Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 592 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
new file mode 100644
index 000000000..1d52cc3de
--- /dev/null
+++ b/drivers/rtc/rtc-hym8563.c
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Haoyu HYM8563 RTC driver
+ *
+ * Copyright (C) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on rtc-HYM8563
+ * Copyright (C) 2010 ROCKCHIP, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+
+#define HYM8563_CTL1		0x00
+#define HYM8563_CTL1_TEST	BIT(7)
+#define HYM8563_CTL1_STOP	BIT(5)
+#define HYM8563_CTL1_TESTC	BIT(3)
+
+#define HYM8563_CTL2		0x01
+#define HYM8563_CTL2_TI_TP	BIT(4)
+#define HYM8563_CTL2_AF		BIT(3)
+#define HYM8563_CTL2_TF		BIT(2)
+#define HYM8563_CTL2_AIE	BIT(1)
+#define HYM8563_CTL2_TIE	BIT(0)
+
+#define HYM8563_SEC		0x02
+#define HYM8563_SEC_VL		BIT(7)
+#define HYM8563_SEC_MASK	0x7f
+
+#define HYM8563_MIN		0x03
+#define HYM8563_MIN_MASK	0x7f
+
+#define HYM8563_HOUR		0x04
+#define HYM8563_HOUR_MASK	0x3f
+
+#define HYM8563_DAY		0x05
+#define HYM8563_DAY_MASK	0x3f
+
+#define HYM8563_WEEKDAY		0x06
+#define HYM8563_WEEKDAY_MASK	0x07
+
+#define HYM8563_MONTH		0x07
+#define HYM8563_MONTH_CENTURY	BIT(7)
+#define HYM8563_MONTH_MASK	0x1f
+
+#define HYM8563_YEAR		0x08
+
+#define HYM8563_ALM_MIN		0x09
+#define HYM8563_ALM_HOUR	0x0a
+#define HYM8563_ALM_DAY		0x0b
+#define HYM8563_ALM_WEEK	0x0c
+
+/* Each alarm check can be disabled by setting this bit in the register */
+#define HYM8563_ALM_BIT_DISABLE	BIT(7)
+
+#define HYM8563_CLKOUT		0x0d
+#define HYM8563_CLKOUT_ENABLE	BIT(7)
+#define HYM8563_CLKOUT_32768	0
+#define HYM8563_CLKOUT_1024	1
+#define HYM8563_CLKOUT_32	2
+#define HYM8563_CLKOUT_1	3
+#define HYM8563_CLKOUT_MASK	3
+
+#define HYM8563_TMR_CTL		0x0e
+#define HYM8563_TMR_CTL_ENABLE	BIT(7)
+#define HYM8563_TMR_CTL_4096	0
+#define HYM8563_TMR_CTL_64	1
+#define HYM8563_TMR_CTL_1	2
+#define HYM8563_TMR_CTL_1_60	3
+#define HYM8563_TMR_CTL_MASK	3
+
+#define HYM8563_TMR_CNT		0x0f
+
+struct hym8563 {
+	struct i2c_client	*client;
+	struct rtc_device	*rtc;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw		clkout_hw;
+#endif
+};
+
+/*
+ * RTC handling
+ */
+
+static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 buf[7];
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
+	if (ret < 0)
+		return ret;
+
+	if (buf[0] & HYM8563_SEC_VL) {
+		dev_warn(&client->dev,
+			 "no valid clock/calendar values available\n");
+		return -EINVAL;
+	}
+
+	tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
+	tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
+	tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
+	tm->tm_mday = bcd2bin(buf[3] & HYM8563_DAY_MASK);
+	tm->tm_wday = bcd2bin(buf[4] & HYM8563_WEEKDAY_MASK); /* 0 = Sun */
+	tm->tm_mon = bcd2bin(buf[5] & HYM8563_MONTH_MASK) - 1; /* 0 = Jan */
+	tm->tm_year = bcd2bin(buf[6]) + 100;
+
+	return 0;
+}
+
+static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 buf[7];
+	int ret;
+
+	/* Years >= 2100 are to far in the future, 19XX is to early */
+	if (tm->tm_year < 100 || tm->tm_year >= 200)
+		return -EINVAL;
+
+	buf[0] = bin2bcd(tm->tm_sec);
+	buf[1] = bin2bcd(tm->tm_min);
+	buf[2] = bin2bcd(tm->tm_hour);
+	buf[3] = bin2bcd(tm->tm_mday);
+	buf[4] = bin2bcd(tm->tm_wday);
+	buf[5] = bin2bcd(tm->tm_mon + 1);
+
+	/*
+	 * While the HYM8563 has a century flag in the month register,
+	 * it does not seem to carry it over a subsequent write/read.
+	 * So we'll limit ourself to 100 years, starting at 2000 for now.
+	 */
+	buf[6] = bin2bcd(tm->tm_year - 100);
+
+	/*
+	 * CTL1 only contains TEST-mode bits apart from stop,
+	 * so no need to read the value first
+	 */
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1,
+						HYM8563_CTL1_STOP);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_i2c_block_data(client, HYM8563_SEC, 7, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int hym8563_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int data;
+
+	data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (data < 0)
+		return data;
+
+	if (enabled)
+		data |= HYM8563_CTL2_AIE;
+	else
+		data &= ~HYM8563_CTL2_AIE;
+
+	return i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
+};
+
+static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rtc_time *alm_tm = &alm->time;
+	u8 buf[4];
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
+	if (ret < 0)
+		return ret;
+
+	/* The alarm only has a minute accuracy */
+	alm_tm->tm_sec = 0;
+
+	alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[0] & HYM8563_MIN_MASK);
+	alm_tm->tm_hour = (buf[1] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[1] & HYM8563_HOUR_MASK);
+	alm_tm->tm_mday = (buf[2] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[2] & HYM8563_DAY_MASK);
+	alm_tm->tm_wday = (buf[3] & HYM8563_ALM_BIT_DISABLE) ?
+					-1 :
+					bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK);
+
+	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (ret < 0)
+		return ret;
+
+	if (ret & HYM8563_CTL2_AIE)
+		alm->enabled = 1;
+
+	return 0;
+}
+
+static int hym8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rtc_time *alm_tm = &alm->time;
+	u8 buf[4];
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~HYM8563_CTL2_AIE;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
+	if (ret < 0)
+		return ret;
+
+	buf[0] = (alm_tm->tm_min < 60 && alm_tm->tm_min >= 0) ?
+			bin2bcd(alm_tm->tm_min) : HYM8563_ALM_BIT_DISABLE;
+
+	buf[1] = (alm_tm->tm_hour < 24 && alm_tm->tm_hour >= 0) ?
+			bin2bcd(alm_tm->tm_hour) : HYM8563_ALM_BIT_DISABLE;
+
+	buf[2] = (alm_tm->tm_mday <= 31 && alm_tm->tm_mday >= 1) ?
+			bin2bcd(alm_tm->tm_mday) : HYM8563_ALM_BIT_DISABLE;
+
+	buf[3] = (alm_tm->tm_wday < 7 && alm_tm->tm_wday >= 0) ?
+			bin2bcd(alm_tm->tm_wday) : HYM8563_ALM_BIT_DISABLE;
+
+	ret = i2c_smbus_write_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
+	if (ret < 0)
+		return ret;
+
+	return hym8563_rtc_alarm_irq_enable(dev, alm->enabled);
+}
+
+static const struct rtc_class_ops hym8563_rtc_ops = {
+	.read_time		= hym8563_rtc_read_time,
+	.set_time		= hym8563_rtc_set_time,
+	.alarm_irq_enable	= hym8563_rtc_alarm_irq_enable,
+	.read_alarm		= hym8563_rtc_read_alarm,
+	.set_alarm		= hym8563_rtc_set_alarm,
+};
+
+/*
+ * Handling of the clkout
+ */
+
+#ifdef CONFIG_COMMON_CLK
+#define clkout_hw_to_hym8563(_hw) container_of(_hw, struct hym8563, clkout_hw)
+
+static int clkout_rates[] = {
+	32768,
+	1024,
+	32,
+	1,
+};
+
+static unsigned long hym8563_clkout_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+
+	if (ret < 0)
+		return 0;
+
+	ret &= HYM8563_CLKOUT_MASK;
+	return clkout_rates[ret];
+}
+
+static int hym8563_clkout_determine_rate(struct clk_hw *hw,
+					 struct clk_rate_request *req)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] <= req->rate) {
+			req->rate = clkout_rates[i];
+
+			return 0;
+		}
+
+	req->rate = clkout_rates[0];
+
+	return 0;
+}
+
+static int hym8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+	int i;
+
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate) {
+			ret &= ~HYM8563_CLKOUT_MASK;
+			ret |= i;
+			return i2c_smbus_write_byte_data(client,
+							 HYM8563_CLKOUT, ret);
+		}
+
+	return -EINVAL;
+}
+
+static int hym8563_clkout_control(struct clk_hw *hw, bool enable)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+
+	if (ret < 0)
+		return ret;
+
+	if (enable)
+		ret |= HYM8563_CLKOUT_ENABLE;
+	else
+		ret &= ~HYM8563_CLKOUT_ENABLE;
+
+	return i2c_smbus_write_byte_data(client, HYM8563_CLKOUT, ret);
+}
+
+static int hym8563_clkout_prepare(struct clk_hw *hw)
+{
+	return hym8563_clkout_control(hw, 1);
+}
+
+static void hym8563_clkout_unprepare(struct clk_hw *hw)
+{
+	hym8563_clkout_control(hw, 0);
+}
+
+static int hym8563_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
+	struct i2c_client *client = hym8563->client;
+	int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
+
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & HYM8563_CLKOUT_ENABLE);
+}
+
+static const struct clk_ops hym8563_clkout_ops = {
+	.prepare = hym8563_clkout_prepare,
+	.unprepare = hym8563_clkout_unprepare,
+	.is_prepared = hym8563_clkout_is_prepared,
+	.recalc_rate = hym8563_clkout_recalc_rate,
+	.determine_rate = hym8563_clkout_determine_rate,
+	.set_rate = hym8563_clkout_set_rate,
+};
+
+static struct clk *hym8563_clkout_register_clk(struct hym8563 *hym8563)
+{
+	struct i2c_client *client = hym8563->client;
+	struct device_node *node = client->dev.of_node;
+	struct clk_init_data init = {};
+	struct clk *clk;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CLKOUT,
+						0);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	init.name = "hym8563-clkout";
+	init.ops = &hym8563_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	hym8563->clkout_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = clk_register(&client->dev, &hym8563->clkout_hw);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
+/*
+ * The alarm interrupt is implemented as a level-low interrupt in the
+ * hym8563, while the timer interrupt uses a falling edge.
+ * We don't use the timer at all, so the interrupt is requested to
+ * use the level-low trigger.
+ */
+static irqreturn_t hym8563_irq(int irq, void *dev_id)
+{
+	struct hym8563 *hym8563 = (struct hym8563 *)dev_id;
+	struct i2c_client *client = hym8563->client;
+	int data, ret;
+
+	rtc_lock(hym8563->rtc);
+
+	/* Clear the alarm flag */
+
+	data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (data < 0) {
+		dev_err(&client->dev, "%s: error reading i2c data %d\n",
+			__func__, data);
+		goto out;
+	}
+
+	data &= ~HYM8563_CTL2_AF;
+
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
+	if (ret < 0) {
+		dev_err(&client->dev, "%s: error writing i2c data %d\n",
+			__func__, ret);
+	}
+
+out:
+	rtc_unlock(hym8563->rtc);
+	return IRQ_HANDLED;
+}
+
+static int hym8563_init_device(struct i2c_client *client)
+{
+	int ret;
+
+	/* Clear stop flag if present */
+	ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
+	if (ret < 0)
+		return ret;
+
+	/* Disable alarm and timer interrupts */
+	ret &= ~HYM8563_CTL2_AIE;
+	ret &= ~HYM8563_CTL2_TIE;
+
+	/* Clear any pending alarm and timer flags */
+	if (ret & HYM8563_CTL2_AF)
+		ret &= ~HYM8563_CTL2_AF;
+
+	if (ret & HYM8563_CTL2_TF)
+		ret &= ~HYM8563_CTL2_TF;
+
+	ret &= ~HYM8563_CTL2_TI_TP;
+
+	return i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hym8563_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	if (device_may_wakeup(dev)) {
+		ret = enable_irq_wake(client->irq);
+		if (ret) {
+			dev_err(dev, "enable_irq_wake failed, %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int hym8563_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(hym8563_pm_ops, hym8563_suspend, hym8563_resume);
+
+static int hym8563_probe(struct i2c_client *client)
+{
+	struct hym8563 *hym8563;
+	int ret;
+
+	hym8563 = devm_kzalloc(&client->dev, sizeof(*hym8563), GFP_KERNEL);
+	if (!hym8563)
+		return -ENOMEM;
+
+	hym8563->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(hym8563->rtc))
+		return PTR_ERR(hym8563->rtc);
+
+	hym8563->client = client;
+	i2c_set_clientdata(client, hym8563);
+
+	ret = hym8563_init_device(client);
+	if (ret) {
+		dev_err(&client->dev, "could not init device, %d\n", ret);
+		return ret;
+	}
+
+	if (client->irq > 0) {
+		unsigned long irqflags = IRQF_TRIGGER_LOW;
+
+		if (dev_fwnode(&client->dev))
+			irqflags = 0;
+
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, hym8563_irq,
+						irqflags | IRQF_ONESHOT,
+						client->name, hym8563);
+		if (ret < 0) {
+			dev_err(&client->dev, "irq %d request failed, %d\n",
+				client->irq, ret);
+			return ret;
+		}
+	}
+
+	if (client->irq > 0 ||
+	    device_property_read_bool(&client->dev, "wakeup-source")) {
+		device_init_wakeup(&client->dev, true);
+	}
+
+	/* check state of calendar information */
+	ret = i2c_smbus_read_byte_data(client, HYM8563_SEC);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(&client->dev, "rtc information is %s\n",
+		(ret & HYM8563_SEC_VL) ? "invalid" : "valid");
+
+	hym8563->rtc->ops = &hym8563_rtc_ops;
+	set_bit(RTC_FEATURE_ALARM_RES_MINUTE, hym8563->rtc->features);
+	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, hym8563->rtc->features);
+
+#ifdef CONFIG_COMMON_CLK
+	hym8563_clkout_register_clk(hym8563);
+#endif
+
+	return devm_rtc_register_device(hym8563->rtc);
+}
+
+static const struct i2c_device_id hym8563_id[] = {
+	{ .name = "hym8563" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, hym8563_id);
+
+static const struct of_device_id hym8563_dt_idtable[] = {
+	{ .compatible = "haoyu,hym8563" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hym8563_dt_idtable);
+
+static struct i2c_driver hym8563_driver = {
+	.driver		= {
+		.name	= "rtc-hym8563",
+		.pm	= &hym8563_pm_ops,
+		.of_match_table	= hym8563_dt_idtable,
+	},
+	.probe		= hym8563_probe,
+	.id_table	= hym8563_id,
+};
+
+module_i2c_driver(hym8563_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("HYM8563 RTC driver");
+MODULE_LICENSE("GPL");