summaryrefslogtreecommitdiffstats
path: root/drivers/soc/litex
diff options
context:
space:
mode:
authorAdrian Betschart <adrian.betschart@cinemaone.ch>2026-09-11 17:13:14 +0200
committerAlex Deucher <alexander.deucher@amd.com>2026-10-01 17:18:05 -0400
commit106b4a2a78b2a2f14885604891957b84bba502db (patch)
tree5d40eef2428fb1a4791ab46a4b19091a5910eac2 /drivers/soc/litex
downloadlinux-stable-106b4a2a78b2a2f14885604891957b84bba502db.tar.gz
linux-stable-106b4a2a78b2a2f14885604891957b84bba502db.zip
drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted
amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com> Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch> Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)
Diffstat (limited to 'drivers/soc/litex')
-rw-r--r--drivers/soc/litex/Kconfig20
-rw-r--r--drivers/soc/litex/Makefile3
-rw-r--r--drivers/soc/litex/litex_soc_ctrl.c127
3 files changed, 150 insertions, 0 deletions
diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
new file mode 100644
index 000000000..f3f869639
--- /dev/null
+++ b/drivers/soc/litex/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License_Identifier: GPL-2.0
+
+menu "Enable LiteX SoC Builder specific drivers"
+
+config LITEX
+ bool
+
+config LITEX_SOC_CONTROLLER
+ tristate "Enable LiteX SoC Controller driver"
+ depends on OF
+ depends on HAS_IOMEM
+ select LITEX
+ help
+ This option enables the SoC Controller Driver which verifies
+ LiteX CSR access and provides common litex_[read|write]*
+ accessors.
+ All drivers that use functions from litex.h must depend on
+ LITEX.
+
+endmenu
diff --git a/drivers/soc/litex/Makefile b/drivers/soc/litex/Makefile
new file mode 100644
index 000000000..98ff7325b
--- /dev/null
+++ b/drivers/soc/litex/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License_Identifier: GPL-2.0
+
+obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex_soc_ctrl.o
diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
new file mode 100644
index 000000000..104a5f9bf
--- /dev/null
+++ b/drivers/soc/litex/litex_soc_ctrl.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LiteX SoC Controller Driver
+ *
+ * Copyright (C) 2020 Antmicro <www.antmicro.com>
+ *
+ */
+
+#include <linux/litex.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+/* reset register located at the base address */
+#define RESET_REG_OFF 0x00
+#define RESET_REG_VALUE 0x00000001
+
+#define SCRATCH_REG_OFF 0x04
+#define SCRATCH_REG_VALUE 0x12345678
+#define SCRATCH_TEST_VALUE 0xdeadbeef
+
+/*
+ * Check LiteX CSR read/write access
+ *
+ * This function reads and writes a scratch register in order to verify if CSR
+ * access works.
+ *
+ * In case any problems are detected, the driver should panic.
+ *
+ * Access to the LiteX CSR is, by design, done in CPU native endianness.
+ * The driver should not dynamically configure access functions when
+ * the endianness mismatch is detected. Such situation indicates problems in
+ * the soft SoC design and should be solved at the LiteX generator level,
+ * not in the software.
+ */
+static int litex_check_csr_access(void __iomem *reg_addr)
+{
+ unsigned long reg;
+
+ reg = litex_read32(reg_addr + SCRATCH_REG_OFF);
+
+ if (reg != SCRATCH_REG_VALUE) {
+ panic("Scratch register read error - the system is probably broken! Expected: 0x%x but got: 0x%lx",
+ SCRATCH_REG_VALUE, reg);
+ return -EINVAL;
+ }
+
+ litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_TEST_VALUE);
+ reg = litex_read32(reg_addr + SCRATCH_REG_OFF);
+
+ if (reg != SCRATCH_TEST_VALUE) {
+ panic("Scratch register write error - the system is probably broken! Expected: 0x%x but got: 0x%lx",
+ SCRATCH_TEST_VALUE, reg);
+ return -EINVAL;
+ }
+
+ /* restore original value of the SCRATCH register */
+ litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_VALUE);
+
+ pr_info("LiteX SoC Controller driver initialized");
+
+ return 0;
+}
+
+struct litex_soc_ctrl_device {
+ void __iomem *base;
+};
+
+static int litex_reset_handler(struct sys_off_data *data)
+{
+ struct litex_soc_ctrl_device *soc_ctrl_dev = data->cb_data;
+
+ litex_write32(soc_ctrl_dev->base + RESET_REG_OFF, RESET_REG_VALUE);
+ return NOTIFY_DONE;
+}
+
+static const struct of_device_id litex_soc_ctrl_of_match[] = {
+ {.compatible = "litex,soc-controller"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, litex_soc_ctrl_of_match);
+
+static int litex_soc_ctrl_probe(struct platform_device *pdev)
+{
+ struct litex_soc_ctrl_device *soc_ctrl_dev;
+ int error;
+
+ soc_ctrl_dev = devm_kzalloc(&pdev->dev, sizeof(*soc_ctrl_dev), GFP_KERNEL);
+ if (!soc_ctrl_dev)
+ return -ENOMEM;
+
+ soc_ctrl_dev->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(soc_ctrl_dev->base))
+ return PTR_ERR(soc_ctrl_dev->base);
+
+ error = litex_check_csr_access(soc_ctrl_dev->base);
+ if (error)
+ return error;
+
+ error = devm_register_restart_handler(&pdev->dev,
+ litex_reset_handler,
+ soc_ctrl_dev);
+ if (error) {
+ dev_warn(&pdev->dev, "cannot register restart handler: %d\n",
+ error);
+ }
+
+ return 0;
+}
+
+static struct platform_driver litex_soc_ctrl_driver = {
+ .driver = {
+ .name = "litex-soc-controller",
+ .of_match_table = litex_soc_ctrl_of_match,
+ },
+ .probe = litex_soc_ctrl_probe,
+};
+
+module_platform_driver(litex_soc_ctrl_driver);
+MODULE_DESCRIPTION("LiteX SoC Controller driver");
+MODULE_AUTHOR("Antmicro <www.antmicro.com>");
+MODULE_LICENSE("GPL v2");