x86/amd_node: Fix PCI device reference counting in amd_smn_init()grafted

The local "root" pointer is a temporary variable used during the device
search. Therefore, refcount related to the search iterators should be cleaned
up after the search is complete.

Use the __free() cleanup macro to ensure the refcount is decremented when the
temporary pointer goes out of scope.

Additionally, increment the refcount when caching a root pointer. This ensures
the in-use refcount is separate from the temporary search refcounting.

Finally, drop the redundant "root = NULL" before the second search loop. The
pci_get_class() iterator always decrements the refcount of its "from"
argument, so the first loop can only fall through with "root" already NULL.

Fixes: 0a4b61d9c2e4 ("x86/amd_node: Fix AMD root device caching")
Closes: https://sashiko.dev/#/patchset/20260806160159.230453-1-jason.andryuk%40amd.com
Reported-by: Sashiko <sashiko-bot@kernel.org>
Assisted-by: LLM
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260903154325.74343-1-yazen.ghannam@amd.com

1 files changed, 123 insertions, 0 deletions

diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 000000000..b52c7eabe
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for TI platforms
+#
+config OMAP_CONTROL_PHY
+	tristate "OMAP CONTROL PHY Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	help
+	  Enable this to add support for the PHY part present in the control
+	  module. This driver has API to power on the USB2 PHY and to write to
+	  the mailbox. The mailbox is present only in omap4 and the register to
+	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+	  (PIPE3 PHY).
+
+config OMAP_USB2
+	tristate "OMAP USB2 PHY Driver"
+	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
+	help
+	  Enable this to support the transceiver that is part of SOC. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  The USB OTG controller communicates with the comparator using this
+	  driver.
+
+config PHY_AM654_SERDES
+	tristate "TI AM654 SERDES support"
+	depends on OF && (ARCH_K3 || COMPILE_TEST)
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	select MULTIPLEXER
+	select REGMAP_MMIO
+	select MUX_MMIO
+	help
+	  This option enables support for TI AM654 SerDes PHY used for
+	  PCIe.
+
+config PHY_DA8XX_USB
+	tristate "TI DA8xx USB PHY Driver"
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the USB PHY on DA8xx SoCs.
+
+	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
+config PHY_DM816X_USB
+	tristate "TI dm816x USB PHY driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this for dm816x USB to work.
+
+config PHY_J721E_WIZ
+	tristate "TI J721E WIZ (SERDES Wrapper) support"
+	depends on OF && (ARCH_K3 || COMPILE_TEST)
+	depends on HAS_IOMEM && OF_ADDRESS
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	select MULTIPLEXER
+	select REGMAP_MMIO
+	select MUX_MMIO
+	help
+	  This option enables support for WIZ module present in TI's J721E
+	  SoC. WIZ is a serdes wrapper used to configure some of the input
+	  signals to the SERDES (Sierra/Torrent). This driver configures
+	  three clock selects (pll0, pll1, dig) and resets for each of the
+	  lanes.
+
+config PHY_TI_DS125DF111
+	tristate "TI DS125DF111 2-Channel Retimer Driver"
+	depends on OF && I2C
+	select GENERIC_PHY
+	help
+	  Enable this to add support for configuration and runtime management
+	  of the TI DS125DF111 Multi-Protocol 2-Channel Retimer.
+	  The retimer is modeled as a Generic PHY and supports both 10G and 1G
+	  link speeds.
+
+config PHY_TI_GMII_SEL
+	tristate
+	select GENERIC_PHY
+	select REGMAP
+	help
+	  This driver supports configuring of the TI CPSW Port mode depending on
+	  the Ethernet PHY connected to the CPSW Port.
+
+config PHY_TUSB1210
+	tristate "TI TUSB1210 ULPI PHY module"
+	depends on USB_ULPI_BUS
+	select GENERIC_PHY
+	help
+	  Support for TI TUSB1210 USB ULPI PHY.
+
+config TI_PIPE3
+	tristate "TI PIPE3 PHY Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	select GENERIC_PHY
+	select OMAP_CONTROL_PHY
+	help
+	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  This driver interacts with the "OMAP Control PHY Driver" to power
+	  on/off the PHY.
+
+config TWL4030_USB
+	tristate "TWL4030 USB Transceiver Driver"
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	depends on USB_SUPPORT
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this to support the USB OTG transceiver on TWL4030
+	  family chips (including the TWL5030 and TPS659x0 devices).
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.