virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 384 insertions, 0 deletions

diff --git a/drivers/soundwire/debugfs.c b/drivers/soundwire/debugfs.c
new file mode 100644
index 000000000..099eb84a5
--- /dev/null
+++ b/drivers/soundwire/debugfs.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright(c) 2017-2019 Intel Corporation.
+
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/firmware.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/string_choices.h>
+#include "bus.h"
+
+static struct dentry *sdw_debugfs_root;
+
+void sdw_bus_debugfs_init(struct sdw_bus *bus)
+{
+	char name[16];
+
+	if (!sdw_debugfs_root)
+		return;
+
+	/* create the debugfs master-N */
+	snprintf(name, sizeof(name), "master-%d-%d", bus->controller_id, bus->link_id);
+	bus->debugfs = debugfs_create_dir(name, sdw_debugfs_root);
+}
+
+void sdw_bus_debugfs_exit(struct sdw_bus *bus)
+{
+	debugfs_remove_recursive(bus->debugfs);
+}
+
+#define RD_BUF (3 * PAGE_SIZE)
+
+static ssize_t sdw_sprintf(struct sdw_slave *slave,
+			   char *buf, size_t pos, unsigned int reg)
+{
+	int value;
+
+	value = sdw_read_no_pm(slave, reg);
+
+	if (value < 0)
+		return scnprintf(buf + pos, RD_BUF - pos, "%3x\tXX\n", reg);
+	else
+		return scnprintf(buf + pos, RD_BUF - pos,
+				"%3x\t%2x\n", reg, value);
+}
+
+static int sdw_slave_reg_show(struct seq_file *s_file, void *data)
+{
+	struct sdw_slave *slave = s_file->private;
+	ssize_t ret;
+	int i, j;
+
+	char *buf __free(kfree) = kzalloc(RD_BUF, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = pm_runtime_get_sync(&slave->dev);
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_noidle(&slave->dev);
+		return ret;
+	}
+
+	ret = scnprintf(buf, RD_BUF, "Register  Value\n");
+
+	/* DP0 non-banked registers */
+	ret += scnprintf(buf + ret, RD_BUF - ret, "\nDP0\n");
+	for (i = SDW_DP0_INT; i <= SDW_DP0_PREPARECTRL; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+
+	/* DP0 Bank 0 registers */
+	ret += scnprintf(buf + ret, RD_BUF - ret, "Bank0\n");
+	ret += sdw_sprintf(slave, buf, ret, SDW_DP0_CHANNELEN);
+	for (i = SDW_DP0_SAMPLECTRL1; i <= SDW_DP0_LANECTRL; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+
+	/* DP0 Bank 1 registers */
+	ret += scnprintf(buf + ret, RD_BUF - ret, "Bank1\n");
+	ret += sdw_sprintf(slave, buf, ret,
+			SDW_DP0_CHANNELEN + SDW_BANK1_OFFSET);
+	for (i = SDW_DP0_SAMPLECTRL1 + SDW_BANK1_OFFSET;
+			i <= SDW_DP0_LANECTRL + SDW_BANK1_OFFSET; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+
+	/* SCP registers */
+	ret += scnprintf(buf + ret, RD_BUF - ret, "\nSCP\n");
+	for (i = SDW_SCP_INT1; i <= SDW_SCP_BUS_CLOCK_BASE; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+	for (i = SDW_SCP_DEVID_0; i <= SDW_SCP_DEVID_5; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+	for (i = SDW_SCP_SDCA_INT1; i <= SDW_SCP_SDCA_INTMASK4; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+	for (i = SDW_SCP_FRAMECTRL_B0; i <= SDW_SCP_BUSCLOCK_SCALE_B0; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+	for (i = SDW_SCP_FRAMECTRL_B1; i <= SDW_SCP_BUSCLOCK_SCALE_B1; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+	for (i = SDW_SCP_PHY_OUT_CTRL_0; i <= SDW_SCP_PHY_OUT_CTRL_7; i++)
+		ret += sdw_sprintf(slave, buf, ret, i);
+
+
+	/*
+	 * SCP Bank 0/1 registers are read-only and cannot be
+	 * retrieved from the Slave. The Master typically keeps track
+	 * of the current frame size so the information can be found
+	 * in other places
+	 */
+
+	/* DP1..14 registers */
+	for (i = 1; SDW_VALID_PORT_RANGE(i); i++) {
+
+		/* DPi registers */
+		ret += scnprintf(buf + ret, RD_BUF - ret, "\nDP%d\n", i);
+		for (j = SDW_DPN_INT(i); j <= SDW_DPN_PREPARECTRL(i); j++)
+			ret += sdw_sprintf(slave, buf, ret, j);
+
+		/* DPi Bank0 registers */
+		ret += scnprintf(buf + ret, RD_BUF - ret, "Bank0\n");
+		for (j = SDW_DPN_CHANNELEN_B0(i);
+		     j <= SDW_DPN_LANECTRL_B0(i); j++)
+			ret += sdw_sprintf(slave, buf, ret, j);
+
+		/* DPi Bank1 registers */
+		ret += scnprintf(buf + ret, RD_BUF - ret, "Bank1\n");
+		for (j = SDW_DPN_CHANNELEN_B1(i);
+		     j <= SDW_DPN_LANECTRL_B1(i); j++)
+			ret += sdw_sprintf(slave, buf, ret, j);
+	}
+
+	seq_printf(s_file, "%s", buf);
+
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put(&slave->dev);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(sdw_slave_reg);
+
+#define MAX_CMD_BYTES (1024 * 1024)
+
+static int cmd;
+static int cmd_type;
+static u32 start_addr;
+static size_t num_bytes;
+static u8 read_buffer[MAX_CMD_BYTES];
+static char *firmware_file;
+
+static int set_command(void *data, u64 value)
+{
+	struct sdw_slave *slave = data;
+
+	if (value > 1)
+		return -EINVAL;
+
+	/* Userspace changed the hardware state behind the kernel's back */
+	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+	dev_dbg(&slave->dev, "command: %s\n", str_read_write(value));
+	cmd = value;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(set_command_fops, NULL,
+			 set_command, "%llu\n");
+
+static int set_command_type(void *data, u64 value)
+{
+	struct sdw_slave *slave = data;
+
+	if (value > 1)
+		return -EINVAL;
+
+	/* Userspace changed the hardware state behind the kernel's back */
+	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+	dev_dbg(&slave->dev, "command type: %s\n", value ? "BRA" : "Column0");
+
+	cmd_type = (int)value;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(set_command_type_fops, NULL,
+			 set_command_type, "%llu\n");
+
+static int set_start_address(void *data, u64 value)
+{
+	struct sdw_slave *slave = data;
+
+	/* Userspace changed the hardware state behind the kernel's back */
+	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+	dev_dbg(&slave->dev, "start address %#llx\n", value);
+
+	start_addr = value;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(set_start_address_fops, NULL,
+			 set_start_address, "%llu\n");
+
+static int set_num_bytes(void *data, u64 value)
+{
+	struct sdw_slave *slave = data;
+
+	if (value == 0 || value > MAX_CMD_BYTES)
+		return -EINVAL;
+
+	/* Userspace changed the hardware state behind the kernel's back */
+	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+	dev_dbg(&slave->dev, "number of bytes %lld\n", value);
+
+	num_bytes = value;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(set_num_bytes_fops, NULL,
+			 set_num_bytes, "%llu\n");
+
+static int do_bpt_sequence(struct sdw_slave *slave, bool write, u8 *buffer)
+{
+	struct sdw_bpt_msg msg = {0};
+	struct sdw_bpt_section *sec;
+
+	sec = kzalloc_objs(*sec, 1);
+	if (!sec)
+		return -ENOMEM;
+	msg.sections = 1;
+
+	sec[0].addr = start_addr;
+	sec[0].len = num_bytes;
+
+	msg.sec = sec;
+	msg.dev_num = slave->dev_num;
+	if (write)
+		msg.flags = SDW_MSG_FLAG_WRITE;
+	else
+		msg.flags = SDW_MSG_FLAG_READ;
+	sec[0].buf = buffer;
+
+	return sdw_bpt_send_sync(slave->bus, slave, &msg);
+}
+
+static int cmd_go(void *data, u64 value)
+{
+	const struct firmware *fw = NULL;
+	struct sdw_slave *slave = data;
+	ktime_t start_t;
+	ktime_t finish_t;
+	int ret;
+
+	if (value != 1)
+		return -EINVAL;
+
+	/* one last check */
+	if (start_addr > SDW_REG_MAX ||
+	    num_bytes == 0 || num_bytes > MAX_CMD_BYTES)
+		return -EINVAL;
+
+	ret = pm_runtime_get_sync(&slave->dev);
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_noidle(&slave->dev);
+		return ret;
+	}
+
+	if (cmd == 0) {
+		ret = request_firmware(&fw, firmware_file, &slave->dev);
+		if (ret < 0) {
+			dev_err(&slave->dev, "firmware %s not found\n", firmware_file);
+			goto out;
+		}
+		if (fw->size < num_bytes) {
+			dev_err(&slave->dev,
+				"firmware %s: firmware size %zd, desired %zd\n",
+				firmware_file, fw->size, num_bytes);
+			goto out;
+		}
+	}
+
+	/* Userspace changed the hardware state behind the kernel's back */
+	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+	dev_dbg(&slave->dev, "starting command\n");
+	start_t = ktime_get();
+
+	if (cmd == 0) {
+		if (cmd_type)
+			ret = do_bpt_sequence(slave, true, (u8 *)fw->data);
+		else
+			ret = sdw_nwrite_no_pm(slave, start_addr, num_bytes, fw->data);
+	} else {
+		memset(read_buffer, 0, sizeof(read_buffer));
+
+		if (cmd_type)
+			ret = do_bpt_sequence(slave, false, read_buffer);
+		else
+			ret = sdw_nread_no_pm(slave, start_addr, num_bytes, read_buffer);
+	}
+
+	finish_t = ktime_get();
+
+	dev_dbg(&slave->dev, "command completed, num_byte %zu status %d, time %lld ms\n",
+		num_bytes, ret, div_u64(finish_t - start_t, NSEC_PER_MSEC));
+
+out:
+	if (fw)
+		release_firmware(fw);
+
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put(&slave->dev);
+
+	return ret;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(cmd_go_fops, NULL,
+			 cmd_go, "%llu\n");
+
+#define MAX_LINE_LEN 128
+
+static int read_buffer_show(struct seq_file *s_file, void *data)
+{
+	char buf[MAX_LINE_LEN];
+	int i;
+
+	if (num_bytes == 0 || num_bytes > MAX_CMD_BYTES)
+		return -EINVAL;
+
+	for (i = 0; i < num_bytes; i++) {
+		scnprintf(buf, MAX_LINE_LEN, "address %#x val 0x%02x\n",
+			  start_addr + i, read_buffer[i]);
+		seq_printf(s_file, "%s", buf);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(read_buffer);
+
+void sdw_slave_debugfs_init(struct sdw_slave *slave)
+{
+	struct dentry *master;
+	struct dentry *d;
+	char name[32];
+
+	master = slave->bus->debugfs;
+
+	/* create the debugfs slave-name */
+	snprintf(name, sizeof(name), "%s", dev_name(&slave->dev));
+	d = debugfs_create_dir(name, master);
+
+	debugfs_create_file("registers", 0400, d, slave, &sdw_slave_reg_fops);
+
+	/* interface to send arbitrary commands */
+	debugfs_create_file("command", 0200, d, slave, &set_command_fops);
+	debugfs_create_file("command_type", 0200, d, slave, &set_command_type_fops);
+	debugfs_create_file("start_address", 0200, d, slave, &set_start_address_fops);
+	debugfs_create_file("num_bytes", 0200, d, slave, &set_num_bytes_fops);
+	debugfs_create_file("go", 0200, d, slave, &cmd_go_fops);
+
+	debugfs_create_file("read_buffer", 0400, d, slave, &read_buffer_fops);
+	if (firmware_file)
+		debugfs_create_str("firmware_file", 0200, d, &firmware_file);
+
+	slave->debugfs = d;
+}
+
+void sdw_slave_debugfs_exit(struct sdw_slave *slave)
+{
+	debugfs_remove_recursive(slave->debugfs);
+}
+
+void sdw_debugfs_init(void)
+{
+	if (!firmware_file)
+		firmware_file = kstrdup("", GFP_KERNEL);
+
+	sdw_debugfs_root = debugfs_create_dir("soundwire", NULL);
+}
+
+void sdw_debugfs_exit(void)
+{
+	debugfs_remove_recursive(sdw_debugfs_root);
+	kfree(firmware_file);
+	firmware_file = NULL;
+}