Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 300 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-da9062.c b/drivers/pinctrl/pinctrl-da9062.c
new file mode 100644
index 000000000..53298cbcc
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-da9062.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dialog DA9062 pinctrl and GPIO driver.
+ * Based on DA9055 GPIO driver.
+ *
+ * TODO:
+ *   - add pinmux and pinctrl support (gpio alternate mode)
+ *
+ * Documents:
+ * [1] https://www.dialog-semiconductor.com/sites/default/files/da9062_datasheet_3v6.pdf
+ *
+ * Copyright (C) 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+#include <linux/bits.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+#define DA9062_TYPE(offset)		(4 * (offset % 2))
+#define DA9062_PIN_SHIFT(offset)	(4 * (offset % 2))
+#define DA9062_PIN_ALTERNATE		0x00 /* gpio alternate mode */
+#define DA9062_PIN_GPI			0x01 /* gpio in */
+#define DA9062_PIN_GPO_OD		0x02 /* gpio out open-drain */
+#define DA9062_PIN_GPO_PP		0x03 /* gpio out push-pull */
+#define DA9062_GPIO_NUM			5
+
+struct da9062_pctl {
+	struct da9062 *da9062;
+	struct gpio_chip gc;
+	unsigned int pin_config[DA9062_GPIO_NUM];
+};
+
+static int da9062_pctl_get_pin_mode(struct da9062_pctl *pctl,
+				    unsigned int offset)
+{
+	struct regmap *regmap = pctl->da9062->regmap;
+	int ret, val;
+
+	ret = regmap_read(regmap, DA9062AA_GPIO_0_1 + (offset >> 1), &val);
+	if (ret < 0)
+		return ret;
+
+	val >>= DA9062_PIN_SHIFT(offset);
+	val &= DA9062AA_GPIO0_PIN_MASK;
+
+	return val;
+}
+
+static int da9062_pctl_set_pin_mode(struct da9062_pctl *pctl,
+				    unsigned int offset, unsigned int mode_req)
+{
+	struct regmap *regmap = pctl->da9062->regmap;
+	unsigned int mode = mode_req;
+	unsigned int mask;
+	int ret;
+
+	mode &= DA9062AA_GPIO0_PIN_MASK;
+	mode <<= DA9062_PIN_SHIFT(offset);
+	mask = DA9062AA_GPIO0_PIN_MASK << DA9062_PIN_SHIFT(offset);
+
+	ret = regmap_update_bits(regmap, DA9062AA_GPIO_0_1 + (offset >> 1),
+				 mask, mode);
+	if (!ret)
+		pctl->pin_config[offset] = mode_req;
+
+	return ret;
+}
+
+static int da9062_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+	int gpio_mode, val;
+	int ret;
+
+	gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+	if (gpio_mode < 0)
+		return gpio_mode;
+
+	switch (gpio_mode) {
+	case DA9062_PIN_ALTERNATE:
+		return -ENOTSUPP;
+	case DA9062_PIN_GPI:
+		ret = regmap_read(regmap, DA9062AA_STATUS_B, &val);
+		if (ret < 0)
+			return ret;
+		break;
+	case DA9062_PIN_GPO_OD:
+	case DA9062_PIN_GPO_PP:
+		ret = regmap_read(regmap, DA9062AA_GPIO_MODE0_4, &val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return !!(val & BIT(offset));
+}
+
+static int da9062_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			   int value)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+
+	return regmap_update_bits(regmap, DA9062AA_GPIO_MODE0_4, BIT(offset),
+				  value << offset);
+}
+
+static int da9062_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	int gpio_mode;
+
+	gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+	if (gpio_mode < 0)
+		return gpio_mode;
+
+	switch (gpio_mode) {
+	case DA9062_PIN_ALTERNATE:
+		return -ENOTSUPP;
+	case DA9062_PIN_GPI:
+		return GPIO_LINE_DIRECTION_IN;
+	case DA9062_PIN_GPO_OD:
+	case DA9062_PIN_GPO_PP:
+		return GPIO_LINE_DIRECTION_OUT;
+	}
+
+	return -EINVAL;
+}
+
+static int da9062_gpio_direction_input(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+	struct gpio_desc *desc = gpio_device_get_desc(gc->gpiodev, offset);
+	unsigned int gpi_type;
+	int ret;
+
+	ret = da9062_pctl_set_pin_mode(pctl, offset, DA9062_PIN_GPI);
+	if (ret)
+		return ret;
+
+	/*
+	 * If the gpio is active low we should set it in hw too. No worries
+	 * about gpio_get() because we read and return the gpio-level. So the
+	 * gpiolib active_low handling is still correct.
+	 *
+	 * 0 - active low, 1 - active high
+	 */
+	gpi_type = !gpiod_is_active_low(desc);
+
+	return regmap_update_bits(regmap, DA9062AA_GPIO_0_1 + (offset >> 1),
+				DA9062AA_GPIO0_TYPE_MASK << DA9062_TYPE(offset),
+				gpi_type << DA9062_TYPE(offset));
+}
+
+static int da9062_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int offset, int value)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	unsigned int pin_config = pctl->pin_config[offset];
+	int ret;
+
+	ret = da9062_pctl_set_pin_mode(pctl, offset, pin_config);
+	if (ret)
+		return ret;
+
+	return da9062_gpio_set(gc, offset, value);
+}
+
+static int da9062_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
+				  unsigned long config)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct regmap *regmap = pctl->da9062->regmap;
+	int gpio_mode;
+
+	/*
+	 * We need to meet the following restrictions [1, Figure 18]:
+	 * - PIN_CONFIG_BIAS_PULL_DOWN -> only allowed if the pin is used as
+	 *				  gpio input
+	 * - PIN_CONFIG_BIAS_PULL_UP   -> only allowed if the pin is used as
+	 *				  gpio output open-drain.
+	 */
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
+					  BIT(offset), 0);
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+		if (gpio_mode < 0)
+			return -EINVAL;
+		else if (gpio_mode != DA9062_PIN_GPI)
+			return -ENOTSUPP;
+		return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
+					  BIT(offset), BIT(offset));
+	case PIN_CONFIG_BIAS_PULL_UP:
+		gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
+		if (gpio_mode < 0)
+			return -EINVAL;
+		else if (gpio_mode != DA9062_PIN_GPO_OD)
+			return -ENOTSUPP;
+		return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
+					  BIT(offset), BIT(offset));
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return da9062_pctl_set_pin_mode(pctl, offset,
+						DA9062_PIN_GPO_OD);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return da9062_pctl_set_pin_mode(pctl, offset,
+						DA9062_PIN_GPO_PP);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int da9062_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct da9062_pctl *pctl = gpiochip_get_data(gc);
+	struct da9062 *da9062 = pctl->da9062;
+
+	return regmap_irq_get_virq(da9062->regmap_irq,
+				   DA9062_IRQ_GPI0 + offset);
+}
+
+static const struct gpio_chip reference_gc = {
+	.owner = THIS_MODULE,
+	.get = da9062_gpio_get,
+	.set = da9062_gpio_set,
+	.get_direction = da9062_gpio_get_direction,
+	.direction_input = da9062_gpio_direction_input,
+	.direction_output = da9062_gpio_direction_output,
+	.set_config = da9062_gpio_set_config,
+	.to_irq = da9062_gpio_to_irq,
+	.can_sleep = true,
+	.ngpio = DA9062_GPIO_NUM,
+	.base = -1,
+};
+
+static int da9062_pctl_probe(struct platform_device *pdev)
+{
+	struct device *parent = pdev->dev.parent;
+	struct da9062_pctl *pctl;
+	int i;
+
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
+	if (!pctl)
+		return -ENOMEM;
+
+	pctl->da9062 = dev_get_drvdata(parent);
+	if (!pctl->da9062)
+		return -EINVAL;
+
+	if (!device_property_present(parent, "gpio-controller"))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(pctl->pin_config); i++)
+		pctl->pin_config[i] = DA9062_PIN_GPO_PP;
+
+	/*
+	 * Currently the driver handles only the GPIO support. The
+	 * pinctrl/pinmux support can be added later if needed.
+	 */
+	pctl->gc = reference_gc;
+	pctl->gc.label = dev_name(&pdev->dev);
+	pctl->gc.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, pctl);
+
+	return devm_gpiochip_add_data(&pdev->dev, &pctl->gc, pctl);
+}
+
+static const struct of_device_id da9062_compatible_reg_id_table[] = {
+	{ .compatible = "dlg,da9062-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9062_compatible_reg_id_table);
+
+static struct platform_driver da9062_pctl_driver = {
+	.probe = da9062_pctl_probe,
+	.driver = {
+		.name	= "da9062-gpio",
+		.of_match_table = da9062_compatible_reg_id_table,
+	},
+};
+module_platform_driver(da9062_pctl_driver);
+
+MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("DA9062 PMIC pinctrl and GPIO Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:da9062-gpio");