Merge tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linuxgrafted

Pull io_uring fixes from Jens Axboe:

 - Fix a task_work add use-after-free with SQPOLL.

   The sqpoll thread could pop and complete the last request while
   io_req_normal_work_add() was still looking at them after the mpscq
   push.

   Use the same approach as DEFER_TASKRUN to protect from that, holding
   an RCU read lock across the add, and have exit wait for an RCU grace
   period for SQPOLL rings as well.

 - CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
   big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
   rings

 - Mark the source filter table as COW when cloning bpf filters, so
   registering another filter on the source doesn't modify the shared
   table in place

 - Initialize the task context before running the BPF loop

 - Requeue zcrx multishot receives stopped by a local resource

 - End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)

* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  io_uring: fix task_work add use-after-free with SQPOLL
  io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
  io_uring/zcrx: requeue multishot receives stopped by a local resource
  io_uring: initialize task context before running the BPF loop
  io_uring: zero big_cqe for aux CQEs on CQE32 rings
  io_uring: fix free entry check for 32b CQEs on CQE32 rings
  io_uring: only post the dummy skip CQE on CQE_MIXED rings
  io_uring/bpf_filter: mark source as COW when cloning filters

6 files changed, 586 insertions, 0 deletions

diff --git a/drivers/soc/microchip/Kconfig b/drivers/soc/microchip/Kconfig
new file mode 100644
index 000000000..af7946741
--- /dev/null
+++ b/drivers/soc/microchip/Kconfig
@@ -0,0 +1,34 @@
+config POLARFIRE_SOC_IRQ_MUX
+	bool "Microchip PolarFire SoC's GPIO IRQ Mux"
+	depends on ARCH_MICROCHIP
+	select REGMAP
+	select REGMAP_MMIO
+	default y
+	help
+	  Support for the interrupt mux on Polarfire SoC. It sits between
+	  the GPIO controllers and the PLIC, as only 41 interrupts are shared
+	  between 3 GPIO controllers with a total of 70 interrupts.
+
+config POLARFIRE_SOC_SYS_CTRL
+	tristate "Microchip PolarFire SoC (MPFS) system controller support"
+	depends on POLARFIRE_SOC_MAILBOX
+	depends on MTD
+	help
+	  This driver adds support for the PolarFire SoC (MPFS) system controller.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called mpfs_system_controller.
+
+	  If unsure, say N.
+
+config POLARFIRE_SOC_SYSCONS
+	bool "PolarFire SoC (MPFS) syscon drivers"
+	default y
+	depends on ARCH_MICROCHIP
+	select MFD_CORE
+	help
+	  These drivers add support for the syscons on PolarFire SoC (MPFS).
+	  Without these drivers core parts of the kernel such as clocks
+	  and resets will not function correctly.
+
+	  If unsure, and on a PolarFire SoC, say y.
diff --git a/drivers/soc/microchip/Makefile b/drivers/soc/microchip/Makefile
new file mode 100644
index 000000000..55775db45
--- /dev/null
+++ b/drivers/soc/microchip/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_POLARFIRE_SOC_IRQ_MUX)	+= mpfs-irqmux.o
+obj-$(CONFIG_POLARFIRE_SOC_SYS_CTRL)	+= mpfs-sys-controller.o
+obj-$(CONFIG_POLARFIRE_SOC_SYSCONS)	+= mpfs-control-scb.o mpfs-mss-top-sysreg.o
diff --git a/drivers/soc/microchip/mpfs-control-scb.c b/drivers/soc/microchip/mpfs-control-scb.c
new file mode 100644
index 000000000..8dda5704a
--- /dev/null
+++ b/drivers/soc/microchip/mpfs-control-scb.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/array_size.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell mpfs_control_scb_devs[] = {
+	MFD_CELL_NAME("mpfs-tvs"),
+};
+
+static int mpfs_control_scb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				    mpfs_control_scb_devs,
+				    ARRAY_SIZE(mpfs_control_scb_devs), NULL, 0,
+				    NULL);
+}
+
+static const struct of_device_id mpfs_control_scb_of_match[] = {
+	{ .compatible = "microchip,mpfs-control-scb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpfs_control_scb_of_match);
+
+static struct platform_driver mpfs_control_scb_driver = {
+	.driver = {
+		.name = "mpfs-control-scb",
+		.of_match_table = mpfs_control_scb_of_match,
+	},
+	.probe = mpfs_control_scb_probe,
+};
+module_platform_driver(mpfs_control_scb_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_DESCRIPTION("PolarFire SoC control scb driver");
diff --git a/drivers/soc/microchip/mpfs-irqmux.c b/drivers/soc/microchip/mpfs-irqmux.c
new file mode 100644
index 000000000..ae15e913e
--- /dev/null
+++ b/drivers/soc/microchip/mpfs-irqmux.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Largely copied from rzn1_irqmux.c
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MPFS_IRQMUX_CR			0x54
+#define MPFS_IRQMUX_NUM_CHILDREN	96
+#define MPFS_IRQMUX_NUM_DIRECT		38
+#define MPFS_IRQMUX_DIRECT_START	13
+#define MPFS_IRQMUX_DIRECT_END		50
+#define MPFS_IRQMUX_NONDIRECT_END	53
+
+static int mpfs_irqmux_is_direct_mode(struct device *dev,
+				      const struct of_phandle_args *parent_args)
+{
+	if (parent_args->args_count != 1) {
+		dev_err(dev, "Invalid interrupt-map item\n");
+		return -EINVAL;
+	}
+
+	if (parent_args->args[0] < MPFS_IRQMUX_DIRECT_START ||
+			parent_args->args[0] > MPFS_IRQMUX_NONDIRECT_END) {
+		dev_err(dev, "Invalid interrupt %u\n", parent_args->args[0]);
+		return -EINVAL;
+	}
+
+	if (parent_args->args[0] > MPFS_IRQMUX_DIRECT_END)
+		return 0;
+
+	return 1;
+}
+
+static int mpfs_irqmux_probe(struct platform_device *pdev)
+{
+	DECLARE_BITMAP(child_done, MPFS_IRQMUX_NUM_CHILDREN) = {};
+	DECLARE_BITMAP(parent_done, MPFS_IRQMUX_NUM_DIRECT) = {};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct of_imap_parser imap_parser;
+	struct of_imap_item imap_item;
+	struct regmap *regmap;
+	int ret, direct_mode, line, controller, gpio, parent_line;
+	u32 tmp, val = 0, old;
+
+	regmap = device_node_to_regmap(pdev->dev.parent->of_node);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap), "Failed to find syscon regmap\n");
+
+	/* We support only #interrupt-cells = <1> and #address-cells = <0> */
+	ret = of_property_read_u32(np, "#interrupt-cells", &tmp);
+	if (ret)
+		return ret;
+	if (tmp != 1)
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "#address-cells", &tmp);
+	if (ret)
+		return ret;
+	if (tmp != 0)
+		return -EINVAL;
+
+	ret = of_imap_parser_init(&imap_parser, np, &imap_item);
+	if (ret)
+		return ret;
+
+	for_each_of_imap_item(&imap_parser, &imap_item) {
+
+		direct_mode = mpfs_irqmux_is_direct_mode(dev, &imap_item.parent_args);
+		if (direct_mode < 0) {
+			of_node_put(imap_item.parent_args.np);
+			return direct_mode;
+		}
+
+		line = imap_item.child_imap[0];
+		gpio = line % 32;
+		controller = line / 32;
+
+		if (controller > 2) {
+			of_node_put(imap_item.parent_args.np);
+			dev_err(dev, "child interrupt number too large: %d\n", line);
+			return -EINVAL;
+		}
+
+		if (test_and_set_bit(line, child_done)) {
+			of_node_put(imap_item.parent_args.np);
+			dev_err(dev, "mux child line %d already defined in interrupt-map\n",
+				line);
+			return -EINVAL;
+		}
+
+		parent_line = imap_item.parent_args.args[0] - MPFS_IRQMUX_DIRECT_START;
+		if (direct_mode && test_and_set_bit(parent_line, parent_done)) {
+			of_node_put(imap_item.parent_args.np);
+			dev_err(dev, "mux parent line %d already defined in interrupt-map\n",
+				line);
+			return -EINVAL;
+		}
+
+		/*
+		 * There are 41 interrupts assigned to GPIOs, of which 38 are "direct". Since the
+		 * mux has 32 bits only, 6 of these exclusive/"direct" interrupts remain. These
+		 * are used by GPIO controller 1's lines 18 to 23. Nothing needs to be done
+		 * for these interrupts.
+		 */
+		if (controller == 1 && gpio >= 18)
+			continue;
+
+		/*
+		 * The mux has a single register, where bits 0 to 13 mux between GPIO controller
+		 * 1's 14 GPIOs and GPIO controller 2's first 14 GPIOs. The remaining bits mux
+		 * between the first 18 GPIOs of controller 1 and the last 18 GPIOS of
+		 * controller 2. If a bit in the mux's control register is set, the
+		 * corresponding interrupt line for GPIO controller 0 or 1 will be put in
+		 * "non-direct" mode. If cleared, the "fabric" controller's will.
+		 *
+		 * Register layout:
+		 *    GPIO 1 interrupt line 17 | mux bit 31 | GPIO 2 interrupt line 31
+		 *    ...                      | ...        | ...
+		 *    ...                      | ...        | ...
+		 *    GPIO 1 interrupt line  0 | mux bit 14 | GPIO 2 interrupt line 14
+		 *    GPIO 0 interrupt line 13 | mux bit 13 | GPIO 2 interrupt line 13
+		 *    ...                      | ...        | ...
+		 *    ...                      | ...        | ...
+		 *    GPIO 0 interrupt line  0 | mux bit  0 | GPIO 2 interrupt line  0
+		 *
+		 * As the binding mandates 70 items, one for each GPIO line, there's no need to
+		 * handle anything for GPIO controller 2, since the bit will be set for the
+		 * corresponding line in GPIO controller 0 or 1.
+		 */
+		if (controller == 2)
+			continue;
+
+		/*
+		 * If in direct mode, the bit is cleared, nothing needs to be done as val is zero
+		 * initialised and that's the direct mode setting for GPIO controller 0 and 1.
+		 */
+		if (direct_mode)
+			continue;
+
+		if (controller == 0)
+			val |= 1U << gpio;
+		else
+			val |= 1U << (gpio + 14);
+	}
+
+	regmap_read(regmap, MPFS_IRQMUX_CR, &old);
+	regmap_write(regmap, MPFS_IRQMUX_CR, val);
+
+	if (val != old)
+		dev_info(dev, "firmware mux setting of 0x%x overwritten to 0x%x\n", old, val);
+
+	return 0;
+}
+
+static const struct of_device_id mpfs_irqmux_of_match[] = {
+	{ .compatible = "microchip,mpfs-irqmux", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mpfs_irqmux_of_match);
+
+static struct platform_driver mpfs_irqmux_driver = {
+	.probe = mpfs_irqmux_probe,
+	.driver = {
+		.name = "mpfs_irqmux",
+		.of_match_table = mpfs_irqmux_of_match,
+	},
+};
+module_platform_driver(mpfs_irqmux_driver);
+
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_DESCRIPTION("Polarfire SoC interrupt mux driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/microchip/mpfs-mss-top-sysreg.c b/drivers/soc/microchip/mpfs-mss-top-sysreg.c
new file mode 100644
index 000000000..b0f42b8dd
--- /dev/null
+++ b/drivers/soc/microchip/mpfs-mss-top-sysreg.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/array_size.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell mpfs_mss_top_sysreg_devs[] = {
+	MFD_CELL_NAME("mpfs-reset"),
+};
+
+static int mpfs_mss_top_sysreg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				   mpfs_mss_top_sysreg_devs,
+				   ARRAY_SIZE(mpfs_mss_top_sysreg_devs), NULL,
+				   0, NULL);
+	if (ret)
+		return ret;
+
+	return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id mpfs_mss_top_sysreg_of_match[] = {
+	{ .compatible = "microchip,mpfs-mss-top-sysreg", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpfs_mss_top_sysreg_of_match);
+
+static struct platform_driver mpfs_mss_top_sysreg_driver = {
+	.driver = {
+		.name = "mpfs-mss-top-sysreg",
+		.of_match_table = mpfs_mss_top_sysreg_of_match,
+	},
+	.probe = mpfs_mss_top_sysreg_probe,
+};
+module_platform_driver(mpfs_mss_top_sysreg_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_DESCRIPTION("PolarFire SoC mss top sysreg driver");
diff --git a/drivers/soc/microchip/mpfs-sys-controller.c b/drivers/soc/microchip/mpfs-sys-controller.c
new file mode 100644
index 000000000..0400a01b2
--- /dev/null
+++ b/drivers/soc/microchip/mpfs-sys-controller.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip PolarFire SoC (MPFS) system controller driver
+ *
+ * Copyright (c) 2020-2021 Microchip Corporation. All rights reserved.
+ *
+ * Author: Conor Dooley <conor.dooley@microchip.com>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/mtd/mtd.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/mailbox_client.h>
+#include <linux/platform_device.h>
+#include <soc/microchip/mpfs.h>
+
+/*
+ * This timeout must be long, as some services (example: image authentication)
+ * take significant time to complete
+ */
+#define MPFS_SYS_CTRL_TIMEOUT_MS 30000
+
+static DEFINE_MUTEX(transaction_lock);
+
+struct mpfs_sys_controller {
+	struct mbox_client client;
+	struct mbox_chan *chan;
+	struct completion c;
+	struct mtd_info *flash;
+	struct kref consumers;
+};
+
+struct mpfs_syscon_config {
+	unsigned int nb_subdevs;
+	struct platform_device *subdevs;
+};
+
+int mpfs_blocking_transaction(struct mpfs_sys_controller *sys_controller, struct mpfs_mss_msg *msg)
+{
+	unsigned long timeout = msecs_to_jiffies(MPFS_SYS_CTRL_TIMEOUT_MS);
+	int ret;
+
+	ret = mutex_lock_interruptible(&transaction_lock);
+	if (ret)
+		return ret;
+
+	reinit_completion(&sys_controller->c);
+
+	ret = mbox_send_message(sys_controller->chan, msg);
+	if (ret < 0) {
+		dev_warn(sys_controller->client.dev, "MPFS sys controller service timeout\n");
+		goto out;
+	}
+
+	/*
+	 * Unfortunately, the system controller will only deliver an interrupt
+	 * if a service succeeds. mbox_send_message() will block until the busy
+	 * flag is gone. If the busy flag is gone but no interrupt has arrived
+	 * to trigger the rx callback then the service can be deemed to have
+	 * failed.
+	 * The caller can then interrogate msg::response::resp_status to
+	 * determine the cause of the failure.
+	 * mbox_send_message() returns positive integers in the success path, so
+	 * ret needs to be cleared if we do get an interrupt.
+	 */
+	if (!wait_for_completion_timeout(&sys_controller->c, timeout)) {
+		ret = -EBADMSG;
+		dev_warn(sys_controller->client.dev,
+			 "MPFS sys controller service failed with status: %d\n",
+			 msg->response->resp_status);
+	} else {
+		ret = 0;
+	}
+
+out:
+	mutex_unlock(&transaction_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mpfs_blocking_transaction);
+
+static void mpfs_sys_controller_rx_callback(struct mbox_client *client, void *msg)
+{
+	struct mpfs_sys_controller *sys_controller =
+		container_of(client, struct mpfs_sys_controller, client);
+
+	complete(&sys_controller->c);
+}
+
+static void mpfs_sys_controller_delete(struct kref *kref)
+{
+	struct mpfs_sys_controller *sys_controller =
+		container_of(kref, struct mpfs_sys_controller, consumers);
+
+	mbox_free_channel(sys_controller->chan);
+	kfree(sys_controller);
+}
+
+static void mpfs_sys_controller_put(void *data)
+{
+	struct mpfs_sys_controller *sys_controller = data;
+
+	kref_put(&sys_controller->consumers, mpfs_sys_controller_delete);
+}
+
+struct mtd_info *mpfs_sys_controller_get_flash(struct mpfs_sys_controller *mpfs_client)
+{
+	return mpfs_client->flash;
+}
+EXPORT_SYMBOL(mpfs_sys_controller_get_flash);
+
+static int mpfs_sys_controller_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mpfs_sys_controller *sys_controller;
+	struct mpfs_syscon_config *of_data;
+	struct device_node *np;
+	int i, ret;
+
+	sys_controller = kzalloc_obj(*sys_controller);
+	if (!sys_controller)
+		return -ENOMEM;
+
+	np = of_parse_phandle(dev->of_node, "microchip,bitstream-flash", 0);
+	if (!np)
+		goto no_flash;
+
+	sys_controller->flash = of_get_mtd_device_by_node(np);
+	of_node_put(np);
+	if (IS_ERR(sys_controller->flash)) {
+		ret = dev_err_probe(dev, PTR_ERR(sys_controller->flash), "Failed to get flash\n");
+		goto out_free;
+	}
+
+no_flash:
+	sys_controller->client.dev = dev;
+	sys_controller->client.rx_callback = mpfs_sys_controller_rx_callback;
+	sys_controller->client.tx_block = 1U;
+	sys_controller->client.tx_tout = msecs_to_jiffies(MPFS_SYS_CTRL_TIMEOUT_MS);
+
+	sys_controller->chan = mbox_request_channel(&sys_controller->client, 0);
+	if (IS_ERR(sys_controller->chan)) {
+		ret = dev_err_probe(dev, PTR_ERR(sys_controller->chan),
+				    "Failed to get mbox channel\n");
+		goto out_free;
+	}
+
+	init_completion(&sys_controller->c);
+	kref_init(&sys_controller->consumers);
+
+	platform_set_drvdata(pdev, sys_controller);
+
+	of_data = (struct mpfs_syscon_config *) device_get_match_data(dev);
+	if (!of_data) {
+		ret = dev_err_probe(dev, -EINVAL, "Error getting match data\n");
+		goto out_free_channel;
+	}
+
+	for (i = 0; i < of_data->nb_subdevs; i++) {
+		of_data->subdevs[i].dev.parent = dev;
+		if (platform_device_register(&of_data->subdevs[i]))
+			dev_warn(dev, "Error registering sub device %s\n",
+				 of_data->subdevs[i].name);
+	}
+
+	dev_info(&pdev->dev, "Registered MPFS system controller\n");
+
+	return 0;
+
+out_free_channel:
+	mbox_free_channel(sys_controller->chan);
+out_free:
+	kfree(sys_controller);
+	return ret;
+}
+
+static void mpfs_sys_controller_remove(struct platform_device *pdev)
+{
+	struct mpfs_sys_controller *sys_controller = platform_get_drvdata(pdev);
+
+	mpfs_sys_controller_put(sys_controller);
+}
+
+static struct platform_device mpfs_subdevs[] = {
+	{
+		.name		= "mpfs-rng",
+		.id		= -1,
+	},
+	{
+		.name		= "mpfs-generic-service",
+		.id		= -1,
+	},
+	{
+		.name		= "mpfs-auto-update",
+		.id		= -1,
+	},
+};
+
+static struct platform_device pic64gx_subdevs[] = {
+	{
+		.name		= "mpfs-rng",
+		.id		= -1,
+	},
+	{
+		.name		= "mpfs-generic-service",
+		.id		= -1,
+	},
+};
+
+static const struct mpfs_syscon_config mpfs_config = {
+	.nb_subdevs = ARRAY_SIZE(mpfs_subdevs),
+	.subdevs = mpfs_subdevs,
+};
+
+static const struct mpfs_syscon_config pic64gx_config = {
+	.nb_subdevs = ARRAY_SIZE(pic64gx_subdevs),
+	.subdevs = pic64gx_subdevs,
+};
+
+static const struct of_device_id mpfs_sys_controller_of_match[] = {
+	{.compatible = "microchip,mpfs-sys-controller", .data = &mpfs_config},
+	{.compatible = "microchip,pic64gx-sys-controller", .data = &pic64gx_config},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpfs_sys_controller_of_match);
+
+struct mpfs_sys_controller *mpfs_sys_controller_get(struct device *dev)
+{
+	const struct of_device_id *match;
+	struct mpfs_sys_controller *sys_controller;
+	int ret;
+
+	if (!dev->parent)
+		goto err_no_device;
+
+	match = of_match_node(mpfs_sys_controller_of_match,  dev->parent->of_node);
+	of_node_put(dev->parent->of_node);
+	if (!match)
+		goto err_no_device;
+
+	sys_controller = dev_get_drvdata(dev->parent);
+	if (!sys_controller)
+		goto err_bad_device;
+
+	if (!kref_get_unless_zero(&sys_controller->consumers))
+		goto err_bad_device;
+
+	ret = devm_add_action_or_reset(dev, mpfs_sys_controller_put, sys_controller);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return sys_controller;
+
+err_no_device:
+	dev_dbg(dev, "Parent device was not an MPFS system controller\n");
+	return ERR_PTR(-ENODEV);
+
+err_bad_device:
+	dev_dbg(dev, "MPFS system controller found but could not register as a sub device\n");
+	return ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL(mpfs_sys_controller_get);
+
+static struct platform_driver mpfs_sys_controller_driver = {
+	.driver = {
+		.name = "mpfs-sys-controller",
+		.of_match_table = mpfs_sys_controller_of_match,
+	},
+	.probe = mpfs_sys_controller_probe,
+	.remove = mpfs_sys_controller_remove,
+};
+module_platform_driver(mpfs_sys_controller_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_DESCRIPTION("MPFS system controller driver");