kbuild: rust: keep Rust objects out of Clang LTO with inline helpersgrafted

Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit
`objtool` errors such as:

    vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a:
    can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd

The reason is that in such builds, the Clang invocation that compiles
the combined Rust plus helpers bitcode emits LLVM bitcode (again) --
the final code generation happens in the linker's LTO step, which the
`-mllvm` trap options passed to Clang do not reach.

This, in turn, means that unreachable traps are missing, and the
impossible paths do not merely fallthrough to the next symbol, but past
the end of their own section, since LTO builds place each function in
its own section.

Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always
emits machine code directly, with the traps in place.

Assisted-by: LLM
Cc: Gary Guo <gary@garyguo.net>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust")
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

1 files changed, 122 insertions, 0 deletions

diff --git a/drivers/reset/reset-raspberrypi.c b/drivers/reset/reset-raspberrypi.c
new file mode 100644
index 000000000..fa23db554
--- /dev/null
+++ b/drivers/reset/reset-raspberrypi.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Raspberry Pi 4 firmware reset driver
+ *
+ * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+struct rpi_reset {
+	struct reset_controller_dev rcdev;
+	struct rpi_firmware *fw;
+};
+
+static inline struct rpi_reset *to_rpi(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct rpi_reset, rcdev);
+}
+
+static int rpi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct rpi_reset *priv = to_rpi(rcdev);
+	u32 dev_addr;
+	int ret;
+
+	switch (id) {
+	case RASPBERRYPI_FIRMWARE_RESET_ID_USB:
+		/*
+		 * The Raspberry Pi 4 gets its USB functionality from VL805, a
+		 * PCIe chip that implements xHCI. After a PCI reset, VL805's
+		 * firmware may either be loaded directly from an EEPROM or, if
+		 * not present, by the SoC's co-processor, VideoCore. rpi's
+		 * VideoCore OS contains both the non public firmware load
+		 * logic and the VL805 firmware blob. This triggers the
+		 * aforementioned process.
+		 *
+		 * The pci device address is expected is expected by the
+		 * firmware encoded like this:
+		 *
+		 *	PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12
+		 *
+		 * But since rpi's PCIe is hardwired, we know the address in
+		 * advance.
+		 */
+		dev_addr = 0x100000;
+		ret = rpi_firmware_property(priv->fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
+					    &dev_addr, sizeof(dev_addr));
+		if (ret)
+			return ret;
+
+		/* Wait for vl805 to startup */
+		usleep_range(200, 1000);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct reset_control_ops rpi_reset_ops = {
+	.reset	= rpi_reset_reset,
+};
+
+static int rpi_reset_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rpi_firmware *fw;
+	struct device_node *np;
+	struct rpi_reset *priv;
+
+	np = of_get_parent(dev->of_node);
+	if (!np) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	fw = devm_rpi_firmware_get(&pdev->dev, np);
+	of_node_put(np);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+
+	priv->fw = fw;
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.nr_resets = RASPBERRYPI_FIRMWARE_RESET_NUM_IDS;
+	priv->rcdev.ops = &rpi_reset_ops;
+	priv->rcdev.of_node = dev->of_node;
+
+	return devm_reset_controller_register(dev, &priv->rcdev);
+}
+
+static const struct of_device_id rpi_reset_of_match[] = {
+	{ .compatible = "raspberrypi,firmware-reset" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rpi_reset_of_match);
+
+static struct platform_driver rpi_reset_driver = {
+	.probe	= rpi_reset_probe,
+	.driver	= {
+		.name = "raspberrypi-reset",
+		.of_match_table = rpi_reset_of_match,
+	},
+};
+module_platform_driver(rpi_reset_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Raspberry Pi 4 firmware reset driver");
+MODULE_LICENSE("GPL");