Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 370 insertions, 0 deletions

diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c
new file mode 100644
index 000000000..e0b62bc02
--- /dev/null
+++ b/drivers/regulator/mp886x.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// MP8867/MP8869 regulator driver
+//
+// Copyright (C) 2020 Synaptics Incorporated
+//
+// Author: Jisheng Zhang <jszhang@kernel.org>
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MP886X_VSEL		0x00
+#define  MP886X_V_BOOT		(1 << 7)
+#define MP886X_SYSCNTLREG1	0x01
+#define  MP886X_MODE		(1 << 0)
+#define  MP886X_SLEW_SHIFT	3
+#define  MP886X_SLEW_MASK	(0x7 << MP886X_SLEW_SHIFT)
+#define  MP886X_GO		(1 << 6)
+#define  MP886X_EN		(1 << 7)
+#define MP8869_SYSCNTLREG2	0x02
+
+struct mp886x_cfg_info {
+	const struct regulator_ops *rops;
+	const unsigned int slew_rates[8];
+	const int switch_freq[4];
+	const u8 fs_reg;
+	const u8 fs_shift;
+};
+
+struct mp886x_device_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_init_data *regulator;
+	struct gpio_desc *en_gpio;
+	const struct mp886x_cfg_info *ci;
+	u32 r[2];
+	unsigned int sel;
+};
+
+static void mp886x_set_switch_freq(struct mp886x_device_info *di,
+				   struct regmap *regmap,
+				   u32 freq)
+{
+	const struct mp886x_cfg_info *ci = di->ci;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ci->switch_freq); i++) {
+		if (freq == ci->switch_freq[i]) {
+			regmap_update_bits(regmap, ci->fs_reg,
+				  0x3 << ci->fs_shift, i << ci->fs_shift);
+			return;
+		}
+	}
+
+	dev_err(di->dev, "invalid frequency %d\n", freq);
+}
+
+static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
+				   MP886X_MODE, MP886X_MODE);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
+				   MP886X_MODE, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int mp886x_get_mode(struct regulator_dev *rdev)
+{
+	u32 val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val);
+	if (ret < 0)
+		return ret;
+	if (val & MP886X_MODE)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
+{
+	int ret;
+
+	ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
+				 MP886X_GO, MP886X_GO);
+	if (ret < 0)
+		return ret;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+	return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+				  MP886X_V_BOOT | rdev->desc->vsel_mask, sel);
+}
+
+static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2)
+{
+	u32 tmp = uv * r1 / r2;
+
+	return uv + tmp;
+}
+
+static int mp8869_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct mp886x_device_info *di = rdev_get_drvdata(rdev);
+	int ret, uv;
+	unsigned int val;
+	bool fbloop;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret)
+		return ret;
+
+	fbloop = val & MP886X_V_BOOT;
+	if (fbloop) {
+		uv = rdev->desc->min_uV;
+		uv = mp8869_scale(uv, di->r[0], di->r[1]);
+		return regulator_map_voltage_linear(rdev, uv, uv);
+	}
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	return val;
+}
+
+static const struct regulator_ops mp8869_regulator_ops = {
+	.set_voltage_sel = mp8869_set_voltage_sel,
+	.get_voltage_sel = mp8869_get_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mp886x_set_mode,
+	.get_mode = mp886x_get_mode,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
+};
+
+static const struct mp886x_cfg_info mp8869_ci = {
+	.rops = &mp8869_regulator_ops,
+	.slew_rates = {
+		40000,
+		30000,
+		20000,
+		10000,
+		5000,
+		2500,
+		1250,
+		625,
+	},
+	.switch_freq = {
+		500000,
+		750000,
+		1000000,
+		1250000,
+	},
+	.fs_reg = MP8869_SYSCNTLREG2,
+	.fs_shift = 4,
+};
+
+static int mp8867_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
+{
+	struct mp886x_device_info *di = rdev_get_drvdata(rdev);
+	int ret, delta;
+
+	ret = mp8869_set_voltage_sel(rdev, sel);
+	if (ret < 0)
+		return ret;
+
+	delta = di->sel - sel;
+	if (abs(delta) <= 5)
+		ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
+					 MP886X_GO, 0);
+	di->sel = sel;
+
+	return ret;
+}
+
+static int mp8867_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct mp886x_device_info *di = rdev_get_drvdata(rdev);
+	int ret, uv;
+	unsigned int val;
+	bool fbloop;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret)
+		return ret;
+
+	fbloop = val & MP886X_V_BOOT;
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	if (fbloop) {
+		uv = regulator_list_voltage_linear(rdev, val);
+		uv = mp8869_scale(uv, di->r[0], di->r[1]);
+		return regulator_map_voltage_linear(rdev, uv, uv);
+	}
+
+	return val;
+}
+
+static const struct regulator_ops mp8867_regulator_ops = {
+	.set_voltage_sel = mp8867_set_voltage_sel,
+	.get_voltage_sel = mp8867_get_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mp886x_set_mode,
+	.get_mode = mp886x_get_mode,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
+};
+
+static const struct mp886x_cfg_info mp8867_ci = {
+	.rops = &mp8867_regulator_ops,
+	.slew_rates = {
+		64000,
+		32000,
+		16000,
+		8000,
+		4000,
+		2000,
+		1000,
+		500,
+	},
+	.switch_freq = {
+		500000,
+		750000,
+		1000000,
+		1500000,
+	},
+	.fs_reg = MP886X_SYSCNTLREG1,
+	.fs_shift = 1,
+};
+
+static int mp886x_regulator_register(struct mp886x_device_info *di,
+				     struct regulator_config *config)
+{
+	struct regulator_desc *rdesc = &di->desc;
+	struct regulator_dev *rdev;
+
+	rdesc->name = "mp886x-reg";
+	rdesc->supply_name = "vin";
+	rdesc->ops = di->ci->rops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->n_voltages = 128;
+	rdesc->enable_reg = MP886X_SYSCNTLREG1;
+	rdesc->enable_mask = MP886X_EN;
+	rdesc->min_uV = 600000;
+	rdesc->uV_step = 10000;
+	rdesc->vsel_reg = MP886X_VSEL;
+	rdesc->vsel_mask = 0x3f;
+	rdesc->ramp_reg = MP886X_SYSCNTLREG1;
+	rdesc->ramp_mask = MP886X_SLEW_MASK;
+	rdesc->ramp_delay_table = di->ci->slew_rates;
+	rdesc->n_ramp_values = ARRAY_SIZE(di->ci->slew_rates);
+	rdesc->owner = THIS_MODULE;
+
+	rdev = devm_regulator_register(di->dev, &di->desc, config);
+	if (IS_ERR(rdev))
+		return PTR_ERR(rdev);
+	di->sel = rdesc->ops->get_voltage_sel(rdev);
+	return 0;
+}
+
+static const struct regmap_config mp886x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int mp886x_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct mp886x_device_info *di;
+	struct regulator_config config = { };
+	struct regmap *regmap;
+	u32 freq;
+	int ret;
+
+	di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
+	if (!di->regulator) {
+		dev_err(dev, "Platform data not found!\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_array(np, "mps,fb-voltage-divider",
+					 di->r, 2);
+	if (ret)
+		return ret;
+
+	di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(di->en_gpio))
+		return PTR_ERR(di->en_gpio);
+
+	di->ci = i2c_get_match_data(client);
+	di->dev = dev;
+
+	regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+	i2c_set_clientdata(client, di);
+
+	config.dev = di->dev;
+	config.init_data = di->regulator;
+	config.regmap = regmap;
+	config.driver_data = di;
+	config.of_node = np;
+
+	if (!of_property_read_u32(np, "mps,switch-frequency-hz", &freq))
+		mp886x_set_switch_freq(di, regmap, freq);
+
+	ret = mp886x_regulator_register(di, &config);
+	if (ret < 0)
+		dev_err(dev, "Failed to register regulator!\n");
+	return ret;
+}
+
+static const struct of_device_id mp886x_dt_ids[] = {
+	{ .compatible = "mps,mp8867", .data = &mp8867_ci },
+	{ .compatible = "mps,mp8869", .data = &mp8869_ci },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mp886x_dt_ids);
+
+static const struct i2c_device_id mp886x_id[] = {
+	{ .name = "mp8867", .driver_data = (kernel_ulong_t)&mp8867_ci },
+	{ .name = "mp8869", .driver_data = (kernel_ulong_t)&mp8869_ci },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mp886x_id);
+
+static struct i2c_driver mp886x_regulator_driver = {
+	.driver = {
+		.name = "mp886x-regulator",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = mp886x_dt_ids,
+	},
+	.probe = mp886x_i2c_probe,
+	.id_table = mp886x_id,
+};
+module_i2c_driver(mp886x_regulator_driver);
+
+MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
+MODULE_DESCRIPTION("MP886x regulator driver");
+MODULE_LICENSE("GPL v2");