Merge tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linuxgrafted

Pull io_uring fixes from Jens Axboe:

 - Fix a task_work add use-after-free with SQPOLL.

   The sqpoll thread could pop and complete the last request while
   io_req_normal_work_add() was still looking at them after the mpscq
   push.

   Use the same approach as DEFER_TASKRUN to protect from that, holding
   an RCU read lock across the add, and have exit wait for an RCU grace
   period for SQPOLL rings as well.

 - CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
   big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
   rings

 - Mark the source filter table as COW when cloning bpf filters, so
   registering another filter on the source doesn't modify the shared
   table in place

 - Initialize the task context before running the BPF loop

 - Requeue zcrx multishot receives stopped by a local resource

 - End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)

* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  io_uring: fix task_work add use-after-free with SQPOLL
  io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
  io_uring/zcrx: requeue multishot receives stopped by a local resource
  io_uring: initialize task context before running the BPF loop
  io_uring: zero big_cqe for aux CQEs on CQE32 rings
  io_uring: fix free entry check for 32b CQEs on CQE32 rings
  io_uring: only post the dummy skip CQE on CQE_MIXED rings
  io_uring/bpf_filter: mark source as COW when cloning filters

1 files changed, 60 insertions, 0 deletions

diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
new file mode 100644
index 000000000..49206185e
--- /dev/null
+++ b/drivers/phy/st/Kconfig
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for STMicro platforms
+#
+config PHY_MIPHY28LP
+	tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
+	depends on ARCH_STI || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
+	  that is part of STMicroelectronics STiH407 SoC.
+
+config PHY_ST_SPEAR1310_MIPHY
+	tristate "ST SPEAR1310-MIPHY driver"
+	select GENERIC_PHY
+	depends on MACH_SPEAR1310 || COMPILE_TEST
+	help
+	  Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+config PHY_ST_SPEAR1340_MIPHY
+	tristate "ST SPEAR1340-MIPHY driver"
+	select GENERIC_PHY
+	depends on MACH_SPEAR1340 || COMPILE_TEST
+	help
+	  Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
+config PHY_STIH407_USB
+	tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+	depends on RESET_CONTROLLER
+	depends on ARCH_STI || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this support to enable the picoPHY device used by USB2
+	  and USB3 controllers on STMicroelectronics STiH407 SoC families.
+
+config PHY_STM32_COMBOPHY
+	tristate "STMicroelectronics COMBOPHY driver for STM32MP25"
+	depends on ARCH_STM32 || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support the COMBOPHY device used by USB3 or PCIe
+	  controllers on STMicroelectronics STM32MP25 SoC.
+	  This driver controls the COMBOPHY block to generate the PCIe 100Mhz
+	  reference clock from either the external clock generator or HSE
+	  internal SoC clock source.
+
+config PHY_STM32_USBPHYC
+	tristate "STMicroelectronics STM32 USB HS PHY Controller driver"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	help
+	  Enable this to support the High-Speed USB transceivers that are part
+	  of some STMicroelectronics STM32 SoCs.
+
+	  This driver controls the entire USB PHY block: the USB PHY controller
+	  (USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is
+	  used by an HS USB Host controller, and the second one is shared
+	  between an HS USB OTG controller and an HS USB Host controller,
+	  selected by a USB switch.