staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 111 insertions, 0 deletions

diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c
new file mode 100644
index 000000000..578fe8670
--- /dev/null
+++ b/drivers/reset/reset-berlin.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Marvell Berlin reset driver
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define BERLIN_MAX_RESETS	32
+
+#define to_berlin_reset_priv(p)		\
+	container_of((p), struct berlin_reset_priv, rcdev)
+
+struct berlin_reset_priv {
+	struct regmap			*regmap;
+	struct reset_controller_dev	rcdev;
+};
+
+static int berlin_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
+	int offset = id >> 8;
+	int mask = BIT(id & 0x1f);
+
+	regmap_write(priv->regmap, offset, mask);
+
+	/* let the reset be effective */
+	udelay(10);
+
+	return 0;
+}
+
+static const struct reset_control_ops berlin_reset_ops = {
+	.reset	= berlin_reset_reset,
+};
+
+static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
+			      const struct of_phandle_args *reset_spec)
+{
+	unsigned int offset, bit;
+
+	offset = reset_spec->args[0];
+	bit = reset_spec->args[1];
+
+	if (bit >= BERLIN_MAX_RESETS)
+		return -EINVAL;
+
+	return (offset << 8) | bit;
+}
+
+static int berlin2_reset_probe(struct platform_device *pdev)
+{
+	struct device_node *parent_np;
+	struct berlin_reset_priv *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	parent_np = of_get_parent(pdev->dev.of_node);
+	priv->regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.ops = &berlin_reset_ops;
+	priv->rcdev.of_node = pdev->dev.of_node;
+	priv->rcdev.of_reset_n_cells = 2;
+	priv->rcdev.of_xlate = berlin_reset_xlate;
+
+	return reset_controller_register(&priv->rcdev);
+}
+
+static const struct of_device_id berlin_reset_dt_match[] = {
+	{ .compatible = "marvell,berlin2-reset" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
+
+static struct platform_driver berlin_reset_driver = {
+	.probe	= berlin2_reset_probe,
+	.driver	= {
+		.name = "berlin2-reset",
+		.of_match_table = berlin_reset_dt_match,
+	},
+};
+module_platform_driver(berlin_reset_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Synaptics Berlin reset controller");
+MODULE_LICENSE("GPL");