match_device(bcm2835_thermal_of_match_table, dev);
+	if (!match)
+		return -EINVAL;
+
+	data->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(data->regs)) {
+		err = PTR_ERR(data->regs);
+		return err;
+	}
+
+	data->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(data->clk))
+		return dev_err_probe(dev, PTR_ERR(data->clk), "Could not get clk\n");
+
+	rate = clk_get_rate(data->clk);
+	if ((rate < 1920000) || (rate > 5000000))
+		dev_warn(dev,
+			 "Clock %pC running at %lu Hz is outside of the recommended range: 1.92 to 5MHz\n",
+			 data->clk, rate);
+
+	/* register of thermal sensor and get info from DT */
+	tz = devm_thermal_of_zone_register(dev, 0, data, &bcm2835_thermal_ops);
+	if (IS_ERR(tz))
+		return dev_err_probe(dev, PTR_ERR(tz), "Failed to register the thermal device\n");
+
+	/*
+	 * right now the FW does set up the HW-block, so we are not
+	 * touching the configuration registers.
+	 * But if the HW is not enabled, then set it up
+	 * using "sane" values used by the firmware right now.
+	 */
+	val = readl(data->regs + BCM2835_TS_TSENSCTL);
+	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
+		int offset, slope, crit_temp;
+
+		slope = thermal_zone_get_slope(tz);
+		offset = thermal_zone_get_offset(tz);
+		/*
+		 * For now we deal only with critical, otherwise
+		 * would need to iterate
+		 */
+		err = thermal_zone_get_crit_temp(tz, &crit_temp);
+		if (err < 0) {
+			dev_err(dev, "Not able to read trip_temp: %d\n", err);
+			return err;
+		}
+
+		/* set bandgap reference voltage and enable voltage regulator */
+		val = (BCM2835_TS_TSENSCTL_CTRL_DEFAULT <<
+		       BCM2835_TS_TSENSCTL_CTRL_SHIFT) |
+		      BCM2835_TS_TSENSCTL_REGULEN;
+
+		/* use the recommended reset duration */
+		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
+
+		/*  trip_adc value from info */
+		val |= bcm2835_thermal_temp2adc(crit_temp,
+						offset,
+						slope)
+			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
+
+		/* write the value back to the register as 2 steps */
+		writel(val, data->regs + BCM2835_TS_TSENSCTL);
+		val |= BCM2835_TS_TSENSCTL_RSTB;
+		writel(val, data->regs + BCM2835_TS_TSENSCTL);
+	}
+
+	data->tz = tz;
+
+	platform_set_drvdata(pdev, data);
+
+	/*
+	 * Thermal_zone doesn't enable hwmon as default,
+	 * enable it here
+	 */
+	err = thermal_add_hwmon_sysfs(tz);
+	if (err)
+		return err;
+
+	bcm2835_thermal_debugfs(pdev);
+
+	return 0;
+}
+
+static void bcm2835_thermal_remove(struct platform_device *pdev)
+{
+	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(data->debugfsdir);
+}
+
+static struct platform_driver bcm2835_thermal_driver = {
+	.probe = bcm2835_thermal_probe,
+	.remove = bcm2835_thermal_remove,
+	.driver = {
+		.name = "bcm2835_thermal",
+		.of_match_table = bcm2835_thermal_of_match_table,
+	},
+};
+module_platform_driver(bcm2835_thermal_driver);
+
+MODULE_AUTHOR("Martin Sperl");
+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 000000000..5e23f9e00
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ */
+
+#define DRV_NAME	"brcmstb_thermal"
+
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS			0x00
+ #define AVS_TMON_STATUS_valid_msk	BIT(11)
+ #define AVS_TMON_STATUS_data_msk	GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift	1
+
+#define AVS_TMON_EN_OVERTEMP_RESET	0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk	BIT(0)
+
+#define AVS_TMON_RESET_THRESH		0x08
+ #define AVS_TMON_RESET_THRESH_msk	GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift	1
+
+#define AVS_TMON_INT_IDLE_TIME		0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS	0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high	BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low	BIT(0)
+
+#define AVS_TMON_INT_THRESH		0x18
+ #define AVS_TMON_INT_THRESH_high_msk	GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift	17
+ #define AVS_TMON_INT_THRESH_low_msk	GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift	1
+
+#define AVS_TMON_TEMP_INT_CODE		0x1c
+#define AVS_TMON_TP_TEST_ENABLE		0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE		487
+#define AVS_TMON_TEMP_OFFSET		410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX		0x3ff
+#define AVS_TMON_TEMP_MIN		-88161
+#define AVS_TMON_TEMP_MASK		AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+	TMON_TRIP_TYPE_LOW = 0,
+	TMON_TRIP_TYPE_HIGH,
+	TMON_TRIP_TYPE_RESET,
+	TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+	/* HW bit to enable the trip */
+	u32 enable_offs;
+	u32 enable_mask;
+
+	/* HW field to read the trip temperature */
+	u32 reg_offs;
+	u32 reg_msk;
+	int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+	/* Trips when temperature is below threshold */
+	[TMON_TRIP_TYPE_LOW] = {
+		.enable_offs	= AVS_TMON_EN_TEMP_INT_SRCS,
+		.enable_mask	= AVS_TMON_EN_TEMP_INT_SRCS_low,
+		.reg_offs	= AVS_TMON_INT_THRESH,
+		.reg_msk	= AVS_TMON_INT_THRESH_low_msk,
+		.reg_shift	= AVS_TMON_INT_THRESH_low_shift,
+	},
+	/* Trips when temperature is above threshold */
+	[TMON_TRIP_TYPE_HIGH] = {
+		.enable_offs	= AVS_TMON_EN_TEMP_INT_SRCS,
+		.enable_mask	= AVS_TMON_EN_TEMP_INT_SRCS_high,
+		.reg_offs	= AVS_TMON_INT_THRESH,
+		.reg_msk	= AVS_TMON_INT_THRESH_high_msk,
+		.reg_shift	= AVS_TMON_INT_THRESH_high_shift,
+	},
+	/* Automatically resets chip when above threshold */
+	[TMON_TRIP_TYPE_RESET] = {
+		.enable_offs	= AVS_TMON_EN_OVERTEMP_RESET,
+		.enable_mask	= AVS_TMON_EN_OVERTEMP_RESET_msk,
+		.reg_offs	= AVS_TMON_RESET_THRESH,
+		.reg_msk	= AVS_TMON_RESET_THRESH_msk,
+		.reg_shift	= AVS_TMON_RESET_THRESH_shift,
+	},
+};
+
+struct brcmstb_thermal_params {
+	unsigned int offset;
+	unsigned int mult;
+	const struct thermal_zone_device_ops *of_ops;
+};
+
+struct brcmstb_thermal_priv {
+	void __iomem *tmon_base;
+	struct device *dev;
+	struct thermal_zone_device *thermal;
+	/* Process specific thermal parameters used for calculations */
+	const struct brcmstb_thermal_params *temp_params;
+};
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct brcmstb_thermal_priv *priv,
+					u32 code)
+{
+	int offset = priv->temp_params->offset;
+	int mult = priv->temp_params->mult;
+
+	return (offset - (int)((code & AVS_TMON_TEMP_MASK) * mult));
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
+					int temp, bool low)
+{
+	int offset = priv->temp_params->offset;
+	int mult = priv->temp_params->mult;
+
+	if (temp < AVS_TMON_TEMP_MIN)
+		return AVS_TMON_TEMP_MAX;	/* Maximum code value */
+
+	if (temp >= offset)
+		return 0;	/* Minimum code value */
+
+	if (low)
+		return (u32)(DIV_ROUND_UP(offset - temp, mult));
+	else
+		return (u32)((offset - temp) / mult);
+}
+
+static int brcmstb_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct brcmstb_thermal_priv *priv = thermal_zone_device_priv(tz);
+	u32 val;
+	int t;
+
+	val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+	if (!(val & AVS_TMON_STATUS_valid_msk))
+		return -EIO;
+
+	val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+	t = avs_tmon_code_to_temp(priv, val);
+	*temp = max(0, t);
+
+	return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+				 enum avs_tmon_trip_type type, int en)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+	dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+	if (en)
+		val |= trip->enable_mask;
+	else
+		val &= ~trip->enable_mask;
+
+	__raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+				  enum avs_tmon_trip_type type)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+	val &= trip->reg_msk;
+	val >>= trip->reg_shift;
+
+	return avs_tmon_code_to_temp(priv, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+				   enum avs_tmon_trip_type type,
+				   int temp)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val, orig;
+
+	dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+	/* round toward low temp for the low interrupt */
+	val = avs_tmon_temp_to_code(priv, temp,
+				    type == TMON_TRIP_TYPE_LOW);
+
+	val <<= trip->reg_shift;
+	val &= trip->reg_msk;
+
+	orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+	orig &= ~trip->reg_msk;
+	orig |= val;
+	__raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+	u32 val;
+
+	val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+	return avs_tmon_code_to_temp(priv, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+	struct brcmstb_thermal_priv *priv = data;
+	int low, high, intr;
+
+	low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+	high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+	intr = avs_tmon_get_intr_temp(priv);
+
+	dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+			low, intr, high);
+
+	/* Disable high-temp until next threshold shift */
+	if (intr >= high)
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+	/* Disable low-temp until next threshold shift */
+	if (intr <= low)
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+	/*
+	 * Notify using the interrupt temperature, in case the temperature
+	 * changes before it can next be read out
+	 */
+	thermal_zone_device_update(priv->thermal, intr);
+
+	return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+	struct brcmstb_thermal_priv *priv = thermal_zone_device_priv(tz);
+
+	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+	/*
+	 * Disable low-temp if "low" is too small. As per thermal framework
+	 * API, we use -INT_MAX rather than INT_MIN.
+	 */
+	if (low <= -INT_MAX) {
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+	} else {
+		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+	}
+
+	/* Disable high-temp if "high" is too big. */
+	if (high == INT_MAX) {
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+	} else {
+		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+	}
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops brcmstb_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+};
+
+static const struct brcmstb_thermal_params brcmstb_8nm_params = {
+	.offset	= 418670,
+	.mult	= 509,
+	.of_ops	= &brcmstb_of_ops,
+};
+
+static const struct brcmstb_thermal_params brcmstb_16nm_params = {
+	.offset	= 457829,
+	.mult	= 557,
+	.of_ops	= &brcmstb_of_ops,
+};
+
+static const struct thermal_zone_device_ops brcmstb_28nm_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+	.set_trips	= brcmstb_set_trips,
+};
+
+static const struct brcmstb_thermal_params brcmstb_28nm_params = {
+	.offset	= 410040,
+	.mult	= 487,
+	.of_ops	= &brcmstb_28nm_of_ops,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+	{ .compatible = "brcm,avs-tmon-bcm74110", .data = &brcmstb_8nm_params },
+	{ .compatible = "brcm,avs-tmon-bcm7216", .data = &brcmstb_16nm_params },
+	{ .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+	const struct thermal_zone_device_ops *of_ops;
+	struct thermal_zone_device *thermal;
+	struct brcmstb_thermal_priv *priv;
+	int irq, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->temp_params = of_device_get_match_data(&pdev->dev);
+	if (!priv->temp_params)
+		return -EINVAL;
+
+	priv->tmon_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(priv->tmon_base))
+		return PTR_ERR(priv->tmon_base);
+
+	priv->dev = &pdev->dev;
+	of_ops = priv->temp_params->of_ops;
+
+	thermal = devm_thermal_of_zone_register(&pdev->dev, 0, priv,
+						of_ops);
+	if (IS_ERR(thermal))
+		return dev_err_probe(&pdev->dev, PTR_ERR(thermal),
+					"could not register sensor\n");
+
+	priv->thermal = thermal;
+
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq >= 0) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						brcmstb_tmon_irq_thread,
+						IRQF_ONESHOT,
+						DRV_NAME, priv);
+		if (ret < 0)
+			return ret;
+	}
+
+	dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+	return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+	.probe = brcmstb_thermal_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = brcmstb_thermal_id_table,
+	},
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c
new file mode 100644
index 000000000..8b5b32f74
--- /dev/null
+++ b/drivers/thermal/broadcom/ns-thermal.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define PVTMON_CONTROL0					0x00
+#define PVTMON_CONTROL0_SEL_MASK			0x0000000e
+#define PVTMON_CONTROL0_SEL_TEMP_MONITOR		0x00000000
+#define PVTMON_CONTROL0_SEL_TEST_MODE			0x0000000e
+#define PVTMON_STATUS					0x08
+
+static int ns_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	void __iomem *pvtmon = thermal_zone_device_priv(tz);
+	int offset = thermal_zone_get_offset(tz);
+	int slope = thermal_zone_get_slope(tz);
+	u32 val;
+
+	val = readl(pvtmon + PVTMON_CONTROL0);
+	if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) {
+		/* Clear current mode selection */
+		val &= ~PVTMON_CONTROL0_SEL_MASK;
+
+		/* Set temp monitor mode (it's the default actually) */
+		val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR;
+
+		writel(val, pvtmon + PVTMON_CONTROL0);
+	}
+
+	val = readl(pvtmon + PVTMON_STATUS);
+	*temp = slope * val + offset;
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops ns_thermal_ops = {
+	.get_temp = ns_thermal_get_temp,
+};
+
+static int ns_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct thermal_zone_device *tz;
+	void __iomem *pvtmon;
+
+	pvtmon = of_iomap(dev_of_node(dev), 0);
+	if (WARN_ON(!pvtmon))
+		return -ENOENT;
+
+	tz = devm_thermal_of_zone_register(dev, 0,
+					   pvtmon,
+					   &ns_thermal_ops);
+	if (IS_ERR(tz)) {
+		iounmap(pvtmon);
+		return PTR_ERR(tz);
+	}
+
+	platform_set_drvdata(pdev, pvtmon);
+
+	return 0;
+}
+
+static void ns_thermal_remove(struct platform_device *pdev)
+{
+	void __iomem *pvtmon = platform_get_drvdata(pdev);
+
+	iounmap(pvtmon);
+}
+
+static const struct of_device_id ns_thermal_of_match[] = {
+	{ .compatible = "brcm,ns-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ns_thermal_of_match);
+
+static struct platform_driver ns_thermal_driver = {
+	.probe		= ns_thermal_probe,
+	.remove		= ns_thermal_remove,
+	.driver = {
+		.name = "ns-thermal",
+		.of_match_table = ns_thermal_of_match,
+	},
+};
+module_platform_driver(ns_thermal_driver);
+
+MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>");
+MODULE_DESCRIPTION("Northstar thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
new file mode 100644
index 000000000..9a29dfd4c
--- /dev/null
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Broadcom
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+/*
+ * In stingray thermal IO memory,
+ * Total Number of available TMONs MASK is at offset 0
+ * temperature registers BASE is at 4 byte offset.
+ * Each TMON temperature register size is 4.
+ */
+#define SR_TMON_TEMP_BASE(id)   ((id) * 0x4)
+
+#define SR_TMON_MAX_LIST        6
+
+struct sr_tmon {
+	unsigned int crit_temp;
+	unsigned int tmon_id;
+	struct sr_thermal *priv;
+};
+
+struct sr_thermal {
+	void __iomem *regs;
+	unsigned int max_crit_temp;
+	struct sr_tmon tmon[SR_TMON_MAX_LIST];
+};
+
+static int sr_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct sr_tmon *tmon = thermal_zone_device_priv(tz);
+	struct sr_thermal *sr_thermal = tmon->priv;
+
+	*temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops sr_tz_ops = {
+	.get_temp = sr_get_temp,
+};
+
+static int sr_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct thermal_zone_device *tz;
+	struct sr_thermal *sr_thermal;
+	struct sr_tmon *tmon;
+	struct resource *res;
+	u32 sr_tmon_list = 0;
+	unsigned int i;
+	int ret;
+
+	sr_thermal = devm_kzalloc(dev, sizeof(*sr_thermal), GFP_KERNEL);
+	if (!sr_thermal)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start,
+							 resource_size(res),
+							 MEMREMAP_WB);
+	if (IS_ERR(sr_thermal->regs)) {
+		dev_err(dev, "failed to get io address\n");
+		return PTR_ERR(sr_thermal->regs);
+	}
+
+	ret = device_property_read_u32(dev, "brcm,tmon-mask", &sr_tmon_list);
+	if (ret)
+		return ret;
+
+	tmon = sr_thermal->tmon;
+	for (i = 0; i < SR_TMON_MAX_LIST; i++, tmon++) {
+		if (!(sr_tmon_list & BIT(i)))
+			continue;
+
+		/* Flush temperature registers */
+		writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
+		tmon->tmon_id = i;
+		tmon->priv = sr_thermal;
+		tz = devm_thermal_of_zone_register(dev, i, tmon,
+						   &sr_tz_ops);
+		if (IS_ERR(tz))
+			return PTR_ERR(tz);
+
+		dev_dbg(dev, "thermal sensor %d registered\n", i);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sr_thermal_of_match[] = {
+	{ .compatible = "brcm,sr-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sr_thermal_of_match);
+
+static struct platform_driver sr_thermal_driver = {
+	.probe		= sr_thermal_probe,
+	.driver = {
+		.name = "sr-thermal",
+		.of_match_table = sr_thermal_of_match,
+	},
+};
+module_platform_driver(sr_thermal_driver);
+
+MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
+MODULE_DESCRIPTION("Stingray thermal driver");
+MODULE_LICENSE("GPL v2");