x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/power/sequencing/Kconfig b/drivers/power/sequencing/Kconfig
new file mode 100644
index 000000000..1c5f5820f
--- /dev/null
+++ b/drivers/power/sequencing/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menuconfig POWER_SEQUENCING
+	tristate "Power Sequencing support"
+	help
+	  Say Y here to enable the Power Sequencing subsystem.
+
+	  This subsystem is designed to control power to devices that share
+	  complex resources and/or require specific power sequences to be run
+	  during power-up.
+
+	  If unsure, say no.
+
+if POWER_SEQUENCING
+
+config POWER_SEQUENCING_QCOM_WCN
+	tristate "Qualcomm WCN family PMU driver"
+	default m if ARCH_QCOM
+	depends on OF || COMPILE_TEST
+	help
+	  Say Y here to enable the power sequencing driver for Qualcomm
+	  WCN Bluetooth/WLAN chipsets.
+
+	  Typically, a package from the Qualcomm WCN family contains the BT
+	  and WLAN modules whose power is controlled by the PMU module. As the
+	  former two share the power-up sequence which is executed by the PMU,
+	  this driver is needed for correct power control or else we'd risk not
+	  respecting the required delays between enabling Bluetooth and WLAN.
+
+config POWER_SEQUENCING_TH1520_GPU
+	tristate "T-HEAD TH1520 GPU power sequencing driver"
+	depends on (ARCH_THEAD && AUXILIARY_BUS) || COMPILE_TEST
+	help
+	  Say Y here to enable the power sequencing driver for the TH1520 SoC
+	  GPU. This driver handles the complex clock and reset sequence
+	  required to power on the Imagination BXM GPU on this platform.
+
+config POWER_SEQUENCING_PCIE_M2
+	tristate "PCIe M.2 connector power sequencing driver"
+	depends on OF
+	depends on PCI
+	depends on SERIAL_DEV_BUS
+	select OF_DYNAMIC
+	help
+	  Say Y here to enable the power sequencing driver for PCIe M.2
+	  connectors. This driver handles the power sequencing for the M.2
+	  connectors exposing multiple interfaces like PCIe, SATA, UART, etc...
+
+endif