Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 259 insertions, 0 deletions

diff --git a/drivers/reset/reset-ti-sci.c b/drivers/reset/reset-ti-sci.c
new file mode 100644
index 000000000..1dc5b766a
--- /dev/null
+++ b/drivers/reset/reset-ti-sci.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Texas Instrument's System Control Interface (TI-SCI) reset driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_reset_control - reset control structure
+ * @dev_id: SoC-specific device identifier
+ * @reset_mask: reset mask to use for toggling reset
+ * @lock: synchronize reset_mask read-modify-writes
+ */
+struct ti_sci_reset_control {
+	u32 dev_id;
+	u32 reset_mask;
+	struct mutex lock;
+};
+
+/**
+ * struct ti_sci_reset_data - reset controller information structure
+ * @rcdev: reset controller entity
+ * @dev: reset controller device pointer
+ * @sci: TI SCI handle used for communication with system controller
+ * @idr: idr structure for mapping ids to reset control structures
+ */
+struct ti_sci_reset_data {
+	struct reset_controller_dev rcdev;
+	struct device *dev;
+	const struct ti_sci_handle *sci;
+	struct idr idr;
+};
+
+#define to_ti_sci_reset_data(p)	\
+	container_of((p), struct ti_sci_reset_data, rcdev)
+
+/**
+ * ti_sci_reset_set() - program a device's reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to toggle
+ * @assert: boolean flag to indicate assert or deassert
+ *
+ * This is a common internal function used to assert or deassert a device's
+ * reset using the TI SCI protocol. The device's reset is asserted if the
+ * @assert argument is true, or deasserted if @assert argument is false.
+ * The mechanism itself is a read-modify-write procedure, the current device
+ * reset register is read using a TI SCI device operation, the new value is
+ * set or un-set using the reset's mask, and the new reset value written by
+ * using another TI SCI device operation.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_set(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
+	struct ti_sci_reset_control *control;
+	u32 reset_state;
+	int ret;
+
+	control = idr_find(&data->idr, id);
+	if (!control)
+		return -EINVAL;
+
+	mutex_lock(&control->lock);
+
+	ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
+	if (ret)
+		goto out;
+
+	if (assert)
+		reset_state |= control->reset_mask;
+	else
+		reset_state &= ~control->reset_mask;
+
+	ret = dev_ops->set_device_resets(sci, control->dev_id, reset_state);
+out:
+	mutex_unlock(&control->lock);
+
+	return ret;
+}
+
+/**
+ * ti_sci_reset_assert() - assert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be asserted
+ *
+ * This function implements the reset driver op to assert a device's reset
+ * using the TI SCI protocol. This invokes the function ti_sci_reset_set()
+ * with the corresponding parameters as passed in, but with the @assert
+ * argument set to true for asserting the reset.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return ti_sci_reset_set(rcdev, id, true);
+}
+
+/**
+ * ti_sci_reset_deassert() - deassert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be deasserted
+ *
+ * This function implements the reset driver op to deassert a device's reset
+ * using the TI SCI protocol. This invokes the function ti_sci_reset_set()
+ * with the corresponding parameters as passed in, but with the @assert
+ * argument set to false for deasserting the reset.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return ti_sci_reset_set(rcdev, id, false);
+}
+
+/**
+ * ti_sci_reset_status() - check device reset status
+ * @rcdev: reset controller entity
+ * @id: ID of reset to be checked
+ *
+ * This function implements the reset driver op to return the status of a
+ * device's reset using the TI SCI protocol. The reset register value is read
+ * by invoking the TI SCI device operation .get_device_resets(), and the
+ * status of the specific reset is extracted and returned using this reset's
+ * reset mask.
+ *
+ * Return: 0 if reset is deasserted, or a non-zero value if reset is asserted
+ */
+static int ti_sci_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
+	struct ti_sci_reset_control *control;
+	u32 reset_state;
+	int ret;
+
+	control = idr_find(&data->idr, id);
+	if (!control)
+		return -EINVAL;
+
+	ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
+	if (ret)
+		return ret;
+
+	return reset_state & control->reset_mask;
+}
+
+static const struct reset_control_ops ti_sci_reset_ops = {
+	.assert		= ti_sci_reset_assert,
+	.deassert	= ti_sci_reset_deassert,
+	.status		= ti_sci_reset_status,
+};
+
+/**
+ * ti_sci_reset_of_xlate() - translate a set of OF arguments to a reset ID
+ * @rcdev: reset controller entity
+ * @reset_spec: OF reset argument specifier
+ *
+ * This function performs the translation of the reset argument specifier
+ * values defined in a reset consumer device node. The function allocates a
+ * reset control structure for that device reset, and will be used by the
+ * driver for performing any reset functions on that reset. An idr structure
+ * is allocated and used to map to the reset control structure. This idr
+ * is used by the driver to do reset lookups.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_of_xlate(struct reset_controller_dev *rcdev,
+				 const struct of_phandle_args *reset_spec)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	struct ti_sci_reset_control *control;
+
+	if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+		return -EINVAL;
+
+	control = devm_kzalloc(data->dev, sizeof(*control), GFP_KERNEL);
+	if (!control)
+		return -ENOMEM;
+
+	control->dev_id = reset_spec->args[0];
+	control->reset_mask = reset_spec->args[1];
+	mutex_init(&control->lock);
+
+	return idr_alloc(&data->idr, control, 0, 0, GFP_KERNEL);
+}
+
+static const struct of_device_id ti_sci_reset_of_match[] = {
+	{ .compatible = "ti,sci-reset", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_reset_of_match);
+
+static int ti_sci_reset_probe(struct platform_device *pdev)
+{
+	struct ti_sci_reset_data *data;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->sci = devm_ti_sci_get_handle(&pdev->dev);
+	if (IS_ERR(data->sci))
+		return PTR_ERR(data->sci);
+
+	data->rcdev.ops = &ti_sci_reset_ops;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.of_node = pdev->dev.of_node;
+	data->rcdev.of_reset_n_cells = 2;
+	data->rcdev.of_xlate = ti_sci_reset_of_xlate;
+	data->dev = &pdev->dev;
+	idr_init(&data->idr);
+
+	platform_set_drvdata(pdev, data);
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static void ti_sci_reset_remove(struct platform_device *pdev)
+{
+	struct ti_sci_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	idr_destroy(&data->idr);
+}
+
+static struct platform_driver ti_sci_reset_driver = {
+	.probe = ti_sci_reset_probe,
+	.remove = ti_sci_reset_remove,
+	.driver = {
+		.name = "ti-sci-reset",
+		.of_match_table = ti_sci_reset_of_match,
+	},
+};
+module_platform_driver(ti_sci_reset_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TI System Control Interface (TI SCI) Reset driver");
+MODULE_LICENSE("GPL v2");