Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
new file mode 100644
index 000000000..04c3a5b58
--- /dev/null
+++ b/drivers/pinctrl/intel/Kconfig
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0
+# Intel pin control drivers
+menu "Intel pinctrl drivers"
+	depends on (ACPI && X86) || COMPILE_TEST
+
+config PINCTRL_BAYTRAIL
+	bool "Intel Baytrail GPIO pin control"
+	select PINCTRL_INTEL
+	help
+	  driver for memory mapped GPIO functionality on Intel Baytrail
+	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
+	  Most pins are usually muxed to some other functionality by firmware,
+	  so only a small amount is available for gpio use.
+
+	  Requires ACPI device enumeration code to set up a platform device.
+
+config PINCTRL_CHERRYVIEW
+	tristate "Intel Cherryview/Braswell pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  Cherryview/Braswell pinctrl driver provides an interface that
+	  allows configuring of SoC pins and using them as GPIOs.
+
+config PINCTRL_LYNXPOINT
+	tristate "Intel Lynxpoint pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  Lynxpoint is the PCH of Intel Haswell. This pinctrl driver
+	  provides an interface that allows configuring of PCH pins and
+	  using them as GPIOs.
+
+config PINCTRL_INTEL
+	tristate
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_INTEL_PLATFORM
+	tristate "Intel pinctrl and GPIO platform driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel PCH pins and using them as GPIOs. Currently the following
+	  Intel SoCs / platforms require this to be functional:
+	  - Lunar Lake
+	  - Nova Lake
+	  - Panther Lake
+
+config PINCTRL_ALDERLAKE
+	tristate "Intel Alder Lake pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  PCH pins of the following platforms and using them as GPIOs:
+	  - Alder Lake HX, N, and S
+	  - Raptor Lake HX, E, and S
+	  - Twin Lake
+
+config PINCTRL_BROXTON
+	tristate "Intel Broxton pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  Broxton pinctrl driver provides an interface that allows
+	  configuring of SoC pins and using them as GPIOs.
+
+config PINCTRL_CANNONLAKE
+	tristate "Intel Cannon Lake PCH pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Cannon Lake PCH pins and using them as GPIOs.
+
+config PINCTRL_CEDARFORK
+	tristate "Intel Cedar Fork pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Cedar Fork PCH pins and using them as GPIOs.
+
+config PINCTRL_DENVERTON
+	tristate "Intel Denverton pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Denverton SoC pins and using them as GPIOs.
+
+config PINCTRL_ELKHARTLAKE
+	tristate "Intel Elkhart Lake SoC pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Elkhart Lake SoC pins and using them as GPIOs.
+
+config PINCTRL_EMMITSBURG
+	tristate "Intel Emmitsburg pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Emmitsburg pins and using them as GPIOs.
+
+config PINCTRL_GEMINILAKE
+	tristate "Intel Gemini Lake SoC pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Gemini Lake SoC pins and using them as GPIOs.
+
+config PINCTRL_ICELAKE
+	tristate "Intel Ice Lake PCH pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Ice Lake PCH pins and using them as GPIOs.
+
+config PINCTRL_JASPERLAKE
+	tristate "Intel Jasper Lake PCH pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Jasper Lake PCH pins and using them as GPIOs.
+
+config PINCTRL_LAKEFIELD
+	tristate "Intel Lakefield SoC pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Lakefield SoC pins and using them as GPIOs.
+
+config PINCTRL_LEWISBURG
+	tristate "Intel Lewisburg pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  of Intel Lewisburg pins and using them as GPIOs.
+
+config PINCTRL_METEORLAKE
+	tristate "Intel Meteor Lake pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  SoC pins of the following platforms and using them as GPIOs:
+	  - Arrow Lake (all variants)
+	  - Meteor Lake (all variants)
+
+config PINCTRL_METEORPOINT
+	tristate "Intel Meteor Point pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  PCH pins of the following platforms and using them as GPIOs:
+	  - Arrow Lake HX and S
+
+config PINCTRL_SUNRISEPOINT
+	tristate "Intel Sunrisepoint pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  Sunrisepoint is the PCH of Intel Skylake. This pinctrl driver
+	  provides an interface that allows configuring of PCH pins and
+	  using them as GPIOs.
+
+config PINCTRL_TIGERLAKE
+	tristate "Intel Tiger Lake pinctrl and GPIO driver"
+	select PINCTRL_INTEL
+	help
+	  This pinctrl driver provides an interface that allows configuring
+	  PCH pins of the following platforms and using them as GPIOs:
+	  - Alder Lake H, P, PS, and U
+	  - Raptor Lake H, P, PS, PX, and U
+	  - Rocket Lake S
+	  - Tiger Lake (all variants)
+
+source "drivers/pinctrl/intel/Kconfig.tng"
+endmenu