diff options
| author | Adrian Betschart <adrian.betschart@cinemaone.ch> | 2026-09-11 17:13:14 +0200 |
|---|---|---|
| committer | Alex Deucher <alexander.deucher@amd.com> | 2026-10-01 17:18:05 -0400 |
| commit | 106b4a2a78b2a2f14885604891957b84bba502db (patch) | |
| tree | 5d40eef2428fb1a4791ab46a4b19091a5910eac2 /drivers/reset/starfive | |
| download | linux-stable-106b4a2a78b2a2f14885604891957b84bba502db.tar.gz linux-stable-106b4a2a78b2a2f14885604891957b84bba502db.zip | |
drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted
amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.
That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.
Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.
For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.
Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)
Diffstat (limited to 'drivers/reset/starfive')
| -rw-r--r-- | drivers/reset/starfive/Kconfig | 21 | ||||
| -rw-r--r-- | drivers/reset/starfive/Makefile | 5 | ||||
| -rw-r--r-- | drivers/reset/starfive/reset-starfive-jh7100.c | 73 | ||||
| -rw-r--r-- | drivers/reset/starfive/reset-starfive-jh7110.c | 103 | ||||
| -rw-r--r-- | drivers/reset/starfive/reset-starfive-jh71x0.c | 134 | ||||
| -rw-r--r-- | drivers/reset/starfive/reset-starfive-jh71x0.h | 14 |
6 files changed, 350 insertions, 0 deletions
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig new file mode 100644 index 000000000..d832339f6 --- /dev/null +++ b/drivers/reset/starfive/Kconfig @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config RESET_STARFIVE_JH71X0 + bool + +config RESET_STARFIVE_JH7100 + bool "StarFive JH7100 Reset Driver" + depends on ARCH_STARFIVE || COMPILE_TEST + select RESET_STARFIVE_JH71X0 + default ARCH_STARFIVE + help + This enables the reset controller driver for the StarFive JH7100 SoC. + +config RESET_STARFIVE_JH7110 + bool "StarFive JH7110 Reset Driver" + depends on CLK_STARFIVE_JH7110_SYS + select AUXILIARY_BUS + select RESET_STARFIVE_JH71X0 + default ARCH_STARFIVE + help + This enables the reset controller driver for the StarFive JH7110 SoC. diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile new file mode 100644 index 000000000..7a44b66fb --- /dev/null +++ b/drivers/reset/starfive/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o + +obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o +obj-$(CONFIG_RESET_STARFIVE_JH7110) += reset-starfive-jh7110.o diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c new file mode 100644 index 000000000..b178dc7d9 --- /dev/null +++ b/drivers/reset/starfive/reset-starfive-jh7100.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Reset driver for the StarFive JH7100 SoC + * + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +#include <linux/platform_device.h> + +#include "reset-starfive-jh71x0.h" + +#include <dt-bindings/reset/starfive-jh7100.h> + +/* register offsets */ +#define JH7100_RESET_ASSERT0 0x00 +#define JH7100_RESET_ASSERT1 0x04 +#define JH7100_RESET_ASSERT2 0x08 +#define JH7100_RESET_ASSERT3 0x0c +#define JH7100_RESET_STATUS0 0x10 +#define JH7100_RESET_STATUS1 0x14 +#define JH7100_RESET_STATUS2 0x18 +#define JH7100_RESET_STATUS3 0x1c + +/* + * Writing a 1 to the n'th bit of the m'th ASSERT register asserts + * line 32m + n, and writing a 0 deasserts the same line. + * Most reset lines have their status inverted so a 0 bit in the STATUS + * register means the line is asserted and a 1 means it's deasserted. A few + * lines don't though, so store the expected value of the status registers when + * all lines are asserted. + */ +static const u32 jh7100_reset_asserted[4] = { + /* STATUS0 */ + BIT(JH7100_RST_U74 % 32) | + BIT(JH7100_RST_VP6_DRESET % 32) | + BIT(JH7100_RST_VP6_BRESET % 32), + /* STATUS1 */ + BIT(JH7100_RST_HIFI4_DRESET % 32) | + BIT(JH7100_RST_HIFI4_BRESET % 32), + /* STATUS2 */ + BIT(JH7100_RST_E24 % 32), + /* STATUS3 */ + 0, +}; + +static int __init jh7100_reset_probe(struct platform_device *pdev) +{ + void __iomem *base = devm_platform_ioremap_resource(pdev, 0); + + if (IS_ERR(base)) + return PTR_ERR(base); + + return reset_starfive_jh71x0_register(&pdev->dev, pdev->dev.of_node, + base + JH7100_RESET_ASSERT0, + base + JH7100_RESET_STATUS0, + jh7100_reset_asserted, + JH7100_RSTN_END, + THIS_MODULE); +} + +static const struct of_device_id jh7100_reset_dt_ids[] = { + { .compatible = "starfive,jh7100-reset" }, + { /* sentinel */ } +}; + +static struct platform_driver jh7100_reset_driver = { + .driver = { + .name = "jh7100-reset", + .of_match_table = jh7100_reset_dt_ids, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver_probe(jh7100_reset_driver, jh7100_reset_probe); diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c new file mode 100644 index 000000000..29a43f0f2 --- /dev/null +++ b/drivers/reset/starfive/reset-starfive-jh7110.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Reset driver for the StarFive JH7110 SoC + * + * Copyright (C) 2022 StarFive Technology Co., Ltd. + */ + +#include <linux/auxiliary_bus.h> + +#include <soc/starfive/reset-starfive-jh71x0.h> + +#include "reset-starfive-jh71x0.h" + +#include <dt-bindings/reset/starfive,jh7110-crg.h> + +struct jh7110_reset_info { + unsigned int nr_resets; + unsigned int assert_offset; + unsigned int status_offset; +}; + +static const struct jh7110_reset_info jh7110_sys_info = { + .nr_resets = JH7110_SYSRST_END, + .assert_offset = 0x2F8, + .status_offset = 0x308, +}; + +static const struct jh7110_reset_info jh7110_aon_info = { + .nr_resets = JH7110_AONRST_END, + .assert_offset = 0x38, + .status_offset = 0x3C, +}; + +static const struct jh7110_reset_info jh7110_stg_info = { + .nr_resets = JH7110_STGRST_END, + .assert_offset = 0x74, + .status_offset = 0x78, +}; + +static const struct jh7110_reset_info jh7110_isp_info = { + .nr_resets = JH7110_ISPRST_END, + .assert_offset = 0x38, + .status_offset = 0x3C, +}; + +static const struct jh7110_reset_info jh7110_vout_info = { + .nr_resets = JH7110_VOUTRST_END, + .assert_offset = 0x48, + .status_offset = 0x4C, +}; + +static int jh7110_reset_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct jh7110_reset_info *info = (struct jh7110_reset_info *)(id->driver_data); + struct jh71x0_reset_adev *rdev = to_jh71x0_reset_adev(adev); + void __iomem *base = rdev->base; + + if (!info || !base) + return -ENODEV; + + return reset_starfive_jh71x0_register(&adev->dev, adev->dev.parent->of_node, + base + info->assert_offset, + base + info->status_offset, + NULL, + info->nr_resets, + NULL); +} + +static const struct auxiliary_device_id jh7110_reset_ids[] = { + { + .name = "clk_starfive_jh7110_sys.rst-sys", + .driver_data = (kernel_ulong_t)&jh7110_sys_info, + }, + { + .name = "clk_starfive_jh7110_sys.rst-aon", + .driver_data = (kernel_ulong_t)&jh7110_aon_info, + }, + { + .name = "clk_starfive_jh7110_sys.rst-stg", + .driver_data = (kernel_ulong_t)&jh7110_stg_info, + }, + { + .name = "clk_starfive_jh7110_sys.rst-isp", + .driver_data = (kernel_ulong_t)&jh7110_isp_info, + }, + { + .name = "clk_starfive_jh7110_sys.rst-vo", + .driver_data = (kernel_ulong_t)&jh7110_vout_info, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(auxiliary, jh7110_reset_ids); + +static struct auxiliary_driver jh7110_reset_driver = { + .probe = jh7110_reset_probe, + .id_table = jh7110_reset_ids, +}; +module_auxiliary_driver(jh7110_reset_driver); + +MODULE_AUTHOR("Hal Feng <hal.feng@starfivetech.com>"); +MODULE_DESCRIPTION("StarFive JH7110 reset driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.c b/drivers/reset/starfive/reset-starfive-jh71x0.c new file mode 100644 index 000000000..29ce34867 --- /dev/null +++ b/drivers/reset/starfive/reset-starfive-jh71x0.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Reset driver for the StarFive JH71X0 SoCs + * + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +#include <linux/bitmap.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/reset-controller.h> +#include <linux/spinlock.h> + +#include "reset-starfive-jh71x0.h" + +struct jh71x0_reset { + struct reset_controller_dev rcdev; + /* protect registers against concurrent read-modify-write */ + spinlock_t lock; + void __iomem *assert; + void __iomem *status; + const u32 *asserted; +}; + +static inline struct jh71x0_reset * +jh71x0_reset_from(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct jh71x0_reset, rcdev); +} + +static int jh71x0_reset_update(struct reset_controller_dev *rcdev, + unsigned long id, bool assert) +{ + struct jh71x0_reset *data = jh71x0_reset_from(rcdev); + unsigned long offset = id / 32; + u32 mask = BIT(id % 32); + void __iomem *reg_assert = data->assert + offset * sizeof(u32); + void __iomem *reg_status = data->status + offset * sizeof(u32); + u32 done = data->asserted ? data->asserted[offset] & mask : 0; + u32 value; + unsigned long flags; + int ret; + + if (!assert) + done ^= mask; + + spin_lock_irqsave(&data->lock, flags); + + value = readl(reg_assert); + if (assert) + value |= mask; + else + value &= ~mask; + writel(value, reg_assert); + + /* if the associated clock is gated, deasserting might otherwise hang forever */ + ret = readl_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000); + + spin_unlock_irqrestore(&data->lock, flags); + return ret; +} + +static int jh71x0_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return jh71x0_reset_update(rcdev, id, true); +} + +static int jh71x0_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return jh71x0_reset_update(rcdev, id, false); +} + +static int jh71x0_reset_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + int ret; + + ret = jh71x0_reset_assert(rcdev, id); + if (ret) + return ret; + + return jh71x0_reset_deassert(rcdev, id); +} + +static int jh71x0_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct jh71x0_reset *data = jh71x0_reset_from(rcdev); + unsigned long offset = id / 32; + u32 mask = BIT(id % 32); + void __iomem *reg_status = data->status + offset * sizeof(u32); + u32 value = readl(reg_status); + + if (!data->asserted) + return !(value & mask); + + return !((value ^ data->asserted[offset]) & mask); +} + +static const struct reset_control_ops jh71x0_reset_ops = { + .assert = jh71x0_reset_assert, + .deassert = jh71x0_reset_deassert, + .reset = jh71x0_reset_reset, + .status = jh71x0_reset_status, +}; + +int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node, + void __iomem *assert, void __iomem *status, + const u32 *asserted, unsigned int nr_resets, + struct module *owner) +{ + struct jh71x0_reset *data; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->rcdev.ops = &jh71x0_reset_ops; + data->rcdev.owner = owner; + data->rcdev.nr_resets = nr_resets; + data->rcdev.dev = dev; + data->rcdev.of_node = of_node; + + spin_lock_init(&data->lock); + data->assert = assert; + data->status = status; + data->asserted = asserted; + + return devm_reset_controller_register(dev, &data->rcdev); +} +EXPORT_SYMBOL_GPL(reset_starfive_jh71x0_register); diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h new file mode 100644 index 000000000..db7d39a87 --- /dev/null +++ b/drivers/reset/starfive/reset-starfive-jh71x0.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +#ifndef __RESET_STARFIVE_JH71X0_H +#define __RESET_STARFIVE_JH71X0_H + +int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node, + void __iomem *assert, void __iomem *status, + const u32 *asserted, unsigned int nr_resets, + struct module *owner); + +#endif /* __RESET_STARFIVE_JH71X0_H */ |
