drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 404 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
new file mode 100644
index 000000000..608db97d4
--- /dev/null
+++ b/drivers/rtc/rtc-mxc.c
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/io.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+
+#define RTC_INPUT_CLK_32768HZ	(0x00 << 5)
+#define RTC_INPUT_CLK_32000HZ	(0x01 << 5)
+#define RTC_INPUT_CLK_38400HZ	(0x02 << 5)
+
+#define RTC_SW_BIT      (1 << 0)
+#define RTC_ALM_BIT     (1 << 2)
+#define RTC_1HZ_BIT     (1 << 4)
+#define RTC_2HZ_BIT     (1 << 7)
+#define RTC_SAM0_BIT    (1 << 8)
+#define RTC_SAM1_BIT    (1 << 9)
+#define RTC_SAM2_BIT    (1 << 10)
+#define RTC_SAM3_BIT    (1 << 11)
+#define RTC_SAM4_BIT    (1 << 12)
+#define RTC_SAM5_BIT    (1 << 13)
+#define RTC_SAM6_BIT    (1 << 14)
+#define RTC_SAM7_BIT    (1 << 15)
+#define PIT_ALL_ON      (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
+			 RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
+			 RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
+
+#define RTC_ENABLE_BIT  (1 << 7)
+
+#define MAX_PIE_NUM     9
+#define MAX_PIE_FREQ    512
+
+#define MXC_RTC_TIME	0
+#define MXC_RTC_ALARM	1
+
+#define RTC_HOURMIN	0x00	/*  32bit rtc hour/min counter reg */
+#define RTC_SECOND	0x04	/*  32bit rtc seconds counter reg */
+#define RTC_ALRM_HM	0x08	/*  32bit rtc alarm hour/min reg */
+#define RTC_ALRM_SEC	0x0C	/*  32bit rtc alarm seconds reg */
+#define RTC_RTCCTL	0x10	/*  32bit rtc control reg */
+#define RTC_RTCISR	0x14	/*  32bit rtc interrupt status reg */
+#define RTC_RTCIENR	0x18	/*  32bit rtc interrupt enable reg */
+#define RTC_STPWCH	0x1C	/*  32bit rtc stopwatch min reg */
+#define RTC_DAYR	0x20	/*  32bit rtc days counter reg */
+#define RTC_DAYALARM	0x24	/*  32bit rtc day alarm reg */
+#define RTC_TEST1	0x28	/*  32bit rtc test reg 1 */
+#define RTC_TEST2	0x2C	/*  32bit rtc test reg 2 */
+#define RTC_TEST3	0x30	/*  32bit rtc test reg 3 */
+
+enum imx_rtc_type {
+	IMX1_RTC,
+	IMX21_RTC,
+};
+
+struct rtc_plat_data {
+	struct rtc_device *rtc;
+	void __iomem *ioaddr;
+	int irq;
+	struct clk *clk_ref;
+	struct clk *clk_ipg;
+	struct rtc_time g_rtc_alarm;
+	enum imx_rtc_type devtype;
+};
+
+static const struct of_device_id imx_rtc_dt_ids[] = {
+	{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
+	{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
+
+static inline int is_imx1_rtc(struct rtc_plat_data *data)
+{
+	return data->devtype == IMX1_RTC;
+}
+
+/*
+ * This function is used to obtain the RTC time or the alarm value in
+ * second.
+ */
+static time64_t get_alarm_or_time(struct device *dev, int time_alarm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
+
+	switch (time_alarm) {
+	case MXC_RTC_TIME:
+		day = readw(ioaddr + RTC_DAYR);
+		hr_min = readw(ioaddr + RTC_HOURMIN);
+		sec = readw(ioaddr + RTC_SECOND);
+		break;
+	case MXC_RTC_ALARM:
+		day = readw(ioaddr + RTC_DAYALARM);
+		hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
+		sec = readw(ioaddr + RTC_ALRM_SEC);
+		break;
+	}
+
+	hr = hr_min >> 8;
+	min = hr_min & 0xff;
+
+	return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec;
+}
+
+/*
+ * This function sets the RTC alarm value or the time value.
+ */
+static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time)
+{
+	u32 tod, day, hr, min, sec, temp;
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	day = div_s64_rem(time, 86400, &tod);
+
+	/* time is within a day now */
+	hr = tod / 3600;
+	tod -= hr * 3600;
+
+	/* time is within an hour now */
+	min = tod / 60;
+	sec = tod - min * 60;
+
+	temp = (hr << 8) + min;
+
+	switch (time_alarm) {
+	case MXC_RTC_TIME:
+		writew(day, ioaddr + RTC_DAYR);
+		writew(sec, ioaddr + RTC_SECOND);
+		writew(temp, ioaddr + RTC_HOURMIN);
+		break;
+	case MXC_RTC_ALARM:
+		writew(day, ioaddr + RTC_DAYALARM);
+		writew(sec, ioaddr + RTC_ALRM_SEC);
+		writew(temp, ioaddr + RTC_ALRM_HM);
+		break;
+	}
+}
+
+/*
+ * This function updates the RTC alarm registers and then clears all the
+ * interrupt status bits.
+ */
+static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
+{
+	time64_t time;
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	time = rtc_tm_to_time64(alrm);
+
+	/* clear all the interrupt status bits */
+	writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
+	set_alarm_or_time(dev, MXC_RTC_ALARM, time);
+}
+
+static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
+				unsigned int enabled)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
+	reg = readw(ioaddr + RTC_RTCIENR);
+
+	if (enabled)
+		reg |= bit;
+	else
+		reg &= ~bit;
+
+	writew(reg, ioaddr + RTC_RTCIENR);
+	spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
+}
+
+/* This function is the RTC interrupt service routine. */
+static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+	void __iomem *ioaddr = pdata->ioaddr;
+	u32 status;
+	u32 events = 0;
+
+	spin_lock(&pdata->rtc->irq_lock);
+	status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
+	/* clear interrupt sources */
+	writew(status, ioaddr + RTC_RTCISR);
+
+	/* update irq data & counter */
+	if (status & RTC_ALM_BIT) {
+		events |= (RTC_AF | RTC_IRQF);
+		/* RTC alarm should be one-shot */
+		mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
+	}
+
+	if (status & PIT_ALL_ON)
+		events |= (RTC_PF | RTC_IRQF);
+
+	rtc_update_irq(pdata->rtc, 1, events);
+	spin_unlock(&pdata->rtc->irq_lock);
+
+	return IRQ_HANDLED;
+}
+
+static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
+	return 0;
+}
+
+/*
+ * This function reads the current RTC time into tm in Gregorian date.
+ */
+static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	time64_t val;
+
+	/* Avoid roll-over from reading the different registers */
+	do {
+		val = get_alarm_or_time(dev, MXC_RTC_TIME);
+	} while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
+
+	rtc_time64_to_tm(val, tm);
+
+	return 0;
+}
+
+/*
+ * This function sets the internal RTC time based on tm in Gregorian date.
+ */
+static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	time64_t time = rtc_tm_to_time64(tm);
+
+	/* Avoid roll-over from reading the different registers */
+	do {
+		set_alarm_or_time(dev, MXC_RTC_TIME, time);
+	} while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
+
+	return 0;
+}
+
+/*
+ * This function reads the current alarm value into the passed in 'alrm'
+ * argument. It updates the alrm's pending field value based on the whether
+ * an alarm interrupt occurs or not.
+ */
+static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+	void __iomem *ioaddr = pdata->ioaddr;
+
+	rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
+	alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
+
+	return 0;
+}
+
+/*
+ * This function sets the RTC alarm based on passed in alrm.
+ */
+static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+
+	rtc_update_alarm(dev, &alrm->time);
+
+	memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
+	mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
+
+	return 0;
+}
+
+/* RTC layer */
+static const struct rtc_class_ops mxc_rtc_ops = {
+	.read_time		= mxc_rtc_read_time,
+	.set_time		= mxc_rtc_set_time,
+	.read_alarm		= mxc_rtc_read_alarm,
+	.set_alarm		= mxc_rtc_set_alarm,
+	.alarm_irq_enable	= mxc_rtc_alarm_irq_enable,
+};
+
+static int mxc_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	struct rtc_plat_data *pdata = NULL;
+	u32 reg;
+	unsigned long rate;
+	int ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->devtype = (uintptr_t)of_device_get_match_data(&pdev->dev);
+
+	pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pdata->ioaddr))
+		return PTR_ERR(pdata->ioaddr);
+
+	rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	pdata->rtc = rtc;
+	rtc->ops = &mxc_rtc_ops;
+	if (is_imx1_rtc(pdata)) {
+		struct rtc_time tm;
+
+		/* 9bit days + hours minutes seconds */
+		rtc->range_max = (1 << 9) * 86400 - 1;
+
+		/*
+		 * Set the start date as beginning of the current year. This can
+		 * be overridden using device tree.
+		 */
+		rtc_time64_to_tm(ktime_get_real_seconds(), &tm);
+		rtc->start_secs =  mktime64(tm.tm_year, 1, 1, 0, 0, 0);
+		rtc->set_start_time = true;
+	} else {
+		/* 16bit days + hours minutes seconds */
+		rtc->range_max = (1 << 16) * 86400ULL - 1;
+	}
+
+	pdata->clk_ipg = devm_clk_get_enabled(&pdev->dev, "ipg");
+	if (IS_ERR(pdata->clk_ipg)) {
+		dev_err(&pdev->dev, "unable to get ipg clock!\n");
+		return PTR_ERR(pdata->clk_ipg);
+	}
+
+	pdata->clk_ref = devm_clk_get_enabled(&pdev->dev, "ref");
+	if (IS_ERR(pdata->clk_ref)) {
+		dev_err(&pdev->dev, "unable to get ref clock!\n");
+		return PTR_ERR(pdata->clk_ref);
+	}
+
+	rate = clk_get_rate(pdata->clk_ref);
+
+	if (rate == 32768)
+		reg = RTC_INPUT_CLK_32768HZ;
+	else if (rate == 32000)
+		reg = RTC_INPUT_CLK_32000HZ;
+	else if (rate == 38400)
+		reg = RTC_INPUT_CLK_38400HZ;
+	else {
+		dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
+		return -EINVAL;
+	}
+
+	reg |= RTC_ENABLE_BIT;
+	writew(reg, (pdata->ioaddr + RTC_RTCCTL));
+	if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
+		dev_err(&pdev->dev, "hardware module can't be enabled!\n");
+		return -EIO;
+	}
+
+	platform_set_drvdata(pdev, pdata);
+
+	/* Configure and enable the RTC */
+	pdata->irq = platform_get_irq(pdev, 0);
+
+	if (pdata->irq >= 0 &&
+	    devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
+			     IRQF_SHARED, pdev->name, pdev) < 0) {
+		dev_warn(&pdev->dev, "interrupt not available.\n");
+		pdata->irq = -1;
+	}
+
+	if (pdata->irq >= 0) {
+		device_init_wakeup(&pdev->dev, true);
+		ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
+		if (ret)
+			dev_err(&pdev->dev, "failed to enable irq wake\n");
+	}
+
+	ret = devm_rtc_register_device(rtc);
+
+	return ret;
+}
+
+static struct platform_driver mxc_rtc_driver = {
+	.driver = {
+		   .name	= "mxc_rtc",
+		   .of_match_table = imx_rtc_dt_ids,
+	},
+	.probe = mxc_rtc_probe,
+};
+
+module_platform_driver(mxc_rtc_driver)
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("RTC driver for Freescale MXC");
+MODULE_LICENSE("GPL");
+