drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 111 insertions, 0 deletions

diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c
new file mode 100644
index 000000000..578fe8670
--- /dev/null
+++ b/drivers/reset/reset-berlin.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Marvell Berlin reset driver
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define BERLIN_MAX_RESETS	32
+
+#define to_berlin_reset_priv(p)		\
+	container_of((p), struct berlin_reset_priv, rcdev)
+
+struct berlin_reset_priv {
+	struct regmap			*regmap;
+	struct reset_controller_dev	rcdev;
+};
+
+static int berlin_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
+	int offset = id >> 8;
+	int mask = BIT(id & 0x1f);
+
+	regmap_write(priv->regmap, offset, mask);
+
+	/* let the reset be effective */
+	udelay(10);
+
+	return 0;
+}
+
+static const struct reset_control_ops berlin_reset_ops = {
+	.reset	= berlin_reset_reset,
+};
+
+static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
+			      const struct of_phandle_args *reset_spec)
+{
+	unsigned int offset, bit;
+
+	offset = reset_spec->args[0];
+	bit = reset_spec->args[1];
+
+	if (bit >= BERLIN_MAX_RESETS)
+		return -EINVAL;
+
+	return (offset << 8) | bit;
+}
+
+static int berlin2_reset_probe(struct platform_device *pdev)
+{
+	struct device_node *parent_np;
+	struct berlin_reset_priv *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	parent_np = of_get_parent(pdev->dev.of_node);
+	priv->regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.ops = &berlin_reset_ops;
+	priv->rcdev.of_node = pdev->dev.of_node;
+	priv->rcdev.of_reset_n_cells = 2;
+	priv->rcdev.of_xlate = berlin_reset_xlate;
+
+	return reset_controller_register(&priv->rcdev);
+}
+
+static const struct of_device_id berlin_reset_dt_match[] = {
+	{ .compatible = "marvell,berlin2-reset" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
+
+static struct platform_driver berlin_reset_driver = {
+	.probe	= berlin2_reset_probe,
+	.driver	= {
+		.name = "berlin2-reset",
+		.of_match_table = berlin_reset_dt_match,
+	},
+};
+module_platform_driver(berlin_reset_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Synaptics Berlin reset controller");
+MODULE_LICENSE("GPL");