workqueue: skip the node_nr_active update for non-unbound workqueuesgrafted

apply_wqattrs_commit() updates node_nr_active->max unconditionally.
wq->node_nr_active[] is only allocated for unbound workqueues, so guard
the call before per-cpu workqueues start using this path.

No functional change: only unbound workqueues reach apply_wqattrs_*()
today.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 228 insertions, 0 deletions

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
new file mode 100644
index 000000000..206f3f124
--- /dev/null
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+	bool "Broadcom BCM281xx pinctrl driver"
+	depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select REGMAP_MMIO
+	default ARCH_BCM_MOBILE
+	help
+	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
+	  framework.  GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+	tristate "Broadcom BCM2835 GPIO (with PINCONF) driver"
+	depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST)
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+	default ARCH_BCM2835 || ARCH_BRCMSTB
+	help
+	   Say Y here to enable the Broadcom BCM2835 GPIO driver.
+
+config PINCTRL_BCM4908
+	tristate "Broadcom BCM4908 pinmux driver"
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	default ARCH_BCMBCA
+	help
+	  Driver for BCM4908 family SoCs with integrated pin controller.
+
+	  If compiled as module it will be called pinctrl-bcm4908.
+
+config PINCTRL_BCM63XX
+	bool
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB
+	select REGMAP
+	select GPIO_REGMAP
+
+config PINCTRL_BCM6318
+	bool "Broadcom BCM6318 GPIO driver"
+	depends on (BMIPS_GENERIC || COMPILE_TEST)
+	depends on OF
+	select PINCTRL_BCM63XX
+	default BMIPS_GENERIC
+	help
+	   Say Y here to enable the Broadcom BCM6318 GPIO driver.
+
+config PINCTRL_BCM6328
+	bool "Broadcom BCM6328 GPIO driver"
+	depends on (BMIPS_GENERIC || COMPILE_TEST)
+	depends on OF
+	select PINCTRL_BCM63XX
+	default BMIPS_GENERIC
+	help
+	   Say Y here to enable the Broadcom BCM6328 GPIO driver.
+
+config PINCTRL_BCM6358
+	bool "Broadcom BCM6358 GPIO driver"
+	depends on (BMIPS_GENERIC || COMPILE_TEST)
+	depends on OF
+	select PINCTRL_BCM63XX
+	default BMIPS_GENERIC
+	help
+	   Say Y here to enable the Broadcom BCM6358 GPIO driver.
+
+config PINCTRL_BCM6362
+	bool "Broadcom BCM6362 GPIO driver"
+	depends on (BMIPS_GENERIC || COMPILE_TEST)
+	depends on OF
+	select PINCTRL_BCM63XX
+	default BMIPS_GENERIC
+	help
+	   Say Y here to enable the Broadcom BCM6362 GPIO driver.
+
+config PINCTRL_BCM6368
+	bool "Broadcom BCM6368 GPIO driver"
+	depends on (BMIPS_GENERIC || COMPILE_TEST)
+	depends on OF
+	select PINCTRL_BCM63XX
+	default BMIPS_GENERIC
+	help
+	   Say Y here to enable the Broadcom BCM6368 GPIO driver.
+
+config PINCTRL_BCM63268
+	bool "Broadcom BCM63268 GPIO driver"
+	depends on (BMIPS_GENERIC || COMPILE_TEST)
+	depends on OF
+	select PINCTRL_BCM63XX
+	default BMIPS_GENERIC
+	help
+	   Say Y here to enable the Broadcom BCM63268 GPIO driver.
+
+config PINCTRL_BRCMSTB
+        tristate "Broadcom STB product line pin controller driver"
+        depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST)
+        select PINMUX
+        select PINCONF
+        select GENERIC_PINCONF
+        help
+          Enable pin muxing and configuration functionality
+          for Broadcom STB product line chipsets.
+
+source "drivers/pinctrl/bcm/Kconfig.stb"
+
+config PINCTRL_IPROC_GPIO
+	bool "Broadcom iProc GPIO (with PINCONF) driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	select PINCONF
+	select GENERIC_PINCONF
+	default ARCH_BCM_IPROC
+	help
+	  Say yes here to enable the Broadcom iProc GPIO driver.
+
+	  The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
+	  same GPIO Controller IP hence this driver could be used for all.
+
+	  The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
+	  GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
+	  the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
+	  supported by this driver.
+
+	  The Broadcom NSP has two GPIO controllers including the ChipcommonA
+	  GPIO, the ChipcommonB GPIO. Later controller is supported by this
+	  driver.
+
+	  The Broadcom NS2 has two GPIO controller including the CRMU GPIO,
+	  the ChipcommonG GPIO. Both controllers are supported by this driver.
+
+	  The Broadcom Stingray GPIO controllers are supported by this driver.
+
+	  All above SoCs GPIO controllers support basic PINCONF functions such
+	  as bias pull up, pull down, and drive strength configurations, when
+	  these pins are muxed to GPIO.
+
+	  It provides the framework where pins from the individual GPIO can be
+	  individually muxed to GPIO function, through interaction with the
+	  SoCs IOMUX controller. This features could be used only on SoCs which
+	  support individual pin muxing.
+
+config PINCTRL_CYGNUS_MUX
+	bool "Broadcom Cygnus IOMUX driver"
+	depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
+	depends on OF
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARCH_BCM_CYGNUS
+	help
+	  Say yes here to enable the Broadcom Cygnus IOMUX driver.
+
+	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
+	  configuration, with the exception that certain individual pins
+	  can be overridden to GPIO function
+
+config PINCTRL_NS
+	bool "Broadcom Northstar pins driver"
+	depends on OF && (ARCH_BCM_5301X || COMPILE_TEST)
+	select PINMUX
+	select GENERIC_PINCONF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	default ARCH_BCM_5301X
+	help
+	  Say yes here to enable the Broadcom NS SoC pins driver.
+
+	  The Broadcom Northstar pins driver supports muxing multi-purpose pins
+	  that can be used for various functions (e.g. SPI, I2C, UART) as well
+	  as GPIOs.
+
+config PINCTRL_NSP_GPIO
+	bool "Broadcom NSP GPIO (with PINCONF) driver"
+	depends on ARCH_BCM_NSP || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	select PINCONF
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP GPIO driver.
+
+	  The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
+	  supported by this driver.
+
+	  The ChipcommonA GPIO controller support basic PINCONF functions such
+	  as bias pull up, pull down, and drive strength configurations, when
+	  these pins are muxed to GPIO.
+
+config PINCTRL_NS2_MUX
+	bool "Broadcom Northstar2 pinmux driver"
+	depends on OF
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARM64 && ARCH_BCM_IPROC
+	help
+	  Say yes here to enable the Broadcom NS2 MUX driver.
+
+	  The Broadcom Northstar2 IOMUX driver supports group based IOMUX
+	  configuration.
+
+config PINCTRL_NSP_MUX
+	bool "Broadcom NSP IOMUX driver"
+	depends on (ARCH_BCM_NSP || COMPILE_TEST)
+	depends on OF
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP SOC IOMUX driver.
+
+	  The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX
+	  configuration, with certain individual pins can be overridden
+	  to GPIO function.