staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 126 insertions, 0 deletions

diff --git a/drivers/reset/reset-brcmstb.c b/drivers/reset/reset-brcmstb.c
new file mode 100644
index 000000000..810fe7645
--- /dev/null
+++ b/drivers/reset/reset-brcmstb.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom STB generic reset controller for SW_INIT style reset controller
+ *
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ * Copyright (C) 2018 Broadcom
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/types.h>
+
+struct brcmstb_reset {
+	void __iomem *base;
+	struct reset_controller_dev rcdev;
+};
+
+#define SW_INIT_SET		0x00
+#define SW_INIT_CLEAR		0x04
+#define SW_INIT_STATUS		0x08
+
+#define SW_INIT_BIT(id)		BIT((id) & 0x1f)
+#define SW_INIT_BANK(id)	((id) >> 5)
+
+/* A full bank contains extra registers that we are not utilizing but still
+ * qualify as a single bank.
+ */
+#define SW_INIT_BANK_SIZE	0x18
+
+static inline
+struct brcmstb_reset *to_brcmstb(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct brcmstb_reset, rcdev);
+}
+
+static int brcmstb_reset_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
+	struct brcmstb_reset *priv = to_brcmstb(rcdev);
+
+	writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_SET);
+
+	return 0;
+}
+
+static int brcmstb_reset_deassert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
+	struct brcmstb_reset *priv = to_brcmstb(rcdev);
+
+	writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_CLEAR);
+	/* Maximum reset delay after de-asserting a line and seeing block
+	 * operation is typically 14us for the worst case, build some slack
+	 * here.
+	 */
+	usleep_range(100, 200);
+
+	return 0;
+}
+
+static int brcmstb_reset_status(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
+	struct brcmstb_reset *priv = to_brcmstb(rcdev);
+
+	return readl_relaxed(priv->base + off + SW_INIT_STATUS) &
+			     SW_INIT_BIT(id);
+}
+
+static const struct reset_control_ops brcmstb_reset_ops = {
+	.assert	= brcmstb_reset_assert,
+	.deassert = brcmstb_reset_deassert,
+	.status = brcmstb_reset_status,
+};
+
+static int brcmstb_reset_probe(struct platform_device *pdev)
+{
+	struct device *kdev = &pdev->dev;
+	struct brcmstb_reset *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(kdev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	dev_set_drvdata(kdev, priv);
+
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.nr_resets = DIV_ROUND_DOWN_ULL(resource_size(res),
+						   SW_INIT_BANK_SIZE) * 32;
+	priv->rcdev.ops = &brcmstb_reset_ops;
+	priv->rcdev.of_node = kdev->of_node;
+	/* Use defaults: 1 cell and simple xlate function */
+
+	return devm_reset_controller_register(kdev, &priv->rcdev);
+}
+
+static const struct of_device_id brcmstb_reset_of_match[] = {
+	{ .compatible = "brcm,brcmstb-reset" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, brcmstb_reset_of_match);
+
+static struct platform_driver brcmstb_reset_driver = {
+	.probe	= brcmstb_reset_probe,
+	.driver	= {
+		.name = "brcmstb-reset",
+		.of_match_table = brcmstb_reset_of_match,
+	},
+};
+module_platform_driver(brcmstb_reset_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom STB reset controller");
+MODULE_LICENSE("GPL");