Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 625 insertions, 0 deletions

diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
new file mode 100644
index 000000000..57b7c0cb4
--- /dev/null
+++ b/drivers/spmi/spmi.c
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spmi.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/spmi/spmi.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/spmi.h>
+
+static bool is_registered;
+static DEFINE_IDA(ctrl_ida);
+
+static void spmi_dev_release(struct device *dev)
+{
+	struct spmi_device *sdev = to_spmi_device(dev);
+
+	kfree(sdev);
+}
+
+static const struct device_type spmi_dev_type = {
+	.release	= spmi_dev_release,
+};
+
+static void spmi_ctrl_release(struct device *dev)
+{
+	struct spmi_controller *ctrl = to_spmi_controller(dev);
+
+	ida_free(&ctrl_ida, ctrl->nr);
+	kfree(ctrl);
+}
+
+static const struct device_type spmi_ctrl_type = {
+	.release	= spmi_ctrl_release,
+};
+
+static int spmi_device_match(struct device *dev, const struct device_driver *drv)
+{
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
+	if (drv->name)
+		return strncmp(dev_name(dev), drv->name,
+			       SPMI_NAME_SIZE) == 0;
+
+	return 0;
+}
+
+/**
+ * spmi_device_add() - add a device previously constructed via spmi_device_alloc()
+ * @sdev:	spmi_device to be added
+ */
+int spmi_device_add(struct spmi_device *sdev)
+{
+	struct spmi_controller *ctrl = sdev->ctrl;
+	int err;
+
+	dev_set_name(&sdev->dev, "%d-%02x", ctrl->nr, sdev->usid);
+
+	err = device_add(&sdev->dev);
+	if (err < 0) {
+		dev_err(&sdev->dev, "Can't add %s, status %d\n",
+			dev_name(&sdev->dev), err);
+		goto err_device_add;
+	}
+
+	dev_dbg(&sdev->dev, "device %s registered\n", dev_name(&sdev->dev));
+
+err_device_add:
+	return err;
+}
+EXPORT_SYMBOL_GPL(spmi_device_add);
+
+/**
+ * spmi_device_remove(): remove an SPMI device
+ * @sdev:	spmi_device to be removed
+ */
+void spmi_device_remove(struct spmi_device *sdev)
+{
+	device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_device_remove);
+
+static inline int
+spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
+{
+	int ret;
+
+	if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type)
+		return -EINVAL;
+
+	ret = ctrl->cmd(ctrl, opcode, sid);
+	trace_spmi_cmd(opcode, sid, ret);
+	return ret;
+}
+
+static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode,
+				u8 sid, u16 addr, u8 *buf, size_t len)
+{
+	int ret;
+
+	if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type)
+		return -EINVAL;
+
+	trace_spmi_read_begin(opcode, sid, addr);
+	ret = ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
+	trace_spmi_read_end(opcode, sid, addr, ret, len, buf);
+	return ret;
+}
+
+static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode,
+				 u8 sid, u16 addr, const u8 *buf, size_t len)
+{
+	int ret;
+
+	if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type)
+		return -EINVAL;
+
+	trace_spmi_write_begin(opcode, sid, addr, len, buf);
+	ret = ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
+	trace_spmi_write_end(opcode, sid, addr, ret);
+	return ret;
+}
+
+/**
+ * spmi_register_read() - register read
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (5-bit address).
+ * @buf:	buffer to be populated with data from the Slave.
+ *
+ * Reads 1 byte of data from a Slave device register.
+ */
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf)
+{
+	/* 5-bit register address */
+	if (addr > 0x1F)
+		return -EINVAL;
+
+	return spmi_read_cmd(sdev->ctrl, SPMI_CMD_READ, sdev->usid, addr,
+			     buf, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_read);
+
+/**
+ * spmi_ext_register_read() - extended register read
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (8-bit address).
+ * @buf:	buffer to be populated with data from the Slave.
+ * @len:	the request number of bytes to read (up to 16 bytes).
+ *
+ * Reads up to 16 bytes of data from the extended register space on a
+ * Slave device.
+ */
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+			   size_t len)
+{
+	/* 8-bit register address, up to 16 bytes */
+	if (len == 0 || len > 16)
+		return -EINVAL;
+
+	return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READ, sdev->usid, addr,
+			     buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_read);
+
+/**
+ * spmi_ext_register_readl() - extended register read long
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (16-bit address).
+ * @buf:	buffer to be populated with data from the Slave.
+ * @len:	the request number of bytes to read (up to 8 bytes).
+ *
+ * Reads up to 8 bytes of data from the extended register space on a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+			    size_t len)
+{
+	/* 16-bit register address, up to 8 bytes */
+	if (len == 0 || len > 8)
+		return -EINVAL;
+
+	return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READL, sdev->usid, addr,
+			     buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_readl);
+
+/**
+ * spmi_register_write() - register write
+ * @sdev:	SPMI device
+ * @addr:	slave register address (5-bit address).
+ * @data:	buffer containing the data to be transferred to the Slave.
+ *
+ * Writes 1 byte of data to a Slave device register.
+ */
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data)
+{
+	/* 5-bit register address */
+	if (addr > 0x1F)
+		return -EINVAL;
+
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_WRITE, sdev->usid, addr,
+			      &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_write);
+
+/**
+ * spmi_register_zero_write() - register zero write
+ * @sdev:	SPMI device.
+ * @data:	the data to be written to register 0 (7-bits).
+ *
+ * Writes data to register 0 of the Slave device.
+ */
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data)
+{
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_ZERO_WRITE, sdev->usid, 0,
+			      &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_zero_write);
+
+/**
+ * spmi_ext_register_write() - extended register write
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (8-bit address).
+ * @buf:	buffer containing the data to be transferred to the Slave.
+ * @len:	the request number of bytes to read (up to 16 bytes).
+ *
+ * Writes up to 16 bytes of data to the extended register space of a
+ * Slave device.
+ */
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr, const u8 *buf,
+			    size_t len)
+{
+	/* 8-bit register address, up to 16 bytes */
+	if (len == 0 || len > 16)
+		return -EINVAL;
+
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITE, sdev->usid, addr,
+			      buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_write);
+
+/**
+ * spmi_ext_register_writel() - extended register write long
+ * @sdev:	SPMI device.
+ * @addr:	slave register address (16-bit address).
+ * @buf:	buffer containing the data to be transferred to the Slave.
+ * @len:	the request number of bytes to read (up to 8 bytes).
+ *
+ * Writes up to 8 bytes of data to the extended register space of a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr, const u8 *buf,
+			     size_t len)
+{
+	/* 4-bit Slave Identifier, 16-bit register address, up to 8 bytes */
+	if (len == 0 || len > 8)
+		return -EINVAL;
+
+	return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITEL, sdev->usid,
+			      addr, buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_writel);
+
+/**
+ * spmi_command_reset() - sends RESET command to the specified slave
+ * @sdev:	SPMI device.
+ *
+ * The Reset command initializes the Slave and forces all registers to
+ * their reset values. The Slave shall enter the STARTUP state after
+ * receiving a Reset command.
+ */
+int spmi_command_reset(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_RESET, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_reset);
+
+/**
+ * spmi_command_sleep() - sends SLEEP command to the specified SPMI device
+ * @sdev:	SPMI device.
+ *
+ * The Sleep command causes the Slave to enter the user defined SLEEP state.
+ */
+int spmi_command_sleep(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_SLEEP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_sleep);
+
+/**
+ * spmi_command_wakeup() - sends WAKEUP command to the specified SPMI device
+ * @sdev:	SPMI device.
+ *
+ * The Wakeup command causes the Slave to move from the SLEEP state to
+ * the ACTIVE state.
+ */
+int spmi_command_wakeup(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_WAKEUP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_wakeup);
+
+/**
+ * spmi_command_shutdown() - sends SHUTDOWN command to the specified SPMI device
+ * @sdev:	SPMI device.
+ *
+ * The Shutdown command causes the Slave to enter the SHUTDOWN state.
+ */
+int spmi_command_shutdown(struct spmi_device *sdev)
+{
+	return spmi_cmd(sdev->ctrl, SPMI_CMD_SHUTDOWN, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_shutdown);
+
+static int spmi_drv_probe(struct device *dev)
+{
+	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+	struct spmi_device *sdev = to_spmi_device(dev);
+	int err;
+
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	err = sdrv->probe(sdev);
+	if (err)
+		goto fail_probe;
+
+	return 0;
+
+fail_probe:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+	return err;
+}
+
+static void spmi_drv_remove(struct device *dev)
+{
+	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+
+	pm_runtime_get_sync(dev);
+	if (sdrv->remove)
+		sdrv->remove(to_spmi_device(dev));
+	pm_runtime_put_noidle(dev);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+}
+
+static void spmi_drv_shutdown(struct device *dev)
+{
+	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+
+	if (sdrv && sdrv->shutdown)
+		sdrv->shutdown(to_spmi_device(dev));
+}
+
+static int spmi_drv_uevent(const struct device *dev, struct kobj_uevent_env *env)
+{
+	int ret;
+
+	ret = of_device_uevent_modalias(dev, env);
+	if (ret != -ENODEV)
+		return ret;
+
+	return 0;
+}
+
+static const struct bus_type spmi_bus_type = {
+	.name		= "spmi",
+	.match		= spmi_device_match,
+	.probe		= spmi_drv_probe,
+	.remove		= spmi_drv_remove,
+	.shutdown	= spmi_drv_shutdown,
+	.uevent		= spmi_drv_uevent,
+};
+
+/**
+ * spmi_find_device_by_of_node() - look up an SPMI device from a device node
+ *
+ * @np:		device node
+ *
+ * Takes a reference to the embedded struct device which needs to be dropped
+ * after use.
+ *
+ * Returns the struct spmi_device associated with a device node or NULL.
+ */
+struct spmi_device *spmi_find_device_by_of_node(struct device_node *np)
+{
+	struct device *dev = bus_find_device_by_of_node(&spmi_bus_type, np);
+
+	if (dev)
+		return to_spmi_device(dev);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(spmi_find_device_by_of_node);
+
+/**
+ * spmi_device_alloc() - Allocate a new SPMI device
+ * @ctrl:	associated controller
+ *
+ * Caller is responsible for either calling spmi_device_add() to add the
+ * newly allocated controller, or calling spmi_device_put() to discard it.
+ */
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl)
+{
+	struct spmi_device *sdev;
+
+	sdev = kzalloc_obj(*sdev);
+	if (!sdev)
+		return NULL;
+
+	sdev->ctrl = ctrl;
+	device_initialize(&sdev->dev);
+	sdev->dev.parent = &ctrl->dev;
+	sdev->dev.bus = &spmi_bus_type;
+	sdev->dev.type = &spmi_dev_type;
+	return sdev;
+}
+EXPORT_SYMBOL_GPL(spmi_device_alloc);
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI controller
+ * @parent:	parent device
+ * @size:	size of private data
+ *
+ * Caller is responsible for either calling spmi_controller_add() to add the
+ * newly allocated controller, or calling spmi_controller_put() to discard it.
+ * The allocated private data region may be accessed via
+ * spmi_controller_get_drvdata()
+ */
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+					      size_t size)
+{
+	struct spmi_controller *ctrl;
+	int id;
+
+	if (WARN_ON(!parent))
+		return ERR_PTR(-EINVAL);
+
+	ctrl = kzalloc_flex(*ctrl, priv, size);
+	if (!ctrl)
+		return ERR_PTR(-ENOMEM);
+
+	device_initialize(&ctrl->dev);
+	ctrl->dev.type = &spmi_ctrl_type;
+	ctrl->dev.bus = &spmi_bus_type;
+	ctrl->dev.parent = parent;
+	ctrl->dev.of_node = parent->of_node;
+	spmi_controller_set_drvdata(ctrl, ctrl->priv);
+
+	id = ida_alloc(&ctrl_ida, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(parent,
+			"unable to allocate SPMI controller identifier.\n");
+		spmi_controller_put(ctrl);
+		return ERR_PTR(id);
+	}
+
+	ctrl->nr = id;
+	dev_set_name(&ctrl->dev, "spmi-%d", id);
+
+	dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
+	return ctrl;
+}
+EXPORT_SYMBOL_GPL(spmi_controller_alloc);
+
+static void of_spmi_register_devices(struct spmi_controller *ctrl)
+{
+	struct device_node *node;
+	int err;
+
+	if (!ctrl->dev.of_node)
+		return;
+
+	for_each_available_child_of_node(ctrl->dev.of_node, node) {
+		struct spmi_device *sdev;
+		u32 reg[2];
+
+		dev_dbg(&ctrl->dev, "adding child %pOF\n", node);
+
+		err = of_property_read_u32_array(node, "reg", reg, 2);
+		if (err) {
+			dev_err(&ctrl->dev,
+				"node %pOF err (%d) does not have 'reg' property\n",
+				node, err);
+			continue;
+		}
+
+		if (reg[1] != SPMI_USID) {
+			dev_err(&ctrl->dev,
+				"node %pOF contains unsupported 'reg' entry\n",
+				node);
+			continue;
+		}
+
+		if (reg[0] >= SPMI_MAX_SLAVE_ID) {
+			dev_err(&ctrl->dev, "invalid usid on node %pOF\n", node);
+			continue;
+		}
+
+		dev_dbg(&ctrl->dev, "read usid %02x\n", reg[0]);
+
+		sdev = spmi_device_alloc(ctrl);
+		if (!sdev)
+			continue;
+
+		device_set_node(&sdev->dev, of_fwnode_handle(node));
+		sdev->usid = (u8)reg[0];
+
+		err = spmi_device_add(sdev);
+		if (err) {
+			dev_err(&sdev->dev,
+				"failure adding device. status %d\n", err);
+			spmi_device_put(sdev);
+		}
+	}
+}
+
+/**
+ * spmi_controller_add() - Add an SPMI controller
+ * @ctrl:	controller to be registered.
+ *
+ * Register a controller previously allocated via spmi_controller_alloc() with
+ * the SPMI core.
+ */
+int spmi_controller_add(struct spmi_controller *ctrl)
+{
+	int ret;
+
+	/* Can't register until after driver model init */
+	if (WARN_ON(!is_registered))
+		return -EAGAIN;
+
+	ret = device_add(&ctrl->dev);
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_OF))
+		of_spmi_register_devices(ctrl);
+
+	dev_dbg(&ctrl->dev, "spmi-%d registered: dev:%p\n",
+		ctrl->nr, &ctrl->dev);
+
+	return 0;
+};
+EXPORT_SYMBOL_GPL(spmi_controller_add);
+
+/* Remove a device associated with a controller */
+static int spmi_ctrl_remove_device(struct device *dev, void *data)
+{
+	struct spmi_device *spmidev = to_spmi_device(dev);
+
+	if (dev->type == &spmi_dev_type)
+		spmi_device_remove(spmidev);
+	return 0;
+}
+
+/**
+ * spmi_controller_remove(): remove an SPMI controller
+ * @ctrl:	controller to remove
+ *
+ * Remove a SPMI controller.  Caller is responsible for calling
+ * spmi_controller_put() to discard the allocated controller.
+ */
+void spmi_controller_remove(struct spmi_controller *ctrl)
+{
+	if (!ctrl)
+		return;
+
+	device_for_each_child(&ctrl->dev, NULL, spmi_ctrl_remove_device);
+	device_del(&ctrl->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_controller_remove);
+
+/**
+ * __spmi_driver_register() - Register client driver with SPMI core
+ * @sdrv:	client driver to be associated with client-device.
+ * @owner:	module owner
+ *
+ * This API will register the client driver with the SPMI framework.
+ * It is typically called from the driver's module-init function.
+ */
+int __spmi_driver_register(struct spmi_driver *sdrv, struct module *owner)
+{
+	sdrv->driver.bus = &spmi_bus_type;
+	sdrv->driver.owner = owner;
+	return driver_register(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(__spmi_driver_register);
+
+static void __exit spmi_exit(void)
+{
+	bus_unregister(&spmi_bus_type);
+}
+module_exit(spmi_exit);
+
+static int __init spmi_init(void)
+{
+	int ret;
+
+	ret = bus_register(&spmi_bus_type);
+	if (ret)
+		return ret;
+
+	is_registered = true;
+	return 0;
+}
+postcore_initcall(spmi_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SPMI module");
+MODULE_ALIAS("platform:spmi");