Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 745 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
new file mode 100644
index 000000000..d1ef9e0da
--- /dev/null
+++ b/drivers/rtc/rtc-ds3232.c
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RTC client/driver for the Maxim/Dallas DS3232/DS3234 Real-Time Clock
+ *
+ * Copyright (C) 2009-2011 Freescale Semiconductor.
+ * Author: Jack Lan <jack.lan@freescale.com>
+ * Copyright (C) 2008 MIMOMax Wireless Ltd.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/hwmon.h>
+
+#define DS3232_REG_SECONDS      0x00
+#define DS3232_REG_MINUTES      0x01
+#define DS3232_REG_HOURS        0x02
+#define DS3232_REG_AMPM         0x02
+#define DS3232_REG_DAY          0x03
+#define DS3232_REG_DATE         0x04
+#define DS3232_REG_MONTH        0x05
+#define DS3232_REG_CENTURY      0x05
+#define DS3232_REG_YEAR         0x06
+#define DS3232_REG_ALARM1       0x07       /* Alarm 1 BASE */
+#define DS3232_REG_ALARM2       0x0B       /* Alarm 2 BASE */
+#define DS3232_REG_CR           0x0E       /* Control register */
+#       define DS3232_REG_CR_nEOSC   0x80
+#       define DS3232_REG_CR_INTCN   0x04
+#       define DS3232_REG_CR_A2IE    0x02
+#       define DS3232_REG_CR_A1IE    0x01
+
+#define DS3232_REG_SR           0x0F       /* control/status register */
+#       define DS3232_REG_SR_OSF     0x80
+#       define DS3232_REG_SR_BSY     0x04
+#       define DS3232_REG_SR_A2F     0x02
+#       define DS3232_REG_SR_A1F     0x01
+
+#define DS3232_REG_TEMPERATURE	0x11
+#define DS3232_REG_SRAM_START   0x14
+#define DS3232_REG_SRAM_END     0xFF
+
+#define DS3232_REG_SRAM_SIZE    236
+
+struct ds3232 {
+	struct device *dev;
+	struct regmap *regmap;
+	int irq;
+	struct rtc_device *rtc;
+
+	bool suspended;
+};
+
+static int ds3232_check_rtc_status(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret = 0;
+	int control, stat;
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & DS3232_REG_SR_OSF)
+		dev_warn(dev,
+				"oscillator discontinuity flagged, "
+				"time unreliable\n");
+
+	stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+
+	ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+	if (ret)
+		return ret;
+
+	/* If the alarm is pending, clear it before requesting
+	 * the interrupt, so an interrupt event isn't reported
+	 * before everything is initialized.
+	 */
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		return ret;
+
+	control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+	control |= DS3232_REG_CR_INTCN;
+
+	return regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+}
+
+static int ds3232_read_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret;
+	u8 buf[7];
+	unsigned int year, month, day, hour, minute, second;
+	unsigned int week, twelve_hr, am_pm;
+	unsigned int century, add_century = 0;
+
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+	if (ret)
+		return ret;
+
+	second = buf[0];
+	minute = buf[1];
+	hour = buf[2];
+	week = buf[3];
+	day = buf[4];
+	month = buf[5];
+	year = buf[6];
+
+	/* Extract additional information for AM/PM and century */
+
+	twelve_hr = hour & 0x40;
+	am_pm = hour & 0x20;
+	century = month & 0x80;
+
+	/* Write to rtc_time structure */
+
+	time->tm_sec = bcd2bin(second);
+	time->tm_min = bcd2bin(minute);
+	if (twelve_hr) {
+		/* Convert to 24 hr */
+		if (am_pm)
+			time->tm_hour = bcd2bin(hour & 0x1F) + 12;
+		else
+			time->tm_hour = bcd2bin(hour & 0x1F);
+	} else {
+		time->tm_hour = bcd2bin(hour);
+	}
+
+	/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+	time->tm_wday = bcd2bin(week) - 1;
+	time->tm_mday = bcd2bin(day);
+	/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+	time->tm_mon = bcd2bin(month & 0x7F) - 1;
+	if (century)
+		add_century = 100;
+
+	time->tm_year = bcd2bin(year) + add_century;
+
+	return 0;
+}
+
+static int ds3232_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	u8 buf[7];
+
+	/* Extract time from rtc_time and load into ds3232*/
+
+	buf[0] = bin2bcd(time->tm_sec);
+	buf[1] = bin2bcd(time->tm_min);
+	buf[2] = bin2bcd(time->tm_hour);
+	/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+	buf[3] = bin2bcd(time->tm_wday + 1);
+	buf[4] = bin2bcd(time->tm_mday); /* Date */
+	/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+	buf[5] = bin2bcd(time->tm_mon + 1);
+	if (time->tm_year >= 100) {
+		buf[5] |= 0x80;
+		buf[6] = bin2bcd(time->tm_year - 100);
+	} else {
+		buf[6] = bin2bcd(time->tm_year);
+	}
+
+	return regmap_bulk_write(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+}
+
+/*
+ * DS3232 has two alarm, we only use alarm1
+ * According to linux specification, only support one-shot alarm
+ * no periodic alarm mode
+ */
+static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control, stat;
+	int ret;
+	u8 buf[4];
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto out;
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		goto out;
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+	if (ret)
+		goto out;
+
+	alarm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
+	alarm->time.tm_min = bcd2bin(buf[1] & 0x7F);
+	alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F);
+	alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F);
+
+	alarm->enabled = !!(control & DS3232_REG_CR_A1IE);
+	alarm->pending = !!(stat & DS3232_REG_SR_A1F);
+
+	ret = 0;
+out:
+	return ret;
+}
+
+/*
+ * linux rtc-module does not support wday alarm
+ * and only 24h time mode supported indeed
+ */
+static int ds3232_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control, stat;
+	int ret;
+	u8 buf[4];
+
+	if (ds3232->irq <= 0)
+		return -EINVAL;
+
+	buf[0] = bin2bcd(alarm->time.tm_sec);
+	buf[1] = bin2bcd(alarm->time.tm_min);
+	buf[2] = bin2bcd(alarm->time.tm_hour);
+	buf[3] = bin2bcd(alarm->time.tm_mday);
+
+	/* clear alarm interrupt enable bit */
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		goto out;
+	control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+	if (ret)
+		goto out;
+
+	/* clear any pending alarm flag */
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto out;
+	stat &= ~(DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+	if (ret)
+		goto out;
+
+	ret = regmap_bulk_write(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+	if (ret)
+		goto out;
+
+	if (alarm->enabled) {
+		control |= DS3232_REG_CR_A1IE;
+		ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+	}
+out:
+	return ret;
+}
+
+static int ds3232_update_alarm(struct device *dev, unsigned int enabled)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control;
+	int ret;
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		return ret;
+
+	if (enabled)
+		/* enable alarm1 interrupt */
+		control |= DS3232_REG_CR_A1IE;
+	else
+		/* disable alarm1 interrupt */
+		control &= ~(DS3232_REG_CR_A1IE);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+
+	return ret;
+}
+
+/*
+ * Temperature sensor support for ds3232/ds3234 devices.
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every 64 seconds.
+ */
+static int ds3232_hwmon_read_temp(struct device *dev, long int *mC)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	u8 temp_buf[2];
+	s16 temp;
+	int ret;
+
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_TEMPERATURE, temp_buf,
+			       sizeof(temp_buf));
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Temperature is represented as a 10-bit code with a resolution of
+	 * 0.25 degree celsius and encoded in two's complement format.
+	 */
+	temp = (temp_buf[0] << 8) | temp_buf[1];
+	temp >>= 6;
+	*mC = temp * 250;
+
+	return 0;
+}
+
+static umode_t ds3232_hwmon_is_visible(const void *data,
+				       enum hwmon_sensor_types type,
+				       u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int ds3232_hwmon_read(struct device *dev,
+			     enum hwmon_sensor_types type,
+			     u32 attr, int channel, long *temp)
+{
+	int err;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		err = ds3232_hwmon_read_temp(dev, temp);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	return err;
+}
+
+static const struct hwmon_channel_info * const ds3232_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops ds3232_hwmon_hwmon_ops = {
+	.is_visible = ds3232_hwmon_is_visible,
+	.read = ds3232_hwmon_read,
+};
+
+static const struct hwmon_chip_info ds3232_hwmon_chip_info = {
+	.ops = &ds3232_hwmon_hwmon_ops,
+	.info = ds3232_hwmon_info,
+};
+
+static void ds3232_hwmon_register(struct device *dev, const char *name)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	struct device *hwmon_dev;
+
+	if (!IS_ENABLED(CONFIG_RTC_DRV_DS3232_HWMON))
+		return;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, name, ds3232,
+							&ds3232_hwmon_chip_info,
+							NULL);
+	if (IS_ERR(hwmon_dev)) {
+		dev_err(dev, "unable to register hwmon device %ld\n",
+			PTR_ERR(hwmon_dev));
+	}
+}
+
+static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (ds3232->irq <= 0)
+		return -EINVAL;
+
+	return ds3232_update_alarm(dev, enabled);
+}
+
+static irqreturn_t ds3232_irq(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret;
+	int stat, control;
+
+	rtc_lock(ds3232->rtc);
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto unlock;
+
+	if (stat & DS3232_REG_SR_A1F) {
+		ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+		if (ret) {
+			dev_warn(ds3232->dev,
+				 "Read Control Register error %d\n", ret);
+		} else {
+			/* disable alarm1 interrupt */
+			control &= ~(DS3232_REG_CR_A1IE);
+			ret = regmap_write(ds3232->regmap, DS3232_REG_CR,
+					   control);
+			if (ret) {
+				dev_warn(ds3232->dev,
+					 "Write Control Register error %d\n",
+					 ret);
+				goto unlock;
+			}
+
+			/* clear the alarm pend flag */
+			stat &= ~DS3232_REG_SR_A1F;
+			ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+			if (ret) {
+				dev_warn(ds3232->dev,
+					 "Write Status Register error %d\n",
+					 ret);
+				goto unlock;
+			}
+
+			rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
+		}
+	}
+
+unlock:
+	rtc_unlock(ds3232->rtc);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ds3232_rtc_ops = {
+	.read_time = ds3232_read_time,
+	.set_time = ds3232_set_time,
+	.read_alarm = ds3232_read_alarm,
+	.set_alarm = ds3232_set_alarm,
+	.alarm_irq_enable = ds3232_alarm_irq_enable,
+};
+
+static int ds3232_nvmem_read(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct regmap *ds3232_regmap = (struct regmap *)priv;
+
+	return regmap_bulk_read(ds3232_regmap, DS3232_REG_SRAM_START + offset,
+				val, bytes);
+}
+
+static int ds3232_nvmem_write(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	struct regmap *ds3232_regmap = (struct regmap *)priv;
+
+	return regmap_bulk_write(ds3232_regmap, DS3232_REG_SRAM_START + offset,
+				 val, bytes);
+}
+
+static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
+			const char *name)
+{
+	struct ds3232 *ds3232;
+	int ret;
+	struct nvmem_config nvmem_cfg = {
+		.name = "ds3232_sram",
+		.stride = 1,
+		.size = DS3232_REG_SRAM_SIZE,
+		.word_size = 1,
+		.reg_read = ds3232_nvmem_read,
+		.reg_write = ds3232_nvmem_write,
+		.priv = regmap,
+		.type = NVMEM_TYPE_BATTERY_BACKED
+	};
+
+	ds3232 = devm_kzalloc(dev, sizeof(*ds3232), GFP_KERNEL);
+	if (!ds3232)
+		return -ENOMEM;
+
+	ds3232->regmap = regmap;
+	ds3232->irq = irq;
+	ds3232->dev = dev;
+	dev_set_drvdata(dev, ds3232);
+
+	ret = ds3232_check_rtc_status(dev);
+	if (ret)
+		return ret;
+
+	if (ds3232->irq > 0)
+		device_init_wakeup(dev, true);
+
+	ds3232_hwmon_register(dev, name);
+
+	ds3232->rtc = devm_rtc_device_register(dev, name, &ds3232_rtc_ops,
+						THIS_MODULE);
+	if (IS_ERR(ds3232->rtc))
+		return PTR_ERR(ds3232->rtc);
+
+	ret = devm_rtc_nvmem_register(ds3232->rtc, &nvmem_cfg);
+	if(ret)
+		return ret;
+
+	if (ds3232->irq > 0) {
+		ret = devm_request_threaded_irq(dev, ds3232->irq, NULL,
+						ds3232_irq,
+						IRQF_SHARED | IRQF_ONESHOT,
+						name, dev);
+		if (ret) {
+			device_set_wakeup_capable(dev, 0);
+			ds3232->irq = 0;
+			dev_err(dev, "unable to request IRQ\n");
+		}
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_I2C)
+
+#ifdef CONFIG_PM_SLEEP
+static int ds3232_suspend(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (enable_irq_wake(ds3232->irq))
+			dev_warn_once(dev, "Cannot set wakeup source\n");
+	}
+
+	return 0;
+}
+
+static int ds3232_resume(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ds3232->irq);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops ds3232_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ds3232_suspend, ds3232_resume)
+};
+
+static int ds3232_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = DS3232_REG_SRAM_END,
+	};
+
+	regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return ds3232_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static const struct i2c_device_id ds3232_id[] = {
+	{ .name = "ds3232" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds3232_id);
+
+static const  __maybe_unused struct of_device_id ds3232_of_match[] = {
+	{ .compatible = "dallas,ds3232" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds3232_of_match);
+
+static struct i2c_driver ds3232_driver = {
+	.driver = {
+		.name = "rtc-ds3232",
+		.of_match_table = of_match_ptr(ds3232_of_match),
+		.pm	= &ds3232_pm_ops,
+	},
+	.probe = ds3232_i2c_probe,
+	.id_table = ds3232_id,
+};
+
+static int ds3232_register_driver(void)
+{
+	return i2c_add_driver(&ds3232_driver);
+}
+
+static void ds3232_unregister_driver(void)
+{
+	i2c_del_driver(&ds3232_driver);
+}
+
+#else
+
+static int ds3232_register_driver(void)
+{
+	return 0;
+}
+
+static void ds3232_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int ds3234_probe(struct spi_device *spi)
+{
+	int res;
+	unsigned int tmp;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = DS3232_REG_SRAM_END,
+		.write_flag_mask = 0x80,
+	};
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = regmap_read(regmap, DS3232_REG_SECONDS, &tmp);
+	if (res)
+		return res;
+
+	/* Control settings
+	 *
+	 * CONTROL_REG
+	 * BIT 7	6	5	4	3	2	1	0
+	 *     EOSC	BBSQW	CONV	RS2	RS1	INTCN	A2IE	A1IE
+	 *
+	 *     0	0	0	1	1	1	0	0
+	 *
+	 * CONTROL_STAT_REG
+	 * BIT 7	6	5	4	3	2	1	0
+	 *     OSF	BB32kHz	CRATE1	CRATE0	EN32kHz	BSY	A2F	A1F
+	 *
+	 *     1	0	0	0	1	0	0	0
+	 */
+	res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+	if (res)
+		return res;
+	res = regmap_write(regmap, DS3232_REG_CR, tmp & 0x1c);
+	if (res)
+		return res;
+
+	res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+	if (res)
+		return res;
+	res = regmap_write(regmap, DS3232_REG_SR, tmp & 0x88);
+	if (res)
+		return res;
+
+	/* Print our settings */
+	res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+	if (res)
+		return res;
+	dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp);
+
+	res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+	if (res)
+		return res;
+	dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp);
+
+	return ds3232_probe(&spi->dev, regmap, spi->irq, "ds3234");
+}
+
+static struct spi_driver ds3234_driver = {
+	.driver = {
+		.name	 = "ds3234",
+	},
+	.probe	 = ds3234_probe,
+};
+
+static int ds3234_register_driver(void)
+{
+	return spi_register_driver(&ds3234_driver);
+}
+
+static void ds3234_unregister_driver(void)
+{
+	spi_unregister_driver(&ds3234_driver);
+}
+
+#else
+
+static int ds3234_register_driver(void)
+{
+	return 0;
+}
+
+static void ds3234_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init ds323x_init(void)
+{
+	int ret;
+
+	ret = ds3232_register_driver();
+	if (ret) {
+		pr_err("Failed to register ds3232 driver: %d\n", ret);
+		return ret;
+	}
+
+	ret = ds3234_register_driver();
+	if (ret) {
+		pr_err("Failed to register ds3234 driver: %d\n", ret);
+		ds3232_unregister_driver();
+	}
+
+	return ret;
+}
+module_init(ds323x_init)
+
+static void __exit ds323x_exit(void)
+{
+	ds3234_unregister_driver();
+	ds3232_unregister_driver();
+}
+module_exit(ds323x_exit)
+
+MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
+MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS3232/DS3234 RTC Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ds3234");