diff options
| author | Ali Ahmet Memis <ali@iusegentoo.com> | 2026-08-21 01:45:27 +0000 |
|---|---|---|
| committer | Stafford Horne <shorne@gmail.com> | 2026-08-29 07:32:26 +0100 |
| commit | 78004e9a87f240df03e2f73120d291763c32e0a7 (patch) | |
| tree | 137c22dd795222931b9d2bf2501d37cd766741aa /drivers/reset/reset-gpio.c | |
| download | linux-stable-78004e9a87f240df03e2f73120d291763c32e0a7.tar.gz linux-stable-78004e9a87f240df03e2f73120d291763c32e0a7.zip | |
openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.
Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.
[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Diffstat (limited to 'drivers/reset/reset-gpio.c')
| -rw-r--r-- | drivers/reset/reset-gpio.c | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/drivers/reset/reset-gpio.c b/drivers/reset/reset-gpio.c new file mode 100644 index 000000000..bf95296a5 --- /dev/null +++ b/drivers/reset/reset-gpio.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/auxiliary_bus.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/reset-controller.h> + +struct reset_gpio_priv { + struct reset_controller_dev rc; + struct gpio_desc *reset; +}; + +static inline struct reset_gpio_priv +*rc_to_reset_gpio(struct reset_controller_dev *rc) +{ + return container_of(rc, struct reset_gpio_priv, rc); +} + +static int reset_gpio_assert(struct reset_controller_dev *rc, unsigned long id) +{ + struct reset_gpio_priv *priv = rc_to_reset_gpio(rc); + + return gpiod_set_value_cansleep(priv->reset, 1); +} + +static int reset_gpio_deassert(struct reset_controller_dev *rc, + unsigned long id) +{ + struct reset_gpio_priv *priv = rc_to_reset_gpio(rc); + + return gpiod_set_value_cansleep(priv->reset, 0); +} + +static int reset_gpio_status(struct reset_controller_dev *rc, unsigned long id) +{ + struct reset_gpio_priv *priv = rc_to_reset_gpio(rc); + + return gpiod_get_value_cansleep(priv->reset); +} + +static const struct reset_control_ops reset_gpio_ops = { + .assert = reset_gpio_assert, + .deassert = reset_gpio_deassert, + .status = reset_gpio_status, +}; + +static int reset_gpio_fwnode_xlate(struct reset_controller_dev *rcdev, + const struct fwnode_reference_args *reset_spec) +{ + return reset_spec->args[0]; +} + +static int reset_gpio_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct device *dev = &adev->dev; + struct reset_gpio_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset)) + return dev_err_probe(dev, PTR_ERR(priv->reset), + "Could not get reset gpios\n"); + + priv->rc.ops = &reset_gpio_ops; + priv->rc.owner = THIS_MODULE; + priv->rc.dev = dev; + + /* Cells to match GPIO specifier, but it's not really used */ + priv->rc.fwnode_reset_n_cells = 2; + priv->rc.fwnode_xlate = reset_gpio_fwnode_xlate; + priv->rc.nr_resets = 1; + + return devm_reset_controller_register(dev, &priv->rc); +} + +static const struct auxiliary_device_id reset_gpio_ids[] = { + { .name = "reset.gpio" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, reset_gpio_ids); + +static struct auxiliary_driver reset_gpio_driver = { + .probe = reset_gpio_probe, + .id_table = reset_gpio_ids, + .driver = { + .name = "reset-gpio", + .suppress_bind_attrs = true, + }, +}; +module_auxiliary_driver(reset_gpio_driver); + +MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>"); +MODULE_DESCRIPTION("Generic GPIO reset driver"); +MODULE_LICENSE("GPL"); |
