Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/power/sequencing/Kconfig b/drivers/power/sequencing/Kconfig
new file mode 100644
index 000000000..1c5f5820f
--- /dev/null
+++ b/drivers/power/sequencing/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menuconfig POWER_SEQUENCING
+	tristate "Power Sequencing support"
+	help
+	  Say Y here to enable the Power Sequencing subsystem.
+
+	  This subsystem is designed to control power to devices that share
+	  complex resources and/or require specific power sequences to be run
+	  during power-up.
+
+	  If unsure, say no.
+
+if POWER_SEQUENCING
+
+config POWER_SEQUENCING_QCOM_WCN
+	tristate "Qualcomm WCN family PMU driver"
+	default m if ARCH_QCOM
+	depends on OF || COMPILE_TEST
+	help
+	  Say Y here to enable the power sequencing driver for Qualcomm
+	  WCN Bluetooth/WLAN chipsets.
+
+	  Typically, a package from the Qualcomm WCN family contains the BT
+	  and WLAN modules whose power is controlled by the PMU module. As the
+	  former two share the power-up sequence which is executed by the PMU,
+	  this driver is needed for correct power control or else we'd risk not
+	  respecting the required delays between enabling Bluetooth and WLAN.
+
+config POWER_SEQUENCING_TH1520_GPU
+	tristate "T-HEAD TH1520 GPU power sequencing driver"
+	depends on (ARCH_THEAD && AUXILIARY_BUS) || COMPILE_TEST
+	help
+	  Say Y here to enable the power sequencing driver for the TH1520 SoC
+	  GPU. This driver handles the complex clock and reset sequence
+	  required to power on the Imagination BXM GPU on this platform.
+
+config POWER_SEQUENCING_PCIE_M2
+	tristate "PCIe M.2 connector power sequencing driver"
+	depends on OF
+	depends on PCI
+	depends on SERIAL_DEV_BUS
+	select OF_DYNAMIC
+	help
+	  Say Y here to enable the power sequencing driver for PCIe M.2
+	  connectors. This driver handles the power sequencing for the M.2
+	  connectors exposing multiple interfaces like PCIe, SATA, UART, etc...
+
+endif