Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 56 insertions, 0 deletions

diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig
new file mode 100644
index 000000000..63a656449
--- /dev/null
+++ b/drivers/soc/aspeed/Kconfig
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+if ARCH_ASPEED || COMPILE_TEST
+
+menu "ASPEED SoC drivers"
+
+config ASPEED_LPC_CTRL
+	tristate "ASPEED LPC firmware cycle control"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
+	help
+	  Control LPC firmware cycle mappings through ioctl()s. The driver
+	  also provides a read/write interface to a BMC ram region where the
+	  host LPC read/write region can be buffered.
+
+config ASPEED_LPC_SNOOP
+	tristate "ASPEED LPC snoop support"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
+	help
+	  Provides a driver to control the LPC snoop interface which
+	  allows the BMC to listen on and save the data written by
+	  the host to an arbitrary LPC I/O port.
+
+config ASPEED_UART_ROUTING
+	tristate "ASPEED uart routing control"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
+	help
+	  Provides a driver to control the UART routing paths, allowing
+	  users to perform runtime configuration of the RX muxes among
+	  the UART controllers and I/O pins.
+
+config ASPEED_P2A_CTRL
+	tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
+	help
+	  Control ASPEED P2A VGA MMIO to BMC mappings through ioctl()s.  The
+	  driver also provides an interface for userspace mappings to a
+	  pre-defined region.
+
+config ASPEED_SOCINFO
+	bool "ASPEED SoC Information driver"
+	select SOC_BUS
+	default ARCH_ASPEED
+	help
+	  Say yes to support decoding of ASPEED BMC information.
+
+endmenu
+
+endif