drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/soc/tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c
new file mode 100644
index 000000000..221202db3
--- /dev/null
+++ b/drivers/soc/tegra/flowctrl.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/soc/tegra/flowctrl.c
+ *
+ * Functions and macros to control the flowcontroller
+ *
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include <soc/tegra/common.h>
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+
+static u8 flowctrl_offset_halt_cpu[] = {
+	FLOW_CTRL_HALT_CPU0_EVENTS,
+	FLOW_CTRL_HALT_CPU1_EVENTS,
+	FLOW_CTRL_HALT_CPU1_EVENTS + 8,
+	FLOW_CTRL_HALT_CPU1_EVENTS + 16,
+};
+
+static u8 flowctrl_offset_cpu_csr[] = {
+	FLOW_CTRL_CPU0_CSR,
+	FLOW_CTRL_CPU1_CSR,
+	FLOW_CTRL_CPU1_CSR + 8,
+	FLOW_CTRL_CPU1_CSR + 16,
+};
+
+static void __iomem *tegra_flowctrl_base;
+
+static void flowctrl_update(u8 offset, u32 value)
+{
+	if (WARN_ONCE(IS_ERR_OR_NULL(tegra_flowctrl_base),
+		      "Tegra flowctrl not initialised!\n"))
+		return;
+
+	writel(value, tegra_flowctrl_base + offset);
+
+	/* ensure the update has reached the flow controller */
+	wmb();
+	readl_relaxed(tegra_flowctrl_base + offset);
+}
+
+u32 flowctrl_read_cpu_csr(unsigned int cpuid)
+{
+	u8 offset = flowctrl_offset_cpu_csr[cpuid];
+
+	if (WARN_ONCE(IS_ERR_OR_NULL(tegra_flowctrl_base),
+		      "Tegra flowctrl not initialised!\n"))
+		return 0;
+
+	return readl(tegra_flowctrl_base + offset);
+}
+
+void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
+{
+	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
+}
+
+void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
+{
+	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
+}
+
+void flowctrl_cpu_suspend_enter(unsigned int cpuid)
+{
+	unsigned int reg;
+	int i;
+
+	reg = flowctrl_read_cpu_csr(cpuid);
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+		/* clear wfe bitmap */
+		reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
+		/* clear wfi bitmap */
+		reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
+		/* pwr gating on wfe */
+		reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		/* clear wfe bitmap */
+		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
+		/* clear wfi bitmap */
+		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
+
+		if (tegra_get_chip_id() == TEGRA30) {
+			/*
+			 * The wfi doesn't work well on Tegra30 because
+			 * CPU hangs under some odd circumstances after
+			 * power-gating (like memory running off PLLP),
+			 * hence use wfe that is working perfectly fine.
+			 * Note that Tegra30 TRM doc clearly stands that
+			 * wfi should be used for the "Cluster Switching",
+			 * while wfe for the power-gating, just like it
+			 * is done on Tegra20.
+			 */
+			reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
+		} else {
+			/* pwr gating on wfi */
+			reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+		}
+		break;
+	}
+	reg |= FLOW_CTRL_CSR_INTR_FLAG;			/* clear intr flag */
+	reg |= FLOW_CTRL_CSR_EVENT_FLAG;		/* clear event flag */
+	reg |= FLOW_CTRL_CSR_ENABLE;			/* pwr gating */
+	flowctrl_write_cpu_csr(cpuid, reg);
+
+	for (i = 0; i < num_possible_cpus(); i++) {
+		if (i == cpuid)
+			continue;
+		reg = flowctrl_read_cpu_csr(i);
+		reg |= FLOW_CTRL_CSR_EVENT_FLAG;
+		reg |= FLOW_CTRL_CSR_INTR_FLAG;
+		flowctrl_write_cpu_csr(i, reg);
+	}
+}
+
+void flowctrl_cpu_suspend_exit(unsigned int cpuid)
+{
+	unsigned int reg;
+
+	/* Disable powergating via flow controller for CPU0 */
+	reg = flowctrl_read_cpu_csr(cpuid);
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+		/* clear wfe bitmap */
+		reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
+		/* clear wfi bitmap */
+		reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		/* clear wfe bitmap */
+		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
+		/* clear wfi bitmap */
+		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
+		break;
+	}
+	reg &= ~FLOW_CTRL_CSR_ENABLE;			/* clear enable */
+	reg |= FLOW_CTRL_CSR_INTR_FLAG;			/* clear intr */
+	reg |= FLOW_CTRL_CSR_EVENT_FLAG;		/* clear event */
+	flowctrl_write_cpu_csr(cpuid, reg);
+}
+
+static int tegra_flowctrl_probe(struct platform_device *pdev)
+{
+	void __iomem *base = tegra_flowctrl_base;
+
+	tegra_flowctrl_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(tegra_flowctrl_base))
+		return PTR_ERR(tegra_flowctrl_base);
+
+	iounmap(base);
+
+	return 0;
+}
+
+static const struct of_device_id tegra_flowctrl_match[] = {
+	{ .compatible = "nvidia,tegra210-flowctrl" },
+	{ .compatible = "nvidia,tegra124-flowctrl" },
+	{ .compatible = "nvidia,tegra114-flowctrl" },
+	{ .compatible = "nvidia,tegra30-flowctrl" },
+	{ .compatible = "nvidia,tegra20-flowctrl" },
+	{ }
+};
+
+static struct platform_driver tegra_flowctrl_driver = {
+	.driver = {
+		.name = "tegra-flowctrl",
+		.suppress_bind_attrs = true,
+		.of_match_table = tegra_flowctrl_match,
+	},
+	.probe = tegra_flowctrl_probe,
+};
+builtin_platform_driver(tegra_flowctrl_driver);
+
+static int __init tegra_flowctrl_init(void)
+{
+	struct resource res;
+	struct device_node *np;
+
+	if (!soc_is_tegra())
+		return 0;
+
+	np = of_find_matching_node(NULL, tegra_flowctrl_match);
+	if (np) {
+		if (of_address_to_resource(np, 0, &res) < 0) {
+			pr_err("failed to get flowctrl register\n");
+			return -ENXIO;
+		}
+		of_node_put(np);
+	} else if (IS_ENABLED(CONFIG_ARM)) {
+		/*
+		 * Hardcoded fallback for 32-bit Tegra
+		 * devices if device tree node is missing.
+		 */
+		res.start = 0x60007000;
+		res.end = 0x60007fff;
+		res.flags = IORESOURCE_MEM;
+	} else {
+		/*
+		 * At this point we're running on a Tegra,
+		 * that doesn't support the flow controller
+		 * (eg. Tegra186), so just return.
+		 */
+		return 0;
+	}
+
+	tegra_flowctrl_base = ioremap(res.start, resource_size(&res));
+	if (!tegra_flowctrl_base)
+		return -ENXIO;
+
+	return 0;
+}
+early_initcall(tegra_flowctrl_init);