Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 452 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-mcp795.c b/drivers/rtc/rtc-mcp795.c
new file mode 100644
index 000000000..e12f0f806
--- /dev/null
+++ b/drivers/rtc/rtc-mcp795.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI Driver for Microchip MCP795 RTC
+ *
+ * Copyright (C) Josef Gajdusek <atx@atx.name>
+ *
+ * based on other Linux RTC drivers
+ *
+ * Device datasheet:
+ * https://ww1.microchip.com/downloads/en/DeviceDoc/22280A.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/printk.h>
+#include <linux/spi/spi.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+
+/* MCP795 Instructions, see datasheet table 3-1 */
+#define MCP795_EEREAD	0x03
+#define MCP795_EEWRITE	0x02
+#define MCP795_EEWRDI	0x04
+#define MCP795_EEWREN	0x06
+#define MCP795_SRREAD	0x05
+#define MCP795_SRWRITE	0x01
+#define MCP795_READ	0x13
+#define MCP795_WRITE	0x12
+#define MCP795_UNLOCK	0x14
+#define MCP795_IDWRITE	0x32
+#define MCP795_IDREAD	0x33
+#define MCP795_CLRWDT	0x44
+#define MCP795_CLRRAM	0x54
+
+/* MCP795 RTCC registers, see datasheet table 4-1 */
+#define MCP795_REG_SECONDS	0x01
+#define MCP795_REG_DAY		0x04
+#define MCP795_REG_MONTH	0x06
+#define MCP795_REG_CONTROL	0x08
+#define MCP795_REG_ALM0_SECONDS	0x0C
+#define MCP795_REG_ALM0_DAY	0x0F
+
+#define MCP795_ST_BIT		BIT(7)
+#define MCP795_24_BIT		BIT(6)
+#define MCP795_LP_BIT		BIT(5)
+#define MCP795_EXTOSC_BIT	BIT(3)
+#define MCP795_OSCON_BIT	BIT(5)
+#define MCP795_ALM0_BIT		BIT(4)
+#define MCP795_ALM1_BIT		BIT(5)
+#define MCP795_ALM0IF_BIT	BIT(3)
+#define MCP795_ALM0C0_BIT	BIT(4)
+#define MCP795_ALM0C1_BIT	BIT(5)
+#define MCP795_ALM0C2_BIT	BIT(6)
+
+#define SEC_PER_DAY		(24 * 60 * 60)
+
+static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+	u8 tx[2];
+
+	tx[0] = MCP795_READ;
+	tx[1] = addr;
+	ret = spi_write_then_read(spi, tx, sizeof(tx), buf, count);
+
+	if (ret)
+		dev_err(dev, "Failed reading %d bytes from address %x.\n",
+					count, addr);
+
+	return ret;
+}
+
+static int mcp795_rtcc_write(struct device *dev, u8 addr, u8 *data, u8 count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+	u8 tx[257];
+
+	tx[0] = MCP795_WRITE;
+	tx[1] = addr;
+	memcpy(&tx[2], data, count);
+
+	ret = spi_write(spi, tx, 2 + count);
+
+	if (ret)
+		dev_err(dev, "Failed to write %d bytes to address %x.\n",
+					count, addr);
+
+	return ret;
+}
+
+static int mcp795_rtcc_set_bits(struct device *dev, u8 addr, u8 mask, u8 state)
+{
+	int ret;
+	u8 tmp;
+
+	ret = mcp795_rtcc_read(dev, addr, &tmp, 1);
+	if (ret)
+		return ret;
+
+	if ((tmp & mask) != state) {
+		tmp = (tmp & ~mask) | state;
+		ret = mcp795_rtcc_write(dev, addr, &tmp, 1);
+	}
+
+	return ret;
+}
+
+static int mcp795_stop_oscillator(struct device *dev, bool *extosc)
+{
+	int retries = 5;
+	int ret;
+	u8 data;
+
+	ret = mcp795_rtcc_set_bits(dev, MCP795_REG_SECONDS, MCP795_ST_BIT, 0);
+	if (ret)
+		return ret;
+	ret = mcp795_rtcc_read(dev, MCP795_REG_CONTROL, &data, 1);
+	if (ret)
+		return ret;
+	*extosc = !!(data & MCP795_EXTOSC_BIT);
+	ret = mcp795_rtcc_set_bits(
+				dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, 0);
+	if (ret)
+		return ret;
+	/* wait for the OSCON bit to clear */
+	do {
+		usleep_range(700, 800);
+		ret = mcp795_rtcc_read(dev, MCP795_REG_DAY, &data, 1);
+		if (ret)
+			break;
+		if (!(data & MCP795_OSCON_BIT))
+			break;
+
+	} while (--retries);
+
+	return !retries ? -EIO : ret;
+}
+
+static int mcp795_start_oscillator(struct device *dev, bool *extosc)
+{
+	if (extosc) {
+		u8 data = *extosc ? MCP795_EXTOSC_BIT : 0;
+		int ret;
+
+		ret = mcp795_rtcc_set_bits(
+			dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, data);
+		if (ret)
+			return ret;
+	}
+	return mcp795_rtcc_set_bits(
+			dev, MCP795_REG_SECONDS, MCP795_ST_BIT, MCP795_ST_BIT);
+}
+
+/* Enable or disable Alarm 0 in RTC */
+static int mcp795_update_alarm(struct device *dev, bool enable)
+{
+	int ret;
+
+	dev_dbg(dev, "%s alarm\n", enable ? "Enable" : "Disable");
+
+	if (enable) {
+		/* clear ALM0IF (Alarm 0 Interrupt Flag) bit */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_ALM0_DAY,
+					MCP795_ALM0IF_BIT, 0);
+		if (ret)
+			return ret;
+		/* enable alarm 0 */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
+					MCP795_ALM0_BIT, MCP795_ALM0_BIT);
+	} else {
+		/* disable alarm 0 and alarm 1 */
+		ret = mcp795_rtcc_set_bits(dev, MCP795_REG_CONTROL,
+					MCP795_ALM0_BIT | MCP795_ALM1_BIT, 0);
+	}
+	return ret;
+}
+
+static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
+{
+	int ret;
+	u8 data[7];
+	bool extosc;
+
+	/* Stop RTC and store current value of EXTOSC bit */
+	ret = mcp795_stop_oscillator(dev, &extosc);
+	if (ret)
+		return ret;
+
+	/* Read first, so we can leave config bits untouched */
+	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
+
+	if (ret)
+		return ret;
+
+	data[0] = (data[0] & 0x80) | bin2bcd(tim->tm_sec);
+	data[1] = (data[1] & 0x80) | bin2bcd(tim->tm_min);
+	data[2] = bin2bcd(tim->tm_hour);
+	data[3] = (data[3] & 0xF8) | bin2bcd(tim->tm_wday + 1);
+	data[4] = bin2bcd(tim->tm_mday);
+	data[5] = (data[5] & MCP795_LP_BIT) | bin2bcd(tim->tm_mon + 1);
+
+	if (tim->tm_year > 100)
+		tim->tm_year -= 100;
+
+	data[6] = bin2bcd(tim->tm_year);
+
+	/* Always write the date and month using a separate Write command.
+	 * This is a workaround for a know silicon issue that some combinations
+	 * of date and month values may result in the date being reset to 1.
+	 */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_SECONDS, data, 5);
+	if (ret)
+		return ret;
+
+	ret = mcp795_rtcc_write(dev, MCP795_REG_MONTH, &data[5], 2);
+	if (ret)
+		return ret;
+
+	/* Start back RTC and restore previous value of EXTOSC bit.
+	 * There is no need to clear EXTOSC bit when the previous value was 0
+	 * because it was already cleared when stopping the RTC oscillator.
+	 */
+	ret = mcp795_start_oscillator(dev, extosc ? &extosc : NULL);
+	if (ret)
+		return ret;
+
+	dev_dbg(dev, "Set mcp795: %ptR\n", tim);
+
+	return 0;
+}
+
+static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
+{
+	int ret;
+	u8 data[7];
+
+	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
+
+	if (ret)
+		return ret;
+
+	tim->tm_sec	= bcd2bin(data[0] & 0x7F);
+	tim->tm_min	= bcd2bin(data[1] & 0x7F);
+	tim->tm_hour	= bcd2bin(data[2] & 0x3F);
+	tim->tm_wday	= bcd2bin(data[3] & 0x07) - 1;
+	tim->tm_mday	= bcd2bin(data[4] & 0x3F);
+	tim->tm_mon	= bcd2bin(data[5] & 0x1F) - 1;
+	tim->tm_year	= bcd2bin(data[6]) + 100; /* Assume we are in 20xx */
+
+	dev_dbg(dev, "Read from mcp795: %ptR\n", tim);
+
+	return 0;
+}
+
+static int mcp795_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct rtc_time now_tm;
+	time64_t now;
+	time64_t later;
+	u8 tmp[6];
+	int ret;
+
+	/* Read current time from RTC hardware */
+	ret = mcp795_read_time(dev, &now_tm);
+	if (ret)
+		return ret;
+	/* Get the number of seconds since 1970 */
+	now = rtc_tm_to_time64(&now_tm);
+	later = rtc_tm_to_time64(&alm->time);
+	if (later <= now)
+		return -EINVAL;
+	/* make sure alarm fires within the next one year */
+	if ((later - now) >=
+		(SEC_PER_DAY * (365 + is_leap_year(alm->time.tm_year))))
+		return -EDOM;
+	/* disable alarm */
+	ret = mcp795_update_alarm(dev, false);
+	if (ret)
+		return ret;
+	/* Read registers, so we can leave configuration bits untouched */
+	ret = mcp795_rtcc_read(dev, MCP795_REG_ALM0_SECONDS, tmp, sizeof(tmp));
+	if (ret)
+		return ret;
+
+	alm->time.tm_year	= -1;
+	alm->time.tm_isdst	= -1;
+	alm->time.tm_yday	= -1;
+
+	tmp[0] = (tmp[0] & 0x80) | bin2bcd(alm->time.tm_sec);
+	tmp[1] = (tmp[1] & 0x80) | bin2bcd(alm->time.tm_min);
+	tmp[2] = (tmp[2] & 0xE0) | bin2bcd(alm->time.tm_hour);
+	tmp[3] = (tmp[3] & 0x80) | bin2bcd(alm->time.tm_wday + 1);
+	/* set alarm match: seconds, minutes, hour, day, date and month */
+	tmp[3] |= (MCP795_ALM0C2_BIT | MCP795_ALM0C1_BIT | MCP795_ALM0C0_BIT);
+	tmp[4] = (tmp[4] & 0xC0) | bin2bcd(alm->time.tm_mday);
+	tmp[5] = (tmp[5] & 0xE0) | bin2bcd(alm->time.tm_mon + 1);
+
+	ret = mcp795_rtcc_write(dev, MCP795_REG_ALM0_SECONDS, tmp, sizeof(tmp));
+	if (ret)
+		return ret;
+
+	/* enable alarm if requested */
+	if (alm->enabled) {
+		ret = mcp795_update_alarm(dev, true);
+		if (ret)
+			return ret;
+		dev_dbg(dev, "Alarm IRQ armed\n");
+	}
+	dev_dbg(dev, "Set alarm: %ptRdr(%d) %ptRt\n",
+		&alm->time, alm->time.tm_wday, &alm->time);
+	return 0;
+}
+
+static int mcp795_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	u8 data[6];
+	int ret;
+
+	ret = mcp795_rtcc_read(
+			dev, MCP795_REG_ALM0_SECONDS, data, sizeof(data));
+	if (ret)
+		return ret;
+
+	alm->time.tm_sec	= bcd2bin(data[0] & 0x7F);
+	alm->time.tm_min	= bcd2bin(data[1] & 0x7F);
+	alm->time.tm_hour	= bcd2bin(data[2] & 0x1F);
+	alm->time.tm_wday	= bcd2bin(data[3] & 0x07) - 1;
+	alm->time.tm_mday	= bcd2bin(data[4] & 0x3F);
+	alm->time.tm_mon	= bcd2bin(data[5] & 0x1F) - 1;
+	alm->time.tm_year	= -1;
+	alm->time.tm_isdst	= -1;
+	alm->time.tm_yday	= -1;
+
+	dev_dbg(dev, "Read alarm: %ptRdr(%d) %ptRt\n",
+		&alm->time, alm->time.tm_wday, &alm->time);
+	return 0;
+}
+
+static int mcp795_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	return mcp795_update_alarm(dev, !!enabled);
+}
+
+static irqreturn_t mcp795_irq(int irq, void *data)
+{
+	struct spi_device *spi = data;
+	struct rtc_device *rtc = spi_get_drvdata(spi);
+	int ret;
+
+	rtc_lock(rtc);
+
+	/* Disable alarm.
+	 * There is no need to clear ALM0IF (Alarm 0 Interrupt Flag) bit,
+	 * because it is done every time when alarm is enabled.
+	 */
+	ret = mcp795_update_alarm(&spi->dev, false);
+	if (ret)
+		dev_err(&spi->dev,
+			"Failed to disable alarm in IRQ (ret=%d)\n", ret);
+	rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+
+	rtc_unlock(rtc);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops mcp795_rtc_ops = {
+		.read_time = mcp795_read_time,
+		.set_time = mcp795_set_time,
+		.read_alarm = mcp795_read_alarm,
+		.set_alarm = mcp795_set_alarm,
+		.alarm_irq_enable = mcp795_alarm_irq_enable
+};
+
+static int mcp795_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	int ret;
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to setup SPI\n");
+		return ret;
+	}
+
+	/* Start the oscillator but don't set the value of EXTOSC bit */
+	mcp795_start_oscillator(&spi->dev, NULL);
+	/* Clear the 12 hour mode flag*/
+	mcp795_rtcc_set_bits(&spi->dev, 0x03, MCP795_24_BIT, 0);
+
+	rtc = devm_rtc_device_register(&spi->dev, "rtc-mcp795",
+					&mcp795_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	if (spi->irq > 0) {
+		dev_dbg(&spi->dev, "Alarm support enabled\n");
+
+		/* Clear any pending alarm (ALM0IF bit) before requesting
+		 * the interrupt.
+		 */
+		mcp795_rtcc_set_bits(&spi->dev, MCP795_REG_ALM0_DAY,
+					MCP795_ALM0IF_BIT, 0);
+		ret = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
+				mcp795_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				dev_name(&rtc->dev), spi);
+		if (ret)
+			dev_err(&spi->dev, "Failed to request IRQ: %d: %d\n",
+						spi->irq, ret);
+		else
+			device_init_wakeup(&spi->dev, true);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mcp795_of_match[] = {
+	{ .compatible = "maxim,mcp795" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mcp795_of_match);
+#endif
+
+static const struct spi_device_id mcp795_spi_ids[] = {
+	{ .name = "mcp795" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, mcp795_spi_ids);
+
+static struct spi_driver mcp795_driver = {
+		.driver = {
+				.name = "rtc-mcp795",
+				.of_match_table = of_match_ptr(mcp795_of_match),
+		},
+		.probe = mcp795_probe,
+		.id_table = mcp795_spi_ids,
+};
+
+module_spi_driver(mcp795_driver);
+
+MODULE_DESCRIPTION("MCP795 RTC SPI Driver");
+MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
+MODULE_LICENSE("GPL");