Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 356 insertions, 0 deletions

diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
new file mode 100644
index 000000000..4d8574cac
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+
+#include <linux/aspeed-lpc-ctrl.h>
+
+#define DEVICE_NAME	"aspeed-lpc-ctrl"
+
+#define HICR5 0x80
+#define HICR5_ENL2H	BIT(8)
+#define HICR5_ENFWH	BIT(10)
+
+#define HICR6 0x84
+#define SW_FWH2AHB	BIT(17)
+
+#define HICR7 0x88
+#define HICR8 0x8c
+
+struct aspeed_lpc_ctrl {
+	struct miscdevice	miscdev;
+	struct regmap		*regmap;
+	struct clk		*clk;
+	phys_addr_t		mem_base;
+	resource_size_t		mem_size;
+	u32			pnor_size;
+	u32			pnor_base;
+	bool			fwh2ahb;
+	struct regmap		*scu;
+};
+
+static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
+{
+	return container_of(file->private_data, struct aspeed_lpc_ctrl,
+			miscdev);
+}
+
+static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+	unsigned long vsize = vma->vm_end - vma->vm_start;
+	pgprot_t prot = vma->vm_page_prot;
+
+	if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT)
+		return -EINVAL;
+
+	/* ast2400/2500 AHB accesses are not cache coherent */
+	prot = pgprot_noncached(prot);
+
+	if (remap_pfn_range(vma, vma->vm_start,
+		(lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
+		vsize, prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
+		unsigned long param)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+	struct device *dev = file->private_data;
+	void __user *p = (void __user *)param;
+	struct aspeed_lpc_ctrl_mapping map;
+	u32 addr;
+	u32 size;
+	long rc;
+
+	if (copy_from_user(&map, p, sizeof(map)))
+		return -EFAULT;
+
+	if (map.flags != 0)
+		return -EINVAL;
+
+	switch (cmd) {
+	case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
+		/* The flash windows don't report their size */
+		if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
+			return -EINVAL;
+
+		/* Support more than one window id in the future */
+		if (map.window_id != 0)
+			return -EINVAL;
+
+		/* If memory-region is not described in device tree */
+		if (!lpc_ctrl->mem_size) {
+			dev_dbg(dev, "Didn't find reserved memory\n");
+			return -ENXIO;
+		}
+
+		map.size = lpc_ctrl->mem_size;
+
+		return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
+	case ASPEED_LPC_CTRL_IOCTL_MAP:
+
+		/*
+		 * The top half of HICR7 is the MSB of the BMC address of the
+		 * mapping.
+		 * The bottom half of HICR7 is the MSB of the HOST LPC
+		 * firmware space address of the mapping.
+		 *
+		 * The 1 bits in the top of half of HICR8 represent the bits
+		 * (in the requested address) that should be ignored and
+		 * replaced with those from the top half of HICR7.
+		 * The 1 bits in the bottom half of HICR8 represent the bits
+		 * (in the requested address) that should be kept and pass
+		 * into the BMC address space.
+		 */
+
+		/*
+		 * It doesn't make sense to talk about a size or offset with
+		 * low 16 bits set. Both HICR7 and HICR8 talk about the top 16
+		 * bits of addresses and sizes.
+		 */
+
+		if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
+			return -EINVAL;
+
+		/*
+		 * Because of the way the masks work in HICR8 offset has to
+		 * be a multiple of size.
+		 */
+		if (map.offset & (map.size - 1))
+			return -EINVAL;
+
+		if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
+			if (!lpc_ctrl->pnor_size) {
+				dev_dbg(dev, "Didn't find host pnor flash\n");
+				return -ENXIO;
+			}
+			addr = lpc_ctrl->pnor_base;
+			size = lpc_ctrl->pnor_size;
+		} else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
+			/* If memory-region is not described in device tree */
+			if (!lpc_ctrl->mem_size) {
+				dev_dbg(dev, "Didn't find reserved memory\n");
+				return -ENXIO;
+			}
+			addr = lpc_ctrl->mem_base;
+			size = lpc_ctrl->mem_size;
+		} else {
+			return -EINVAL;
+		}
+
+		/* Check overflow first! */
+		if (map.offset + map.size < map.offset ||
+			map.offset + map.size > size)
+			return -EINVAL;
+
+		if (map.size == 0 || map.size > size)
+			return -EINVAL;
+
+		addr += map.offset;
+
+		/*
+		 * addr (host lpc address) is safe regardless of values. This
+		 * simply changes the address the host has to request on its
+		 * side of the LPC bus. This cannot impact the hosts own
+		 * memory space by surprise as LPC specific accessors are
+		 * required. The only strange thing that could be done is
+		 * setting the lower 16 bits but the shift takes care of that.
+		 */
+
+		rc = regmap_write(lpc_ctrl->regmap, HICR7,
+				(addr | (map.addr >> 16)));
+		if (rc)
+			return rc;
+
+		rc = regmap_write(lpc_ctrl->regmap, HICR8,
+				(~(map.size - 1)) | ((map.size >> 16) - 1));
+		if (rc)
+			return rc;
+
+		/*
+		 * Switch to FWH2AHB mode, AST2600 only.
+		 */
+		if (lpc_ctrl->fwh2ahb) {
+			/*
+			 * Enable FWH2AHB in SCU debug control register 2. This
+			 * does not turn it on, but makes it available for it
+			 * to be configured in HICR6.
+			 */
+			regmap_update_bits(lpc_ctrl->scu, 0x0D8, BIT(2), 0);
+
+			/*
+			 * The other bits in this register are interrupt status bits
+			 * that are cleared by writing 1. As we don't want to clear
+			 * them, set only the bit of interest.
+			 */
+			regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB);
+		}
+
+		/*
+		 * Enable LPC FHW cycles. This is required for the host to
+		 * access the regions specified.
+		 */
+		return regmap_update_bits(lpc_ctrl->regmap, HICR5,
+				HICR5_ENFWH | HICR5_ENL2H,
+				HICR5_ENFWH | HICR5_ENL2H);
+	}
+
+	return -EINVAL;
+}
+
+static const struct file_operations aspeed_lpc_ctrl_fops = {
+	.owner		= THIS_MODULE,
+	.mmap		= aspeed_lpc_ctrl_mmap,
+	.unlocked_ioctl	= aspeed_lpc_ctrl_ioctl,
+};
+
+static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl;
+	struct device_node *node;
+	struct resource resm;
+	struct device *dev;
+	struct device_node *np;
+	int rc;
+
+	dev = &pdev->dev;
+
+	lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
+	if (!lpc_ctrl)
+		return -ENOMEM;
+
+	/* If flash is described in device tree then store */
+	node = of_parse_phandle(dev->of_node, "flash", 0);
+	if (!node) {
+		dev_dbg(dev, "Didn't find host pnor flash node\n");
+	} else {
+		rc = of_address_to_resource(node, 1, &resm);
+		of_node_put(node);
+		if (rc) {
+			dev_err(dev, "Couldn't address to resource for flash\n");
+			return rc;
+		}
+
+		lpc_ctrl->pnor_size = resource_size(&resm);
+		lpc_ctrl->pnor_base = resm.start;
+	}
+
+
+	dev_set_drvdata(&pdev->dev, lpc_ctrl);
+
+	/* If memory-region is described in device tree then store */
+	rc = of_reserved_mem_region_to_resource(dev->of_node, 0, &resm);
+	if (!rc) {
+		lpc_ctrl->mem_size = resource_size(&resm);
+		lpc_ctrl->mem_base = resm.start;
+
+		if (!is_power_of_2(lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory size must be a power of 2, got %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
+
+		if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory must be naturally aligned for size %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
+	}
+
+	np = pdev->dev.parent->of_node;
+	if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") &&
+	    !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") &&
+	    !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) {
+		dev_err(dev, "unsupported LPC device binding\n");
+		return -ENODEV;
+	}
+
+	lpc_ctrl->regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(lpc_ctrl->regmap)) {
+		dev_err(dev, "Couldn't get regmap\n");
+		return -ENODEV;
+	}
+
+	if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl")) {
+		lpc_ctrl->fwh2ahb = true;
+
+		lpc_ctrl->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2600-scu");
+		if (IS_ERR(lpc_ctrl->scu)) {
+			dev_err(dev, "couldn't find scu\n");
+			return PTR_ERR(lpc_ctrl->scu);
+		}
+	}
+
+	lpc_ctrl->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(lpc_ctrl->clk))
+		return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk),
+				     "couldn't get clock\n");
+	rc = clk_prepare_enable(lpc_ctrl->clk);
+	if (rc) {
+		dev_err(dev, "couldn't enable clock\n");
+		return rc;
+	}
+
+	lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
+	lpc_ctrl->miscdev.name = DEVICE_NAME;
+	lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
+	lpc_ctrl->miscdev.parent = dev;
+	rc = misc_register(&lpc_ctrl->miscdev);
+	if (rc) {
+		dev_err(dev, "Unable to register device\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	clk_disable_unprepare(lpc_ctrl->clk);
+	return rc;
+}
+
+static void aspeed_lpc_ctrl_remove(struct platform_device *pdev)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
+
+	misc_deregister(&lpc_ctrl->miscdev);
+	clk_disable_unprepare(lpc_ctrl->clk);
+}
+
+static const struct of_device_id aspeed_lpc_ctrl_match[] = {
+	{ .compatible = "aspeed,ast2400-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2500-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2600-lpc-ctrl" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
+
+static struct platform_driver aspeed_lpc_ctrl_driver = {
+	.driver = {
+		.name		= DEVICE_NAME,
+		.of_match_table = aspeed_lpc_ctrl_match,
+	},
+	.probe = aspeed_lpc_ctrl_probe,
+	.remove = aspeed_lpc_ctrl_remove,
+};
+
+module_platform_driver(aspeed_lpc_ctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
+MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");