Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 390 insertions, 0 deletions

diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
new file mode 100644
index 000000000..817150386
--- /dev/null
+++ b/drivers/regulator/s2mpa01.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2013 Samsung Electronics Co., Ltd
+//		http://www.samsung.com
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mpa01.h>
+
+struct s2mpa01_info {
+	int ramp_delay24;
+	int ramp_delay3;
+	int ramp_delay5;
+	int ramp_delay16;
+	int ramp_delay7;
+	int ramp_delay8910;
+};
+
+static int get_ramp_delay(int ramp_delay)
+{
+	unsigned char cnt = 0;
+
+	ramp_delay /= 6250;
+
+	while (true) {
+		ramp_delay = ramp_delay >> 1;
+		if (ramp_delay == 0)
+			break;
+		cnt++;
+	}
+
+	if (cnt > 3)
+		cnt = 3;
+
+	return cnt;
+}
+
+static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+				   unsigned int old_selector,
+				   unsigned int new_selector)
+{
+	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
+	unsigned int ramp_delay = 0;
+	int old_volt, new_volt;
+
+	switch (rdev_get_id(rdev)) {
+	case S2MPA01_BUCK2:
+	case S2MPA01_BUCK4:
+		ramp_delay = s2mpa01->ramp_delay24;
+		break;
+	case S2MPA01_BUCK3:
+		ramp_delay = s2mpa01->ramp_delay3;
+		break;
+	case S2MPA01_BUCK5:
+		ramp_delay = s2mpa01->ramp_delay5;
+		break;
+	case S2MPA01_BUCK1:
+	case S2MPA01_BUCK6:
+		ramp_delay = s2mpa01->ramp_delay16;
+		break;
+	case S2MPA01_BUCK7:
+		ramp_delay = s2mpa01->ramp_delay7;
+		break;
+	case S2MPA01_BUCK8:
+	case S2MPA01_BUCK9:
+	case S2MPA01_BUCK10:
+		ramp_delay = s2mpa01->ramp_delay8910;
+		break;
+	}
+
+	if (ramp_delay == 0)
+		ramp_delay = rdev->desc->ramp_delay;
+
+	old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
+	new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
+
+	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+}
+
+static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
+	unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
+	unsigned int ramp_enable = 1, enable_shift = 0;
+	int ret;
+
+	switch (rdev_get_id(rdev)) {
+	case S2MPA01_BUCK1:
+		enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		if (ramp_delay > s2mpa01->ramp_delay16)
+			s2mpa01->ramp_delay16 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay16;
+
+		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK2:
+		enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		if (ramp_delay > s2mpa01->ramp_delay24)
+			s2mpa01->ramp_delay24 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay24;
+
+		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK3:
+		enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		s2mpa01->ramp_delay3 = ramp_delay;
+		ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK4:
+		enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		if (ramp_delay > s2mpa01->ramp_delay24)
+			s2mpa01->ramp_delay24 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay24;
+
+		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK5:
+		s2mpa01->ramp_delay5 = ramp_delay;
+		ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK6:
+		if (ramp_delay > s2mpa01->ramp_delay16)
+			s2mpa01->ramp_delay16 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay16;
+
+		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK7:
+		s2mpa01->ramp_delay7 = ramp_delay;
+		ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK8:
+	case S2MPA01_BUCK9:
+	case S2MPA01_BUCK10:
+		if (ramp_delay > s2mpa01->ramp_delay8910)
+			s2mpa01->ramp_delay8910 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay8910;
+
+		ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	if (!ramp_enable)
+		goto ramp_disable;
+
+	/* Ramp delay can be enabled/disabled only for buck[1234] */
+	if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
+			rdev_get_id(rdev) <= S2MPA01_BUCK4) {
+		ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+					 1 << enable_shift, 1 << enable_shift);
+		if (ret) {
+			dev_err(&rdev->dev, "failed to enable ramp rate\n");
+			return ret;
+		}
+	}
+
+	ramp_val = get_ramp_delay(ramp_delay);
+
+	return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
+				  ramp_val << ramp_shift);
+
+ramp_disable:
+	return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+				  1 << enable_shift, 0);
+}
+
+static const struct regulator_ops s2mpa01_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops s2mpa01_buck_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= s2mpa01_regulator_set_voltage_time_sel,
+	.set_ramp_delay		= s2mpa01_set_ramp_delay,
+};
+
+#define regulator_desc_ldo(num, step) {			\
+	.name		= "LDO"#num,			\
+	.of_match	= of_match_ptr("LDO"#num),	\
+	.regulators_node = of_match_ptr("regulators"),	\
+	.id		= S2MPA01_LDO##num,		\
+	.ops		= &s2mpa01_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= MIN_800_MV,			\
+	.uV_step	= step,				\
+	.n_voltages	= S2MPA01_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
+	.vsel_mask	= S2MPA01_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK		\
+}
+
+#define regulator_desc_buck1_4(num)	{			\
+	.name		= "BUCK"#num,				\
+	.of_match	= of_match_ptr("BUCK"#num),		\
+	.regulators_node = of_match_ptr("regulators"),		\
+	.id		= S2MPA01_BUCK##num,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= MIN_600_MV,				\
+	.uV_step	= STEP_6_25_MV,				\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B1CTRL2 + (num - 1) * 2,	\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B1CTRL1 + (num - 1) * 2,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck5	{				\
+	.name		= "BUCK5",				\
+	.of_match	= of_match_ptr("BUCK5"),		\
+	.regulators_node = of_match_ptr("regulators"),		\
+	.id		= S2MPA01_BUCK5,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= MIN_800_MV,				\
+	.uV_step	= STEP_6_25_MV,				\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B5CTRL2,			\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B5CTRL1,			\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck6_10(num, min, step) {			\
+	.name		= "BUCK"#num,				\
+	.of_match	= of_match_ptr("BUCK"#num),		\
+	.regulators_node = of_match_ptr("regulators"),		\
+	.id		= S2MPA01_BUCK##num,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= min,					\
+	.uV_step	= step,					\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B6CTRL2 + (num - 6) * 2,	\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B6CTRL1 + (num - 6) * 2,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+static const struct regulator_desc regulators[] = {
+	regulator_desc_ldo(1, STEP_25_MV),
+	regulator_desc_ldo(2, STEP_50_MV),
+	regulator_desc_ldo(3, STEP_50_MV),
+	regulator_desc_ldo(4, STEP_50_MV),
+	regulator_desc_ldo(5, STEP_25_MV),
+	regulator_desc_ldo(6, STEP_25_MV),
+	regulator_desc_ldo(7, STEP_50_MV),
+	regulator_desc_ldo(8, STEP_50_MV),
+	regulator_desc_ldo(9, STEP_50_MV),
+	regulator_desc_ldo(10, STEP_50_MV),
+	regulator_desc_ldo(11, STEP_50_MV),
+	regulator_desc_ldo(12, STEP_50_MV),
+	regulator_desc_ldo(13, STEP_50_MV),
+	regulator_desc_ldo(14, STEP_50_MV),
+	regulator_desc_ldo(15, STEP_50_MV),
+	regulator_desc_ldo(16, STEP_50_MV),
+	regulator_desc_ldo(17, STEP_50_MV),
+	regulator_desc_ldo(18, STEP_50_MV),
+	regulator_desc_ldo(19, STEP_50_MV),
+	regulator_desc_ldo(20, STEP_50_MV),
+	regulator_desc_ldo(21, STEP_50_MV),
+	regulator_desc_ldo(22, STEP_50_MV),
+	regulator_desc_ldo(23, STEP_50_MV),
+	regulator_desc_ldo(24, STEP_50_MV),
+	regulator_desc_ldo(25, STEP_50_MV),
+	regulator_desc_ldo(26, STEP_25_MV),
+	regulator_desc_buck1_4(1),
+	regulator_desc_buck1_4(2),
+	regulator_desc_buck1_4(3),
+	regulator_desc_buck1_4(4),
+	regulator_desc_buck5,
+	regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
+	regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
+	regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
+	regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
+	regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
+};
+
+static int s2mpa01_pmic_probe(struct platform_device *pdev)
+{
+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+	struct s2mpa01_info *s2mpa01;
+	int i;
+
+	s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
+	if (!s2mpa01)
+		return -ENOMEM;
+
+	config.dev = iodev->dev;
+	config.regmap = iodev->regmap_pmic;
+	config.driver_data = s2mpa01;
+
+	for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
+		struct regulator_dev *rdev;
+
+		rdev = devm_regulator_register(&pdev->dev,
+						&regulators[i], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "regulator init failed for %d\n",
+				i);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id s2mpa01_pmic_id[] = {
+	{ .name = "s2mpa01-pmic" },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
+
+static struct platform_driver s2mpa01_pmic_driver = {
+	.driver = {
+		.name = "s2mpa01-pmic",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe = s2mpa01_pmic_probe,
+	.id_table = s2mpa01_pmic_id,
+};
+
+module_platform_driver(s2mpa01_pmic_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
+MODULE_DESCRIPTION("Samsung S2MPA01 Regulator Driver");
+MODULE_LICENSE("GPL");