diff options
| author | Adrian Betschart <adrian.betschart@cinemaone.ch> | 2026-09-11 17:13:14 +0200 |
|---|---|---|
| committer | Alex Deucher <alexander.deucher@amd.com> | 2026-10-01 17:18:05 -0400 |
| commit | 106b4a2a78b2a2f14885604891957b84bba502db (patch) | |
| tree | 5d40eef2428fb1a4791ab46a4b19091a5910eac2 /drivers/phy/samsung | |
| download | linux-stable-106b4a2a78b2a2f14885604891957b84bba502db.tar.gz linux-stable-106b4a2a78b2a2f14885604891957b84bba502db.zip | |
drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted
amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.
That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.
Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.
For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.
Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)
Diffstat (limited to 'drivers/phy/samsung')
20 files changed, 6909 insertions, 0 deletions
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig new file mode 100644 index 000000000..b7ab40290 --- /dev/null +++ b/drivers/phy/samsung/Kconfig @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for Samsung platforms +# +config PHY_EXYNOS_DP_VIDEO + tristate "Exynos SoC series Display Port PHY driver" + depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS + select GENERIC_PHY + help + Support for Display Port PHY found on Samsung Exynos SoCs. + +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and Exynos SoCs. + +config PHY_EXYNOS_PCIE + bool "Exynos PCIe PHY driver" + depends on OF && (ARCH_EXYNOS || COMPILE_TEST) + select GENERIC_PHY + help + Enable PCIe PHY support for Exynos SoC series. + This driver provides PHY interface for Exynos PCIe controller. + +config PHY_SAMSUNG_UFS + tristate "Exynos SoC series UFS PHY driver" + depends on OF && (ARCH_EXYNOS || COMPILE_TEST) + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Samsung Exynos SoC UFS PHY driver for + Samsung Exynos SoCs. This driver provides the interface for UFS host + controller to do PHY related programming. + +config PHY_SAMSUNG_USB2 + tristate "S5P/Exynos SoC series USB 2.0 PHY driver" + depends on HAS_IOMEM + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + default ARCH_EXYNOS + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + S5Pv210 and Exynos SoCs. This driver provides the interface for USB + 2.0 PHY. Support for particular PHYs will be enabled based on the SoC + type in addition to this driver. + +config PHY_EXYNOS4210_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default CPU_EXYNOS4210 + +config PHY_EXYNOS4X12_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 + +config PHY_EXYNOS5250_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS5250 || SOC_EXYNOS5420 + +config PHY_S5PV210_USB2 + bool "Support for S5PV210" + depends on PHY_SAMSUNG_USB2 + depends on ARCH_S5PV210 || COMPILE_TEST + help + Enable USB PHY support for S5PV210. This option requires that Samsung + USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of S5PV210 two phys + are available - device and host. + +config PHY_EXYNOS5_USBDRD + tristate "Exynos5 SoC series USB DRD PHY driver" + depends on (ARCH_EXYNOS && OF) || COMPILE_TEST + depends on HAS_IOMEM + depends on TYPEC || !TYPEC + depends on USB_DWC3_EXYNOS + select GENERIC_PHY + select MFD_SYSCON + default ARCH_EXYNOS + help + Enable USB DRD PHY support for Exynos 5 SoC series. + This driver provides PHY interface for USB 3.0 DRD controller + present on Exynos5 SoC series. + +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile new file mode 100644 index 000000000..342682638 --- /dev/null +++ b/drivers/phy/samsung/Makefile @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o +obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-exynos-ufs.o +phy-exynos-ufs-y += phy-gs101-ufs.o +phy-exynos-ufs-y += phy-samsung-ufs.o +phy-exynos-ufs-y += phy-exynos7-ufs.o +phy-exynos-ufs-y += phy-exynosautov9-ufs.o +phy-exynos-ufs-y += phy-exynosautov920-ufs.o +phy-exynos-ufs-y += phy-fsd-ufs.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c new file mode 100644 index 000000000..a636dee07 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos-dp-video.c @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Exynos SoC series Display Port PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> + +struct exynos_dp_video_phy_drvdata { + u32 phy_ctrl_offset; +}; + +struct exynos_dp_video_phy { + struct regmap *regs; + const struct exynos_dp_video_phy_drvdata *drvdata; +}; + +static int exynos_dp_video_phy_power_on(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + /* Disable power isolation on DP-PHY */ + return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE); +} + +static int exynos_dp_video_phy_power_off(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + /* Enable power isolation on DP-PHY */ + return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS4_PHY_ENABLE, 0); +} + +static const struct phy_ops exynos_dp_video_phy_ops = { + .power_on = exynos_dp_video_phy_power_on, + .power_off = exynos_dp_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, +}; + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-dp-video-phy", + .data = &exynos5250_dp_video_phy, + }, { + .compatible = "samsung,exynos5420-dp-video-phy", + .data = &exynos5420_dp_video_phy, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + +static int exynos_dp_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_dp_video_phy *state; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct phy *phy; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->regs = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(state->regs)) + /* Backwards compatible way */ + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(state->regs)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(state->regs); + } + + state->drvdata = of_device_get_match_data(dev); + + phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Display Port PHY\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, state); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver exynos_dp_video_phy_driver = { + .probe = exynos_dp_video_phy_probe, + .driver = { + .name = "exynos-dp-video-phy", + .of_match_table = exynos_dp_video_phy_of_match, + .suppress_bind_attrs = true, + } +}; +module_platform_driver(exynos_dp_video_phy_driver); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("Samsung Exynos SoC DP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c new file mode 100644 index 000000000..be925508e --- /dev/null +++ b/drivers/phy/samsung/phy-exynos-mipi-video.c @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver + * + * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> +#include <linux/mfd/syscon.h> + +enum exynos_mipi_phy_id { + EXYNOS_MIPI_PHY_ID_NONE = -1, + EXYNOS_MIPI_PHY_ID_CSIS0, + EXYNOS_MIPI_PHY_ID_DSIM0, + EXYNOS_MIPI_PHY_ID_CSIS1, + EXYNOS_MIPI_PHY_ID_DSIM1, + EXYNOS_MIPI_PHY_ID_CSIS2, + EXYNOS_MIPI_PHYS_NUM +}; + +enum exynos_mipi_phy_regmap_id { + EXYNOS_MIPI_REGMAP_PMU, + EXYNOS_MIPI_REGMAP_DISP, + EXYNOS_MIPI_REGMAP_CAM0, + EXYNOS_MIPI_REGMAP_CAM1, + EXYNOS_MIPI_REGMAPS_NUM +}; + +struct mipi_phy_device_desc { + int num_phys; + int num_regmaps; + const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM]; + struct exynos_mipi_phy_desc { + enum exynos_mipi_phy_id coupled_phy_id; + u32 enable_val; + unsigned int enable_reg; + enum exynos_mipi_phy_regmap_id enable_map; + u32 resetn_val; + unsigned int resetn_reg; + enum exynos_mipi_phy_regmap_id resetn_map; + } phys[EXYNOS_MIPI_PHYS_NUM]; +}; + +static const struct mipi_phy_device_desc s5pv210_mipi_phy = { + .num_regmaps = 1, + .regmap_names = {"syscon"}, + .num_phys = 4, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, + }, +}; + +static const struct mipi_phy_device_desc exynos5420_mipi_phy = { + .num_regmaps = 1, + .regmap_names = {"syscon"}, + .num_phys = 5, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS2 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, + }, +}; + +#define EXYNOS5433_SYSREG_DISP_MIPI_PHY 0x100C +#define EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON 0x1014 +#define EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON 0x1020 + +static const struct mipi_phy_device_desc exynos5433_mipi_phy = { + .num_regmaps = 4, + .regmap_names = { + "samsung,pmu-syscon", + "samsung,disp-sysreg", + "samsung,cam0-sysreg", + "samsung,cam1-sysreg" + }, + .num_phys = 5, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY, + .resetn_map = EXYNOS_MIPI_REGMAP_DISP, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(1), + .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(1), + .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY, + .resetn_map = EXYNOS_MIPI_REGMAP_DISP, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS2 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM1, + }, + }, +}; + +static const struct mipi_phy_device_desc exynos7870_mipi_phy = { + .num_regmaps = 3, + .regmap_names = { + "samsung,pmu-syscon", + "samsung,disp-sysreg", + "samsung,cam0-sysreg" + }, + .num_phys = 4, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL0, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL0, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_DISP, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL1, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(1), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS2 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL2, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(2), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, + }, +}; + +struct exynos_mipi_video_phy { + struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM]; + int num_phys; + struct video_phy_desc { + struct phy *phy; + unsigned int index; + const struct exynos_mipi_phy_desc *data; + } phys[EXYNOS_MIPI_PHYS_NUM]; + spinlock_t slock; +}; + +static int __set_phy_state(const struct exynos_mipi_phy_desc *data, + struct exynos_mipi_video_phy *state, unsigned int on) +{ + struct regmap *enable_map = state->regmaps[data->enable_map]; + struct regmap *resetn_map = state->regmaps[data->resetn_map]; + + spin_lock(&state->slock); + + /* disable in PMU sysreg */ + if (!on && data->coupled_phy_id >= 0 && + state->phys[data->coupled_phy_id].phy->power_count == 0) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, 0); + /* PHY reset */ + if (on) + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, data->resetn_val); + else + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, 0); + /* enable in PMU sysreg */ + if (on) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, data->enable_val); + + spin_unlock(&state->slock); + + return 0; +} + +#define to_mipi_video_phy(desc) \ + container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]) + +static int exynos_mipi_video_phy_power_on(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(phy_desc->data, state, 1); +} + +static int exynos_mipi_video_phy_power_off(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(phy_desc->data, state, 0); +} + +static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= state->num_phys)) + return ERR_PTR(-ENODEV); + + return state->phys[args->args[0]].phy; +} + +static const struct phy_ops exynos_mipi_video_phy_ops = { + .power_on = exynos_mipi_video_phy_power_on, + .power_off = exynos_mipi_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_mipi_video_phy_probe(struct platform_device *pdev) +{ + const struct mipi_phy_device_desc *phy_dev; + struct exynos_mipi_video_phy *state; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + unsigned int i = 0; + + phy_dev = of_device_get_match_data(dev); + if (!phy_dev) + return -ENODEV; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->regmaps[i] = syscon_node_to_regmap(dev->parent->of_node); + if (!IS_ERR(state->regmaps[i])) + i++; + for (; i < phy_dev->num_regmaps; i++) { + state->regmaps[i] = syscon_regmap_lookup_by_phandle(np, + phy_dev->regmap_names[i]); + if (IS_ERR(state->regmaps[i])) + return PTR_ERR(state->regmaps[i]); + } + state->num_phys = phy_dev->num_phys; + spin_lock_init(&state->slock); + + dev_set_drvdata(dev, state); + + for (i = 0; i < state->num_phys; i++) { + struct phy *phy = devm_phy_create(dev, NULL, + &exynos_mipi_video_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + state->phys[i].phy = phy; + state->phys[i].index = i; + state->phys[i].data = &phy_dev->phys[i]; + phy_set_drvdata(phy, &state->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos_mipi_video_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id exynos_mipi_video_phy_of_match[] = { + { + .compatible = "samsung,s5pv210-mipi-video-phy", + .data = &s5pv210_mipi_phy, + }, { + .compatible = "samsung,exynos5420-mipi-video-phy", + .data = &exynos5420_mipi_phy, + }, { + .compatible = "samsung,exynos5433-mipi-video-phy", + .data = &exynos5433_mipi_phy, + }, { + .compatible = "samsung,exynos7870-mipi-video-phy", + .data = &exynos7870_mipi_phy, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); + +static struct platform_driver exynos_mipi_video_phy_driver = { + .probe = exynos_mipi_video_phy_probe, + .driver = { + .of_match_table = exynos_mipi_video_phy_of_match, + .name = "exynos-mipi-video-phy", + .suppress_bind_attrs = true, + } +}; +module_platform_driver(exynos_mipi_video_phy_driver); + +MODULE_DESCRIPTION("Samsung S5P/Exynos SoC MIPI CSI-2/DSI PHY driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c new file mode 100644 index 000000000..53c9230c2 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos-pcie.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Exynos SoC series PCIe PHY driver + * + * Phy provider for PCIe controller on Exynos SoC series + * + * Copyright (C) 2017-2020 Samsung Electronics Co., Ltd. + * Jaehoon Chung <jh80.chung@samsung.com> + */ + +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> + +#define PCIE_PHY_OFFSET(x) ((x) * 0x4) + +/* Sysreg FSYS register offsets and bits for Exynos5433 */ +#define PCIE_EXYNOS5433_PHY_MAC_RESET 0x0208 +#define PCIE_MAC_RESET_MASK 0xFF +#define PCIE_MAC_RESET BIT(4) +#define PCIE_EXYNOS5433_PHY_L1SUB_CM_CON 0x1010 +#define PCIE_REFCLK_GATING_EN BIT(0) +#define PCIE_EXYNOS5433_PHY_COMMON_RESET 0x1020 +#define PCIE_PHY_RESET BIT(0) +#define PCIE_EXYNOS5433_PHY_GLOBAL_RESET 0x1040 +#define PCIE_GLOBAL_RESET BIT(0) +#define PCIE_REFCLK BIT(1) +#define PCIE_REFCLK_MASK 0x16 +#define PCIE_APP_REQ_EXIT_L1_MODE BIT(5) + +/* PMU PCIE PHY isolation control */ +#define EXYNOS5433_PMU_PCIE_PHY_OFFSET 0x730 + +/* For Exynos pcie phy */ +struct exynos_pcie_phy { + void __iomem *base; + struct regmap *pmureg; + struct regmap *fsysreg; +}; + +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) +{ + writel(val, base + offset); +} + +/* Exynos5433 specific functions */ +static int exynos5433_pcie_phy_init(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_APP_REQ_EXIT_L1_MODE, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, 0); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, + PCIE_PHY_RESET, 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, + PCIE_MAC_RESET, 0); + + /* PHY refclk 24MHz */ + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_REFCLK_MASK, PCIE_REFCLK); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_GLOBAL_RESET, 0); + + + exynos_pcie_phy_writel(ep->base, 0x11, PCIE_PHY_OFFSET(0x3)); + + /* band gap reference on */ + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x20)); + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x4b)); + + /* jitter tuning */ + exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x4)); + exynos_pcie_phy_writel(ep->base, 0x02, PCIE_PHY_OFFSET(0x7)); + exynos_pcie_phy_writel(ep->base, 0x41, PCIE_PHY_OFFSET(0x21)); + exynos_pcie_phy_writel(ep->base, 0x7F, PCIE_PHY_OFFSET(0x14)); + exynos_pcie_phy_writel(ep->base, 0xC0, PCIE_PHY_OFFSET(0x15)); + exynos_pcie_phy_writel(ep->base, 0x61, PCIE_PHY_OFFSET(0x36)); + + /* D0 uninit.. */ + exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x3D)); + + /* 24MHz */ + exynos_pcie_phy_writel(ep->base, 0x94, PCIE_PHY_OFFSET(0x8)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x9)); + exynos_pcie_phy_writel(ep->base, 0x93, PCIE_PHY_OFFSET(0xA)); + exynos_pcie_phy_writel(ep->base, 0x6B, PCIE_PHY_OFFSET(0xC)); + exynos_pcie_phy_writel(ep->base, 0xA5, PCIE_PHY_OFFSET(0xF)); + exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x16)); + exynos_pcie_phy_writel(ep->base, 0xA3, PCIE_PHY_OFFSET(0x17)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x1A)); + exynos_pcie_phy_writel(ep->base, 0x71, PCIE_PHY_OFFSET(0x23)); + exynos_pcie_phy_writel(ep->base, 0x4C, PCIE_PHY_OFFSET(0x24)); + + exynos_pcie_phy_writel(ep->base, 0x0E, PCIE_PHY_OFFSET(0x26)); + exynos_pcie_phy_writel(ep->base, 0x14, PCIE_PHY_OFFSET(0x7)); + exynos_pcie_phy_writel(ep->base, 0x48, PCIE_PHY_OFFSET(0x43)); + exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x44)); + exynos_pcie_phy_writel(ep->base, 0x03, PCIE_PHY_OFFSET(0x45)); + exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x48)); + exynos_pcie_phy_writel(ep->base, 0x13, PCIE_PHY_OFFSET(0x54)); + exynos_pcie_phy_writel(ep->base, 0x04, PCIE_PHY_OFFSET(0x31)); + exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x32)); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, + PCIE_PHY_RESET, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, + PCIE_MAC_RESET_MASK, PCIE_MAC_RESET); + return 0; +} + +static int exynos5433_pcie_phy_exit(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, PCIE_REFCLK_GATING_EN); + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 0); + return 0; +} + +static const struct phy_ops exynos5433_phy_ops = { + .init = exynos5433_pcie_phy_init, + .exit = exynos5433_pcie_phy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id exynos_pcie_phy_match[] = { + { + .compatible = "samsung,exynos5433-pcie-phy", + }, + {}, +}; + +static int exynos_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct exynos_pcie_phy *exynos_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); + if (!exynos_phy) + return -ENOMEM; + + exynos_phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(exynos_phy->base)) + return PTR_ERR(exynos_phy->base); + + exynos_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(exynos_phy->pmureg)) { + dev_err(&pdev->dev, "PMU regmap lookup failed.\n"); + return PTR_ERR(exynos_phy->pmureg); + } + + exynos_phy->fsysreg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,fsys-sysreg"); + if (IS_ERR(exynos_phy->fsysreg)) { + dev_err(&pdev->dev, "FSYS sysreg regmap lookup failed.\n"); + return PTR_ERR(exynos_phy->fsysreg); + } + + generic_phy = devm_phy_create(dev, dev->of_node, &exynos5433_phy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, exynos_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver exynos_pcie_phy_driver = { + .probe = exynos_pcie_phy_probe, + .driver = { + .of_match_table = exynos_pcie_phy_match, + .name = "exynos_pcie_phy", + .suppress_bind_attrs = true, + } +}; +builtin_platform_driver(exynos_pcie_phy_driver); diff --git a/drivers/phy/samsung/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c new file mode 100644 index 000000000..3898a7f58 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos4210-usb2.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4210_UPHYPWR 0x0 + +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4210_UPHYCLK 0x4 + +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define EXYNOS_4210_UPHYRST 0x8 + +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) + +/* USBYPHY1 Floating prevention */ +#define EXYNOS_4210_UPHY1CON 0x34 +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4210_MODE_SWITCH_MASK 1 +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4210_MODE_SWITCH_HOST 1 + +enum exynos4210_phy_id { + EXYNOS4210_DEVICE, + EXYNOS4210_HOST, + EXYNOS4210_HSIC0, + EXYNOS4210_HSIC1, + EXYNOS4210_NUM_PHYS, +}; + +/* + * exynos4210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; + mask = EXYNOS_4210_USB_ISOL_DEVICE; + break; + case EXYNOS4210_HOST: + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_4210_USB_ISOL_HOST; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 clk; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + phypwr = EXYNOS_4210_UPHYPWR_PHY0; + rstbits = EXYNOS_4210_URSTCON_PHY0; + break; + case EXYNOS4210_HOST: + phypwr = EXYNOS_4210_UPHYPWR_PHY1; + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | + EXYNOS_4210_URSTCON_PHY1_P0 | + EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_ALL | + EXYNOS_4210_URSTCON_HOST_LINK_P0; + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); + break; + case EXYNOS4210_HSIC0: + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4210_HSIC1: + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P2; + break; + } + + if (on) { + clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK); + clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK); + + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + } +} + +static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst) +{ + /* Order of initialisation is important - first power then isolation */ + exynos4210_phy_pwr(inst, 1); + exynos4210_isol(inst, 0); + + return 0; +} + +static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst) +{ + exynos4210_isol(inst, 1); + exynos4210_phy_pwr(inst, 0); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4210_phys[] = { + { + .label = "device", + .id = EXYNOS4210_DEVICE, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "host", + .id = EXYNOS4210_HOST, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4210_HSIC0, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4210_HSIC1, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { + .has_mode_switch = 0, + .num_phys = EXYNOS4210_NUM_PHYS, + .phys = exynos4210_phys, + .rate_to_clk = exynos4210_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c new file mode 100644 index 000000000..b528a5d03 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4x12_UPHYPWR 0x0 + +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4x12_UPHYCLK 0x4 + +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) + +#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8) + +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) + +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10 +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) + +/* PHY reset control */ +#define EXYNOS_4x12_UPHYRST 0x8 + +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) +/* The following bit defines are presented in the + * order taken from the Exynos4412 reference manual. + * + * During experiments with the hardware and debugging + * it was determined that the hardware behaves contrary + * to the manual. + * + * The following bit values were chaned accordingly to the + * results of real hardware experiments. + */ +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(6) +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(5) +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(10) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(8) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS4x12_DEVICE, + EXYNOS4x12_HOST, + EXYNOS4x12_HSIC0, + EXYNOS4x12_HSIC1, + EXYNOS4x12_NUM_PHYS, +}; + +/* + * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + case EXYNOS4x12_HOST: + offset = EXYNOS_4x12_USB_ISOL_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_OTG; + break; + case EXYNOS4x12_HSIC0: + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC0; + break; + case EXYNOS4x12_HSIC1: + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC1; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 clk; + + clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); + clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; + + if (drv->cfg->has_refclk_sel) + clk = EXYNOS_3250_UPHYCLK_REFCLKSEL; + + clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; + clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON; + writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); +} + +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; + rstbits = EXYNOS_4x12_URSTCON_PHY0; + break; + case EXYNOS4x12_HOST: + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY | + EXYNOS_4x12_URSTCON_PHY1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P0; + break; + case EXYNOS4x12_HSIC0: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; + rstbits = EXYNOS_4x12_URSTCON_HSIC0 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4x12_HSIC1: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + } + + if (on) { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + } +} + +static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst) +{ + if (inst->int_cnt++ > 0) + return; + + exynos4x12_setup_clk(inst); + exynos4x12_isol(inst, 0); + exynos4x12_phy_pwr(inst, 1); +} + +static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + if (inst->ext_cnt++ > 0) + return 0; + + if (inst->cfg->id == EXYNOS4x12_HOST) { + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_HOST); + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); + } + + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_DEVICE); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 || + inst->cfg->id == EXYNOS4x12_HSIC1) { + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]); + } + + exynos4x12_power_on_int(inst); + + return 0; +} + +static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst) +{ + if (inst->int_cnt-- > 1) + return; + + exynos4x12_isol(inst, 1); + exynos4x12_phy_pwr(inst, 0); +} + +static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + if (inst->ext_cnt-- > 1) + return 0; + + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_HOST); + + if (inst->cfg->id == EXYNOS4x12_HOST) + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 || + inst->cfg->id == EXYNOS4x12_HSIC1) { + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]); + } + + exynos4x12_power_off_int(inst); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { + { + .label = "device", + .id = EXYNOS4x12_DEVICE, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "host", + .id = EXYNOS4x12_HOST, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4x12_HSIC0, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4x12_HSIC1, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = { + .has_refclk_sel = 1, + .num_phys = 1, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; + +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS4x12_NUM_PHYS, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c new file mode 100644 index 000000000..8711a3b62 --- /dev/null +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -0,0 +1,3071 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Exynos5 SoC series USB DRD PHY driver + * + * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series + * + * Copyright (C) 2014 Samsung Electronics Co., Ltd. + * Author: Vivek Gautam <gautam.vivek@samsung.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/iopoll.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_mux.h> + +/* Exynos USB PHY registers */ +#define EXYNOS5_FSEL_9MHZ6 0x0 +#define EXYNOS5_FSEL_10MHZ 0x1 +#define EXYNOS5_FSEL_12MHZ 0x2 +#define EXYNOS5_FSEL_19MHZ2 0x3 +#define EXYNOS5_FSEL_20MHZ 0x4 +#define EXYNOS5_FSEL_24MHZ 0x5 +#define EXYNOS5_FSEL_26MHZ 0x6 +#define EXYNOS5_FSEL_50MHZ 0x7 + +/* USB 3.2 DRD 4nm PHY link controller registers */ +#define EXYNOS2200_DRD_CLKRST 0x0c +#define EXYNOS2200_CLKRST_LINK_PCLK_SEL BIT(1) + +#define EXYNOS2200_DRD_UTMI 0x10 + +/* ExynosAutov920 bits */ +#define UTMICTL_FORCE_UTMI_SUSPEND BIT(13) +#define UTMICTL_FORCE_UTMI_SLEEP BIT(12) +#define UTMICTL_FORCE_DPPULLDOWN BIT(9) +#define UTMICTL_FORCE_DMPULLDOWN BIT(8) + +#define EXYNOS2200_UTMI_FORCE_VBUSVALID BIT(1) +#define EXYNOS2200_UTMI_FORCE_BVALID BIT(0) + +#define EXYNOS2200_DRD_HSP_MISC 0x114 +#define HSP_MISC_SET_REQ_IN2 BIT(4) +#define HSP_MISC_RES_TUNE GENMASK(1, 0) +#define RES_TUNE_PHY1_PHY2 0x1 +#define RES_TUNE_PHY1 0x2 +#define RES_TUNE_PHY2 0x3 + +/* Exynos5: USB 3.0 DRD PHY registers */ +#define EXYNOS5_DRD_LINKSYSTEM 0x04 +#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) +#define LINKSYSTEM_FORCE_VBUSVALID BIT(8) +#define LINKSYSTEM_FORCE_BVALID BIT(7) +#define LINKSYSTEM_FLADJ GENMASK(6, 1) + +#define EXYNOS5_DRD_PHYUTMI 0x08 +#define PHYUTMI_UTMI_SUSPEND_COM_N BIT(12) +#define PHYUTMI_UTMI_L1_SUSPEND_COM_N BIT(11) +#define PHYUTMI_VBUSVLDEXTSEL BIT(10) +#define PHYUTMI_VBUSVLDEXT BIT(9) +#define PHYUTMI_TXBITSTUFFENH BIT(8) +#define PHYUTMI_TXBITSTUFFEN BIT(7) +#define PHYUTMI_OTGDISABLE BIT(6) +#define PHYUTMI_IDPULLUP BIT(5) +#define PHYUTMI_DRVVBUS BIT(4) +#define PHYUTMI_DPPULLDOWN BIT(3) +#define PHYUTMI_DMPULLDOWN BIT(2) +#define PHYUTMI_FORCESUSPEND BIT(1) +#define PHYUTMI_FORCESLEEP BIT(0) + +#define EXYNOS5_DRD_PHYPIPE 0x0c + +#define EXYNOS5_DRD_PHYCLKRST 0x10 +#define PHYCLKRST_EN_UTMISUSPEND BIT(31) +#define PHYCLKRST_SSC_REFCLKSEL GENMASK(30, 23) +#define PHYCLKRST_SSC_RANGE GENMASK(22, 21) +#define PHYCLKRST_SSC_EN BIT(20) +#define PHYCLKRST_REF_SSP_EN BIT(19) +#define PHYCLKRST_REF_CLKDIV2 BIT(18) +#define PHYCLKRST_MPLL_MULTIPLIER GENMASK(17, 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF 0x19 +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF 0x32 +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF 0x68 +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF 0x7d +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF 0x02 +#define PHYCLKRST_FSEL_PIPE GENMASK(10, 8) +#define PHYCLKRST_FSEL_UTMI GENMASK(7, 5) +#define PHYCLKRST_FSEL_PAD_100MHZ 0x27 +#define PHYCLKRST_FSEL_PAD_24MHZ 0x2a +#define PHYCLKRST_FSEL_PAD_20MHZ 0x31 +#define PHYCLKRST_FSEL_PAD_19_2MHZ 0x38 +#define PHYCLKRST_RETENABLEN BIT(4) +#define PHYCLKRST_REFCLKSEL GENMASK(3, 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK 0x2 +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK 0x3 +#define PHYCLKRST_PORTRESET BIT(1) +#define PHYCLKRST_COMMONONN BIT(0) + +#define EXYNOS5_DRD_PHYREG0 0x14 +#define PHYREG0_SSC_REF_CLK_SEL BIT(21) +#define PHYREG0_SSC_RANGE BIT(20) +#define PHYREG0_CR_WRITE BIT(19) +#define PHYREG0_CR_READ BIT(18) +#define PHYREG0_CR_DATA_IN GENMASK(17, 2) +#define PHYREG0_CR_CAP_DATA BIT(1) +#define PHYREG0_CR_CAP_ADDR BIT(0) + +#define EXYNOS5_DRD_PHYREG1 0x18 +#define PHYREG0_CR_DATA_OUT GENMASK(16, 1) +#define PHYREG1_CR_ACK BIT(0) + +#define EXYNOS5_DRD_PHYPARAM0 0x1c +#define PHYPARAM0_REF_USE_PAD BIT(31) +#define PHYPARAM0_REF_LOSLEVEL GENMASK(30, 26) +#define PHYPARAM0_REF_LOSLEVEL_VAL 0x9 +#define PHYPARAM0_TXVREFTUNE GENMASK(25, 22) +#define PHYPARAM0_TXRISETUNE GENMASK(21, 20) +#define PHYPARAM0_TXRESTUNE GENMASK(19, 18) +#define PHYPARAM0_TXPREEMPPULSETUNE BIT(17) +#define PHYPARAM0_TXPREEMPAMPTUNE GENMASK(16, 15) +#define PHYPARAM0_TXHSXVTUNE GENMASK(14, 13) +#define PHYPARAM0_TXFSLSTUNE GENMASK(12, 9) +#define PHYPARAM0_SQRXTUNE GENMASK(8, 6) +#define PHYPARAM0_OTGTUNE GENMASK(5, 3) +#define PHYPARAM0_COMPDISTUNE GENMASK(2, 0) + +#define EXYNOS5_DRD_PHYPARAM1 0x20 +#define PHYPARAM1_PCS_TXDEEMPH GENMASK(4, 0) +#define PHYPARAM1_PCS_TXDEEMPH_VAL 0x1c + +#define EXYNOS5_DRD_PHYTERM 0x24 + +#define EXYNOS5_DRD_PHYTEST 0x28 +#define PHYTEST_POWERDOWN_SSP BIT(3) +#define PHYTEST_POWERDOWN_HSP BIT(2) + +#define EXYNOS5_DRD_PHYADP 0x2c + +#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30 +#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2) + +#define EXYNOS5_DRD_PHYRESUME 0x34 + +#define EXYNOS5_DRD_LINKPORT 0x44 +#define LINKPORT_HOST_U3_PORT_DISABLE BIT(8) +#define LINKPORT_HOST_U2_PORT_DISABLE BIT(7) +#define LINKPORT_HOST_PORT_OVCR_U3 BIT(5) +#define LINKPORT_HOST_PORT_OVCR_U2 BIT(4) +#define LINKPORT_HOST_PORT_OVCR_U3_SEL BIT(3) +#define LINKPORT_HOST_PORT_OVCR_U2_SEL BIT(2) + +/* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */ +#define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN (0x15) +#define LOSLEVEL_OVRD_IN_LOS_BIAS_5420 (0x5 << 13) +#define LOSLEVEL_OVRD_IN_LOS_BIAS_DEFAULT (0x0 << 13) +#define LOSLEVEL_OVRD_IN_EN (0x1 << 10) +#define LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT (0x9 << 0) + +#define EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN (0x12) +#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420 (0x5 << 13) +#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_DEFAULT (0x4 << 13) + +#define EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG (0x1010) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M (0x4 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M (0x8 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_25M_26M (0x8 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M (0x20 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4) +#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4) + +/* Exynos7870: USB DRD PHY registers */ +#define EXYNOS7870_DRD_PHYPCSVAL 0x3C +#define PHYPCSVAL_PCS_RX_LOS_MASK GENMASK(9, 0) + +#define EXYNOS7870_DRD_PHYPARAM2 0x50 +#define PHYPARAM2_TX_VBOOST_LVL GENMASK(6, 4) +#define PHYPARAM2_LOS_BIAS GENMASK(2, 0) + +#define EXYNOS7870_DRD_HSPHYCTRL 0x54 +#define HSPHYCTRL_PHYSWRSTALL BIT(31) +#define HSPHYCTRL_SIDDQ BIT(6) +#define HSPHYCTRL_PHYSWRST BIT(0) + +#define EXYNOS7870_DRD_HSPHYPLLTUNE 0x70 +#define HSPHYPLLTUNE_PLL_B_TUNE BIT(6) +#define HSPHYPLLTUNE_PLL_I_TUNE GENMASK(5, 4) +#define HSPHYPLLTUNE_PLL_P_TUNE GENMASK(3, 0) + +/* Exynos850: USB DRD PHY registers */ +#define EXYNOS850_DRD_LINKCTRL 0x04 +#define LINKCTRL_FORCE_RXELECIDLE BIT(18) +#define LINKCTRL_FORCE_PHYSTATUS BIT(17) +#define LINKCTRL_FORCE_PIPE_EN BIT(16) +#define LINKCTRL_FORCE_QACT BIT(8) +#define LINKCTRL_BUS_FILTER_BYPASS GENMASK(7, 4) + +#define EXYNOS850_DRD_LINKPORT 0x08 +#define LINKPORT_HOST_NUM_U3 GENMASK(19, 16) +#define LINKPORT_HOST_NUM_U2 GENMASK(15, 12) + +#define EXYNOS850_DRD_CLKRST 0x20 +/* + * On versions without SS ports (like E850), bit 3 is for the 2.0 phy (HS), + * while on versions with (like gs101), bits 2 and 3 are for the 3.0 phy (SS) + * and bits 12 & 13 for the 2.0 phy. + */ +#define CLKRST_PHY20_SW_POR BIT(13) +#define CLKRST_PHY20_SW_POR_SEL BIT(12) +#define CLKRST_LINK_PCLK_SEL BIT(7) +#define CLKRST_PHY_SW_RST BIT(3) +#define CLKRST_PHY_RESET_SEL BIT(2) +#define CLKRST_PORT_RST BIT(1) +#define CLKRST_LINK_SW_RST BIT(0) + +#define EXYNOS850_DRD_SSPPLLCTL 0x30 +#define SSPPLLCTL_FSEL GENMASK(2, 0) + +#define EXYNOS850_DRD_UTMI 0x50 +#define UTMI_FORCE_VBUSVALID BIT(5) +#define UTMI_FORCE_BVALID BIT(4) +#define UTMI_DP_PULLDOWN BIT(3) +#define UTMI_DM_PULLDOWN BIT(2) +#define UTMI_FORCE_SUSPEND BIT(1) +#define UTMI_FORCE_SLEEP BIT(0) + +#define EXYNOS850_DRD_HSP 0x54 +#define HSP_FSV_OUT_EN BIT(24) +#define HSP_VBUSVLDEXTSEL BIT(13) +#define HSP_VBUSVLDEXT BIT(12) +#define HSP_EN_UTMISUSPEND BIT(9) +#define HSP_COMMONONN BIT(8) + +#define EXYNOS850_DRD_HSPPARACON 0x58 +#define HSPPARACON_TXVREF GENMASK(31, 28) +#define HSPPARACON_TXRISE GENMASK(25, 24) +#define HSPPARACON_TXRES GENMASK(22, 21) +#define HSPPARACON_TXPREEMPPULSE BIT(20) +#define HSPPARACON_TXPREEMPAMP GENMASK(19, 18) +#define HSPPARACON_TXHSXV GENMASK(17, 16) +#define HSPPARACON_TXFSLS GENMASK(15, 12) +#define HSPPARACON_SQRX GENMASK(10, 8) +#define HSPPARACON_OTG GENMASK(6, 4) +#define HSPPARACON_COMPDIS GENMASK(2, 0) + +#define EXYNOS850_DRD_HSP_TEST 0x5c +#define HSP_TEST_SIDDQ BIT(24) + +#define EXYNOSAUTOV920_DRD_HSP_CLKRST 0x100 +#define HSPCLKRST_PHY20_SW_PORTRESET BIT(3) +#define HSPCLKRST_PHY20_SW_POR BIT(1) +#define HSPCLKRST_PHY20_SW_POR_SEL BIT(0) + +#define EXYNOSAUTOV920_DRD_HSPCTL 0x104 +#define HSPCTRL_VBUSVLDEXTSEL BIT(13) +#define HSPCTRL_VBUSVLDEXT BIT(12) +#define HSPCTRL_EN_UTMISUSPEND BIT(9) +#define HSPCTRL_COMMONONN BIT(8) + +#define EXYNOSAUTOV920_DRD_HSP_TEST 0x10c + +#define EXYNOSAUTOV920_DRD_HSPPLLTUNE 0x110 +#define HSPPLLTUNE_FSEL GENMASK(18, 16) + +/* ExynosAutov920 phy usb31drd port reg */ +#define EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL 0x000 +#define PHY_RST_CTRL_PIPE_LANE0_RESET_N_OVRD_EN BIT(5) +#define PHY_RST_CTRL_PIPE_LANE0_RESET_N BIT(4) +#define PHY_RST_CTRL_PHY_RESET_OVRD_EN BIT(1) +#define PHY_RST_CTRL_PHY_RESET BIT(0) + +#define EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0 0x0004 +#define PHY_CR_PARA_CON0_PHY0_CR_PARA_ADDR GENMASK(31, 16) +#define PHY_CR_PARA_CON0_PHY0_CR_PARA_CLK BIT(8) +#define PHY_CR_PARA_CON0_PHY0_CR_PARA_ACK BIT(4) +#define PHY_CR_PARA_CON0_PHY0_CR_PARA_SEL BIT(0) + +#define EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON1 0x0008 + +#define EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON2 0x000c +#define PHY_CR_PARA_CON2_PHY0_CR_PARA_WR_EN BIT(0) +#define PHY_CR_PARA_CON2_PHY0_CR_PARA_WR_DATA GENMASK(31, 16) + +#define EXYNOSAUTOV920_USB31DRD_PHY_CONFIG0 0x100 +#define PHY_CONFIG0_PHY0_PMA_PWR_STABLE BIT(14) +#define PHY_CONFIG0_PHY0_PCS_PWR_STABLE BIT(13) +#define PHY_CONFIG0_PHY0_ANA_PWR_EN BIT(1) + +#define EXYNOSAUTOV920_USB31DRD_PHY_CONFIG7 0x11c +#define PHY_CONFIG7_PHY_TEST_POWERDOWN BIT(24) + +#define EXYNOSAUTOV920_USB31DRD_PHY_CONFIG4 0x110 +#define PHY_CONFIG4_PIPE_RX0_SRIS_MODE_EN BIT(2) + +/* Exynos9 - GS101 */ +#define EXYNOS850_DRD_SECPMACTL 0x48 +#define SECPMACTL_PMA_ROPLL_REF_CLK_SEL GENMASK(13, 12) +#define SECPMACTL_PMA_LCPLL_REF_CLK_SEL GENMASK(11, 10) +#define SECPMACTL_PMA_REF_FREQ_SEL GENMASK(9, 8) +#define SECPMACTL_PMA_LOW_PWR BIT(4) +#define SECPMACTL_PMA_TRSV_SW_RST BIT(3) +#define SECPMACTL_PMA_CMN_SW_RST BIT(2) +#define SECPMACTL_PMA_INIT_SW_RST BIT(1) +#define SECPMACTL_PMA_APB_SW_RST BIT(0) + +/* PMA registers */ +#define EXYNOS9_PMA_USBDP_CMN_REG0008 0x0020 +#define CMN_REG0008_OVRD_AUX_EN BIT(3) +#define CMN_REG0008_AUX_EN BIT(2) + +#define EXYNOS9_PMA_USBDP_CMN_REG00B8 0x02e0 +#define CMN_REG00B8_LANE_MUX_SEL_DP GENMASK(3, 0) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE3 BIT(3) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE2 BIT(2) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE1 BIT(1) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE0 BIT(0) + +#define EXYNOS9_PMA_USBDP_CMN_REG01C0 0x0700 +#define CMN_REG01C0_ANA_LCPLL_LOCK_DONE BIT(7) +#define CMN_REG01C0_ANA_LCPLL_AFC_DONE BIT(6) + +/* these have similar register layout, for lanes 0 and 2 */ +#define EXYNOS9_PMA_USBDP_TRSV_REG03C3 0x0f0c +#define EXYNOS9_PMA_USBDP_TRSV_REG07C3 0x1f0c +#define TRSV_REG03C3_LN0_MON_RX_CDR_AFC_DONE BIT(3) +#define TRSV_REG03C3_LN0_MON_RX_CDR_CAL_DONE BIT(2) +#define TRSV_REG03C3_LN0_MON_RX_CDR_FLD_PLL_MODE_DONE BIT(1) +#define TRSV_REG03C3_LN0_MON_RX_CDR_LOCK_DONE BIT(0) + +/* TRSV_REG0413 and TRSV_REG0813 have similar register layout */ +#define EXYNOS9_PMA_USBDP_TRSV_REG0413 0x104c +#define TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN BIT(7) +#define TRSV_REG0413_OVRD_LN1_TX_RXD_EN BIT(5) + +#define EXYNOS9_PMA_USBDP_TRSV_REG0813 0x204c +#define TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN BIT(7) +#define TRSV_REG0813_OVRD_LN3_TX_RXD_EN BIT(5) + +/* PCS registers */ +#define EXYNOS9_PCS_NS_VEC_PS1_N1 0x010c +#define EXYNOS9_PCS_NS_VEC_PS2_N0 0x0110 +#define EXYNOS9_PCS_NS_VEC_PS3_N0 0x0118 +#define NS_VEC_NS_REQ GENMASK(31, 24) +#define NS_VEC_ENABLE_TIMER BIT(22) +#define NS_VEC_SEL_TIMEOUT GENMASK(21, 20) +#define NS_VEC_INV_MASK GENMASK(19, 16) +#define NS_VEC_COND_MASK GENMASK(11, 8) +#define NS_VEC_EXP_COND GENMASK(3, 0) + +#define EXYNOS9_PCS_OUT_VEC_2 0x014c +#define EXYNOS9_PCS_OUT_VEC_3 0x0150 +#define PCS_OUT_VEC_B9_DYNAMIC BIT(19) +#define PCS_OUT_VEC_B9_SEL_OUT BIT(18) +#define PCS_OUT_VEC_B8_DYNAMIC BIT(17) +#define PCS_OUT_VEC_B8_SEL_OUT BIT(16) +#define PCS_OUT_VEC_B7_DYNAMIC BIT(15) +#define PCS_OUT_VEC_B7_SEL_OUT BIT(14) +#define PCS_OUT_VEC_B6_DYNAMIC BIT(13) +#define PCS_OUT_VEC_B6_SEL_OUT BIT(12) +#define PCS_OUT_VEC_B5_DYNAMIC BIT(11) +#define PCS_OUT_VEC_B5_SEL_OUT BIT(10) +#define PCS_OUT_VEC_B4_DYNAMIC BIT(9) +#define PCS_OUT_VEC_B4_SEL_OUT BIT(8) +#define PCS_OUT_VEC_B3_DYNAMIC BIT(7) +#define PCS_OUT_VEC_B3_SEL_OUT BIT(6) +#define PCS_OUT_VEC_B2_DYNAMIC BIT(5) +#define PCS_OUT_VEC_B2_SEL_OUT BIT(4) +#define PCS_OUT_VEC_B1_DYNAMIC BIT(3) +#define PCS_OUT_VEC_B1_SEL_OUT BIT(2) +#define PCS_OUT_VEC_B0_DYNAMIC BIT(1) +#define PCS_OUT_VEC_B0_SEL_OUT BIT(0) + +#define EXYNOS9_PCS_TIMEOUT_0 0x0170 + +#define EXYNOS9_PCS_TIMEOUT_3 0x017c + +#define EXYNOS9_PCS_EBUF_PARAM 0x0304 +#define EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE GENMASK(29, 24) + +#define EXYNOS9_PCS_BACK_END_MODE_VEC 0x030c +#define BACK_END_MODE_VEC_FORCE_EBUF_EMPTY_MODE BIT(1) +#define BACK_END_MODE_VEC_DISABLE_DATA_MASK BIT(0) + +#define EXYNOS9_PCS_RX_CONTROL 0x03f0 +#define RX_CONTROL_EN_BLOCK_ALIGNER_TYPE_B BIT(22) + +#define EXYNOS9_PCS_RX_CONTROL_DEBUG 0x03f4 +#define RX_CONTROL_DEBUG_EN_TS_CHECK BIT(5) +#define RX_CONTROL_DEBUG_NUM_COM_FOUND GENMASK(3, 0) + +#define EXYNOS9_PCS_LOCAL_COEF 0x040c +#define LOCAL_COEF_PMA_CENTER_COEF GENMASK(21, 16) +#define LOCAL_COEF_LF GENMASK(13, 8) +#define LOCAL_COEF_FS GENMASK(5, 0) + +#define EXYNOS9_PCS_HS_TX_COEF_MAP_0 0x0410 +#define HS_TX_COEF_MAP_0_SSTX_DEEMP GENMASK(17, 12) +#define HS_TX_COEF_MAP_0_SSTX_LEVEL GENMASK(11, 6) +#define HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT GENMASK(5, 0) + + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +#define PHY_TUNING_ENTRY_PHY(o, m, v) { \ + .off = (o), \ + .mask = (m), \ + .val = (v), \ + .region = PTR_PHY \ + } + +#define PHY_TUNING_ENTRY_PCS(o, m, v) { \ + .off = (o), \ + .mask = (m), \ + .val = (v), \ + .region = PTR_PCS \ + } + +#define PHY_TUNING_ENTRY_PMA(o, m, v) { \ + .off = (o), \ + .mask = (m), \ + .val = (v), \ + .region = PTR_PMA, \ + } + +#define PHY_TUNING_ENTRY_LAST { .region = PTR_INVALID } + +#define for_each_phy_tune(tune) \ + for (; (tune)->region != PTR_INVALID; ++(tune)) + +struct exynos5_usbdrd_phy_tuning { + u32 off; + u32 mask; + u32 val; + char region; +#define PTR_INVALID 0 +#define PTR_PHY 1 +#define PTR_PCS 2 +#define PTR_PMA 3 +}; + +enum exynos5_usbdrd_phy_tuning_state { + PTS_UTMI_POSTINIT, + PTS_PIPE3_PREINIT, + PTS_PIPE3_INIT, + PTS_PIPE3_POSTINIT, + PTS_PIPE3_POSTLOCK, + PTS_MAX, +}; + +enum exynos5_usbdrd_phy_id { + EXYNOS5_DRDPHY_UTMI, + EXYNOS5_DRDPHY_PIPE3, + EXYNOS5_DRDPHYS_NUM, +}; + +struct phy_usb_instance; +struct exynos5_usbdrd_phy; + +struct exynos5_usbdrd_phy_config { + u32 id; + void (*phy_isol)(struct phy_usb_instance *inst, bool isolate); + void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd); + unsigned int (*set_refclk)(struct phy_usb_instance *inst); +}; + +struct exynos5_usbdrd_phy_drvdata { + const struct exynos5_usbdrd_phy_config *phy_cfg; + const struct exynos5_usbdrd_phy_tuning **phy_tunes; + const struct phy_ops *phy_ops; + const char * const *clk_names; + int n_clks; + const char * const *core_clk_names; + int n_core_clks; + const char * const *regulator_names; + int n_regulators; + u32 pmu_offset_usbdrd0_phy; + u32 pmu_offset_usbdrd0_phy_ss; + u32 pmu_offset_usbdrd1_phy; +}; + +/** + * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY + * @dev: pointer to device instance of this platform device + * @reg_phy: usb phy controller register memory base + * @reg_pcs: usb phy physical coding sublayer register memory base + * @reg_pma: usb phy physical media attachment register memory base + * @clks: clocks for register access + * @core_clks: core clocks for phy (ref, pipe3, utmi+, ITP, etc. as required) + * @drv_data: pointer to SoC level driver data structure + * @hs_phy: pointer to non-Samsung IP high-speed phy controller + * @phy_mutex: mutex protecting phy_init/exit & TCPC callbacks + * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY + * instances each with its 'phy' and 'phy_cfg'. + * @extrefclk: frequency select settings when using 'separate + * reference clocks' for SS and HS operations + * @regulators: regulators for phy + * @sw: TypeC orientation switch handle + * @orientation: TypeC connector orientation - normal or flipped + */ +struct exynos5_usbdrd_phy { + struct device *dev; + void __iomem *reg_phy; + void __iomem *reg_pcs; + void __iomem *reg_pma; + struct clk_bulk_data *clks; + struct clk_bulk_data *core_clks; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy *hs_phy; + struct mutex phy_mutex; + struct phy_usb_instance { + struct phy *phy; + u32 index; + struct regmap *reg_pmu; + u32 pmu_offset; + const struct exynos5_usbdrd_phy_config *phy_cfg; + } phys[EXYNOS5_DRDPHYS_NUM]; + u32 extrefclk; + struct regulator_bulk_data *regulators; + + struct typec_switch_dev *sw; + enum typec_orientation orientation; +}; + +static inline +struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst) +{ + return container_of((inst), struct exynos5_usbdrd_phy, + phys[(inst)->index]); +} + +/* + * exynos5_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS5_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS5_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS5_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS5_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS5_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS5_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS5_FSEL_24MHZ; + break; + case 26 * MHZ: + *reg = EXYNOS5_FSEL_26MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS5_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, + bool isolate) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = isolate ? 0 : EXYNOS4_PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS4_PHY_ENABLE, val); +} + +/* + * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets multiplier values and spread spectrum + * clock settings for SuperSpeed operations. + */ +static unsigned int +exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) +{ + u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Use EXTREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_EXT_REFCLK); + + /* FSEL settings corresponding to reference clock */ + reg &= ~(PHYCLKRST_FSEL_PIPE | + PHYCLKRST_MPLL_MULTIPLIER | + PHYCLKRST_SSC_REFCLKSEL); + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x00) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_50M_REF)); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x88) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF)); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x00) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF)); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x88) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF)); + break; + default: + dev_dbg(phy_drd->dev, "unsupported ref clk\n"); + break; + } + + return reg; +} + +/* + * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets the FSEL values for HighSpeed operations. + */ +static unsigned int +exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) +{ + u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_EXT_REFCLK); + + reg &= ~(PHYCLKRST_FSEL_UTMI | + PHYCLKRST_MPLL_MULTIPLIER | + PHYCLKRST_SSC_REFCLKSEL); + reg |= FIELD_PREP(PHYCLKRST_FSEL_UTMI, phy_drd->extrefclk); + + return reg; +} + +static void +exynos5_usbdrd_apply_phy_tunes(struct exynos5_usbdrd_phy *phy_drd, + enum exynos5_usbdrd_phy_tuning_state state) +{ + const struct exynos5_usbdrd_phy_tuning *tune; + + tune = phy_drd->drv_data->phy_tunes[state]; + if (!tune) + return; + + for_each_phy_tune(tune) { + void __iomem *reg_base; + u32 reg = 0; + + switch (tune->region) { + case PTR_PHY: + reg_base = phy_drd->reg_phy; + break; + case PTR_PCS: + reg_base = phy_drd->reg_pcs; + break; + case PTR_PMA: + reg_base = phy_drd->reg_pma; + break; + default: + dev_warn_once(phy_drd->dev, + "unknown phy region %d\n", tune->region); + continue; + } + + if (~tune->mask) { + reg = readl(reg_base + tune->off); + reg &= ~tune->mask; + } + reg |= tune->val; + writel(reg, reg_base + tune->off); + } +} + +static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH; + reg |= FIELD_PREP(PHYPARAM1_PCS_TXDEEMPH, PHYPARAM1_PCS_TXDEEMPH_VAL); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_SSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static void +exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* link pipe_clock selection to pclk of PMA */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_LINK_PCLK_SEL; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg &= ~SECPMACTL_PMA_REF_FREQ_SEL; + reg |= FIELD_PREP(SECPMACTL_PMA_REF_FREQ_SEL, 1); + /* SFR reset */ + reg |= (SECPMACTL_PMA_LOW_PWR | SECPMACTL_PMA_APB_SW_RST); + reg &= ~(SECPMACTL_PMA_ROPLL_REF_CLK_SEL | + SECPMACTL_PMA_LCPLL_REF_CLK_SEL); + /* PMA power off */ + reg |= (SECPMACTL_PMA_TRSV_SW_RST | SECPMACTL_PMA_CMN_SW_RST | + SECPMACTL_PMA_INIT_SW_RST); + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); + + udelay(1); + + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg &= ~SECPMACTL_PMA_LOW_PWR; + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); + + udelay(1); + + /* release override */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg &= ~LINKCTRL_FORCE_PIPE_EN; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + udelay(1); + + /* APB enable */ + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg &= ~SECPMACTL_PMA_APB_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); +} + +static void +exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_pma; + u32 reg; + + /* lane configuration: USB on all lanes */ + reg = readl(regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); + reg &= ~CMN_REG00B8_LANE_MUX_SEL_DP; + /* + * USB on lanes 0 & 1 in normal mode, or 2 & 3 if reversed, DP on the + * other ones. + */ + reg |= FIELD_PREP(CMN_REG00B8_LANE_MUX_SEL_DP, + ((phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) + ? (CMN_REG00B8_LANE_MUX_SEL_DP_LANE3 + | CMN_REG00B8_LANE_MUX_SEL_DP_LANE2) + : (CMN_REG00B8_LANE_MUX_SEL_DP_LANE1 + | CMN_REG00B8_LANE_MUX_SEL_DP_LANE0))); + writel(reg, regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); + + /* override of TX receiver detector and comparator: lane 1 */ + reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413); + if (phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) { + reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN; + reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_EN; + } else { + reg |= TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN; + reg |= TRSV_REG0413_OVRD_LN1_TX_RXD_EN; + } + writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413); + + /* lane 3 */ + reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813); + if (phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) { + reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN; + reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_EN; + } else { + reg &= ~TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN; + reg &= ~TRSV_REG0813_OVRD_LN3_TX_RXD_EN; + } + writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813); +} + +static int +exynos5_usbdrd_usbdp_g2_v4_pma_check_pll_lock(struct exynos5_usbdrd_phy *phy_drd) +{ + static const unsigned int timeout_us = 40000; + static const unsigned int sleep_us = 40; + static const u32 locked = (CMN_REG01C0_ANA_LCPLL_LOCK_DONE | + CMN_REG01C0_ANA_LCPLL_AFC_DONE); + u32 reg; + int err; + + err = readl_poll_timeout( + phy_drd->reg_pma + EXYNOS9_PMA_USBDP_CMN_REG01C0, + reg, (reg & locked) == locked, sleep_us, timeout_us); + if (err) + dev_err(phy_drd->dev, + "timed out waiting for PLL lock: %#.8x\n", reg); + + return err; +} + +static void +exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(struct exynos5_usbdrd_phy *phy_drd) +{ + static const unsigned int timeout_us = 40000; + static const unsigned int sleep_us = 40; + static const u32 locked = + (TRSV_REG03C3_LN0_MON_RX_CDR_AFC_DONE + | TRSV_REG03C3_LN0_MON_RX_CDR_CAL_DONE + | TRSV_REG03C3_LN0_MON_RX_CDR_FLD_PLL_MODE_DONE + | TRSV_REG03C3_LN0_MON_RX_CDR_LOCK_DONE); + u32 reg; + int err; + + err = readl_poll_timeout( + /* lane depends on cable orientation */ + (phy_drd->reg_pma + + ((phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) + ? EXYNOS9_PMA_USBDP_TRSV_REG03C3 + : EXYNOS9_PMA_USBDP_TRSV_REG07C3)), + reg, (reg & locked) == locked, sleep_us, timeout_us); + if (err) + dev_err(phy_drd->dev, + "timed out waiting for CDR(l%d) lock: %#.8x\n", + ((phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) + ? 0 + : 2), reg); +} + +static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Set Loss-of-Signal Detector sensitivity */ + reg &= ~PHYPARAM0_REF_LOSLEVEL; + reg |= FIELD_PREP(PHYPARAM0_REF_LOSLEVEL, PHYPARAM0_REF_LOSLEVEL_VAL); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH; + reg |= FIELD_PREP(PHYPARAM1_PCS_TXDEEMPH, PHYPARAM1_PCS_TXDEEMPH_VAL); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static int exynos5_usbdrd_phy_init(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* Reset USB 3.0 PHY */ + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg = LINKSYSTEM_XHCI_VERSION_CONTROL | + FIELD_PREP(LINKSYSTEM_FLADJ, 0x20); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Select PHY CLK source */ + reg &= ~PHYPARAM0_REF_USE_PAD; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + /* This bit must be set for both HS and SS operations */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + reg |= PHYUTMICLKSEL_UTMI_CLKSEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + /* reference clock settings */ + reg = inst->phy_cfg->set_refclk(inst); + + /* Digital power supply in normal operating mode */ + reg |= PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN | + /* Reset the port */ + PHYCLKRST_PORTRESET; + + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + fsleep(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos5_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + reg = PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Resetting the PHYCLKRST enable bits to reduce leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + reg &= ~(PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Control PHYTEST to remove leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg |= PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos5_usbdrd_phy_power_on(struct phy *phy) +{ + int ret; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + if (ret) + return ret; + + /* Enable VBUS supply */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable PHY regulator(s)\n"); + goto fail_vbus; + } + + /* Power-on PHY */ + inst->phy_cfg->phy_isol(inst, false); + + return 0; + +fail_vbus: + clk_bulk_disable_unprepare(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + + return ret; +} + +static int exynos5_usbdrd_phy_power_off(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); + + /* Power-off the PHY */ + inst->phy_cfg->phy_isol(inst, true); + + /* Disable VBUS supply */ + regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + + return 0; +} + +static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd, + u32 val, u32 cmd) +{ + unsigned int result; + int err; + + writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, (result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout1 (0x%08x)\n", val); + return err; + } + + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, !(result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout2 (0x%08x)\n", val); + return err; + } + + return 0; +} + +static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd, + u32 addr, u32 data) +{ + u32 val; + int ret; + + /* Write Address */ + val = FIELD_PREP(PHYREG0_CR_DATA_IN, addr); + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_CAP_ADDR); + if (ret) + return ret; + + /* Write Data */ + val = FIELD_PREP(PHYREG0_CR_DATA_IN, data); + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_CAP_DATA); + if (ret) + return ret; + + ret = crport_handshake(phy_drd, val, PHYREG0_CR_WRITE); + + return ret; +} + +/* + * Calibrate few PHY parameters using CR_PORT register to meet + * SuperSpeed requirements on Exynos5420 and Exynos5800 systems, + * which have 28nm USB 3.0 DRD PHY. + */ +static int exynos5420_usbdrd_phy_calibrate(struct exynos5_usbdrd_phy *phy_drd) +{ + unsigned int temp; + int ret = 0; + + /* + * Change los_bias to (0x5) for 28nm PHY from a + * default value (0x0); los_level is set as default + * (0x9) as also reflected in los_level[30:26] bits + * of PHYPARAM0 register. + */ + temp = LOSLEVEL_OVRD_IN_LOS_BIAS_5420 | + LOSLEVEL_OVRD_IN_EN | + LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT; + ret = crport_ctrl_write(phy_drd, + EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN, + temp); + if (ret) { + dev_err(phy_drd->dev, + "Failed setting Loss-of-Signal level for SuperSpeed\n"); + return ret; + } + + /* + * Set tx_vboost_lvl to (0x5) for 28nm PHY Tuning, + * to raise Tx signal level from its default value of (0x4) + */ + temp = TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420; + ret = crport_ctrl_write(phy_drd, + EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN, + temp); + if (ret) { + dev_err(phy_drd->dev, + "Failed setting Tx-Vboost-Level for SuperSpeed\n"); + return ret; + } + + /* + * Set proper time to wait for RxDetect measurement, for + * desired reference clock of PHY, by tuning the CR_PORT + * register LANE0.TX_DEBUG which is internal to PHY. + * This fixes issue with few USB 3.0 devices, which are + * not detected (not even generate interrupts on the bus + * on insertion) without this change. + * e.g. Samsung SUM-TSB16S 3.0 USB drive. + */ + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M; + break; + case EXYNOS5_FSEL_20MHZ: + case EXYNOS5_FSEL_19MHZ2: + temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M; + break; + case EXYNOS5_FSEL_24MHZ: + default: + temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M; + break; + } + + ret = crport_ctrl_write(phy_drd, + EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG, + temp); + if (ret) + dev_err(phy_drd->dev, + "Fail to set RxDet measurement time for SuperSpeed\n"); + + return ret; +} + +static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= EXYNOS5_DRDPHYS_NUM)) + return ERR_PTR(-ENODEV); + + return phy_drd->phys[args->args[0]].phy; +} + +static int exynos5_usbdrd_phy_calibrate(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + return exynos5420_usbdrd_phy_calibrate(phy_drd); + return 0; +} + +static const struct phy_ops exynos5_usbdrd_phy_ops = { + .init = exynos5_usbdrd_phy_init, + .exit = exynos5_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .calibrate = exynos5_usbdrd_phy_calibrate, + .owner = THIS_MODULE, +}; + +static void exynos7870_usbdrd_phy_isol(struct phy_usb_instance *inst, + bool isolate) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = isolate ? 0 : EXYNOS7870_USB2PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS7870_USB2PHY_ENABLE, val); +} + +static void exynos7870_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + /* Use PADREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_PAD_REFCLK); + /* Select ref clock rate */ + reg &= ~PHYCLKRST_FSEL_UTMI; + reg &= ~PHYCLKRST_FSEL_PIPE; + reg |= FIELD_PREP(PHYCLKRST_FSEL_UTMI, phy_drd->extrefclk); + /* Enable suspend and reset the port */ + reg |= PHYCLKRST_EN_UTMISUSPEND; + reg |= PHYCLKRST_COMMONONN; + reg |= PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + udelay(10); + + /* Clear the port reset bit */ + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Change PHY PLL tune value */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYPLLTUNE); + if (phy_drd->extrefclk == EXYNOS5_FSEL_24MHZ) + reg |= HSPHYPLLTUNE_PLL_B_TUNE; + else + reg &= ~HSPHYPLLTUNE_PLL_B_TUNE; + reg &= ~HSPHYPLLTUNE_PLL_P_TUNE; + reg |= FIELD_PREP(HSPHYPLLTUNE_PLL_P_TUNE, 14); + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYPLLTUNE); + + /* High-Speed PHY control */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg &= ~HSPHYCTRL_SIDDQ; + reg &= ~HSPHYCTRL_PHYSWRST; + reg &= ~HSPHYCTRL_PHYSWRSTALL; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + udelay(500); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg |= LINKSYSTEM_XHCI_VERSION_CONTROL; + reg &= ~LINKSYSTEM_FLADJ; + reg |= FIELD_PREP(LINKSYSTEM_FLADJ, 0x20); + /* Set VBUSVALID signal as the VBUS pad is not used */ + reg |= LINKSYSTEM_FORCE_BVALID; + reg |= LINKSYSTEM_FORCE_VBUSVALID; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + /* Release force_sleep & force_suspend */ + reg &= ~PHYUTMI_FORCESLEEP; + reg &= ~PHYUTMI_FORCESUSPEND; + /* DP/DM pull down control */ + reg &= ~PHYUTMI_DMPULLDOWN; + reg &= ~PHYUTMI_DPPULLDOWN; + reg &= ~PHYUTMI_DRVVBUS; + /* Set DP-pull up as the VBUS pad is not used */ + reg |= PHYUTMI_VBUSVLDEXTSEL; + reg |= PHYUTMI_VBUSVLDEXT; + /* Disable OTG block and VBUS valid comparator */ + reg |= PHYUTMI_OTGDISABLE; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Configure OVC IO usage */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKPORT); + reg |= LINKPORT_HOST_PORT_OVCR_U3_SEL | LINKPORT_HOST_PORT_OVCR_U2_SEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKPORT); + + /* High-Speed PHY swrst */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg |= HSPHYCTRL_PHYSWRST; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + udelay(20); + + /* Clear the PHY swrst bit */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg &= ~HSPHYCTRL_PHYSWRST; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + + if (phy_drd->drv_data->phy_tunes) + exynos5_usbdrd_apply_phy_tunes(phy_drd, + PTS_UTMI_POSTINIT); +} + +static int exynos7870_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos7870_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* + * Disable the VBUS signal and the ID pull-up resistor. + * Enable force-suspend and force-sleep modes. + */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + reg &= ~(PHYUTMI_DRVVBUS | PHYUTMI_VBUSVLDEXT | PHYUTMI_VBUSVLDEXTSEL); + reg &= ~PHYUTMI_IDPULLUP; + reg |= PHYUTMI_FORCESUSPEND | PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Power down PHY analog blocks */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg |= HSPHYCTRL_SIDDQ; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + + /* Clear VBUSVALID signal as the VBUS pad is not used */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + reg &= ~(LINKSYSTEM_FORCE_BVALID | LINKSYSTEM_FORCE_VBUSVALID); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static const struct phy_ops exynos7870_usbdrd_phy_ops = { + .init = exynos7870_usbdrd_phy_init, + .exit = exynos7870_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static void exynos2200_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + /* Configure non-Samsung IP PHY, responsible for UTMI */ + phy_init(phy_drd->hs_phy); +} + +static void exynos2200_usbdrd_link_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* De-assert link reset */ + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + /* Set link VBUS Valid */ + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg |= EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); +} + +static void +exynos2200_usbdrd_link_attach_detach_pipe3_phy(struct phy_usb_instance *inst) +{ + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* force pipe3 signal for link */ + reg &= ~LINKCTRL_FORCE_PHYSTATUS; + reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE; + } else { + /* disable forcing pipe interface */ + reg &= ~LINKCTRL_FORCE_PIPE_EN; + } + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS2200_DRD_HSP_MISC); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* calibrate only eUSB phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1); + reg |= HSP_MISC_SET_REQ_IN2; + } else { + /* calibrate for dual phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1_PHY2); + reg &= ~HSP_MISC_SET_REQ_IN2; + } + writel(reg, regs_base + EXYNOS2200_DRD_HSP_MISC); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + reg &= ~EXYNOS2200_CLKRST_LINK_PCLK_SEL; + else + reg |= EXYNOS2200_CLKRST_LINK_PCLK_SEL; + + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); +} + +static int exynos2200_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* Power-on PHY ... */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable PHY regulator(s)\n"); + return ret; + } + } + /* + * ... and ungate power via PMU. Without this here, we get an SError + * trying to access PMA registers + */ + exynos5_usbdrd_phy_isol(inst, false); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* Set up the link controller */ + exynos2200_usbdrd_link_init(phy_drd); + + /* UTMI or PIPE3 link preparation */ + exynos2200_usbdrd_link_attach_detach_pipe3_phy(inst); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos2200_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg &= ~(EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID); + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + exynos5_usbdrd_phy_isol(inst, true); + return regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); +} + +static const struct phy_ops exynos2200_usbdrd_phy_ops = { + .init = exynos2200_usbdrd_phy_init, + .exit = exynos2200_usbdrd_phy_exit, + .owner = THIS_MODULE, +}; + +static void +exynos5_usbdrd_usb_v3p1_pipe_override(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* force pipe3 signal for link */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg &= ~LINKCTRL_FORCE_PHYSTATUS; + reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* PMA disable */ + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg |= SECPMACTL_PMA_LOW_PWR; + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); +} + +static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + u32 ss_ports; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS850_DRD_LINKPORT); + ss_ports = FIELD_GET(LINKPORT_HOST_NUM_U3, reg); + + /* Start PHY Reset (POR=high) */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + if (ss_ports) { + reg |= CLKRST_PHY20_SW_POR; + reg |= CLKRST_PHY20_SW_POR_SEL; + reg |= CLKRST_PHY_RESET_SEL; + } + reg |= CLKRST_PHY_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + /* Enable UTMI+ */ + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP | UTMI_DP_PULLDOWN | + UTMI_DM_PULLDOWN); + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + /* Set PHY clock and control HS PHY */ + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_EN_UTMISUSPEND | HSP_COMMONONN; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + + /* Set VBUS Valid and D+ pull-up control by VBUS pad usage */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= FIELD_PREP(LINKCTRL_BUS_FILTER_BYPASS, 0xf); + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + if (!phy_drd->sw) { + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg |= UTMI_FORCE_BVALID | UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + } + + reg = readl(regs_base + EXYNOS850_DRD_SSPPLLCTL); + reg &= ~SSPPLLCTL_FSEL; + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 7); + break; + case EXYNOS5_FSEL_26MHZ: + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 6); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 2); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 1); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 0); + break; + default: + dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n", + phy_drd->extrefclk); + break; + } + writel(reg, regs_base + EXYNOS850_DRD_SSPPLLCTL); + + if (phy_drd->drv_data->phy_tunes) + exynos5_usbdrd_apply_phy_tunes(phy_drd, + PTS_UTMI_POSTINIT); + + /* Power up PHY analog blocks */ + reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); + reg &= ~HSP_TEST_SIDDQ; + writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); + + /* Finish PHY reset (POR=low) */ + fsleep(10); /* required before doing POR=low */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + if (ss_ports) { + reg |= CLKRST_PHY20_SW_POR_SEL; + reg &= ~CLKRST_PHY20_SW_POR; + } + reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST); + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + fsleep(75); /* required after POR=low for guaranteed PHY clock */ + + /* Disable single ended signal out */ + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg &= ~HSP_FSV_OUT_EN; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + + if (ss_ports) + exynos5_usbdrd_usb_v3p1_pipe_override(phy_drd); +} + +static int exynos850_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* UTMI or PIPE3 specific init */ + scoped_guard(mutex, &phy_drd->phy_mutex) + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos850_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + guard(mutex)(&phy_drd->phy_mutex); + + /* Set PHY clock and control HS PHY */ + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_DP_PULLDOWN | UTMI_DM_PULLDOWN); + reg |= UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + /* Power down PHY analog blocks */ + reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); + reg |= HSP_TEST_SIDDQ; + writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); + + /* Link reset */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + fsleep(10); /* required before doing POR=low */ + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static const struct phy_ops exynos850_usbdrd_phy_ops = { + .init = exynos850_usbdrd_phy_init, + .exit = exynos850_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static void exynos5_usbdrd_gs101_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_pma = phy_drd->reg_pma; + void __iomem *regs_phy = phy_drd->reg_phy; + u32 reg; + + exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(phy_drd); + + /* force aux off */ + reg = readl(regs_pma + EXYNOS9_PMA_USBDP_CMN_REG0008); + reg &= ~CMN_REG0008_AUX_EN; + reg |= CMN_REG0008_OVRD_AUX_EN; + writel(reg, regs_pma + EXYNOS9_PMA_USBDP_CMN_REG0008); + + exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_PREINIT); + exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_INIT); + exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_POSTINIT); + + exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(phy_drd); + + /* reset release from port */ + reg = readl(regs_phy + EXYNOS850_DRD_SECPMACTL); + reg &= ~(SECPMACTL_PMA_TRSV_SW_RST | SECPMACTL_PMA_CMN_SW_RST | + SECPMACTL_PMA_INIT_SW_RST); + writel(reg, regs_phy + EXYNOS850_DRD_SECPMACTL); + + if (!exynos5_usbdrd_usbdp_g2_v4_pma_check_pll_lock(phy_drd)) + exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(phy_drd); +} + +static int exynos5_usbdrd_gs101_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* Power-on PHY ... */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable PHY regulator(s)\n"); + return ret; + } + } + /* + * ... and ungate power via PMU. Without this here, we get an SError + * trying to access PMA registers + */ + exynos5_usbdrd_phy_isol(inst, false); + + return exynos850_usbdrd_phy_init(phy); +} + +static int exynos5_usbdrd_gs101_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + ret = exynos850_usbdrd_phy_exit(phy); + if (ret) + return ret; + } + + exynos5_usbdrd_phy_isol(inst, true); + + if (inst->phy_cfg->id != EXYNOS5_DRDPHY_UTMI) + return 0; + + return regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); +} + +static const struct phy_ops gs101_usbdrd_phy_ops = { + .init = exynos5_usbdrd_gs101_phy_init, + .exit = exynos5_usbdrd_gs101_phy_exit, + .owner = THIS_MODULE, +}; + +static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) +{ + int ret; + struct clk *ref_clk; + unsigned long ref_rate; + + phy_drd->clks = devm_kcalloc(phy_drd->dev, phy_drd->drv_data->n_clks, + sizeof(*phy_drd->clks), GFP_KERNEL); + if (!phy_drd->clks) + return -ENOMEM; + + for (int i = 0; i < phy_drd->drv_data->n_clks; ++i) + phy_drd->clks[i].id = phy_drd->drv_data->clk_names[i]; + + ret = devm_clk_bulk_get(phy_drd->dev, phy_drd->drv_data->n_clks, + phy_drd->clks); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "failed to get phy clock(s)\n"); + + phy_drd->core_clks = devm_kcalloc(phy_drd->dev, + phy_drd->drv_data->n_core_clks, + sizeof(*phy_drd->core_clks), + GFP_KERNEL); + if (!phy_drd->core_clks) + return -ENOMEM; + + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) + phy_drd->core_clks[i].id = phy_drd->drv_data->core_clk_names[i]; + + ret = devm_clk_bulk_get(phy_drd->dev, phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "failed to get phy core clock(s)\n"); + + if (phy_drd->drv_data->n_core_clks) { + ref_clk = NULL; + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { + if (!strcmp(phy_drd->core_clks[i].id, "ref")) { + ref_clk = phy_drd->core_clks[i].clk; + break; + } + } + if (!ref_clk) + return dev_err_probe(phy_drd->dev, -ENODEV, + "failed to find phy reference clock\n"); + + ref_rate = clk_get_rate(ref_clk); + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "clock rate (%ld) not supported\n", + ref_rate); + } + + return 0; +} + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos2200[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos2200_usbdrd_utmi_init, + }, +}; + +static int exynos5_usbdrd_orien_sw_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct exynos5_usbdrd_phy *phy_drd = typec_switch_get_drvdata(sw); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable PHY clocks(s)\n"); + return ret; + } + + scoped_guard(mutex, &phy_drd->phy_mutex) { + void __iomem * const regs_base = phy_drd->reg_phy; + unsigned int reg; + + if (orientation == TYPEC_ORIENTATION_NONE) { + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_FORCE_VBUSVALID | UTMI_FORCE_BVALID); + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXTSEL; + reg &= ~HSP_VBUSVLDEXT; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + } else { + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg |= UTMI_FORCE_VBUSVALID | UTMI_FORCE_BVALID; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXTSEL | HSP_VBUSVLDEXT; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + } + + phy_drd->orientation = orientation; + } + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static void exynos5_usbdrd_orien_switch_unregister(void *data) +{ + struct exynos5_usbdrd_phy *phy_drd = data; + + typec_switch_unregister(phy_drd->sw); +} + +static int exynos5_usbdrd_setup_notifiers(struct exynos5_usbdrd_phy *phy_drd) +{ + int ret; + + if (!IS_ENABLED(CONFIG_TYPEC)) + return 0; + + if (device_property_present(phy_drd->dev, "orientation-switch")) { + struct typec_switch_desc sw_desc = { }; + + sw_desc.drvdata = phy_drd; + sw_desc.fwnode = dev_fwnode(phy_drd->dev); + sw_desc.set = exynos5_usbdrd_orien_sw_set; + + phy_drd->sw = typec_switch_register(phy_drd->dev, &sw_desc); + if (IS_ERR(phy_drd->sw)) + return dev_err_probe(phy_drd->dev, + PTR_ERR(phy_drd->sw), + "Failed to register TypeC orientation switch\n"); + + ret = devm_add_action_or_reset(phy_drd->dev, + exynos5_usbdrd_orien_switch_unregister, + phy_drd); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "Failed to register TypeC orientation devm action\n"); + } + + return 0; +} + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_utmi_init, + .set_refclk = exynos5_usbdrd_utmi_set_refclk, + }, + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_pipe3_init, + .set_refclk = exynos5_usbdrd_pipe3_set_refclk, + }, +}; + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos7870[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos7870_usbdrd_phy_isol, + .phy_init = exynos7870_usbdrd_utmi_init, + }, +}; + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos850_usbdrd_utmi_init, + }, +}; + +static +const struct exynos5_usbdrd_phy_tuning exynos7870_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS5_DRD_PHYPARAM0, + (PHYPARAM0_TXVREFTUNE | PHYPARAM0_TXRISETUNE | + PHYPARAM0_TXRESTUNE | PHYPARAM0_TXPREEMPPULSETUNE | + PHYPARAM0_TXPREEMPAMPTUNE | PHYPARAM0_TXHSXVTUNE | + PHYPARAM0_TXFSLSTUNE | PHYPARAM0_SQRXTUNE | + PHYPARAM0_OTGTUNE | PHYPARAM0_COMPDISTUNE), + (FIELD_PREP_CONST(PHYPARAM0_TXVREFTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_TXRISETUNE, 1) | + FIELD_PREP_CONST(PHYPARAM0_TXRESTUNE, 2) | + FIELD_PREP_CONST(PHYPARAM0_TXPREEMPPULSETUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXPREEMPAMPTUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXHSXVTUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXFSLSTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_SQRXTUNE, 5) | + FIELD_PREP_CONST(PHYPARAM0_OTGTUNE, 2) | + FIELD_PREP_CONST(PHYPARAM0_COMPDISTUNE, 3))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *exynos7870_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = exynos7870_tunes_utmi_postinit, +}; + +static const char * const exynos5_clk_names[] = { + "phy", +}; + +static const char * const exynos5_core_clk_names[] = { + "ref", +}; + +static const char * const exynos5433_core_clk_names[] = { + "ref", "phy_pipe", "phy_utmi", "itp", +}; + +static const char * const exynos5_regulator_names[] = { + "vbus", "vbus-boost", +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos2200_usb32drd_phy = { + .phy_cfg = phy_cfg_exynos2200, + .phy_ops = &exynos2200_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS2200_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + /* clocks and regulators are specific to the underlying PHY blocks */ + .core_clk_names = NULL, + .n_core_clks = 0, + .regulator_names = NULL, + .n_regulators = 0, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5433_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5433_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .phy_ops = &exynos5_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5433_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5433_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos7870_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos7870, + .phy_tunes = exynos7870_tunes, + .phy_ops = &exynos7870_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos850, + .phy_ops = &exynos850_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_tuning exynos990_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS850_DRD_HSPPARACON, + (HSPPARACON_TXVREF | + HSPPARACON_TXPREEMPAMP | HSPPARACON_SQRX | + HSPPARACON_COMPDIS), + (FIELD_PREP_CONST(HSPPARACON_TXVREF, 7) | + FIELD_PREP_CONST(HSPPARACON_TXPREEMPAMP, 3) | + FIELD_PREP_CONST(HSPPARACON_SQRX, 5) | + FIELD_PREP_CONST(HSPPARACON_COMPDIS, 7))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *exynos990_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = exynos990_tunes_utmi_postinit, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos990_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos850, + .phy_ops = &exynos850_usbdrd_phy_ops, + .phy_tunes = exynos990_tunes, + .pmu_offset_usbdrd0_phy = EXYNOS990_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static void +exynosautov920_usb31drd_cr_clk(struct exynos5_usbdrd_phy *phy_drd, bool high) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 reg; + + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + if (high) + reg |= PHY_CR_PARA_CON0_PHY0_CR_PARA_CLK; + else + reg &= ~PHY_CR_PARA_CON0_PHY0_CR_PARA_CLK; + + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + fsleep(1); +} + +static void +exynosautov920_usb31drd_port_phy_ready(struct exynos5_usbdrd_phy *phy_drd) +{ + struct device *dev = phy_drd->dev; + void __iomem *reg_phy = phy_drd->reg_phy; + static const unsigned int timeout_us = 20000; + static const unsigned int sleep_us = 40; + u32 reg; + int err; + + /* Clear cr_para_con */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + reg &= ~(PHY_CR_PARA_CON0_PHY0_CR_PARA_CLK | + PHY_CR_PARA_CON0_PHY0_CR_PARA_ADDR); + reg |= PHY_CR_PARA_CON0_PHY0_CR_PARA_SEL; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + writel(0x0, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON1); + writel(0x0, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON2); + + exynosautov920_usb31drd_cr_clk(phy_drd, true); + exynosautov920_usb31drd_cr_clk(phy_drd, false); + + /* + * The maximum time from phy reset de-assertion to de-assertion of + * tx/rx_ack can be as high as 5ms in fast simulation mode. + * Time to phy ready is < 20ms + */ + err = readl_poll_timeout(reg_phy + + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0, + reg, !(reg & PHY_CR_PARA_CON0_PHY0_CR_PARA_ACK), + sleep_us, timeout_us); + if (err) + dev_err(dev, "timed out waiting for rx/tx_ack: %#.8x\n", reg); + + reg &= ~PHY_CR_PARA_CON0_PHY0_CR_PARA_CLK; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); +} + +static void +exynosautov920_usb31drd_cr_write(struct exynos5_usbdrd_phy *phy_drd, + u16 addr, u16 data) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 cnt = 0; + u32 reg; + + /* Pre Clocking */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + reg |= PHY_CR_PARA_CON0_PHY0_CR_PARA_SEL; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + + /* + * tx clks must be available prior to assertion of tx req. + * tx pstate p2 to p0 transition directly is not permitted. + * tx clk ready must be asserted synchronously on tx clk prior + * to internal transmit clk alignment sequence in the phy + * when entering from p2 to p1 to p0. + */ + do { + exynosautov920_usb31drd_cr_clk(phy_drd, true); + exynosautov920_usb31drd_cr_clk(phy_drd, false); + cnt++; + } while (cnt < 15); + + reg &= ~PHY_CR_PARA_CON0_PHY0_CR_PARA_SEL; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + + /* + * tx data path is active when tx lane is in p0 state + * and tx data en asserted. enable cr_para_wr_en. + */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON2); + reg &= ~PHY_CR_PARA_CON2_PHY0_CR_PARA_WR_DATA; + reg |= FIELD_PREP(PHY_CR_PARA_CON2_PHY0_CR_PARA_WR_DATA, data) | + PHY_CR_PARA_CON2_PHY0_CR_PARA_WR_EN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON2); + + /* write addr */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + reg &= ~PHY_CR_PARA_CON0_PHY0_CR_PARA_ADDR; + reg |= FIELD_PREP(PHY_CR_PARA_CON0_PHY0_CR_PARA_ADDR, addr) | + PHY_CR_PARA_CON0_PHY0_CR_PARA_CLK | + PHY_CR_PARA_CON0_PHY0_CR_PARA_SEL; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + + /* check cr_para_ack*/ + cnt = 0; + do { + /* + * data symbols are captured by phy on rising edge of the + * tx_clk when tx data enabled. + * completion of the write cycle is acknowledged by assertion + * of the cr_para_ack. + */ + exynosautov920_usb31drd_cr_clk(phy_drd, true); + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CR_PARA_CON0); + if ((reg & PHY_CR_PARA_CON0_PHY0_CR_PARA_ACK)) + break; + + exynosautov920_usb31drd_cr_clk(phy_drd, false); + + /* + * wait for minimum of 10 cr_para_clk cycles after phy reset + * is negated, before accessing control regs to allow for + * internal resets. + */ + cnt++; + } while (cnt < 10); + + if (cnt < 10) + exynosautov920_usb31drd_cr_clk(phy_drd, false); +} + +static void +exynosautov920_usb31drd_phy_reset(struct exynos5_usbdrd_phy *phy_drd, int val) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 reg; + + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); + reg &= ~PHY_RST_CTRL_PHY_RESET_OVRD_EN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); + + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); + if (val) + reg |= PHY_RST_CTRL_PHY_RESET; + else + reg &= ~PHY_RST_CTRL_PHY_RESET; + + reg |= PHY_RST_CTRL_PHY_RESET_OVRD_EN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); +} + +static void +exynosautov920_usb31drd_lane0_reset(struct exynos5_usbdrd_phy *phy_drd, int val) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 reg; + + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); + reg |= PHY_RST_CTRL_PIPE_LANE0_RESET_N_OVRD_EN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); + + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); + if (val) + reg &= ~PHY_RST_CTRL_PIPE_LANE0_RESET_N; + else + reg |= PHY_RST_CTRL_PIPE_LANE0_RESET_N; + + reg &= ~PHY_RST_CTRL_PIPE_LANE0_RESET_N_OVRD_EN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_RST_CTRL); +} + +static void +exynosautov920_usb31drd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 reg; + + /* + * Phy and Pipe Lane reset assert. + * assert reset (phy_reset = 1). + * The lane-ack outputs are asserted during reset (tx_ack = rx_ack = 1) + */ + exynosautov920_usb31drd_phy_reset(phy_drd, 1); + exynosautov920_usb31drd_lane0_reset(phy_drd, 1); + + /* + * ANA Power En, PCS & PMA PWR Stable Set + * ramp-up power suppiles + */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG0); + reg |= PHY_CONFIG0_PHY0_ANA_PWR_EN | PHY_CONFIG0_PHY0_PCS_PWR_STABLE | + PHY_CONFIG0_PHY0_PMA_PWR_STABLE; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG0); + + fsleep(10); + + /* + * phy is not functional in test_powerdown mode, test_powerdown to be + * de-asserted for normal operation + */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG7); + reg &= ~PHY_CONFIG7_PHY_TEST_POWERDOWN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG7); + + /* + * phy reset signal be asserted for minimum 10us after power + * supplies are ramped-up + */ + fsleep(10); + + /* + * Phy and Pipe Lane reset assert de-assert + */ + exynosautov920_usb31drd_phy_reset(phy_drd, 0); + exynosautov920_usb31drd_lane0_reset(phy_drd, 0); + + /* Pipe_rx0_sris_mode_en = 1 */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG4); + reg |= PHY_CONFIG4_PIPE_RX0_SRIS_MODE_EN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG4); + + /* + * wait for lane ack outputs to de-assert (tx_ack = rx_ack = 0) + * Exit from the reset state is indicated by de-assertion of *_ack + */ + exynosautov920_usb31drd_port_phy_ready(phy_drd); + + /* override values for level settings */ + exynosautov920_usb31drd_cr_write(phy_drd, 0x22, 0x00F5); +} + +static void +exynosautov920_usb31drd_ssphy_disable(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 reg; + + /* 1. Assert reset (phy_reset = 1) */ + exynosautov920_usb31drd_lane0_reset(phy_drd, 1); + exynosautov920_usb31drd_phy_reset(phy_drd, 1); + + /* phy test power down */ + reg = readl(reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG7); + reg |= PHY_CONFIG7_PHY_TEST_POWERDOWN; + writel(reg, reg_phy + EXYNOSAUTOV920_USB31DRD_PHY_CONFIG7); +} + +static void +exynosautov920_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *reg_phy = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This + * forces QACTIVE signal in Q-Channel interface to HIGH level, + * to make sure the PHY clock is not gated by the hardware. + */ + reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + /* De-assert link reset */ + reg = readl(reg_phy + EXYNOS2200_DRD_CLKRST); + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); + + /* Set PHY POR High */ + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + reg |= HSPCLKRST_PHY20_SW_POR | HSPCLKRST_PHY20_SW_POR_SEL; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + + /* Enable UTMI+ */ + reg = readl(reg_phy + EXYNOS2200_DRD_UTMI); + reg &= ~(UTMICTL_FORCE_UTMI_SUSPEND | UTMICTL_FORCE_UTMI_SLEEP | + UTMICTL_FORCE_DPPULLDOWN | UTMICTL_FORCE_DMPULLDOWN); + writel(reg, reg_phy + EXYNOS2200_DRD_UTMI); + + /* set phy clock & control HS phy */ + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + reg |= HSPCTRL_EN_UTMISUSPEND | HSPCTRL_COMMONONN; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + + fsleep(100); + + /* Set VBUS Valid and DP-Pull up control by VBUS pad usage */ + reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg |= FIELD_PREP_CONST(LINKCTRL_BUS_FILTER_BYPASS, 0xf); + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + reg = readl(reg_phy + EXYNOS2200_DRD_UTMI); + reg |= EXYNOS2200_UTMI_FORCE_VBUSVALID | EXYNOS2200_UTMI_FORCE_BVALID; + writel(reg, reg_phy + EXYNOS2200_DRD_UTMI); + + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + reg |= HSPCTRL_VBUSVLDEXTSEL | HSPCTRL_VBUSVLDEXT; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPCTL); + + /* Setting FSEL for refference clock */ + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSPPLLTUNE); + reg &= ~HSPPLLTUNE_FSEL; + + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 7); + break; + case EXYNOS5_FSEL_26MHZ: + reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 6); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 2); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 1); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 0); + break; + default: + dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n", + phy_drd->extrefclk); + break; + } + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPPLLTUNE); + + /* Enable PHY Power Mode */ + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + reg &= ~HSP_TEST_SIDDQ; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + + /* before POR low, 10us delay is needed to Finish PHY reset */ + fsleep(10); + + /* Set PHY POR Low */ + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + reg |= HSPCLKRST_PHY20_SW_POR_SEL; + reg &= ~(HSPCLKRST_PHY20_SW_POR | HSPCLKRST_PHY20_SW_PORTRESET); + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST); + + /* after POR low and delay 75us, PHYCLOCK is guaranteed. */ + fsleep(75); + + /* Disable forcing pipe interface */ + reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg &= ~LINKCTRL_FORCE_PIPE_EN; + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + /* Pclk to pipe_clk */ + reg = readl(reg_phy + EXYNOS2200_DRD_CLKRST); + reg |= EXYNOS2200_CLKRST_LINK_PCLK_SEL; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); +} + +static void +exynosautov920_usbdrd_hsphy_disable(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + void __iomem *reg_phy = phy_drd->reg_phy; + + /* set phy clock & control HS phy */ + reg = readl(reg_phy + EXYNOS2200_DRD_UTMI); + reg |= UTMICTL_FORCE_UTMI_SUSPEND | UTMICTL_FORCE_UTMI_SLEEP; + reg &= ~(UTMICTL_FORCE_DPPULLDOWN | UTMICTL_FORCE_DMPULLDOWN); + writel(reg, reg_phy + EXYNOS2200_DRD_UTMI); + + /* Disable PHY Power Mode */ + reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + reg |= HSP_TEST_SIDDQ; + writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST); + + /* clear force q-channel */ + reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL); + reg &= ~LINKCTRL_FORCE_QACT; + writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL); + + /* link sw reset is need for USB_DP/DM high-z in host mode */ + reg = readl(reg_phy + EXYNOS2200_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); + fsleep(10); + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST); +} + +static int exynosautov920_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* Bypass PHY isol */ + inst->phy_cfg->phy_isol(inst, false); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynosautov920_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + exynos850_usbdrd_phy_exit(phy); + + /* enable PHY isol */ + inst->phy_cfg->phy_isol(inst, true); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynosautov920_usbdrd_combo_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret = 0; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + exynosautov920_usbdrd_hsphy_disable(phy_drd); + else if (inst->phy_cfg->id == EXYNOS5_DRDPHY_PIPE3) + exynosautov920_usb31drd_ssphy_disable(phy_drd); + + /* enable PHY isol */ + inst->phy_cfg->phy_isol(inst, true); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynosautov920_usbdrd_phy_power_on(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + if (ret) + return ret; + + /* Enable supply */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable PHY regulator(s)\n"); + goto fail_supply; + } + + return 0; + +fail_supply: + clk_bulk_disable_unprepare(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + + return ret; +} + +static int exynosautov920_usbdrd_phy_power_off(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); + + /* Disable supply */ + regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + + return 0; +} + +static const char * const exynosautov920_usb30_regulators[] = { + "dvdd", "vdd18", +}; + +static const char * const exynosautov920_usb20_regulators[] = { + "dvdd", "vdd18", "vdd33", +}; + +static const struct +exynos5_usbdrd_phy_config usb31drd_phy_cfg_exynosautov920[] = { + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynosautov920_usb31drd_pipe3_init, + }, +}; + +static const struct phy_ops exynosautov920_usb31drd_combo_ssphy_ops = { + .init = exynosautov920_usbdrd_phy_init, + .exit = exynosautov920_usbdrd_combo_phy_exit, + .power_on = exynosautov920_usbdrd_phy_power_on, + .power_off = exynosautov920_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static const +struct exynos5_usbdrd_phy_drvdata exynosautov920_usb31drd_combo_ssphy = { + .phy_cfg = usb31drd_phy_cfg_exynosautov920, + .phy_ops = &exynosautov920_usb31drd_combo_ssphy_ops, + .pmu_offset_usbdrd0_phy = EXYNOSAUTOV920_PHY_CTRL_USB31, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynosautov920_usb30_regulators, + .n_regulators = ARRAY_SIZE(exynosautov920_usb30_regulators), +}; + +static const struct phy_ops exynosautov920_usbdrd_combo_hsphy_ops = { + .init = exynosautov920_usbdrd_phy_init, + .exit = exynosautov920_usbdrd_combo_phy_exit, + .power_on = exynosautov920_usbdrd_phy_power_on, + .power_off = exynosautov920_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct +exynos5_usbdrd_phy_config usbdrd_hsphy_cfg_exynosautov920[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynosautov920_usbdrd_utmi_init, + }, +}; + +static const +struct exynos5_usbdrd_phy_drvdata exynosautov920_usbdrd_combo_hsphy = { + .phy_cfg = usbdrd_hsphy_cfg_exynosautov920, + .phy_ops = &exynosautov920_usbdrd_combo_hsphy_ops, + .pmu_offset_usbdrd0_phy = EXYNOSAUTOV920_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynosautov920_usb20_regulators, + .n_regulators = ARRAY_SIZE(exynosautov920_usb20_regulators), +}; + +static const struct phy_ops exynosautov920_usbdrd_phy_ops = { + .init = exynosautov920_usbdrd_phy_init, + .exit = exynosautov920_usbdrd_phy_exit, + .power_on = exynosautov920_usbdrd_phy_power_on, + .power_off = exynosautov920_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynosautov920[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos850_usbdrd_utmi_init, + }, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynosautov920_usbdrd_phy = { + .phy_cfg = phy_cfg_exynosautov920, + .phy_ops = &exynosautov920_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOSAUTOV920_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynosautov920_usb20_regulators, + .n_regulators = ARRAY_SIZE(exynosautov920_usb20_regulators), +}; + +static const struct exynos5_usbdrd_phy_config phy_cfg_gs101[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos850_usbdrd_utmi_init, + }, + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_gs101_pipe3_init, + }, +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS850_DRD_HSPPARACON, + (HSPPARACON_TXVREF | HSPPARACON_TXRES | + HSPPARACON_TXPREEMPAMP | HSPPARACON_SQRX | + HSPPARACON_COMPDIS), + (FIELD_PREP_CONST(HSPPARACON_TXVREF, 6) | + FIELD_PREP_CONST(HSPPARACON_TXRES, 1) | + FIELD_PREP_CONST(HSPPARACON_TXPREEMPAMP, 3) | + FIELD_PREP_CONST(HSPPARACON_SQRX, 5) | + FIELD_PREP_CONST(HSPPARACON_COMPDIS, 7))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_preinit[] = { + /* preinit */ + /* CDR data mode exit GEN1 ON / GEN2 OFF */ + PHY_TUNING_ENTRY_PMA(0x0c8c, -1, 0xff), + PHY_TUNING_ENTRY_PMA(0x1c8c, -1, 0xff), + PHY_TUNING_ENTRY_PMA(0x0c9c, -1, 0x7d), + PHY_TUNING_ENTRY_PMA(0x1c9c, -1, 0x7d), + /* improve EDS distribution */ + PHY_TUNING_ENTRY_PMA(0x0e7c, -1, 0x06), + PHY_TUNING_ENTRY_PMA(0x09e0, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x09e4, -1, 0x36), + PHY_TUNING_ENTRY_PMA(0x1e7c, -1, 0x06), + PHY_TUNING_ENTRY_PMA(0x19e0, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x19e4, -1, 0x36), + /* fix bootloader bug */ + PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x02), + PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x0b), + /* improve LVCC */ + PHY_TUNING_ENTRY_PMA(0x08f0, -1, 0x30), + PHY_TUNING_ENTRY_PMA(0x18f0, -1, 0x30), + /* LFPS RX VIH shmoo hole */ + PHY_TUNING_ENTRY_PMA(0x0a08, -1, 0x0c), + PHY_TUNING_ENTRY_PMA(0x1a08, -1, 0x0c), + /* remove unrelated option for v4 phy */ + PHY_TUNING_ENTRY_PMA(0x0a0c, -1, 0x05), + PHY_TUNING_ENTRY_PMA(0x1a0c, -1, 0x05), + /* improve Gen2 LVCC */ + PHY_TUNING_ENTRY_PMA(0x00f8, -1, 0x1c), + PHY_TUNING_ENTRY_PMA(0x00fc, -1, 0x54), + /* Change Vth of RCV_DET because of TD 7.40 Polling Retry Test */ + PHY_TUNING_ENTRY_PMA(0x104c, -1, 0x07), + PHY_TUNING_ENTRY_PMA(0x204c, -1, 0x07), + /* reduce Ux Exit time, assuming 26MHz clock */ + /* Gen1 */ + PHY_TUNING_ENTRY_PMA(0x0ca8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x0cac, -1, 0x04), + PHY_TUNING_ENTRY_PMA(0x1ca8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x1cac, -1, 0x04), + /* Gen2 */ + PHY_TUNING_ENTRY_PMA(0x0cb8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x0cbc, -1, 0x04), + PHY_TUNING_ENTRY_PMA(0x1cb8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x1cbc, -1, 0x04), + /* RX impedance setting */ + PHY_TUNING_ENTRY_PMA(0x0bb0, 0x03, 0x01), + PHY_TUNING_ENTRY_PMA(0x0bb4, 0xf0, 0xa0), + PHY_TUNING_ENTRY_PMA(0x1bb0, 0x03, 0x01), + PHY_TUNING_ENTRY_PMA(0x1bb4, 0xf0, 0xa0), + + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_init[] = { + /* init */ + /* abnormal common pattern mask */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_BACK_END_MODE_VEC, + BACK_END_MODE_VEC_DISABLE_DATA_MASK, 0), + /* de-serializer enabled when U2 */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_2, PCS_OUT_VEC_B4_DYNAMIC, + PCS_OUT_VEC_B4_SEL_OUT), + /* TX Keeper Disable, Squelch on when U3 */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_3, PCS_OUT_VEC_B7_DYNAMIC, + PCS_OUT_VEC_B7_SEL_OUT | PCS_OUT_VEC_B2_SEL_OUT), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS1_N1, -1, + (FIELD_PREP_CONST(NS_VEC_NS_REQ, 5) | + NS_VEC_ENABLE_TIMER | + FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3))), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS2_N0, -1, + (FIELD_PREP_CONST(NS_VEC_NS_REQ, 1) | + NS_VEC_ENABLE_TIMER | + FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3) | + FIELD_PREP_CONST(NS_VEC_COND_MASK, 2) | + FIELD_PREP_CONST(NS_VEC_EXP_COND, 2))), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS3_N0, -1, + (FIELD_PREP_CONST(NS_VEC_NS_REQ, 1) | + NS_VEC_ENABLE_TIMER | + FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3) | + FIELD_PREP_CONST(NS_VEC_COND_MASK, 7) | + FIELD_PREP_CONST(NS_VEC_EXP_COND, 7))), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_TIMEOUT_0, -1, 112), + /* Block Aligner Type B */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_RX_CONTROL, 0, + RX_CONTROL_EN_BLOCK_ALIGNER_TYPE_B), + /* Block align at TS1/TS2 for Gen2 stability (Gen2 only) */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_RX_CONTROL_DEBUG, + RX_CONTROL_DEBUG_NUM_COM_FOUND, + (RX_CONTROL_DEBUG_EN_TS_CHECK | + /* + * increase pcs ts1 adding packet-cnt 1 --> 4 + * lnx_rx_valid_rstn_delay_rise_sp/ssp : + * 19.6us(0x200) -> 15.3us(0x4) + */ + FIELD_PREP_CONST(RX_CONTROL_DEBUG_NUM_COM_FOUND, 4))), + /* Gen1 Tx DRIVER pre-shoot, de-emphasis, level ctrl */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_HS_TX_COEF_MAP_0, + (HS_TX_COEF_MAP_0_SSTX_DEEMP | HS_TX_COEF_MAP_0_SSTX_LEVEL | + HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT), + (FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_DEEMP, 8) | + FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_LEVEL, 0xb) | + FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT, 0))), + /* Gen2 Tx DRIVER level ctrl */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_LOCAL_COEF, + LOCAL_COEF_PMA_CENTER_COEF, + FIELD_PREP_CONST(LOCAL_COEF_PMA_CENTER_COEF, 0xb)), + /* Gen2 U1 exit LFPS duration : 900ns ~ 1.2us */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_TIMEOUT_3, -1, 4096), + /* set skp_remove_th 0x2 -> 0x7 for avoiding retry problem. */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_EBUF_PARAM, + EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE, + FIELD_PREP_CONST(EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE, 0x7)), + + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_postlock[] = { + /* Squelch off when U3 */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_3, PCS_OUT_VEC_B2_SEL_OUT, 0), + + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *gs101_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = gs101_tunes_utmi_postinit, + [PTS_PIPE3_PREINIT] = gs101_tunes_pipe3_preinit, + [PTS_PIPE3_INIT] = gs101_tunes_pipe3_init, + [PTS_PIPE3_POSTLOCK] = gs101_tunes_pipe3_postlock, +}; + +static const char * const gs101_clk_names[] = { + "phy", "ctrl_aclk", "ctrl_pclk", "scl_pclk", +}; + +static const char * const gs101_regulator_names[] = { + "pll", + "dvdd-usb20", "vddh-usb20", "vdd33-usb20", + "vdda-usbdp", "vddh-usbdp", +}; + +static const struct exynos5_usbdrd_phy_drvdata gs101_usbd31rd_phy = { + .phy_cfg = phy_cfg_gs101, + .phy_tunes = gs101_tunes, + .phy_ops = &gs101_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = GS101_PHY_CTRL_USB20, + .pmu_offset_usbdrd0_phy_ss = GS101_PHY_CTRL_USBDP, + .clk_names = gs101_clk_names, + .n_clks = ARRAY_SIZE(gs101_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = gs101_regulator_names, + .n_regulators = ARRAY_SIZE(gs101_regulator_names), +}; + +static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { + { + .compatible = "google,gs101-usb31drd-phy", + .data = &gs101_usbd31rd_phy + }, { + .compatible = "samsung,exynos2200-usb32drd-phy", + .data = &exynos2200_usb32drd_phy, + }, { + .compatible = "samsung,exynos5250-usbdrd-phy", + .data = &exynos5250_usbdrd_phy + }, { + .compatible = "samsung,exynos5420-usbdrd-phy", + .data = &exynos5420_usbdrd_phy + }, { + .compatible = "samsung,exynos5433-usbdrd-phy", + .data = &exynos5433_usbdrd_phy + }, { + .compatible = "samsung,exynos7-usbdrd-phy", + .data = &exynos7_usbdrd_phy + }, { + .compatible = "samsung,exynos7870-usbdrd-phy", + .data = &exynos7870_usbdrd_phy + }, { + .compatible = "samsung,exynos850-usbdrd-phy", + .data = &exynos850_usbdrd_phy + }, { + .compatible = "samsung,exynos990-usbdrd-phy", + .data = &exynos990_usbdrd_phy + }, { + .compatible = "samsung,exynosautov920-usb31drd-combo-ssphy", + .data = &exynosautov920_usb31drd_combo_ssphy + }, { + .compatible = "samsung,exynosautov920-usbdrd-combo-hsphy", + .data = &exynosautov920_usbdrd_combo_hsphy + }, { + .compatible = "samsung,exynosautov920-usbdrd-phy", + .data = &exynosautov920_usbdrd_phy + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match); + +static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct exynos5_usbdrd_phy *phy_drd; + struct phy_provider *phy_provider; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct regmap *reg_pmu; + u32 pmu_offset; + int i, ret; + int channel; + + phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL); + if (!phy_drd) + return -ENOMEM; + + dev_set_drvdata(dev, phy_drd); + phy_drd->dev = dev; + + drv_data = of_device_get_match_data(dev); + if (!drv_data) + return -EINVAL; + phy_drd->drv_data = drv_data; + + ret = devm_mutex_init(dev, &phy_drd->phy_mutex); + if (ret) + return ret; + + if (of_property_present(dev->of_node, "reg-names")) { + void __iomem *reg; + + reg = devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + phy_drd->reg_phy = reg; + + reg = devm_platform_ioremap_resource_byname(pdev, "pcs"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + phy_drd->reg_pcs = reg; + + reg = devm_platform_ioremap_resource_byname(pdev, "pma"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + phy_drd->reg_pma = reg; + } else { + /* DTB with just a single region */ + phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy_drd->reg_phy)) + return PTR_ERR(phy_drd->reg_phy); + } + + /* + * USB32DRD 4nm controller implements Synopsys eUSB2.0 PHY + * and Synopsys SS/USBDP COMBOPHY, managed by external code. + */ + if (of_property_present(dev->of_node, "phy-names")) { + phy_drd->hs_phy = devm_of_phy_get(dev, dev->of_node, "hs"); + if (IS_ERR(phy_drd->hs_phy)) + return dev_err_probe(dev, PTR_ERR(phy_drd->hs_phy), + "failed to get hs_phy\n"); + } + + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); + if (ret) + return ret; + + reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(reg_pmu)) + return dev_err_probe(dev, PTR_ERR(reg_pmu), + "Failed to lookup PMU regmap\n"); + + /* + * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with + * each having separate power control registers. + * 'channel' facilitates to set such registers. + */ + channel = of_alias_get_id(node, "usbdrdphy"); + if (channel < 0) + dev_dbg(dev, "Not a multi-controller usbdrd phy\n"); + + /* Get regulators */ + phy_drd->regulators = devm_kcalloc(dev, + drv_data->n_regulators, + sizeof(*phy_drd->regulators), + GFP_KERNEL); + if (!phy_drd->regulators) + return -ENOMEM; + regulator_bulk_set_supply_names(phy_drd->regulators, + drv_data->regulator_names, + drv_data->n_regulators); + ret = devm_regulator_bulk_get(dev, drv_data->n_regulators, + phy_drd->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + ret = exynos5_usbdrd_setup_notifiers(phy_drd); + if (ret) + return ret; + + dev_vdbg(dev, "Creating usbdrd_phy phy\n"); + + for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, NULL, drv_data->phy_ops); + + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "Failed to create usbdrd_phy phy\n"); + + phy_drd->phys[i].phy = phy; + phy_drd->phys[i].index = i; + phy_drd->phys[i].reg_pmu = reg_pmu; + switch (channel) { + case 1: + pmu_offset = drv_data->pmu_offset_usbdrd1_phy; + break; + case 0: + default: + pmu_offset = drv_data->pmu_offset_usbdrd0_phy; + if (i == EXYNOS5_DRDPHY_PIPE3 && drv_data + ->pmu_offset_usbdrd0_phy_ss) + pmu_offset = drv_data->pmu_offset_usbdrd0_phy_ss; + break; + } + phy_drd->phys[i].pmu_offset = pmu_offset; + phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; + phy_set_drvdata(phy, &phy_drd->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos5_usbdrd_phy_xlate); + if (IS_ERR(phy_provider)) + return dev_err_probe(phy_drd->dev, PTR_ERR(phy_provider), + "Failed to register phy provider\n"); + + return 0; +} + +static struct platform_driver exynos5_usb3drd_phy = { + .probe = exynos5_usbdrd_phy_probe, + .driver = { + .of_match_table = exynos5_usbdrd_phy_of_match, + .name = "exynos5_usb3drd_phy", + .suppress_bind_attrs = true, + } +}; + +module_platform_driver(exynos5_usb3drd_phy); +MODULE_DESCRIPTION("Samsung Exynos5 SoCs USB 3.0 DRD controller PHY driver"); +MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c new file mode 100644 index 000000000..595adba5f --- /dev/null +++ b/drivers/phy/samsung/phy-exynos5250-sata.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SATA SerDes(PHY) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Girish K S <ks.giri@samsung.com> + * Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> +#include <linux/mfd/syscon.h> + +#define SATAPHY_CONTROL_OFFSET 0x0724 +#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0) +#define EXYNOS5_SATA_RESET 0x4 +#define RESET_GLOBAL_RST_N BIT(0) +#define RESET_CMN_RST_N BIT(1) +#define RESET_CMN_BLOCK_RST_N BIT(2) +#define RESET_CMN_I2C_RST_N BIT(3) +#define RESET_TX_RX_PIPE_RST_N BIT(4) +#define RESET_TX_RX_BLOCK_RST_N BIT(5) +#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7)) +#define LINK_RESET 0xf0000 +#define EXYNOS5_SATA_MODE0 0x10 +#define SATA_SPD_GEN3 BIT(1) +#define EXYNOS5_SATA_CTRL0 0x14 +#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9) +#define CTRL0_P0_PHY_CALIBRATED BIT(8) +#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0 +#define PHCTRLM_REF_RATE BIT(1) +#define PHCTRLM_HIGH_SPEED BIT(0) +#define EXYNOS5_SATA_PHSATA_STATM 0xf0 +#define PHSTATM_PLL_LOCKED BIT(0) + +#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000)) + +struct exynos_sata_phy { + struct phy *phy; + struct clk *phyclk; + void __iomem *regs; + struct regmap *pmureg; + struct i2c_client *client; +}; + +static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, + u32 status) +{ + unsigned long timeout = jiffies + PHY_PLL_TIMEOUT; + + while (time_before(jiffies, timeout)) { + if ((readl(base + reg) & checkbit) == status) + return 0; + } + + return -EFAULT; +} + +static int exynos_sata_phy_power_on(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + +} + +static int exynos_sata_phy_power_off(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, false); + +} + +static int exynos_sata_phy_init(struct phy *phy) +{ + u32 val = 0; + int ret = 0; + u8 buf[] = { 0x3a, 0x0b }; + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + if (ret != 0) + dev_err(&sata_phy->phy->dev, "phy init failed\n"); + + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N + | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N + | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= LINK_RESET; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val &= ~PHCTRLM_REF_RATE; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + /* High speed enable for Gen3 */ + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val |= PHCTRLM_HIGH_SPEED; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0); + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED; + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0); + + val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0); + val |= SATA_SPD_GEN3; + writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0); + + ret = i2c_master_send(sata_phy->client, buf, sizeof(buf)); + if (ret < 0) + return ret; + + /* release cmu reset */ + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val &= ~RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + ret = wait_for_reg_status(sata_phy->regs, + EXYNOS5_SATA_PHSATA_STATM, + PHSTATM_PLL_LOCKED, 1); + if (ret < 0) + dev_err(&sata_phy->phy->dev, + "PHY PLL locking failed\n"); + return ret; +} + +static const struct phy_ops exynos_sata_phy_ops = { + .init = exynos_sata_phy_init, + .power_on = exynos_sata_phy_power_on, + .power_off = exynos_sata_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_sata_phy_probe(struct platform_device *pdev) +{ + struct exynos_sata_phy *sata_phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct device_node *node; + int ret = 0; + + sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL); + if (!sata_phy) + return -ENOMEM; + + sata_phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(sata_phy->regs)) + return PTR_ERR(sata_phy->regs); + + sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,syscon-phandle"); + if (IS_ERR(sata_phy->pmureg)) { + dev_err(dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(sata_phy->pmureg); + } + + node = of_parse_phandle(dev->of_node, + "samsung,exynos-sataphy-i2c-phandle", 0); + if (!node) + return -EINVAL; + + sata_phy->client = of_find_i2c_device_by_node(node); + of_node_put(node); + if (!sata_phy->client) + return -EPROBE_DEFER; + + dev_set_drvdata(dev, sata_phy); + + sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); + if (IS_ERR(sata_phy->phyclk)) { + dev_err(dev, "failed to get clk for PHY\n"); + ret = PTR_ERR(sata_phy->phyclk); + goto put_dev; + } + + ret = clk_prepare_enable(sata_phy->phyclk); + if (ret < 0) { + dev_err(dev, "failed to enable source clk\n"); + goto put_dev; + } + + sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); + if (IS_ERR(sata_phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + ret = PTR_ERR(sata_phy->phy); + goto clk_disable; + } + + phy_set_drvdata(sata_phy->phy, sata_phy); + + phy_provider = devm_of_phy_provider_register(dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + goto clk_disable; + } + + return 0; + +clk_disable: + clk_disable_unprepare(sata_phy->phyclk); +put_dev: + put_device(&sata_phy->client->dev); + + return ret; +} + +static const struct of_device_id exynos_sata_phy_of_match[] = { + { .compatible = "samsung,exynos5250-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match); + +static struct platform_driver exynos_sata_phy_driver = { + .probe = exynos_sata_phy_probe, + .driver = { + .of_match_table = exynos_sata_phy_of_match, + .name = "samsung,sata-phy", + .suppress_bind_attrs = true, + } +}; +module_platform_driver(exynos_sata_phy_driver); + +MODULE_DESCRIPTION("Samsung SerDes PHY driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>"); +MODULE_AUTHOR("Yuvaraj C D <yuvaraj.cd@samsung.com>"); diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c new file mode 100644 index 000000000..21b06072f --- /dev/null +++ b/drivers/phy/samsung/phy-exynos5250-usb2.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0 +#define EXYNOS_5250_REFCLKSEL_XO 0x1 +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2 + +#define EXYNOS_5250_FSEL_9MHZ6 0x0 +#define EXYNOS_5250_FSEL_10MHZ 0x1 +#define EXYNOS_5250_FSEL_12MHZ 0x2 +#define EXYNOS_5250_FSEL_19MHZ2 0x3 +#define EXYNOS_5250_FSEL_20MHZ 0x4 +#define EXYNOS_5250_FSEL_24MHZ 0x5 +#define EXYNOS_5250_FSEL_50MHZ 0x7 + +/* Normal host */ +#define EXYNOS_5250_HOSTPHYCTRL0 0x0 + +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL BIT(31) +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19 +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16 +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \ + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN BIT(11) +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE BIT(10) +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N BIT(9) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ BIT(6) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP BIT(5) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST BIT(2) +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST BIT(1) +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST BIT(0) + +/* HSIC0 & HSIC1 */ +#define EXYNOS_5250_HSICPHYCTRL1 0x10 +#define EXYNOS_5250_HSICPHYCTRL2 0x20 + +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK (0x3 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT (0x2 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK (0x7f << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 (0x24 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15 (0x1c << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16 (0x1a << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2 (0x15 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20 (0x14 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_SIDDQ BIT(6) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP BIT(5) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST BIT(2) +#define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST BIT(0) + +/* EHCI control */ +#define EXYNOS_5250_HOSTEHCICTRL 0x30 +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN BIT(29) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 BIT(28) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 BIT(27) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 BIT(26) +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN BIT(25) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \ + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE BIT(0) + +/* OHCI control */ +#define EXYNOS_5250_HOSTOHCICTRL 0x34 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \ + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT) +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN BIT(0) + +/* USBOTG */ +#define EXYNOS_5250_USBOTGSYS 0x38 +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET BIT(14) +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG BIT(13) +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST BIT(12) +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9 +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP BIT(8) +#define EXYNOS_5250_USBOTGSYS_COMMON_ON BIT(7) +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4 +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP BIT(3) +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE BIT(2) +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG BIT(1) +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND BIT(0) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704 +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_5420_USB_ISOL_HOST_OFFSET 0x70C +#define EXYNOS_5250_USB_ISOL_ENABLE BIT(0) + +/* Mode switch register */ +#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230 +#define EXYNOS_5250_MODE_SWITCH_MASK 1 +#define EXYNOS_5250_MODE_SWITCH_DEVICE 0 +#define EXYNOS_5250_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS5250_DEVICE, + EXYNOS5250_HOST, + EXYNOS5250_HSIC0, + EXYNOS5250_HSIC1, +}; + +/* + * exynos5250_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_5250_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_5250_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_5250_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_5250_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_5250_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_5250_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_5250_FSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_5250_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask = EXYNOS_5250_USB_ISOL_ENABLE; + + if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_DEVICE) + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; + else if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; + else if (drv->cfg == &exynos5420_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) + offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET; + else + return; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 ehci; + u32 ohci; + u32 hsic; + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + regmap_update_bits(drv->reg_sys, + EXYNOS_5250_MODE_SWITCH_OFFSET, + EXYNOS_5250_MODE_SWITCH_MASK, + EXYNOS_5250_MODE_SWITCH_DEVICE); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(100); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_OTGDISABLE); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + + + break; + case EXYNOS5250_HOST: + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + /* Host registers configuration */ + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + /* The clock */ + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK; + ctrl0 |= drv->ref_reg_val << + EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT; + + /* Reset */ + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL | + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP); + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST | + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N; + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + udelay(10); + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(10); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET); + + /* HSIC phy configuration */ + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_PHYSWRST); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + udelay(10); + hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST; + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + + /* Enable EHCI DMA burst */ + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16; + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + + /* OHCI settings */ + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + /* Following code is based on the old driver */ + ohci |= 0x1 << 3; + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + + break; + } + exynos5250_isol(inst, 0); + + return 0; +} + +static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 hsic; + + exynos5250_isol(inst, 1); + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + break; + case EXYNOS5250_HOST: + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + break; + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_SIDDQ | + EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP | + EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND + ); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + break; + } + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos5250_phys[] = { + { + .label = "device", + .id = EXYNOS5250_DEVICE, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS5250_HSIC1, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + +static const struct samsung_usb2_common_phy exynos5420_phys[] = { + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = ARRAY_SIZE(exynos5250_phys), + .phys = exynos5250_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; + +const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = ARRAY_SIZE(exynos5420_phys), + .phys = exynos5420_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-exynos7-ufs.c b/drivers/phy/samsung/phy-exynos7-ufs.c new file mode 100644 index 000000000..15eec1d9e --- /dev/null +++ b/drivers/phy/samsung/phy-exynos7-ufs.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung EXYNOS7 SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720 +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) + +#define EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY), + /* Setting order: 1st(0x16, 2nd(0x15) */ + PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY), + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B), + PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A), + PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B atfer PMC */ +static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = { + PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY), + END_UFS_PHY_CFG +}; + +static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynos7_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg, +}; + +static const char * const exynos7_ufs_phy_clks[] = { + "tx0_symbol_clk", "rx0_symbol_clk", "rx1_symbol_clk", "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynos7_ufs_phy = { + .cfgs = exynos7_ufs_phy_cfgs, + .isol = { + .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynos7_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynos7_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, + .wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq, +}; diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c new file mode 100644 index 000000000..9c3e030f0 --- /dev/null +++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung EXYNOSAUTO v9 SoC + * + * Copyright (C) 2021 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL 0x728 +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +#define PHY_TRSV_REG_CFG_AUTOV9(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, 0x50) + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x023, 0x80, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x01d, 0x10, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x044, 0xb5, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x43, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x05b, 0x20, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x05e, 0xc0, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x038, 0x12, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x059, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x06c, 0x18, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x06d, 0x02, PWR_MODE_ANY), + + PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY), + + END_UFS_PHY_CFG, +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = { + PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY), + + PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | + PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), + + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg *exynosautov9_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynosautov9_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynosautov9_pre_pwr_hs_cfg, +}; + +static const char * const exynosautov9_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy = { + .cfgs = exynosautov9_ufs_phy_cfgs, + .isol = { + .offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynosautov9_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynosautov9_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, + .wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq, +}; diff --git a/drivers/phy/samsung/phy-exynosautov920-ufs.c b/drivers/phy/samsung/phy-exynosautov920-ufs.c new file mode 100644 index 000000000..21ef79c42 --- /dev/null +++ b/drivers/phy/samsung/phy-exynosautov920-ufs.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Samsung ExynosAuto v920 SoC + * + * Copyright (C) 2024 Samsung Electronics Co., Ltd. + */ + +#include "phy-samsung-ufs.h" + +#define EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CTRL 0x708 +#define EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e + +#define EXYNOSAUTOV920_CDR_LOCK_OFFSET 0xce4 + +#define PHY_EXYNOSAUTOV920_LANE_OFFSET 0x200 +#define PHY_TRSV_REG_CFG_AUTOV920(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_EXYNOSAUTOV920_LANE_OFFSET) + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg exynosautov920_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x29, 0x22, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x43, 0x10, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x3c, 0x14, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x46, 0x48, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x04, 0x95, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x06, 0x30, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV920(0x200, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x201, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x202, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x203, 0x0a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x204, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x205, 0x10, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x207, 0x0c, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2e1, 0xc0, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x22d, 0xf8, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x234, 0x60, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x238, 0x13, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x239, 0x48, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x23a, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x23b, 0x29, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x23c, 0x2a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x23d, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x23e, 0x14, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x23f, 0x13, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV920(0x240, 0x4a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x243, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x244, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x25d, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x25e, 0x3f, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x25f, 0xff, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x26f, 0xf0, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x273, 0x33, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x274, 0x50, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV920(0x284, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x285, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2a2, 0x04, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x27d, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2fa, 0x01, PWR_MODE_ANY), + + PHY_TRSV_REG_CFG_AUTOV920(0x286, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x287, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x288, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x289, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2b3, 0x04, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2b6, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2b7, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2b8, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2b9, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2ba, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2bb, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2bc, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2bd, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x2be, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x34b, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x34c, 0x24, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x34d, 0x23, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x34e, 0x45, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x34f, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x350, 0x31, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x351, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x352, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x353, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x354, 0x01, PWR_MODE_ANY), + + PHY_COMN_REG_CFG(0x43, 0x18, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x43, 0x00, PWR_MODE_ANY), + + END_UFS_PHY_CFG, +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg exynosautov920_pre_pwr_hs_cfg[] = { + PHY_TRSV_REG_CFG_AUTOV920(0x369, 0x11, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x246, 0x03, PWR_MODE_ANY), + + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg exynosautov920_post_pwr_hs_cfg[] = { + END_UFS_PHY_CFG, +}; + +#define DELAY_IN_US 40 +#define RETRY_CNT 100 +#define EXYNOSAUTOV920_CDR_LOCK_MASK 0x8 + +int exynosautov920_ufs_phy_wait_cdr_lock(struct phy *phy, u8 lane) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + u32 reg, i; + + struct samsung_ufs_phy_cfg cfg[4] = { + PHY_TRSV_REG_CFG_AUTOV920(0x222, 0x10, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x222, 0x18, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV920(0x246, 0x01, PWR_MODE_ANY), + END_UFS_PHY_CFG, + }; + + for (i = 0; i < RETRY_CNT; i++) { + udelay(DELAY_IN_US); + + reg = readl(ufs_phy->reg_pma + EXYNOSAUTOV920_CDR_LOCK_OFFSET + + (PHY_APB_ADDR(PHY_EXYNOSAUTOV920_LANE_OFFSET) * lane)); + + if ((reg & EXYNOSAUTOV920_CDR_LOCK_MASK) + == EXYNOSAUTOV920_CDR_LOCK_MASK) { + samsung_ufs_phy_config(ufs_phy, &cfg[2], lane); + return 0; + } + + udelay(DELAY_IN_US); + + /* Disable and enable CDR */ + samsung_ufs_phy_config(ufs_phy, &cfg[0], lane); + samsung_ufs_phy_config(ufs_phy, &cfg[1], lane); + } + + dev_err(ufs_phy->dev, "failed to get phy cdr lock\n"); + return -ETIMEDOUT; +} + +static const struct samsung_ufs_phy_cfg *exynosautov920_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = exynosautov920_pre_init_cfg, + [CFG_PRE_PWR_HS] = exynosautov920_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = exynosautov920_post_pwr_hs_cfg, +}; + +static const char * const exynosautov920_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata exynosautov920_ufs_phy = { + .cfgs = exynosautov920_ufs_phy_cfgs, + .isol = { + .offset = EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CTRL, + .mask = EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = exynosautov920_ufs_phy_clks, + .num_clks = ARRAY_SIZE(exynosautov920_ufs_phy_clks), + .cdr_lock_status_offset = EXYNOSAUTOV920_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, + .wait_for_cdr = exynosautov920_ufs_phy_wait_cdr_lock, +}; diff --git a/drivers/phy/samsung/phy-fsd-ufs.c b/drivers/phy/samsung/phy-fsd-ufs.c new file mode 100644 index 000000000..f2361746d --- /dev/null +++ b/drivers/phy/samsung/phy-fsd-ufs.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for FSD SoC + * + * Copyright (C) 2022 Samsung Electronics Co., Ltd. + * + */ +#include "phy-samsung-ufs.h" + +#define FSD_EMBEDDED_COMBO_PHY_CTRL 0x724 +#define FSD_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1 +#define FSD_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0) +#define FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x6e + +static const struct samsung_ufs_phy_cfg fsd_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY), + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY), + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg fsd_pre_pwr_hs_cfg[] = { + END_UFS_PHY_CFG +}; + +/* Calibration for HS mode series A/B atfer PMC */ +static const struct samsung_ufs_phy_cfg fsd_post_pwr_hs_cfg[] = { + END_UFS_PHY_CFG +}; + +static const struct samsung_ufs_phy_cfg *fsd_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = fsd_pre_init_cfg, + [CFG_PRE_PWR_HS] = fsd_pre_pwr_hs_cfg, + [CFG_POST_PWR_HS] = fsd_post_pwr_hs_cfg, +}; + +static const char * const fsd_ufs_phy_clks[] = { + "ref_clk", +}; + +const struct samsung_ufs_phy_drvdata fsd_ufs_phy = { + .cfgs = fsd_ufs_phy_cfgs, + .isol = { + .offset = FSD_EMBEDDED_COMBO_PHY_CTRL, + .mask = FSD_EMBEDDED_COMBO_PHY_CTRL_MASK, + .en = FSD_EMBEDDED_COMBO_PHY_CTRL_EN, + }, + .clk_list = fsd_ufs_phy_clks, + .num_clks = ARRAY_SIZE(fsd_ufs_phy_clks), + .cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS, + .wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq, +}; diff --git a/drivers/phy/samsung/phy-gs101-ufs.c b/drivers/phy/samsung/phy-gs101-ufs.c new file mode 100644 index 000000000..a15e1f453 --- /dev/null +++ b/drivers/phy/samsung/phy-gs101-ufs.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver data for Google Tensor gs101 SoC + * + * Copyright (C) 2024 Linaro Ltd + * Author: Peter Griffin <peter.griffin@linaro.org> + */ + +#include "phy-samsung-ufs.h" + +#define TENSOR_GS101_PHY_CTRL 0x3ec8 +#define TENSOR_GS101_PHY_CTRL_MASK 0x1 +#define TENSOR_GS101_PHY_CTRL_EN BIT(0) +#define PHY_GS101_LANE_OFFSET 0x200 +#define TRSV_REG338 0x338 +#define LN0_MON_RX_CAL_DONE BIT(3) +#define TRSV_REG339 0x339 +#define LN0_MON_RX_CDR_FLD_CK_MODE_DONE BIT(3) +#define TRSV_REG222 0x222 +#define LN0_OVRD_RX_CDR_EN BIT(4) +#define LN0_RX_CDR_EN BIT(3) + +#define PHY_PMA_TRSV_ADDR(reg, lane) (PHY_APB_ADDR((reg) + \ + ((lane) * PHY_GS101_LANE_OFFSET))) + +#define PHY_TRSV_REG_CFG_GS101(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_GS101_LANE_OFFSET) + +/* Calibration for phy initialization */ +static const struct samsung_ufs_phy_cfg tensor_gs101_pre_init_cfg[] = { + PHY_COMN_REG_CFG(0x43, 0x10, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x3C, 0x14, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x46, 0x48, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x200, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x201, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x202, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x203, 0x0a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x204, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x205, 0x11, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x207, 0x0c, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2E1, 0xc0, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x22D, 0xb8, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x234, 0x60, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x238, 0x13, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x239, 0x48, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x23A, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x23B, 0x25, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x23C, 0x2a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x23D, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x23E, 0x13, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x23F, 0x13, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x240, 0x4a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x243, 0x40, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x244, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x25D, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x25E, 0x3f, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x25F, 0xff, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x273, 0x33, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x274, 0x50, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x284, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x285, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2A2, 0x04, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x25D, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2FA, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x286, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x287, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x288, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x289, 0x03, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2B3, 0x04, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2B6, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2B7, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2B8, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2B9, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2BA, 0x0b, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2BB, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2BC, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2BD, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x29E, 0x06, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2E4, 0x1a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2ED, 0x25, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x269, 0x1a, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x2F4, 0x2f, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x34B, 0x01, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x34C, 0x23, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x34D, 0x23, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x34E, 0x45, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x34F, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x350, 0x31, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x351, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x352, 0x02, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x353, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x354, 0x01, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x43, 0x18, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x43, 0x00, PWR_MODE_ANY), + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg tensor_gs101_pre_pwr_hs_config[] = { + PHY_TRSV_REG_CFG_GS101(0x369, 0x11, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x246, 0x03, PWR_MODE_ANY), +}; + +/* Calibration for HS mode series A/B */ +static const struct samsung_ufs_phy_cfg tensor_gs101_post_pwr_hs_config[] = { + PHY_COMN_REG_CFG(0x8, 0x60, PWR_MODE_PWM_ANY), + PHY_TRSV_REG_CFG_GS101(0x222, 0x08, PWR_MODE_PWM_ANY), + PHY_TRSV_REG_CFG_GS101(0x246, 0x01, PWR_MODE_ANY), + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg tensor_gs101_post_h8_enter[] = { + PHY_TRSV_REG_CFG_GS101(0x262, 0x08, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x265, 0x0A, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x1, 0x8, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x0, 0x86, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x8, 0x60, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_GS101(0x222, 0x08, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_GS101(0x246, 0x01, PWR_MODE_HS_ANY), + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg tensor_gs101_pre_h8_exit[] = { + PHY_COMN_REG_CFG(0x0, 0xC6, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x1, 0x0C, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x262, 0x00, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_GS101(0x265, 0x00, PWR_MODE_ANY), + PHY_COMN_REG_CFG(0x8, 0xE0, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_GS101(0x246, 0x03, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_GS101(0x222, 0x18, PWR_MODE_HS_ANY), + END_UFS_PHY_CFG, +}; + +static const struct samsung_ufs_phy_cfg *tensor_gs101_ufs_phy_cfgs[CFG_TAG_MAX] = { + [CFG_PRE_INIT] = tensor_gs101_pre_init_cfg, + [CFG_PRE_PWR_HS] = tensor_gs101_pre_pwr_hs_config, + [CFG_POST_PWR_HS] = tensor_gs101_post_pwr_hs_config, +}; + +static const struct samsung_ufs_phy_cfg *tensor_gs101_hibern8_cfgs[] = { + [CFG_POST_HIBERN8_ENTER] = tensor_gs101_post_h8_enter, + [CFG_PRE_HIBERN8_EXIT] = tensor_gs101_pre_h8_exit, +}; + +static const char * const tensor_gs101_ufs_phy_clks[] = { + "ref_clk", +}; + +static int gs101_phy_wait_for_calibration(struct phy *phy, u8 lane) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const unsigned int timeout_us = 40000; + const unsigned int sleep_us = 40; + u32 val; + u32 off; + int err; + + off = PHY_PMA_TRSV_ADDR(TRSV_REG338, lane); + + err = readl_poll_timeout(ufs_phy->reg_pma + off, + val, (val & LN0_MON_RX_CAL_DONE), + sleep_us, timeout_us); + + if (err) { + dev_err(ufs_phy->dev, + "failed to get phy cal done %d\n", err); + } + + return err; +} + +#define DELAY_IN_US 40 +#define RETRY_CNT 100 +static int gs101_phy_wait_for_cdr_lock(struct phy *phy, u8 lane) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + u32 val; + int i; + + for (i = 0; i < RETRY_CNT; i++) { + udelay(DELAY_IN_US); + val = readl(ufs_phy->reg_pma + + PHY_PMA_TRSV_ADDR(TRSV_REG339, lane)); + + if (val & LN0_MON_RX_CDR_FLD_CK_MODE_DONE) + return 0; + + udelay(DELAY_IN_US); + /* Override and enable clock data recovery */ + writel(LN0_OVRD_RX_CDR_EN, ufs_phy->reg_pma + + PHY_PMA_TRSV_ADDR(TRSV_REG222, lane)); + writel(LN0_OVRD_RX_CDR_EN | LN0_RX_CDR_EN, + ufs_phy->reg_pma + PHY_PMA_TRSV_ADDR(TRSV_REG222, lane)); + } + dev_err(ufs_phy->dev, "failed to get cdr lock\n"); + return -ETIMEDOUT; +} + +const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy = { + .cfgs = tensor_gs101_ufs_phy_cfgs, + .cfgs_hibern8 = tensor_gs101_hibern8_cfgs, + .isol = { + .offset = TENSOR_GS101_PHY_CTRL, + .mask = TENSOR_GS101_PHY_CTRL_MASK, + .en = TENSOR_GS101_PHY_CTRL_EN, + }, + .clk_list = tensor_gs101_ufs_phy_clks, + .num_clks = ARRAY_SIZE(tensor_gs101_ufs_phy_clks), + .wait_for_cal = gs101_phy_wait_for_calibration, + .wait_for_cdr = gs101_phy_wait_for_cdr_lock, +}; diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c new file mode 100644 index 000000000..32be62e49 --- /dev/null +++ b/drivers/phy/samsung/phy-s5pv210-usb2.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Kamil Debski <k.debski@samsung.com> + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define S5PV210_UPHYPWR 0x0 + +#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define S5PV210_UPHYPWR_PHY0_PWR BIT(3) +#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define S5PV210_UPHYPWR_PHY0 ( \ + S5PV210_UPHYPWR_PHY0_SUSPEND | \ + S5PV210_UPHYPWR_PHY0_PWR | \ + S5PV210_UPHYPWR_PHY0_OTG_PWR) + +#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define S5PV210_UPHYPWR_PHY1_PWR BIT(7) +#define S5PV210_UPHYPWR_PHY1 ( \ + S5PV210_UPHYPWR_PHY1_SUSPEND | \ + S5PV210_UPHYPWR_PHY1_PWR) + +/* PHY clock control */ +#define S5PV210_UPHYCLK 0x4 + +#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define S5PV210_UPHYRST 0x8 + +#define S5PV210_URSTCON_PHY0 BIT(0) +#define S5PV210_URSTCON_OTG_HLINK BIT(1) +#define S5PV210_URSTCON_OTG_PHYLINK BIT(2) +#define S5PV210_URSTCON_PHY1_ALL BIT(3) +#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4) + +/* Isolation, configured in the power management unit */ +#define S5PV210_USB_ISOL_OFFSET 0x680c +#define S5PV210_USB_ISOL_DEVICE BIT(0) +#define S5PV210_USB_ISOL_HOST BIT(1) + + +enum s5pv210_phy_id { + S5PV210_DEVICE, + S5PV210_HOST, + S5PV210_NUM_PHYS, +}; + +/* + * s5pv210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 mask; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + mask = S5PV210_USB_ISOL_DEVICE; + break; + case S5PV210_HOST: + mask = S5PV210_USB_ISOL_HOST; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET, + mask, on ? 0 : mask); +} + +static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + phypwr = S5PV210_UPHYPWR_PHY0; + rstbits = S5PV210_URSTCON_PHY0; + break; + case S5PV210_HOST: + phypwr = S5PV210_UPHYPWR_PHY1; + rstbits = S5PV210_URSTCON_PHY1_ALL | + S5PV210_URSTCON_HOST_LINK_ALL; + break; + } + + if (on) { + writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK); + + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + + rst = readl(drv->reg_phy + S5PV210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed + */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + } +} + +static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_isol(inst, 0); + s5pv210_phy_pwr(inst, 1); + + return 0; +} + +static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_phy_pwr(inst, 0); + s5pv210_isol(inst, 1); + + return 0; +} + +static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = { + [S5PV210_DEVICE] = { + .label = "device", + .id = S5PV210_DEVICE, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, + [S5PV210_HOST] = { + .label = "host", + .id = S5PV210_HOST, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, +}; + +const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = { + .num_phys = ARRAY_SIZE(s5pv210_phys), + .phys = s5pv210_phys, + .rate_to_clk = s5pv210_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c new file mode 100644 index 000000000..ee665f26c --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-ufs.c @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UFS PHY driver for Samsung SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * Author: Seungwon Jeon <essuuj@gmail.com> + * Author: Alim Akhtar <alim.akhtar@samsung.com> + * + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "phy-samsung-ufs.h" + +#define for_each_phy_lane(phy, i) \ + for (i = 0; i < (phy)->lane_cnt; i++) +#define for_each_phy_cfg(cfg) \ + for (; (cfg)->id; (cfg)++) + +#define PHY_DEF_LANE_CNT 1 + +void samsung_ufs_phy_config(struct samsung_ufs_phy *phy, + const struct samsung_ufs_phy_cfg *cfg, + u8 lane) +{ + enum {LANE_0, LANE_1}; /* lane index */ + + switch (lane) { + case LANE_0: + writel(cfg->val, (phy)->reg_pma + cfg->off_0); + break; + case LANE_1: + if (cfg->id == PHY_TRSV_BLK) + writel(cfg->val, (phy)->reg_pma + cfg->off_1); + break; + } +} + +int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy, u8 lane) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const unsigned int timeout_us = 100000; + const unsigned int sleep_us = 10; + u32 val; + int err; + + err = readl_poll_timeout( + ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS), + val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us); + if (err) { + dev_err(ufs_phy->dev, + "failed to get phy pll lock acquisition %d\n", err); + goto out; + } + + err = readl_poll_timeout( + ufs_phy->reg_pma + + PHY_APB_ADDR(ufs_phy->drvdata->cdr_lock_status_offset), + val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us); + if (err) + dev_err(ufs_phy->dev, + "failed to get phy cdr lock acquisition %d\n", err); +out: + return err; +} + +static int samsung_ufs_phy_calibrate(struct phy *phy) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const struct samsung_ufs_phy_cfg * const *cfgs = ufs_phy->cfgs; + const struct samsung_ufs_phy_cfg *cfg; + int err = 0; + int i; + + if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT || + ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) { + dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state); + return -EINVAL; + } + + cfg = cfgs[ufs_phy->ufs_phy_state]; + if (!cfg) + goto out; + + for_each_phy_cfg(cfg) { + for_each_phy_lane(ufs_phy, i) { + samsung_ufs_phy_config(ufs_phy, cfg, i); + } + } + + for_each_phy_lane(ufs_phy, i) { + if (ufs_phy->ufs_phy_state == CFG_PRE_INIT && + ufs_phy->drvdata->wait_for_cal) { + err = ufs_phy->drvdata->wait_for_cal(phy, i); + if (err) + goto out; + } + + if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS && + ufs_phy->drvdata->wait_for_cdr) { + err = ufs_phy->drvdata->wait_for_cdr(phy, i); + if (err) + goto out; + } + } + + /** + * In Samsung ufshci, PHY need to be calibrated at different + * stages / state mainly before Linkstartup, after Linkstartup, + * before power mode change and after power mode change. + * Below state machine to make sure to calibrate PHY in each + * state. Here after configuring PHY in a given state, will + * change the state to next state so that next state phy + * calibration value can be programed + */ +out: + switch (ufs_phy->ufs_phy_state) { + case CFG_PRE_INIT: + ufs_phy->ufs_phy_state = CFG_POST_INIT; + break; + case CFG_POST_INIT: + ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS; + break; + case CFG_PRE_PWR_HS: + ufs_phy->ufs_phy_state = CFG_POST_PWR_HS; + break; + case CFG_POST_PWR_HS: + /* Change back to INIT state */ + ufs_phy->ufs_phy_state = CFG_PRE_INIT; + break; + default: + dev_err(ufs_phy->dev, "wrong state for phy calibration\n"); + } + + return err; +} + +static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy) +{ + int i; + const struct samsung_ufs_phy_drvdata *drvdata = phy->drvdata; + int num_clks = drvdata->num_clks; + + phy->clks = devm_kcalloc(phy->dev, num_clks, sizeof(*phy->clks), + GFP_KERNEL); + if (!phy->clks) + return -ENOMEM; + + for (i = 0; i < num_clks; i++) + phy->clks[i].id = drvdata->clk_list[i]; + + return devm_clk_bulk_get(phy->dev, num_clks, phy->clks); +} + +static int samsung_ufs_phy_init(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + ss_phy->lane_cnt = phy->attrs.bus_width; + ss_phy->ufs_phy_state = CFG_PRE_INIT; + + return 0; +} + +static int samsung_ufs_phy_power_on(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + int ret; + + samsung_ufs_phy_ctrl_isol(ss_phy, false); + + ret = clk_bulk_prepare_enable(ss_phy->drvdata->num_clks, ss_phy->clks); + if (ret) { + dev_err(ss_phy->dev, "failed to enable ufs phy clocks\n"); + return ret; + } + + if (ss_phy->ufs_phy_state == CFG_PRE_INIT) { + ret = samsung_ufs_phy_calibrate(phy); + if (ret) + dev_err(ss_phy->dev, "ufs phy calibration failed\n"); + } + + return ret; +} + +static int samsung_ufs_phy_power_off(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + clk_bulk_disable_unprepare(ss_phy->drvdata->num_clks, ss_phy->clks); + + samsung_ufs_phy_ctrl_isol(ss_phy, true); + + return 0; +} + +static int samsung_ufs_phy_set_mode(struct phy *generic_phy, + enum phy_mode mode, int submode) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy); + + ss_phy->mode = PHY_MODE_INVALID; + + if (mode > 0) + ss_phy->mode = mode; + + return 0; +} + +static int samsung_ufs_phy_notify_state(struct phy *phy, + union phy_notify state) +{ + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy); + const struct samsung_ufs_phy_cfg *cfg; + int i, err = -EINVAL; + + if (!ufs_phy->cfgs_hibern8) + return 0; + + if (state.ufs_state == PHY_UFS_HIBERN8_ENTER) + cfg = ufs_phy->cfgs_hibern8[CFG_POST_HIBERN8_ENTER]; + else if (state.ufs_state == PHY_UFS_HIBERN8_EXIT) + cfg = ufs_phy->cfgs_hibern8[CFG_PRE_HIBERN8_EXIT]; + else + goto err_out; + + for_each_phy_cfg(cfg) { + for_each_phy_lane(ufs_phy, i) { + samsung_ufs_phy_config(ufs_phy, cfg, i); + } + } + + if (state.ufs_state == PHY_UFS_HIBERN8_EXIT) { + for_each_phy_lane(ufs_phy, i) { + if (ufs_phy->drvdata->wait_for_cdr) { + err = ufs_phy->drvdata->wait_for_cdr(phy, i); + if (err) + goto err_out; + } + } + } + + return 0; +err_out: + return err; +} + +static int samsung_ufs_phy_exit(struct phy *phy) +{ + struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy); + + ss_phy->ufs_phy_state = CFG_TAG_MAX; + + return 0; +} + +static const struct phy_ops samsung_ufs_phy_ops = { + .init = samsung_ufs_phy_init, + .exit = samsung_ufs_phy_exit, + .power_on = samsung_ufs_phy_power_on, + .power_off = samsung_ufs_phy_power_off, + .calibrate = samsung_ufs_phy_calibrate, + .set_mode = samsung_ufs_phy_set_mode, + .notify_phystate = samsung_ufs_phy_notify_state, + .owner = THIS_MODULE, +}; + +static const struct of_device_id samsung_ufs_phy_match[]; + +static int samsung_ufs_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct samsung_ufs_phy *phy; + struct phy *gen_phy; + struct phy_provider *phy_provider; + const struct samsung_ufs_phy_drvdata *drvdata; + u32 isol_offset; + int err = 0; + + match = of_match_node(samsung_ufs_phy_match, dev->of_node); + if (!match) { + err = -EINVAL; + dev_err(dev, "failed to get match_node\n"); + goto out; + } + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + err = -ENOMEM; + goto out; + } + + phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma"); + if (IS_ERR(phy->reg_pma)) { + err = PTR_ERR(phy->reg_pma); + goto out; + } + + phy->reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(phy->reg_pmu)) { + err = PTR_ERR(phy->reg_pmu); + dev_err(dev, "failed syscon remap for pmu\n"); + goto out; + } + + gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops); + if (IS_ERR(gen_phy)) { + err = PTR_ERR(gen_phy); + dev_err(dev, "failed to create PHY for ufs-phy\n"); + goto out; + } + + drvdata = match->data; + phy->dev = dev; + phy->drvdata = drvdata; + phy->cfgs = drvdata->cfgs; + phy->cfgs_hibern8 = drvdata->cfgs_hibern8; + memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol)); + + if (!of_property_read_u32_index(dev->of_node, "samsung,pmu-syscon", 1, + &isol_offset)) + phy->isol.offset = isol_offset; + + phy->lane_cnt = PHY_DEF_LANE_CNT; + + err = samsung_ufs_phy_clks_init(phy); + if (err) { + dev_err(dev, "failed to get phy clocks\n"); + goto out; + } + + phy_set_drvdata(gen_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + err = PTR_ERR(phy_provider); + dev_err(dev, "failed to register phy-provider\n"); + goto out; + } +out: + return err; +} + +static const struct of_device_id samsung_ufs_phy_match[] = { + { + .compatible = "google,gs101-ufs-phy", + .data = &tensor_gs101_ufs_phy, + }, { + .compatible = "samsung,exynos7-ufs-phy", + .data = &exynos7_ufs_phy, + }, { + .compatible = "samsung,exynosautov9-ufs-phy", + .data = &exynosautov9_ufs_phy, + }, { + .compatible = "samsung,exynosautov920-ufs-phy", + .data = &exynosautov920_ufs_phy, + }, { + .compatible = "tesla,fsd-ufs-phy", + .data = &fsd_ufs_phy, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match); + +static struct platform_driver samsung_ufs_phy_driver = { + .probe = samsung_ufs_phy_probe, + .driver = { + .name = "samsung-ufs-phy", + .of_match_table = samsung_ufs_phy_match, + }, +}; +module_platform_driver(samsung_ufs_phy_driver); +MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver"); +MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>"); +MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h new file mode 100644 index 000000000..f2c2e744e --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-ufs.h @@ -0,0 +1,163 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UFS PHY driver for Samsung EXYNOS SoC + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * Author: Seungwon Jeon <essuuj@gmail.com> + * Author: Alim Akhtar <alim.akhtar@samsung.com> + * + */ +#ifndef _PHY_SAMSUNG_UFS_ +#define _PHY_SAMSUNG_UFS_ + +#include <linux/phy/phy.h> +#include <linux/regmap.h> + +#define PHY_COMN_BLK 1 +#define PHY_TRSV_BLK 2 +#define END_UFS_PHY_CFG { 0 } +#define PHY_TRSV_CH_OFFSET 0x30 +#define PHY_APB_ADDR(off) ((off) << 2) + +#define PHY_COMN_REG_CFG(o, v, d) { \ + .off_0 = PHY_APB_ADDR((o)), \ + .off_1 = 0, \ + .val = (v), \ + .desc = (d), \ + .id = PHY_COMN_BLK, \ +} + +#define PHY_TRSV_REG_CFG_OFFSET(o, v, d, c) { \ + .off_0 = PHY_APB_ADDR((o)), \ + .off_1 = PHY_APB_ADDR((o) + (c)), \ + .val = (v), \ + .desc = (d), \ + .id = PHY_TRSV_BLK, \ +} + +#define PHY_TRSV_REG_CFG(o, v, d) \ + PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_TRSV_CH_OFFSET) + +/* UFS PHY registers */ +#define PHY_PLL_LOCK_STATUS 0x1e + +#define PHY_PLL_LOCK_BIT BIT(5) +#define PHY_CDR_LOCK_BIT BIT(4) + +/* description for PHY calibration */ +enum { + /* applicable to any */ + PWR_DESC_ANY = 0, + /* mode */ + PWR_DESC_PWM = 1, + PWR_DESC_HS = 2, + /* series */ + PWR_DESC_SER_A = 1, + PWR_DESC_SER_B = 2, + /* gear */ + PWR_DESC_G1 = 1, + PWR_DESC_G2 = 2, + PWR_DESC_G3 = 3, + /* field mask */ + MD_MASK = 0x3, + SR_MASK = 0x3, + GR_MASK = 0x7, +}; + +#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY) +#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A) +#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B) +#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY) +#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A) +#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B) +#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY) +#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A) +#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B) +#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\ + (((s) & SR_MASK) << 2) | ((m) & MD_MASK)) +#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_PWM) +#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\ + (((s) & SR_MASK) << 2) | PWR_DESC_HS) +#define PWR_MODE_HS_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_HS) +#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\ + PWR_DESC_ANY, PWR_DESC_ANY) +/* PHY calibration point/state */ +enum { + CFG_PRE_INIT, + CFG_POST_INIT, + CFG_PRE_PWR_HS, + CFG_POST_PWR_HS, + CFG_TAG_MAX, +}; + +enum { + CFG_POST_HIBERN8_ENTER, + CFG_PRE_HIBERN8_EXIT, +}; + +struct samsung_ufs_phy_cfg { + u32 off_0; + u32 off_1; + u32 val; + u8 desc; + u8 id; +}; + +struct samsung_ufs_phy_pmu_isol { + u32 offset; + u32 mask; + u32 en; +}; + +struct samsung_ufs_phy_drvdata { + const struct samsung_ufs_phy_cfg **cfgs; + const struct samsung_ufs_phy_cfg **cfgs_hibern8; + struct samsung_ufs_phy_pmu_isol isol; + const char * const *clk_list; + int num_clks; + u32 cdr_lock_status_offset; + /* SoC's specific operations */ + int (*wait_for_cal)(struct phy *phy, u8 lane); + int (*wait_for_cdr)(struct phy *phy, u8 lane); +}; + +struct samsung_ufs_phy { + struct device *dev; + void __iomem *reg_pma; + struct regmap *reg_pmu; + struct clk_bulk_data *clks; + const struct samsung_ufs_phy_drvdata *drvdata; + const struct samsung_ufs_phy_cfg * const *cfgs; + const struct samsung_ufs_phy_cfg * const *cfgs_hibern8; + struct samsung_ufs_phy_pmu_isol isol; + u8 lane_cnt; + int ufs_phy_state; + enum phy_mode mode; +}; + +static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy) +{ + return (struct samsung_ufs_phy *)phy_get_drvdata(phy); +} + +static inline void samsung_ufs_phy_ctrl_isol( + struct samsung_ufs_phy *phy, u32 isol) +{ + regmap_update_bits(phy->reg_pmu, phy->isol.offset, + phy->isol.mask, isol ? 0 : phy->isol.en); +} + +int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy, u8 lane); +int exynosautov920_ufs_phy_wait_cdr_lock(struct phy *phy, u8 lane); +void samsung_ufs_phy_config(struct samsung_ufs_phy *phy, + const struct samsung_ufs_phy_cfg *cfg, u8 lane); + +extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy; +extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy; +extern const struct samsung_ufs_phy_drvdata exynosautov920_ufs_phy; +extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy; +extern const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy; + +#endif /* _PHY_SAMSUNG_UFS_ */ diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c new file mode 100644 index 000000000..d2749b67c --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-usb2.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include "phy-samsung-usb2.h" + +static int samsung_usb2_phy_power_on(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret; + + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", + inst->cfg->label); + + if (drv->vbus) { + ret = regulator_enable(drv->vbus); + if (ret) + goto err_regulator; + } + + ret = clk_prepare_enable(drv->clk); + if (ret) + goto err_main_clk; + ret = clk_prepare_enable(drv->ref_clk); + if (ret) + goto err_instance_clk; + if (inst->cfg->power_on) { + spin_lock(&drv->lock); + ret = inst->cfg->power_on(inst); + spin_unlock(&drv->lock); + if (ret) + goto err_power_on; + } + + return 0; + +err_power_on: + clk_disable_unprepare(drv->ref_clk); +err_instance_clk: + clk_disable_unprepare(drv->clk); +err_main_clk: + if (drv->vbus) + regulator_disable(drv->vbus); +err_regulator: + return ret; +} + +static int samsung_usb2_phy_power_off(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret = 0; + + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", + inst->cfg->label); + if (inst->cfg->power_off) { + spin_lock(&drv->lock); + ret = inst->cfg->power_off(inst); + spin_unlock(&drv->lock); + if (ret) + return ret; + } + clk_disable_unprepare(drv->ref_clk); + clk_disable_unprepare(drv->clk); + if (drv->vbus) + ret = regulator_disable(drv->vbus); + + return ret; +} + +static const struct phy_ops samsung_usb2_phy_ops = { + .power_on = samsung_usb2_phy_power_on, + .power_off = samsung_usb2_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *samsung_usb2_phy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct samsung_usb2_phy_driver *drv; + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) + return ERR_PTR(-ENODEV); + + return drv->instances[args->args[0]].phy; +} + +static const struct of_device_id samsung_usb2_phy_of_match[] = { +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos3250-usb2-phy", + .data = &exynos3250_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4210_USB2 + { + .compatible = "samsung,exynos4210-usb2-phy", + .data = &exynos4210_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos4x12-usb2-phy", + .data = &exynos4x12_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS5250_USB2 + { + .compatible = "samsung,exynos5250-usb2-phy", + .data = &exynos5250_usb2_phy_config, + }, + { + .compatible = "samsung,exynos5420-usb2-phy", + .data = &exynos5420_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_S5PV210_USB2 + { + .compatible = "samsung,s5pv210-usb2-phy", + .data = &s5pv210_usb2_phy_config, + }, +#endif + { }, +}; +MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match); + +static int samsung_usb2_phy_probe(struct platform_device *pdev) +{ + const struct samsung_usb2_phy_config *cfg; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct samsung_usb2_phy_driver *drv; + int i, ret; + + if (!pdev->dev.of_node) { + dev_err(dev, "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + cfg = of_device_get_match_data(dev); + if (!cfg) + return -EINVAL; + + drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys), + GFP_KERNEL); + if (!drv) + return -ENOMEM; + + dev_set_drvdata(dev, drv); + spin_lock_init(&drv->lock); + + drv->cfg = cfg; + drv->dev = dev; + + drv->reg_phy = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(drv->reg_phy)) { + dev_err(dev, "Failed to map register memory (phy)\n"); + return PTR_ERR(drv->reg_phy); + } + + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "samsung,pmureg-phandle"); + if (IS_ERR(drv->reg_pmu)) { + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); + return PTR_ERR(drv->reg_pmu); + } + + if (drv->cfg->has_mode_switch) { + drv->reg_sys = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, "samsung,sysreg-phandle"); + if (IS_ERR(drv->reg_sys)) { + dev_err(dev, "Failed to map system registers (via syscon)\n"); + return PTR_ERR(drv->reg_sys); + } + } + + drv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(drv->clk)) { + dev_err(dev, "Failed to get clock of phy controller\n"); + return PTR_ERR(drv->clk); + } + + drv->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(drv->ref_clk)) { + dev_err(dev, "Failed to get reference clock for the phy controller\n"); + return PTR_ERR(drv->ref_clk); + } + + drv->ref_rate = clk_get_rate(drv->ref_clk); + if (drv->cfg->rate_to_clk) { + ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val); + if (ret) + return ret; + } + + drv->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(drv->vbus)) { + ret = PTR_ERR(drv->vbus); + if (ret == -EPROBE_DEFER) + return ret; + drv->vbus = NULL; + } + + for (i = 0; i < drv->cfg->num_phys; i++) { + char *label = drv->cfg->phys[i].label; + struct samsung_usb2_phy_instance *p = &drv->instances[i]; + + dev_dbg(dev, "Creating phy \"%s\"\n", label); + p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops); + if (IS_ERR(p->phy)) { + dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n", + label); + return PTR_ERR(p->phy); + } + + p->cfg = &drv->cfg->phys[i]; + p->drv = drv; + phy_set_bus_width(p->phy, 8); + phy_set_drvdata(p->phy, p); + } + + phy_provider = devm_of_phy_provider_register(dev, + samsung_usb2_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(drv->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver samsung_usb2_phy_driver = { + .probe = samsung_usb2_phy_probe, + .driver = { + .of_match_table = samsung_usb2_phy_of_match, + .name = "samsung-usb2-phy", + .suppress_bind_attrs = true, + } +}; + +module_platform_driver(samsung_usb2_phy_driver); +MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver"); +MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h new file mode 100644 index 000000000..ebaf43bfc --- /dev/null +++ b/drivers/phy/samsung/phy-samsung-usb2.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + */ + +#ifndef _PHY_EXYNOS_USB2_H +#define _PHY_EXYNOS_USB2_H + +#include <linux/clk.h> +#include <linux/phy/phy.h> +#include <linux/device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> +#include <linux/regulator/consumer.h> + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct samsung_usb2_phy_driver; +struct samsung_usb2_phy_instance; +struct samsung_usb2_phy_config; + +struct samsung_usb2_phy_instance { + const struct samsung_usb2_common_phy *cfg; + struct phy *phy; + struct samsung_usb2_phy_driver *drv; + int int_cnt; + int ext_cnt; +}; + +struct samsung_usb2_phy_driver { + const struct samsung_usb2_phy_config *cfg; + struct clk *clk; + struct clk *ref_clk; + struct regulator *vbus; + unsigned long ref_rate; + u32 ref_reg_val; + struct device *dev; + void __iomem *reg_phy; + struct regmap *reg_pmu; + struct regmap *reg_sys; + spinlock_t lock; + struct samsung_usb2_phy_instance instances[]; +}; + +struct samsung_usb2_common_phy { + int (*power_on)(struct samsung_usb2_phy_instance *); + int (*power_off)(struct samsung_usb2_phy_instance *); + unsigned int id; + char *label; +}; + + +struct samsung_usb2_phy_config { + const struct samsung_usb2_common_phy *phys; + int (*rate_to_clk)(unsigned long, u32 *); + unsigned int num_phys; + bool has_mode_switch; + bool has_refclk_sel; +}; + +extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config; +extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config; +#endif |