drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 253 insertions, 0 deletions

diff --git a/drivers/reset/reset-aspeed.c b/drivers/reset/reset-aspeed.c
new file mode 100644
index 000000000..dd2f860a6
--- /dev/null
+++ b/drivers/reset/reset-aspeed.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2024 ASPEED Technology Inc.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/reset/aspeed,ast2700-scu.h>
+
+#define SCU0_RESET_CTRL1 0x200
+#define SCU0_RESET_CTRL2 0x220
+#define SCU1_RESET_CTRL1 0x200
+#define SCU1_RESET_CTRL2 0x220
+#define SCU1_PCIE3_CTRL 0x908
+
+struct ast2700_reset_signal {
+	bool dedicated_clr; /* dedicated reset clr offset */
+	u32 offset, bit;
+};
+
+struct aspeed_reset_info {
+	unsigned int nr_resets;
+	const struct ast2700_reset_signal *signal;
+};
+
+struct aspeed_reset {
+	struct reset_controller_dev rcdev;
+	struct aspeed_reset_info *info;
+	spinlock_t lock; /* Protect read-modify-write cycle */
+	void __iomem *base;
+};
+
+static const struct ast2700_reset_signal ast2700_reset0_signals[] = {
+	[SCU0_RESET_SDRAM] = { true, SCU0_RESET_CTRL1, BIT(0) },
+	[SCU0_RESET_DDRPHY] = { true, SCU0_RESET_CTRL1, BIT(1) },
+	[SCU0_RESET_RSA] = { true, SCU0_RESET_CTRL1, BIT(2) },
+	[SCU0_RESET_SHA3] = { true, SCU0_RESET_CTRL1, BIT(3) },
+	[SCU0_RESET_HACE] = { true, SCU0_RESET_CTRL1, BIT(4) },
+	[SCU0_RESET_SOC] = { true, SCU0_RESET_CTRL1, BIT(5) },
+	[SCU0_RESET_VIDEO] = { true, SCU0_RESET_CTRL1, BIT(6) },
+	[SCU0_RESET_2D] = { true, SCU0_RESET_CTRL1, BIT(7) },
+	[SCU0_RESET_PCIS] = { true, SCU0_RESET_CTRL1, BIT(8) },
+	[SCU0_RESET_RVAS0] = { true, SCU0_RESET_CTRL1, BIT(9) },
+	[SCU0_RESET_RVAS1] = { true, SCU0_RESET_CTRL1, BIT(10) },
+	[SCU0_RESET_SM3] = { true, SCU0_RESET_CTRL1, BIT(11) },
+	[SCU0_RESET_SM4] = { true, SCU0_RESET_CTRL1, BIT(12) },
+	[SCU0_RESET_CRT0] = { true, SCU0_RESET_CTRL1, BIT(13) },
+	[SCU0_RESET_ECC] = { true, SCU0_RESET_CTRL1, BIT(14) },
+	[SCU0_RESET_DP_PCI] = { true, SCU0_RESET_CTRL1, BIT(15) },
+	[SCU0_RESET_UFS] = { true, SCU0_RESET_CTRL1, BIT(16) },
+	[SCU0_RESET_EMMC] = { true, SCU0_RESET_CTRL1, BIT(17) },
+	[SCU0_RESET_PCIE1RST] = { true, SCU0_RESET_CTRL1, BIT(18) },
+	[SCU0_RESET_PCIE1RSTOE] = { true, SCU0_RESET_CTRL1, BIT(19) },
+	[SCU0_RESET_PCIE0RST] = { true, SCU0_RESET_CTRL1, BIT(20) },
+	[SCU0_RESET_PCIE0RSTOE] = { true, SCU0_RESET_CTRL1, BIT(21) },
+	[SCU0_RESET_JTAG] = { true, SCU0_RESET_CTRL1, BIT(22) },
+	[SCU0_RESET_MCTP0] = { true, SCU0_RESET_CTRL1, BIT(23) },
+	[SCU0_RESET_MCTP1] = { true, SCU0_RESET_CTRL1, BIT(24) },
+	[SCU0_RESET_XDMA0] = { true, SCU0_RESET_CTRL1, BIT(25) },
+	[SCU0_RESET_XDMA1] = { true, SCU0_RESET_CTRL1, BIT(26) },
+	[SCU0_RESET_H2X1] = { true, SCU0_RESET_CTRL1, BIT(27) },
+	[SCU0_RESET_DP] = { true, SCU0_RESET_CTRL1, BIT(28) },
+	[SCU0_RESET_DP_MCU] = { true, SCU0_RESET_CTRL1, BIT(29) },
+	[SCU0_RESET_SSP] = { true, SCU0_RESET_CTRL1, BIT(30) },
+	[SCU0_RESET_H2X0] = { true, SCU0_RESET_CTRL1, BIT(31) },
+	[SCU0_RESET_PORTA_VHUB] = { true, SCU0_RESET_CTRL2, BIT(0) },
+	[SCU0_RESET_PORTA_PHY3] = { true, SCU0_RESET_CTRL2, BIT(1) },
+	[SCU0_RESET_PORTA_XHCI] = { true, SCU0_RESET_CTRL2, BIT(2) },
+	[SCU0_RESET_PORTB_VHUB] = { true, SCU0_RESET_CTRL2, BIT(3) },
+	[SCU0_RESET_PORTB_PHY3] = { true, SCU0_RESET_CTRL2, BIT(4) },
+	[SCU0_RESET_PORTB_XHCI] = { true, SCU0_RESET_CTRL2, BIT(5) },
+	[SCU0_RESET_PORTA_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(6) },
+	[SCU0_RESET_PORTB_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(7) },
+	[SCU0_RESET_UHCI] = { true, SCU0_RESET_CTRL2, BIT(8) },
+	[SCU0_RESET_TSP] = { true, SCU0_RESET_CTRL2, BIT(9) },
+	[SCU0_RESET_E2M0] = { true, SCU0_RESET_CTRL2, BIT(10) },
+	[SCU0_RESET_E2M1] = { true, SCU0_RESET_CTRL2, BIT(11) },
+	[SCU0_RESET_VLINK] = { true, SCU0_RESET_CTRL2, BIT(12) },
+};
+
+static const struct ast2700_reset_signal ast2700_reset1_signals[] = {
+	[SCU1_RESET_LPC0] = { true, SCU1_RESET_CTRL1, BIT(0) },
+	[SCU1_RESET_LPC1] = { true, SCU1_RESET_CTRL1, BIT(1) },
+	[SCU1_RESET_MII] = { true, SCU1_RESET_CTRL1, BIT(2) },
+	[SCU1_RESET_PECI] = { true, SCU1_RESET_CTRL1, BIT(3) },
+	[SCU1_RESET_PWM] = { true, SCU1_RESET_CTRL1, BIT(4) },
+	[SCU1_RESET_MAC0] = { true, SCU1_RESET_CTRL1, BIT(5) },
+	[SCU1_RESET_MAC1] = { true, SCU1_RESET_CTRL1, BIT(6) },
+	[SCU1_RESET_MAC2] = { true, SCU1_RESET_CTRL1, BIT(7) },
+	[SCU1_RESET_ADC] = { true, SCU1_RESET_CTRL1, BIT(8) },
+	[SCU1_RESET_SD] = { true, SCU1_RESET_CTRL1, BIT(9) },
+	[SCU1_RESET_ESPI0] = { true, SCU1_RESET_CTRL1, BIT(10) },
+	[SCU1_RESET_ESPI1] = { true, SCU1_RESET_CTRL1, BIT(11) },
+	[SCU1_RESET_JTAG1] = { true, SCU1_RESET_CTRL1, BIT(12) },
+	[SCU1_RESET_SPI0] = { true, SCU1_RESET_CTRL1, BIT(13) },
+	[SCU1_RESET_SPI1] = { true, SCU1_RESET_CTRL1, BIT(14) },
+	[SCU1_RESET_SPI2] = { true, SCU1_RESET_CTRL1, BIT(15) },
+	[SCU1_RESET_I3C0] = { true, SCU1_RESET_CTRL1, BIT(16) },
+	[SCU1_RESET_I3C1] = { true, SCU1_RESET_CTRL1, BIT(17) },
+	[SCU1_RESET_I3C2] = { true, SCU1_RESET_CTRL1, BIT(18) },
+	[SCU1_RESET_I3C3] = { true, SCU1_RESET_CTRL1, BIT(19) },
+	[SCU1_RESET_I3C4] = { true, SCU1_RESET_CTRL1, BIT(20) },
+	[SCU1_RESET_I3C5] = { true, SCU1_RESET_CTRL1, BIT(21) },
+	[SCU1_RESET_I3C6] = { true, SCU1_RESET_CTRL1, BIT(22) },
+	[SCU1_RESET_I3C7] = { true, SCU1_RESET_CTRL1, BIT(23) },
+	[SCU1_RESET_I3C8] = { true, SCU1_RESET_CTRL1, BIT(24) },
+	[SCU1_RESET_I3C9] = { true, SCU1_RESET_CTRL1, BIT(25) },
+	[SCU1_RESET_I3C10] = { true, SCU1_RESET_CTRL1, BIT(26) },
+	[SCU1_RESET_I3C11] = { true, SCU1_RESET_CTRL1, BIT(27) },
+	[SCU1_RESET_I3C12] = { true, SCU1_RESET_CTRL1, BIT(28) },
+	[SCU1_RESET_I3C13] = { true, SCU1_RESET_CTRL1, BIT(29) },
+	[SCU1_RESET_I3C14] = { true, SCU1_RESET_CTRL1, BIT(30) },
+	[SCU1_RESET_I3C15] = { true, SCU1_RESET_CTRL1, BIT(31) },
+	[SCU1_RESET_MCU0] = { true, SCU1_RESET_CTRL2, BIT(0) },
+	[SCU1_RESET_MCU1] = { true, SCU1_RESET_CTRL2, BIT(1) },
+	[SCU1_RESET_H2A_SPI1] = { true, SCU1_RESET_CTRL2, BIT(2) },
+	[SCU1_RESET_H2A_SPI2] = { true, SCU1_RESET_CTRL2, BIT(3) },
+	[SCU1_RESET_UART0] = { true, SCU1_RESET_CTRL2, BIT(4) },
+	[SCU1_RESET_UART1] = { true, SCU1_RESET_CTRL2, BIT(5) },
+	[SCU1_RESET_UART2] = { true, SCU1_RESET_CTRL2, BIT(6) },
+	[SCU1_RESET_UART3] = { true, SCU1_RESET_CTRL2, BIT(7) },
+	[SCU1_RESET_I2C_FILTER] = { true, SCU1_RESET_CTRL2, BIT(8) },
+	[SCU1_RESET_CALIPTRA] = { true, SCU1_RESET_CTRL2, BIT(9) },
+	[SCU1_RESET_XDMA] = { true, SCU1_RESET_CTRL2, BIT(10) },
+	[SCU1_RESET_FSI] = { true, SCU1_RESET_CTRL2, BIT(12) },
+	[SCU1_RESET_CAN] = { true, SCU1_RESET_CTRL2, BIT(13) },
+	[SCU1_RESET_MCTP] = { true, SCU1_RESET_CTRL2, BIT(14) },
+	[SCU1_RESET_I2C] = { true, SCU1_RESET_CTRL2, BIT(15) },
+	[SCU1_RESET_UART6] = { true, SCU1_RESET_CTRL2, BIT(16) },
+	[SCU1_RESET_UART7] = { true, SCU1_RESET_CTRL2, BIT(17) },
+	[SCU1_RESET_UART8] = { true, SCU1_RESET_CTRL2, BIT(18) },
+	[SCU1_RESET_UART9] = { true, SCU1_RESET_CTRL2, BIT(19) },
+	[SCU1_RESET_LTPI0] = { true, SCU1_RESET_CTRL2, BIT(20) },
+	[SCU1_RESET_VGAL] = { true, SCU1_RESET_CTRL2, BIT(21) },
+	[SCU1_RESET_LTPI1] = { true, SCU1_RESET_CTRL2, BIT(22) },
+	[SCU1_RESET_ACE] = { true, SCU1_RESET_CTRL2, BIT(23) },
+	[SCU1_RESET_E2M] = { true, SCU1_RESET_CTRL2, BIT(24) },
+	[SCU1_RESET_UHCI] = { true, SCU1_RESET_CTRL2, BIT(25) },
+	[SCU1_RESET_PORTC_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(26) },
+	[SCU1_RESET_PORTC_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(27) },
+	[SCU1_RESET_PORTD_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(28) },
+	[SCU1_RESET_PORTD_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(29) },
+	[SCU1_RESET_H2X] = { true, SCU1_RESET_CTRL2, BIT(30) },
+	[SCU1_RESET_I3CDMA] = { true, SCU1_RESET_CTRL2, BIT(31) },
+	[SCU1_RESET_PCIE2RST] = { false, SCU1_PCIE3_CTRL, BIT(0) },
+};
+
+static inline struct aspeed_reset *to_aspeed_reset(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct aspeed_reset, rcdev);
+}
+
+static int aspeed_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct aspeed_reset *rc = to_aspeed_reset(rcdev);
+	void __iomem *reg_offset = rc->base + rc->info->signal[id].offset;
+
+	if (rc->info->signal[id].dedicated_clr) {
+		writel(rc->info->signal[id].bit, reg_offset);
+	} else {
+		guard(spinlock_irqsave)(&rc->lock);
+		writel(readl(reg_offset) & ~rc->info->signal[id].bit, reg_offset);
+	}
+
+	return 0;
+}
+
+static int aspeed_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct aspeed_reset *rc = to_aspeed_reset(rcdev);
+	void __iomem *reg_offset = rc->base + rc->info->signal[id].offset;
+
+	if (rc->info->signal[id].dedicated_clr) {
+		writel(rc->info->signal[id].bit, reg_offset + 0x04);
+	} else {
+		guard(spinlock_irqsave)(&rc->lock);
+		writel(readl(reg_offset) | rc->info->signal[id].bit, reg_offset);
+	}
+
+	return 0;
+}
+
+static int aspeed_reset_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct aspeed_reset *rc = to_aspeed_reset(rcdev);
+	void __iomem *reg_offset = rc->base + rc->info->signal[id].offset;
+
+	return (readl(reg_offset) & rc->info->signal[id].bit) ? 1 : 0;
+}
+
+static const struct reset_control_ops aspeed_reset_ops = {
+	.assert = aspeed_reset_assert,
+	.deassert = aspeed_reset_deassert,
+	.status = aspeed_reset_status,
+};
+
+static int aspeed_reset_probe(struct auxiliary_device *adev,
+			      const struct auxiliary_device_id *id)
+{
+	struct aspeed_reset *reset;
+	struct device *dev = &adev->dev;
+
+	reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	spin_lock_init(&reset->lock);
+
+	reset->info = (struct aspeed_reset_info *)id->driver_data;
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = reset->info->nr_resets;
+	reset->rcdev.ops = &aspeed_reset_ops;
+	reset->rcdev.of_node = dev->parent->of_node;
+	reset->rcdev.dev = dev;
+	reset->rcdev.of_reset_n_cells = 1;
+	reset->base = (void __iomem *)adev->dev.platform_data;
+
+	return devm_reset_controller_register(dev, &reset->rcdev);
+}
+
+static const struct aspeed_reset_info ast2700_reset0_info = {
+	.nr_resets = ARRAY_SIZE(ast2700_reset0_signals),
+	.signal = ast2700_reset0_signals,
+};
+
+static const struct aspeed_reset_info ast2700_reset1_info = {
+	.nr_resets = ARRAY_SIZE(ast2700_reset1_signals),
+	.signal = ast2700_reset1_signals,
+};
+
+static const struct auxiliary_device_id aspeed_reset_ids[] = {
+	{ .name = "clk_ast2700.reset0", .driver_data = (kernel_ulong_t)&ast2700_reset0_info },
+	{ .name = "clk_ast2700.reset1", .driver_data = (kernel_ulong_t)&ast2700_reset1_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, aspeed_reset_ids);
+
+static struct auxiliary_driver aspeed_reset_driver = {
+	.probe		= aspeed_reset_probe,
+	.id_table	= aspeed_reset_ids,
+};
+
+module_auxiliary_driver(aspeed_reset_driver);
+
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_DESCRIPTION("ASPEED SoC Reset Controller Driver");
+MODULE_LICENSE("GPL");