Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

3 files changed, 150 insertions, 0 deletions

diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
new file mode 100644
index 000000000..f3f869639
--- /dev/null
+++ b/drivers/soc/litex/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License_Identifier: GPL-2.0
+
+menu "Enable LiteX SoC Builder specific drivers"
+
+config LITEX
+	bool
+
+config LITEX_SOC_CONTROLLER
+	tristate "Enable LiteX SoC Controller driver"
+	depends on OF
+	depends on HAS_IOMEM
+	select LITEX
+	help
+	  This option enables the SoC Controller Driver which verifies
+	  LiteX CSR access and provides common litex_[read|write]*
+	  accessors.
+	  All drivers that use functions from litex.h must depend on
+	  LITEX.
+
+endmenu
diff --git a/drivers/soc/litex/Makefile b/drivers/soc/litex/Makefile
new file mode 100644
index 000000000..98ff7325b
--- /dev/null
+++ b/drivers/soc/litex/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License_Identifier: GPL-2.0
+
+obj-$(CONFIG_LITEX_SOC_CONTROLLER)	+= litex_soc_ctrl.o
diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
new file mode 100644
index 000000000..104a5f9bf
--- /dev/null
+++ b/drivers/soc/litex/litex_soc_ctrl.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LiteX SoC Controller Driver
+ *
+ * Copyright (C) 2020 Antmicro <www.antmicro.com>
+ *
+ */
+
+#include <linux/litex.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+/* reset register located at the base address */
+#define RESET_REG_OFF           0x00
+#define RESET_REG_VALUE         0x00000001
+
+#define SCRATCH_REG_OFF         0x04
+#define SCRATCH_REG_VALUE       0x12345678
+#define SCRATCH_TEST_VALUE      0xdeadbeef
+
+/*
+ * Check LiteX CSR read/write access
+ *
+ * This function reads and writes a scratch register in order to verify if CSR
+ * access works.
+ *
+ * In case any problems are detected, the driver should panic.
+ *
+ * Access to the LiteX CSR is, by design, done in CPU native endianness.
+ * The driver should not dynamically configure access functions when
+ * the endianness mismatch is detected. Such situation indicates problems in
+ * the soft SoC design and should be solved at the LiteX generator level,
+ * not in the software.
+ */
+static int litex_check_csr_access(void __iomem *reg_addr)
+{
+	unsigned long reg;
+
+	reg = litex_read32(reg_addr + SCRATCH_REG_OFF);
+
+	if (reg != SCRATCH_REG_VALUE) {
+		panic("Scratch register read error - the system is probably broken! Expected: 0x%x but got: 0x%lx",
+			SCRATCH_REG_VALUE, reg);
+		return -EINVAL;
+	}
+
+	litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_TEST_VALUE);
+	reg = litex_read32(reg_addr + SCRATCH_REG_OFF);
+
+	if (reg != SCRATCH_TEST_VALUE) {
+		panic("Scratch register write error - the system is probably broken! Expected: 0x%x but got: 0x%lx",
+			SCRATCH_TEST_VALUE, reg);
+		return -EINVAL;
+	}
+
+	/* restore original value of the SCRATCH register */
+	litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_VALUE);
+
+	pr_info("LiteX SoC Controller driver initialized");
+
+	return 0;
+}
+
+struct litex_soc_ctrl_device {
+	void __iomem *base;
+};
+
+static int litex_reset_handler(struct sys_off_data *data)
+{
+	struct litex_soc_ctrl_device *soc_ctrl_dev = data->cb_data;
+
+	litex_write32(soc_ctrl_dev->base + RESET_REG_OFF, RESET_REG_VALUE);
+	return NOTIFY_DONE;
+}
+
+static const struct of_device_id litex_soc_ctrl_of_match[] = {
+	{.compatible = "litex,soc-controller"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, litex_soc_ctrl_of_match);
+
+static int litex_soc_ctrl_probe(struct platform_device *pdev)
+{
+	struct litex_soc_ctrl_device *soc_ctrl_dev;
+	int error;
+
+	soc_ctrl_dev = devm_kzalloc(&pdev->dev, sizeof(*soc_ctrl_dev), GFP_KERNEL);
+	if (!soc_ctrl_dev)
+		return -ENOMEM;
+
+	soc_ctrl_dev->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(soc_ctrl_dev->base))
+		return PTR_ERR(soc_ctrl_dev->base);
+
+	error = litex_check_csr_access(soc_ctrl_dev->base);
+	if (error)
+		return error;
+
+	error = devm_register_restart_handler(&pdev->dev,
+					      litex_reset_handler,
+					      soc_ctrl_dev);
+	if (error) {
+		dev_warn(&pdev->dev, "cannot register restart handler: %d\n",
+			 error);
+	}
+
+	return 0;
+}
+
+static struct platform_driver litex_soc_ctrl_driver = {
+	.driver = {
+		.name = "litex-soc-controller",
+		.of_match_table = litex_soc_ctrl_of_match,
+	},
+	.probe = litex_soc_ctrl_probe,
+};
+
+module_platform_driver(litex_soc_ctrl_driver);
+MODULE_DESCRIPTION("LiteX SoC Controller driver");
+MODULE_AUTHOR("Antmicro <www.antmicro.com>");
+MODULE_LICENSE("GPL v2");