Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 315 insertions, 0 deletions

diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
new file mode 100644
index 000000000..bf054dd76
--- /dev/null
+++ b/drivers/scsi/a3000.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+
+#include <asm/page.h>
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
+#include "wd33c93.h"
+#include "a3000.h"
+
+
+struct a3000_hostdata {
+	struct WD33C93_hostdata wh;
+	struct a3000_scsiregs *regs;
+	struct device *dev;
+};
+
+#define DMA_DIR(d)   ((d == DATA_OUT_DIR) ? DMA_TO_DEVICE : DMA_FROM_DEVICE)
+
+static irqreturn_t a3000_intr(int irq, void *data)
+{
+	struct Scsi_Host *instance = data;
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	unsigned int status = hdata->regs->ISTR;
+	unsigned long flags;
+
+	if (!(status & ISTR_INT_P))
+		return IRQ_NONE;
+	if (status & ISTR_INTS) {
+		spin_lock_irqsave(instance->host_lock, flags);
+		wd33c93_intr(instance);
+		spin_unlock_irqrestore(instance->host_lock, flags);
+		return IRQ_HANDLED;
+	}
+	pr_warn("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
+	return IRQ_NONE;
+}
+
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
+{
+	struct scsi_pointer *scsi_pointer = WD33C93_scsi_pointer(cmd);
+	unsigned long len = scsi_pointer->this_residual;
+	struct Scsi_Host *instance = cmd->device->host;
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	struct WD33C93_hostdata *wh = &hdata->wh;
+	struct a3000_scsiregs *regs = hdata->regs;
+	unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
+	dma_addr_t addr;
+
+	addr = dma_map_single(hdata->dev, scsi_pointer->ptr,
+			      len, DMA_DIR(dir_in));
+	if (dma_mapping_error(hdata->dev, addr)) {
+		dev_warn(hdata->dev, "cannot map SCSI data block %p\n",
+			 scsi_pointer->ptr);
+		return 1;
+	}
+	scsi_pointer->dma_handle = addr;
+
+	/*
+	 * if the physical address has the wrong alignment, or if
+	 * physical address is bad, or if it is a write and at the
+	 * end of a physical memory chunk, then allocate a bounce
+	 * buffer
+	 * MSch 20220629 - only wrong alignment tested - bounce
+	 * buffer returned by kmalloc is guaranteed to be aligned
+	 */
+	if (addr & A3000_XFER_MASK) {
+		WARN_ONCE(1, "Invalid alignment for DMA!");
+		/* drop useless mapping */
+		dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
+				 scsi_pointer->this_residual,
+				 DMA_DIR(dir_in));
+
+		wh->dma_bounce_len = (scsi_pointer->this_residual + 511) & ~0x1ff;
+		wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
+						GFP_KERNEL);
+
+		/* can't allocate memory; use PIO */
+		if (!wh->dma_bounce_buffer) {
+			wh->dma_bounce_len = 0;
+			scsi_pointer->dma_handle = (dma_addr_t) NULL;
+			return 1;
+		}
+
+		if (!dir_in) {
+			/* copy to bounce buffer for a write */
+			memcpy(wh->dma_bounce_buffer, scsi_pointer->ptr,
+			       scsi_pointer->this_residual);
+		}
+
+		addr = dma_map_single(hdata->dev, scsi_pointer->ptr,
+				      len, DMA_DIR(dir_in));
+		if (dma_mapping_error(hdata->dev, addr)) {
+			dev_warn(hdata->dev,
+				 "cannot map SCSI data block %p\n",
+				 scsi_pointer->ptr);
+			return 1;
+		}
+		scsi_pointer->dma_handle = addr;
+	}
+
+	/* setup dma direction */
+	if (!dir_in)
+		cntr |= CNTR_DDIR;
+
+	/* remember direction */
+	wh->dma_dir = dir_in;
+
+	regs->CNTR = cntr;
+
+	/* setup DMA *physical* address */
+	regs->ACR = addr;
+
+	/* no more cache flush here - dma_map_single() takes care */
+
+	/* start DMA */
+	mb();			/* make sure setup is completed */
+	regs->ST_DMA = 1;
+	mb();			/* make sure DMA has started before next IO */
+
+	/* return success */
+	return 0;
+}
+
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
+		     int status)
+{
+	struct scsi_pointer *scsi_pointer = WD33C93_scsi_pointer(SCpnt);
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	struct WD33C93_hostdata *wh = &hdata->wh;
+	struct a3000_scsiregs *regs = hdata->regs;
+
+	/* disable SCSI interrupts */
+	unsigned short cntr = CNTR_PDMD;
+
+	if (!wh->dma_dir)
+		cntr |= CNTR_DDIR;
+
+	regs->CNTR = cntr;
+	mb();			/* make sure CNTR is updated before next IO */
+
+	/* flush if we were reading */
+	if (wh->dma_dir) {
+		regs->FLUSH = 1;
+		mb();		/* don't allow prefetch */
+		while (!(regs->ISTR & ISTR_FE_FLG))
+			barrier();
+		mb();		/* no IO until FLUSH is done */
+	}
+
+	/* clear a possible interrupt */
+	/* I think that this CINT is only necessary if you are
+	 * using the terminal count features.   HM 7 Mar 1994
+	 */
+	regs->CINT = 1;
+
+	/* stop DMA */
+	regs->SP_DMA = 1;
+	mb();			/* make sure DMA is stopped before next IO */
+
+	/* restore the CONTROL bits (minus the direction flag) */
+	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+	mb();			/* make sure CNTR is updated before next IO */
+
+	dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
+			 scsi_pointer->this_residual,
+			 DMA_DIR(wh->dma_dir));
+
+	/* copy from a bounce buffer, if necessary */
+	if (status && wh->dma_bounce_buffer) {
+		if (SCpnt) {
+			if (wh->dma_dir && SCpnt)
+				memcpy(scsi_pointer->ptr, wh->dma_bounce_buffer,
+				       scsi_pointer->this_residual);
+			kfree(wh->dma_bounce_buffer);
+			wh->dma_bounce_buffer = NULL;
+			wh->dma_bounce_len = 0;
+		} else {
+			kfree(wh->dma_bounce_buffer);
+			wh->dma_bounce_buffer = NULL;
+			wh->dma_bounce_len = 0;
+		}
+	}
+}
+
+static const struct scsi_host_template amiga_a3000_scsi_template = {
+	.module			= THIS_MODULE,
+	.name			= "Amiga 3000 built-in SCSI",
+	.show_info		= wd33c93_show_info,
+	.write_info		= wd33c93_write_info,
+	.proc_name		= "A3000",
+	.queuecommand		= wd33c93_queuecommand,
+	.eh_abort_handler	= wd33c93_abort,
+	.eh_host_reset_handler	= wd33c93_host_reset,
+	.can_queue		= CAN_QUEUE,
+	.this_id		= 7,
+	.sg_tablesize		= SG_ALL,
+	.cmd_per_lun		= CMD_PER_LUN,
+	.cmd_size		= sizeof(struct scsi_pointer),
+};
+
+static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct Scsi_Host *instance;
+	int error;
+	struct a3000_scsiregs *regs;
+	wd33c93_regs wdregs;
+	struct a3000_hostdata *hdata;
+
+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
+		dev_warn(&pdev->dev, "cannot use 32 bit DMA\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
+		return -EBUSY;
+
+	instance = scsi_host_alloc(&amiga_a3000_scsi_template,
+				   sizeof(struct a3000_hostdata));
+	if (!instance) {
+		error = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	instance->irq = IRQ_AMIGA_PORTS;
+
+	regs = ZTWO_VADDR(res->start);
+	regs->DAWR = DAWR_A3000;
+
+	wdregs.SASR = &regs->SASR;
+	wdregs.SCMD = &regs->SCMD;
+
+	hdata = shost_priv(instance);
+	hdata->dev = &pdev->dev;
+	hdata->wh.no_sync = 0xff;
+	hdata->wh.fast = 0;
+	hdata->wh.dma_mode = CTRL_DMA;
+	hdata->regs = regs;
+
+	wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
+	error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
+			    "A3000 SCSI", instance);
+	if (error)
+		goto fail_irq;
+
+	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+	error = scsi_add_host(instance, NULL);
+	if (error)
+		goto fail_host;
+
+	platform_set_drvdata(pdev, instance);
+
+	scsi_scan_host(instance);
+	return 0;
+
+fail_host:
+	free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+	scsi_host_put(instance);
+fail_alloc:
+	release_mem_region(res->start, resource_size(res));
+	return error;
+}
+
+static void __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
+{
+	struct Scsi_Host *instance = platform_get_drvdata(pdev);
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	hdata->regs->CNTR = 0;
+	scsi_remove_host(instance);
+	free_irq(IRQ_AMIGA_PORTS, instance);
+	scsi_host_put(instance);
+	release_mem_region(res->start, resource_size(res));
+}
+
+/*
+ * amiga_a3000_scsi_remove() lives in .exit.text. For drivers registered via
+ * module_platform_driver_probe() this is ok because they cannot get unbound at
+ * runtime. So mark the driver struct with __refdata to prevent modpost
+ * triggering a section mismatch warning.
+ */
+static struct platform_driver amiga_a3000_scsi_driver __refdata = {
+	.remove = __exit_p(amiga_a3000_scsi_remove),
+	.driver = {
+		.name = "amiga-a3000-scsi",
+	},
+};
+
+module_platform_driver_probe(amiga_a3000_scsi_driver, amiga_a3000_scsi_probe);
+
+MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a3000-scsi");