drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 228 insertions, 0 deletions

diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
new file mode 100644
index 000000000..23f86ddb8
--- /dev/null
+++ b/drivers/reset/reset-ti-syscon.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI SYSCON regmap reset driver
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *	Suman Anna <afd@ti.com>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/**
+ * struct ti_syscon_reset_control - reset control structure
+ * @assert_offset: reset assert control register offset from syscon base
+ * @assert_bit: reset assert bit in the reset assert control register
+ * @deassert_offset: reset deassert control register offset from syscon base
+ * @deassert_bit: reset deassert bit in the reset deassert control register
+ * @status_offset: reset status register offset from syscon base
+ * @status_bit: reset status bit in the reset status register
+ * @flags: reset flag indicating how the (de)assert and status are handled
+ */
+struct ti_syscon_reset_control {
+	unsigned int assert_offset;
+	unsigned int assert_bit;
+	unsigned int deassert_offset;
+	unsigned int deassert_bit;
+	unsigned int status_offset;
+	unsigned int status_bit;
+	u32 flags;
+};
+
+/**
+ * struct ti_syscon_reset_data - reset controller information structure
+ * @rcdev: reset controller entity
+ * @regmap: regmap handle containing the memory-mapped reset registers
+ * @controls: array of reset controls
+ * @nr_controls: number of controls in control array
+ */
+struct ti_syscon_reset_data {
+	struct reset_controller_dev rcdev;
+	struct regmap *regmap;
+	struct ti_syscon_reset_control *controls;
+	unsigned int nr_controls;
+};
+
+#define to_ti_syscon_reset_data(_rcdev)	\
+	container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
+
+/**
+ * ti_syscon_reset_assert() - assert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be asserted
+ *
+ * This function implements the reset driver op to assert a device's reset.
+ * This asserts the reset in a manner prescribed by the reset flags.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
+	struct ti_syscon_reset_control *control;
+	unsigned int mask, value;
+
+	if (id >= data->nr_controls)
+		return -EINVAL;
+
+	control = &data->controls[id];
+
+	if (control->flags & ASSERT_NONE)
+		return -ENOTSUPP; /* assert not supported for this reset */
+
+	mask = BIT(control->assert_bit);
+	value = (control->flags & ASSERT_SET) ? mask : 0x0;
+
+	return regmap_write_bits(data->regmap, control->assert_offset, mask, value);
+}
+
+/**
+ * ti_syscon_reset_deassert() - deassert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of reset to be deasserted
+ *
+ * This function implements the reset driver op to deassert a device's reset.
+ * This deasserts the reset in a manner prescribed by the reset flags.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev,
+				    unsigned long id)
+{
+	struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
+	struct ti_syscon_reset_control *control;
+	unsigned int mask, value;
+
+	if (id >= data->nr_controls)
+		return -EINVAL;
+
+	control = &data->controls[id];
+
+	if (control->flags & DEASSERT_NONE)
+		return -ENOTSUPP; /* deassert not supported for this reset */
+
+	mask = BIT(control->deassert_bit);
+	value = (control->flags & DEASSERT_SET) ? mask : 0x0;
+
+	return regmap_write_bits(data->regmap, control->deassert_offset, mask, value);
+}
+
+/**
+ * ti_syscon_reset_status() - check device reset status
+ * @rcdev: reset controller entity
+ * @id: ID of the reset for which the status is being requested
+ *
+ * This function implements the reset driver op to return the status of a
+ * device's reset.
+ *
+ * Return: 0 if reset is deasserted, true if reset is asserted, else a
+ * corresponding error value
+ */
+static int ti_syscon_reset_status(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
+	struct ti_syscon_reset_control *control;
+	unsigned int reset_state;
+	int ret;
+
+	if (id >= data->nr_controls)
+		return -EINVAL;
+
+	control = &data->controls[id];
+
+	if (control->flags & STATUS_NONE)
+		return -ENOTSUPP; /* status not supported for this reset */
+
+	ret = regmap_read(data->regmap, control->status_offset, &reset_state);
+	if (ret)
+		return ret;
+
+	return !(reset_state & BIT(control->status_bit)) ==
+		!(control->flags & STATUS_SET);
+}
+
+static const struct reset_control_ops ti_syscon_reset_ops = {
+	.assert		= ti_syscon_reset_assert,
+	.deassert	= ti_syscon_reset_deassert,
+	.status		= ti_syscon_reset_status,
+};
+
+static int ti_syscon_reset_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ti_syscon_reset_data *data;
+	struct regmap *regmap;
+	const __be32 *list;
+	struct ti_syscon_reset_control *controls;
+	int size, nr_controls, i;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	list = of_get_property(np, "ti,reset-bits", &size);
+	if (!list || (size / sizeof(*list)) % 7 != 0) {
+		dev_err(dev, "invalid DT reset description\n");
+		return -EINVAL;
+	}
+
+	nr_controls = (size / sizeof(*list)) / 7;
+	controls = devm_kcalloc(dev, nr_controls, sizeof(*controls),
+				GFP_KERNEL);
+	if (!controls)
+		return -ENOMEM;
+
+	for (i = 0; i < nr_controls; i++) {
+		controls[i].assert_offset = be32_to_cpup(list++);
+		controls[i].assert_bit = be32_to_cpup(list++);
+		controls[i].deassert_offset = be32_to_cpup(list++);
+		controls[i].deassert_bit = be32_to_cpup(list++);
+		controls[i].status_offset = be32_to_cpup(list++);
+		controls[i].status_bit = be32_to_cpup(list++);
+		controls[i].flags = be32_to_cpup(list++);
+	}
+
+	data->rcdev.ops = &ti_syscon_reset_ops;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.of_node = np;
+	data->rcdev.nr_resets = nr_controls;
+	data->regmap = regmap;
+	data->controls = controls;
+	data->nr_controls = nr_controls;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id ti_syscon_reset_of_match[] = {
+	{ .compatible = "ti,syscon-reset", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_syscon_reset_of_match);
+
+static struct platform_driver ti_syscon_reset_driver = {
+	.probe = ti_syscon_reset_probe,
+	.driver = {
+		.name = "ti-syscon-reset",
+		.of_match_table = ti_syscon_reset_of_match,
+	},
+};
+module_platform_driver(ti_syscon_reset_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
+MODULE_DESCRIPTION("TI SYSCON Regmap Reset Driver");
+MODULE_LICENSE("GPL v2");