Merge tag 'locking-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipgrafted

Pull futex fix from Ingo Molnar:

 - Also allocate a default private futex hash on vfork() as well, to
   avoid races with (private) futex waiters (Peter Zijlstra)

* tag 'locking-urgent-2026-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Also allocate private hash on vfork()

1 files changed, 576 insertions, 0 deletions

diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
new file mode 100644
index 000000000..f75659fff
--- /dev/null
+++ b/drivers/soc/qcom/spm.c
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014,2015, Linaro Ltd.
+ *
+ * SAW power controller driver
+ */
+
+#include <linux/bitfield.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+
+#include <linux/regulator/driver.h>
+
+#include <soc/qcom/spm.h>
+
+#define FIELD_SET(current, mask, val)	\
+	(((current) & ~(mask)) | FIELD_PREP((mask), (val)))
+
+#define SPM_CTL_INDEX		0x7f
+#define SPM_CTL_INDEX_SHIFT	4
+#define SPM_CTL_EN		BIT(0)
+
+/* These registers might be specific to SPM 1.1 */
+#define SPM_VCTL_VLVL			GENMASK(7, 0)
+#define SPM_PMIC_DATA_0_VLVL		GENMASK(7, 0)
+#define SPM_PMIC_DATA_1_MIN_VSEL	GENMASK(5, 0)
+#define SPM_PMIC_DATA_1_MAX_VSEL	GENMASK(21, 16)
+
+#define SPM_1_1_AVS_CTL_AVS_ENABLED	BIT(27)
+#define SPM_AVS_CTL_MAX_VLVL		GENMASK(22, 17)
+#define SPM_AVS_CTL_MIN_VLVL		GENMASK(15, 10)
+
+enum spm_reg {
+	SPM_REG_CFG,
+	SPM_REG_SPM_CTL,
+	SPM_REG_DLY,
+	SPM_REG_PMIC_DLY,
+	SPM_REG_PMIC_DATA_0,
+	SPM_REG_PMIC_DATA_1,
+	SPM_REG_VCTL,
+	SPM_REG_SEQ_ENTRY,
+	SPM_REG_STS0,
+	SPM_REG_STS1,
+	SPM_REG_PMIC_STS,
+	SPM_REG_AVS_CTL,
+	SPM_REG_AVS_LIMIT,
+	SPM_REG_RST,
+	SPM_REG_NR,
+};
+
+#define MAX_PMIC_DATA		2
+#define MAX_SEQ_DATA		64
+
+struct spm_reg_data {
+	const u16 *reg_offset;
+	u32 spm_cfg;
+	u32 spm_dly;
+	u32 pmic_dly;
+	u32 pmic_data[MAX_PMIC_DATA];
+	u32 avs_ctl;
+	u32 avs_limit;
+	u8 seq[MAX_SEQ_DATA];
+	u8 start_index[PM_SLEEP_MODE_NR];
+
+	smp_call_func_t set_vdd;
+	/* for now we support only a single range */
+	struct linear_range *range;
+	unsigned int ramp_delay;
+	unsigned int init_uV;
+};
+
+struct spm_driver_data {
+	void __iomem *reg_base;
+	const struct spm_reg_data *reg_data;
+	struct device *dev;
+	unsigned int volt_sel;
+	int reg_cpu;
+};
+
+static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = {
+	[SPM_REG_AVS_CTL]	= 0x904,
+	[SPM_REG_AVS_LIMIT]	= 0x908,
+};
+
+static const struct spm_reg_data spm_reg_660_gold_l2  = {
+	.reg_offset = spm_reg_offset_v4_1,
+	.avs_ctl = 0x1010031,
+	.avs_limit = 0x4580458,
+};
+
+static const struct spm_reg_data spm_reg_660_silver_l2  = {
+	.reg_offset = spm_reg_offset_v4_1,
+	.avs_ctl = 0x101c031,
+	.avs_limit = 0x4580458,
+};
+
+static const struct spm_reg_data spm_reg_8998_gold_l2  = {
+	.reg_offset = spm_reg_offset_v4_1,
+	.avs_ctl = 0x1010031,
+	.avs_limit = 0x4700470,
+};
+
+static const struct spm_reg_data spm_reg_8998_silver_l2  = {
+	.reg_offset = spm_reg_offset_v4_1,
+	.avs_ctl = 0x1010031,
+	.avs_limit = 0x4200420,
+};
+
+static const u16 spm_reg_offset_v3_0[SPM_REG_NR] = {
+	[SPM_REG_CFG]		= 0x08,
+	[SPM_REG_SPM_CTL]	= 0x30,
+	[SPM_REG_DLY]		= 0x34,
+	[SPM_REG_SEQ_ENTRY]	= 0x400,
+};
+
+/* SPM register data for 8909 */
+static const struct spm_reg_data spm_reg_8909_cpu = {
+	.reg_offset = spm_reg_offset_v3_0,
+	.spm_cfg = 0x1,
+	.spm_dly = 0x3C102800,
+	.seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90,
+		0x5B, 0x60, 0x03, 0x60, 0x76, 0x76, 0x0B, 0x94, 0x5B, 0x80,
+		0x10, 0x26, 0x30, 0x0F },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 5,
+};
+
+/* SPM register data for 8916 */
+static const struct spm_reg_data spm_reg_8916_cpu = {
+	.reg_offset = spm_reg_offset_v3_0,
+	.spm_cfg = 0x1,
+	.spm_dly = 0x3C102800,
+	.seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90,
+		0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B,
+		0x80, 0x10, 0x26, 0x30, 0x0F },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 5,
+};
+
+static const struct spm_reg_data spm_reg_8939_cpu = {
+	.reg_offset = spm_reg_offset_v3_0,
+	.spm_cfg = 0x1,
+	.spm_dly = 0x3C102800,
+	.seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x50, 0x1B, 0x10, 0x80,
+		0x30, 0x90, 0x5B, 0x60, 0x50, 0x03, 0x60, 0x76, 0x76, 0x0B,
+		0x50, 0x1B, 0x94, 0x5B, 0x80, 0x10, 0x26, 0x30, 0x50, 0x0F },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 5,
+};
+
+static const u16 spm_reg_offset_v2_3[SPM_REG_NR] = {
+	[SPM_REG_CFG]		= 0x08,
+	[SPM_REG_SPM_CTL]	= 0x30,
+	[SPM_REG_DLY]		= 0x34,
+	[SPM_REG_PMIC_DATA_0]	= 0x40,
+	[SPM_REG_PMIC_DATA_1]	= 0x44,
+};
+
+/* SPM register data for 8976 */
+static const struct spm_reg_data spm_reg_8976_gold_l2 = {
+	.reg_offset = spm_reg_offset_v2_3,
+	.spm_cfg = 0x14,
+	.spm_dly = 0x3c11840a,
+	.pmic_data[0] = 0x03030080,
+	.pmic_data[1] = 0x00030000,
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 3,
+};
+
+static const struct spm_reg_data spm_reg_8976_silver_l2 = {
+	.reg_offset = spm_reg_offset_v2_3,
+	.spm_cfg = 0x14,
+	.spm_dly = 0x3c102800,
+	.pmic_data[0] = 0x03030080,
+	.pmic_data[1] = 0x00030000,
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 2,
+};
+
+static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = {
+	[SPM_REG_CFG]		= 0x08,
+	[SPM_REG_SPM_CTL]	= 0x30,
+	[SPM_REG_DLY]		= 0x34,
+	[SPM_REG_SEQ_ENTRY]	= 0x80,
+};
+
+/* SPM register data for 8974, 8084 */
+static const struct spm_reg_data spm_reg_8974_8084_cpu  = {
+	.reg_offset = spm_reg_offset_v2_1,
+	.spm_cfg = 0x1,
+	.spm_dly = 0x3C102800,
+	.seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
+		0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
+		0x0F },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 3,
+};
+
+/* SPM register data for 8226 */
+static const struct spm_reg_data spm_reg_8226_cpu  = {
+	.reg_offset = spm_reg_offset_v2_1,
+	.spm_cfg = 0x0,
+	.spm_dly = 0x3C102800,
+	.seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90,
+		0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B,
+		0x80, 0x10, 0x26, 0x30, 0x0F },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 5,
+};
+
+static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = {
+	[SPM_REG_CFG]		= 0x08,
+	[SPM_REG_STS0]		= 0x0c,
+	[SPM_REG_STS1]		= 0x10,
+	[SPM_REG_VCTL]		= 0x14,
+	[SPM_REG_AVS_CTL]	= 0x18,
+	[SPM_REG_SPM_CTL]	= 0x20,
+	[SPM_REG_PMIC_DLY]	= 0x24,
+	[SPM_REG_PMIC_DATA_0]	= 0x28,
+	[SPM_REG_PMIC_DATA_1]	= 0x2C,
+	[SPM_REG_SEQ_ENTRY]	= 0x80,
+};
+
+static void smp_set_vdd_v1_1(void *data);
+
+/* SPM register data for 8064 */
+static struct linear_range spm_v1_1_regulator_range =
+	REGULATOR_LINEAR_RANGE(700000, 0, 56, 12500);
+
+static const struct spm_reg_data spm_reg_8064_cpu = {
+	.reg_offset = spm_reg_offset_v1_1,
+	.spm_cfg = 0x1F,
+	.pmic_dly = 0x02020004,
+	.pmic_data[0] = 0x0084009C,
+	.pmic_data[1] = 0x00A4001C,
+	.seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
+		0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 2,
+	.set_vdd = smp_set_vdd_v1_1,
+	.range = &spm_v1_1_regulator_range,
+	.init_uV = 1300000,
+	.ramp_delay = 1250,
+};
+
+static inline void spm_register_write(struct spm_driver_data *drv,
+					enum spm_reg reg, u32 val)
+{
+	if (drv->reg_data->reg_offset[reg])
+		writel_relaxed(val, drv->reg_base +
+				drv->reg_data->reg_offset[reg]);
+}
+
+/* Ensure a guaranteed write, before return */
+static inline void spm_register_write_sync(struct spm_driver_data *drv,
+					enum spm_reg reg, u32 val)
+{
+	u32 ret;
+
+	if (!drv->reg_data->reg_offset[reg])
+		return;
+
+	do {
+		writel_relaxed(val, drv->reg_base +
+				drv->reg_data->reg_offset[reg]);
+		ret = readl_relaxed(drv->reg_base +
+				drv->reg_data->reg_offset[reg]);
+		if (ret == val)
+			break;
+		cpu_relax();
+	} while (1);
+}
+
+static inline u32 spm_register_read(struct spm_driver_data *drv,
+				    enum spm_reg reg)
+{
+	return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
+}
+
+void spm_set_low_power_mode(struct spm_driver_data *drv,
+			    enum pm_sleep_mode mode)
+{
+	u32 start_index;
+	u32 ctl_val;
+
+	start_index = drv->reg_data->start_index[mode];
+
+	ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
+	ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
+	ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
+	ctl_val |= SPM_CTL_EN;
+	spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
+}
+
+static int spm_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector)
+{
+	struct spm_driver_data *drv = rdev_get_drvdata(rdev);
+
+	drv->volt_sel = selector;
+
+	/* Always do the SAW register writes on the corresponding CPU */
+	return smp_call_function_single(drv->reg_cpu, drv->reg_data->set_vdd, drv, true);
+}
+
+static int spm_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct spm_driver_data *drv = rdev_get_drvdata(rdev);
+
+	return drv->volt_sel;
+}
+
+static const struct regulator_ops spm_reg_ops = {
+	.set_voltage_sel	= spm_set_voltage_sel,
+	.get_voltage_sel	= spm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+};
+
+static void smp_set_vdd_v1_1(void *data)
+{
+	struct spm_driver_data *drv = data;
+	unsigned int vctl, data0, data1, avs_ctl, sts;
+	unsigned int vlevel, volt_sel;
+	bool avs_enabled;
+
+	volt_sel = drv->volt_sel;
+	vlevel = volt_sel | 0x80; /* band */
+
+	avs_ctl = spm_register_read(drv, SPM_REG_AVS_CTL);
+	vctl = spm_register_read(drv, SPM_REG_VCTL);
+	data0 = spm_register_read(drv, SPM_REG_PMIC_DATA_0);
+	data1 = spm_register_read(drv, SPM_REG_PMIC_DATA_1);
+
+	avs_enabled = avs_ctl & SPM_1_1_AVS_CTL_AVS_ENABLED;
+
+	/* If AVS is enabled, switch it off during the voltage change */
+	if (avs_enabled) {
+		avs_ctl &= ~SPM_1_1_AVS_CTL_AVS_ENABLED;
+		spm_register_write(drv, SPM_REG_AVS_CTL, avs_ctl);
+	}
+
+	/* Kick the state machine back to idle */
+	spm_register_write(drv, SPM_REG_RST, 1);
+
+	vctl = FIELD_SET(vctl, SPM_VCTL_VLVL, vlevel);
+	data0 = FIELD_SET(data0, SPM_PMIC_DATA_0_VLVL, vlevel);
+	data1 = FIELD_SET(data1, SPM_PMIC_DATA_1_MIN_VSEL, volt_sel);
+	data1 = FIELD_SET(data1, SPM_PMIC_DATA_1_MAX_VSEL, volt_sel);
+
+	spm_register_write(drv, SPM_REG_VCTL, vctl);
+	spm_register_write(drv, SPM_REG_PMIC_DATA_0, data0);
+	spm_register_write(drv, SPM_REG_PMIC_DATA_1, data1);
+
+	if (read_poll_timeout_atomic(spm_register_read,
+				     sts, sts == vlevel,
+				     1, 200, false,
+				     drv, SPM_REG_STS1)) {
+		dev_err_ratelimited(drv->dev, "timeout setting the voltage (%x %x)!\n", sts, vlevel);
+		goto enable_avs;
+	}
+
+	if (avs_enabled) {
+		unsigned int max_avs = volt_sel;
+		unsigned int min_avs = max(max_avs, 4U) - 4;
+
+		avs_ctl = FIELD_SET(avs_ctl, SPM_AVS_CTL_MIN_VLVL, min_avs);
+		avs_ctl = FIELD_SET(avs_ctl, SPM_AVS_CTL_MAX_VLVL, max_avs);
+		spm_register_write(drv, SPM_REG_AVS_CTL, avs_ctl);
+	}
+
+enable_avs:
+	if (avs_enabled) {
+		avs_ctl |= SPM_1_1_AVS_CTL_AVS_ENABLED;
+		spm_register_write(drv, SPM_REG_AVS_CTL, avs_ctl);
+	}
+}
+
+static int spm_get_cpu(struct device *dev)
+{
+	int cpu;
+	bool found;
+
+	for_each_possible_cpu(cpu) {
+		struct device_node *cpu_node, *saw_node;
+
+		cpu_node = of_cpu_device_node_get(cpu);
+		if (!cpu_node)
+			continue;
+
+		saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+		found = (saw_node == dev->of_node);
+		of_node_put(saw_node);
+		of_node_put(cpu_node);
+
+		if (found)
+			return cpu;
+	}
+
+	/* L2 SPM is not bound to any CPU, voltage setting is not supported */
+
+	return -EOPNOTSUPP;
+}
+
+static int spm_register_regulator(struct device *dev, struct spm_driver_data *drv)
+{
+	struct regulator_config config = {
+		.dev = dev,
+		.driver_data = drv,
+	};
+	struct regulator_desc *rdesc;
+	struct regulator_dev *rdev;
+	int ret;
+	bool found;
+
+	if (!drv->reg_data->set_vdd)
+		return 0;
+
+	rdesc = devm_kzalloc(dev, sizeof(*rdesc), GFP_KERNEL);
+	if (!rdesc)
+		return -ENOMEM;
+
+	rdesc->name = "spm";
+	rdesc->of_match = of_match_ptr("regulator");
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->owner = THIS_MODULE;
+	rdesc->ops = &spm_reg_ops;
+
+	rdesc->linear_ranges = drv->reg_data->range;
+	rdesc->n_linear_ranges = 1;
+	rdesc->n_voltages = rdesc->linear_ranges[rdesc->n_linear_ranges - 1].max_sel + 1;
+	rdesc->ramp_delay = drv->reg_data->ramp_delay;
+
+	ret = spm_get_cpu(dev);
+	if (ret < 0)
+		return ret;
+
+	drv->reg_cpu = ret;
+	dev_dbg(dev, "SAW2 bound to CPU %d\n", drv->reg_cpu);
+
+	/*
+	 * Program initial voltage, otherwise registration will also try
+	 * setting the voltage, which might result in undervolting the CPU.
+	 */
+	drv->volt_sel = DIV_ROUND_UP(drv->reg_data->init_uV - rdesc->min_uV,
+				     rdesc->uV_step);
+	ret = linear_range_get_selector_high(drv->reg_data->range,
+					     drv->reg_data->init_uV,
+					     &drv->volt_sel,
+					     &found);
+	if (ret) {
+		dev_err(dev, "Initial uV value out of bounds\n");
+		return ret;
+	}
+
+	/* Always do the SAW register writes on the corresponding CPU */
+	smp_call_function_single(drv->reg_cpu, drv->reg_data->set_vdd, drv, true);
+
+	rdev = devm_regulator_register(dev, rdesc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(dev, "failed to register regulator\n");
+		return PTR_ERR(rdev);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id spm_match_table[] = {
+	{ .compatible = "qcom,sdm660-gold-saw2-v4.1-l2",
+	  .data = &spm_reg_660_gold_l2 },
+	{ .compatible = "qcom,sdm660-silver-saw2-v4.1-l2",
+	  .data = &spm_reg_660_silver_l2 },
+	{ .compatible = "qcom,msm8226-saw2-v2.1-cpu",
+	  .data = &spm_reg_8226_cpu },
+	{ .compatible = "qcom,msm8909-saw2-v3.0-cpu",
+	  .data = &spm_reg_8909_cpu },
+	{ .compatible = "qcom,msm8916-saw2-v3.0-cpu",
+	  .data = &spm_reg_8916_cpu },
+	{ .compatible = "qcom,msm8939-saw2-v3.0-cpu",
+	  .data = &spm_reg_8939_cpu },
+	{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
+	  .data = &spm_reg_8974_8084_cpu },
+	{ .compatible = "qcom,msm8976-gold-saw2-v2.3-l2",
+	  .data = &spm_reg_8976_gold_l2 },
+	{ .compatible = "qcom,msm8976-silver-saw2-v2.3-l2",
+	  .data = &spm_reg_8976_silver_l2 },
+	{ .compatible = "qcom,msm8998-gold-saw2-v4.1-l2",
+	  .data = &spm_reg_8998_gold_l2 },
+	{ .compatible = "qcom,msm8998-silver-saw2-v4.1-l2",
+	  .data = &spm_reg_8998_silver_l2 },
+	{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
+	  .data = &spm_reg_8974_8084_cpu },
+	{ .compatible = "qcom,apq8064-saw2-v1.1-cpu",
+	  .data = &spm_reg_8064_cpu },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, spm_match_table);
+
+static int spm_dev_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match_id;
+	struct spm_driver_data *drv;
+	void __iomem *addr;
+
+	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	drv->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(drv->reg_base))
+		return PTR_ERR(drv->reg_base);
+
+	match_id = of_match_node(spm_match_table, pdev->dev.of_node);
+	if (!match_id)
+		return -ENODEV;
+
+	drv->reg_data = match_id->data;
+	drv->dev = &pdev->dev;
+	platform_set_drvdata(pdev, drv);
+
+	/* Write the SPM sequences first.. */
+	addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
+	__iowrite32_copy(addr, drv->reg_data->seq,
+			ARRAY_SIZE(drv->reg_data->seq) / 4);
+
+	/*
+	 * ..and then the control registers.
+	 * On some SoC if the control registers are written first and if the
+	 * CPU was held in reset, the reset signal could trigger the SPM state
+	 * machine, before the sequences are completely written.
+	 */
+	spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl);
+	spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit);
+	spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
+	spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
+	spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
+	spm_register_write(drv, SPM_REG_PMIC_DATA_0,
+				drv->reg_data->pmic_data[0]);
+	spm_register_write(drv, SPM_REG_PMIC_DATA_1,
+				drv->reg_data->pmic_data[1]);
+
+	/* Set up Standby as the default low power mode */
+	if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL])
+		spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+	if (IS_ENABLED(CONFIG_REGULATOR))
+		return spm_register_regulator(&pdev->dev, drv);
+
+	return 0;
+}
+
+static struct platform_driver spm_driver = {
+	.probe = spm_dev_probe,
+	.driver = {
+		.name = "qcom_spm",
+		.of_match_table = spm_match_table,
+	},
+};
+
+static int __init qcom_spm_init(void)
+{
+	return platform_driver_register(&spm_driver);
+}
+arch_initcall(qcom_spm_init);
+
+MODULE_DESCRIPTION("Qualcomm Subsystem Power Manager (SPM)");
+MODULE_LICENSE("GPL v2");