KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 91 insertions, 0 deletions

diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
new file mode 100644
index 000000000..163aadd58
--- /dev/null
+++ b/drivers/soc/ti/Kconfig
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# TI SOC drivers
+#
+menuconfig SOC_TI
+	bool "TI SOC drivers support"
+
+if SOC_TI
+
+config KEYSTONE_NAVIGATOR_QMSS
+	tristate "Keystone Queue Manager Sub System"
+	depends on ARCH_KEYSTONE
+	help
+	  Say y here to support the Keystone multicore Navigator Queue
+	  Manager support. The Queue Manager is a hardware module that
+	  is responsible for accelerating management of the packet queues.
+	  Packets are queued/de-queued by writing/reading descriptor address
+	  to a particular memory mapped location in the Queue Manager module.
+
+	  If unsure, say N.
+
+config KEYSTONE_NAVIGATOR_DMA
+	tristate "TI Keystone Navigator Packet DMA support"
+	depends on ARCH_KEYSTONE
+	help
+	  Say y tp enable support for the Keystone Navigator Packet DMA on
+	  on Keystone family of devices. It sets up the dma channels for the
+	  Queue Manager Sub System.
+
+	  If unsure, say N.
+
+config AMX3_PM
+	tristate "AMx3 Power Management"
+	depends on SOC_AM33XX || SOC_AM43XX
+	depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP
+	help
+	  Enable power management on AM335x and AM437x. Required for suspend to mem
+	  and standby states on both AM335x and AM437x platforms and for deeper cpuidle
+	  c-states on AM335x. Also required for rtc and ddr in self-refresh low
+	  power mode on AM437x platforms.
+
+config WKUP_M3_IPC
+	tristate "TI AMx3 Wkup-M3 IPC Driver"
+	depends on WKUP_M3_RPROC
+	depends on OMAP2PLUS_MBOX
+	help
+	  TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle
+	  low power transitions. This IPC driver provides the necessary API
+	  to communicate and use the Wakeup M3 for PM features like suspend
+	  resume and boots it using wkup_m3_rproc driver.
+
+config TI_K3_RINGACC
+	tristate "K3 Ring accelerator Sub System"
+	depends on ARCH_K3 || COMPILE_TEST
+	depends on TI_SCI_INTA_IRQCHIP
+	help
+	  Say y here to support the K3 Ring accelerator module.
+	  The Ring Accelerator (RINGACC or RA)  provides hardware acceleration
+	  to enable straightforward passing of work between a producer
+	  and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
+	  If unsure, say N.
+
+config TI_K3_SOCINFO
+	bool "K3 SoC Information driver" if COMPILE_TEST
+	depends on ARCH_K3 || COMPILE_TEST
+	select SOC_BUS
+	select MFD_SYSCON
+	help
+	  Include support for the SoC bus socinfo for the TI K3 Multicore SoC
+	  platforms to provide information about the SoC family and
+	  variant to user space.
+
+config TI_PRUSS
+	tristate "TI PRU-ICSS Subsystem Platform drivers"
+	depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  TI PRU-ICSS Subsystem platform specific support.
+
+	  Say Y or M here to support the Programmable Realtime Unit (PRU)
+	  processors on various TI SoCs. It's safe to say N here if you're
+	  not interested in the PRU or if you are unsure.
+
+endif # SOC_TI
+
+config TI_SCI_INTA_MSI_DOMAIN
+	bool
+	select GENERIC_MSI_IRQ
+	help
+	  Driver to enable Interrupt Aggregator specific MSI Domain.