Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

4 files changed, 616 insertions, 0 deletions

diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig
new file mode 100644
index 000000000..c2373b30b
--- /dev/null
+++ b/drivers/phy/ralink/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY drivers for Ralink platforms.
+#
+config PHY_MT7621_PCI
+	tristate "MediaTek MT7621 PCI PHY Driver"
+	depends on (RALINK && OF) || COMPILE_TEST
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
+
+config PHY_RALINK_USB
+	tristate "Ralink USB PHY driver"
+	depends on RALINK || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  This option enables support for the Ralink USB PHY found inside
+	  RT3352, MT7620, MT7628 and MT7688.
diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile
new file mode 100644
index 000000000..cda2a4a7c
--- /dev/null
+++ b/drivers/phy/ralink/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_MT7621_PCI)	+= phy-mt7621-pci.o
+obj-$(CONFIG_PHY_RALINK_USB)	+= phy-ralink-usb.o
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
new file mode 100644
index 000000000..a591ad953
--- /dev/null
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mediatek MT7621 PCI PHY Driver
+ * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sys_soc.h>
+
+#define RG_PE1_PIPE_REG				0x02c
+#define RG_PE1_PIPE_RST				BIT(12)
+#define RG_PE1_PIPE_CMD_FRC			BIT(4)
+
+#define RG_P0_TO_P1_WIDTH			0x100
+#define RG_PE1_H_LCDDS_REG			0x49c
+#define RG_PE1_H_LCDDS_PCW			GENMASK(30, 0)
+
+#define RG_PE1_FRC_H_XTAL_REG			0x400
+#define RG_PE1_FRC_H_XTAL_TYPE			BIT(8)
+#define RG_PE1_H_XTAL_TYPE			GENMASK(10, 9)
+
+#define RG_PE1_FRC_PHY_REG			0x000
+#define RG_PE1_FRC_PHY_EN			BIT(4)
+#define RG_PE1_PHY_EN				BIT(5)
+
+#define RG_PE1_H_PLL_REG			0x490
+#define RG_PE1_H_PLL_BC				GENMASK(23, 22)
+#define RG_PE1_H_PLL_BP				GENMASK(21, 18)
+#define RG_PE1_H_PLL_IR				GENMASK(15, 12)
+#define RG_PE1_H_PLL_IC				GENMASK(11, 8)
+#define RG_PE1_H_PLL_PREDIV			GENMASK(7, 6)
+#define RG_PE1_PLL_DIVEN			GENMASK(3, 1)
+
+#define RG_PE1_H_PLL_FBKSEL_REG			0x4bc
+#define RG_PE1_H_PLL_FBKSEL			GENMASK(5, 4)
+
+#define	RG_PE1_H_LCDDS_SSC_PRD_REG		0x4a4
+#define RG_PE1_H_LCDDS_SSC_PRD			GENMASK(15, 0)
+
+#define RG_PE1_H_LCDDS_SSC_DELTA_REG		0x4a8
+#define RG_PE1_H_LCDDS_SSC_DELTA		GENMASK(11, 0)
+#define RG_PE1_H_LCDDS_SSC_DELTA1		GENMASK(27, 16)
+
+#define RG_PE1_LCDDS_CLK_PH_INV_REG		0x4a0
+#define RG_PE1_LCDDS_CLK_PH_INV			BIT(5)
+
+#define RG_PE1_H_PLL_BR_REG			0x4ac
+#define RG_PE1_H_PLL_BR				GENMASK(18, 16)
+
+#define	RG_PE1_MSTCKDIV_REG			0x414
+#define RG_PE1_MSTCKDIV				GENMASK(7, 6)
+
+#define RG_PE1_FRC_MSTCKDIV			BIT(5)
+
+#define MAX_PHYS	2
+
+/**
+ * struct mt7621_pci_phy - Mt7621 Pcie PHY core
+ * @dev: pointer to device
+ * @regmap: kernel regmap pointer
+ * @phy: pointer to the kernel PHY device
+ * @sys_clk: pointer to the system XTAL clock
+ * @port_base: base register
+ * @has_dual_port: if the phy has dual ports.
+ * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
+ * needs to be executed. Depends on chip revision.
+ */
+struct mt7621_pci_phy {
+	struct device *dev;
+	struct regmap *regmap;
+	struct phy *phy;
+	struct clk *sys_clk;
+	void __iomem *port_base;
+	bool has_dual_port;
+	bool bypass_pipe_rst;
+};
+
+static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
+				  u32 reg, u32 clr, u32 set)
+{
+	u32 val;
+
+	/*
+	 * We cannot use 'regmap_write_bits' here because internally
+	 * 'set' is masked before is set to the value that will be
+	 * written to the register. That way results in no reliable
+	 * pci setup. Avoid to mask 'set' before set value to 'val'
+	 * completely avoid the problem.
+	 */
+	regmap_read(phy->regmap, reg, &val);
+	val &= ~clr;
+	val |= set;
+	regmap_write(phy->regmap, reg, val);
+}
+
+static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
+{
+	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST);
+	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC);
+
+	if (phy->has_dual_port) {
+		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
+			       0, RG_PE1_PIPE_RST);
+		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
+			       0, RG_PE1_PIPE_CMD_FRC);
+	}
+}
+
+static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
+{
+	struct device *dev = phy->dev;
+	unsigned long clk_rate;
+
+	clk_rate = clk_get_rate(phy->sys_clk);
+	if (!clk_rate)
+		return -EINVAL;
+
+	/* Set PCIe Port PHY to disable SSC */
+	/* Debug Xtal Type */
+	mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
+		       RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
+		       RG_PE1_FRC_H_XTAL_TYPE |
+		       FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));
+
+	/* disable port */
+	mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
+		       RG_PE1_FRC_PHY_EN);
+
+	if (phy->has_dual_port) {
+		mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+	}
+
+	if (clk_rate == 40000000) { /* 40MHz Xtal */
+		/* Set Pre-divider ratio (for host mode) */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
+
+		dev_dbg(dev, "Xtal is 40MHz\n");
+	} else if (clk_rate == 25000000) { /* 25MHz Xal */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
+		/* Select feedback clock */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
+			       RG_PE1_H_PLL_FBKSEL,
+			       FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
+
+		/* DDS NCPO PCW (for host mode) */
+		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
+			       RG_PE1_H_LCDDS_SSC_PRD,
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
+
+		/* DDS SSC dither period control */
+		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
+			       RG_PE1_H_LCDDS_SSC_PRD,
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
+
+		/* DDS SSC dither amplitude control */
+		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
+			       RG_PE1_H_LCDDS_SSC_DELTA |
+			       RG_PE1_H_LCDDS_SSC_DELTA1,
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
+
+		dev_dbg(dev, "Xtal is 25MHz\n");
+	} else { /* 20MHz Xtal */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
+		dev_dbg(dev, "Xtal is 20MHz\n");
+	}
+
+	/* DDS clock inversion */
+	mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG,
+		       RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV);
+
+	/* Set PLL bits */
+	mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
+		       RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
+		       RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
+		       FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
+		       FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
+		       FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
+		       FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
+		       FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));
+
+	mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
+		       FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
+
+	if (clk_rate == 40000000) { /* 40MHz Xtal */
+		/* set force mode enable of da_pe1_mstckdiv */
+		mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
+			       RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
+			       FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
+			       RG_PE1_FRC_MSTCKDIV);
+	}
+
+	return 0;
+}
+
+static int mt7621_pci_phy_init(struct phy *phy)
+{
+	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+	if (mphy->bypass_pipe_rst)
+		mt7621_bypass_pipe_rst(mphy);
+
+	return mt7621_set_phy_for_ssc(mphy);
+}
+
+static int mt7621_pci_phy_power_on(struct phy *phy)
+{
+	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+	/* Enable PHY and disable force mode */
+	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
+		       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
+
+	if (mphy->has_dual_port) {
+		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+			       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
+	}
+
+	return 0;
+}
+
+static int mt7621_pci_phy_power_off(struct phy *phy)
+{
+	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+	/* Disable PHY */
+	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
+		       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+
+	if (mphy->has_dual_port) {
+		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+	}
+
+	return 0;
+}
+
+static int mt7621_pci_phy_exit(struct phy *phy)
+{
+	return 0;
+}
+
+static const struct phy_ops mt7621_pci_phy_ops = {
+	.init		= mt7621_pci_phy_init,
+	.exit		= mt7621_pci_phy_exit,
+	.power_on	= mt7621_pci_phy_power_on,
+	.power_off	= mt7621_pci_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
+					    const struct of_phandle_args *args)
+{
+	struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] >= MAX_PHYS))
+		return ERR_PTR(-ENODEV);
+
+	mt7621_phy->has_dual_port = args->args[0];
+
+	dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n",
+		mt7621_phy->port_base, mt7621_phy->has_dual_port);
+
+	return mt7621_phy->phy;
+}
+
+static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
+	{ .soc_id = "mt7621", .revision = "E2" },
+	{ /* sentinel */ }
+};
+
+static const struct regmap_config mt7621_pci_phy_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x700,
+};
+
+static int mt7621_pci_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct soc_device_attribute *attr;
+	struct phy_provider *provider;
+	struct mt7621_pci_phy *phy;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	attr = soc_device_match(mt7621_pci_quirks_match);
+	if (attr)
+		phy->bypass_pipe_rst = true;
+
+	phy->dev = dev;
+	platform_set_drvdata(pdev, phy);
+
+	phy->port_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(phy->port_base)) {
+		dev_err(dev, "failed to remap phy regs\n");
+		return PTR_ERR(phy->port_base);
+	}
+
+	phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base,
+					    &mt7621_pci_phy_regmap_config);
+	if (IS_ERR(phy->regmap))
+		return PTR_ERR(phy->regmap);
+
+	phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy->phy);
+	}
+
+	phy->sys_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(phy->sys_clk)) {
+		dev_err(dev, "failed to get phy clock\n");
+		return PTR_ERR(phy->sys_clk);
+	}
+
+	phy_set_drvdata(phy->phy, phy);
+
+	provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mt7621_pci_phy_ids[] = {
+	{ .compatible = "mediatek,mt7621-pci-phy" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids);
+
+static struct platform_driver mt7621_pci_phy_driver = {
+	.probe = mt7621_pci_phy_probe,
+	.driver = {
+		.name = "mt7621-pci-phy",
+		.of_match_table = mt7621_pci_phy_ids,
+	},
+};
+
+builtin_platform_driver(mt7621_pci_phy_driver);
+
+MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
+MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
new file mode 100644
index 000000000..0ff07e210
--- /dev/null
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 John Crispin <john@phrozen.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define RT_SYSC_REG_SYSCFG1		0x014
+#define RT_SYSC_REG_CLKCFG1		0x030
+#define RT_SYSC_REG_USB_PHY_CFG		0x05c
+
+#define OFS_U2_PHY_AC0			0x800
+#define OFS_U2_PHY_AC1			0x804
+#define OFS_U2_PHY_AC2			0x808
+#define OFS_U2_PHY_ACR0			0x810
+#define OFS_U2_PHY_ACR1			0x814
+#define OFS_U2_PHY_ACR2			0x818
+#define OFS_U2_PHY_ACR3			0x81C
+#define OFS_U2_PHY_ACR4			0x820
+#define OFS_U2_PHY_AMON0		0x824
+#define OFS_U2_PHY_DCR0			0x860
+#define OFS_U2_PHY_DCR1			0x864
+#define OFS_U2_PHY_DTM0			0x868
+#define OFS_U2_PHY_DTM1			0x86C
+
+#define RT_RSTCTRL_UDEV			BIT(25)
+#define RT_RSTCTRL_UHST			BIT(22)
+#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
+
+#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
+#define MT7620_CLKCFG1_UPHY1_CLK_EN	BIT(22)
+#define RT_CLKCFG1_UPHY1_CLK_EN		BIT(20)
+#define RT_CLKCFG1_UPHY0_CLK_EN		BIT(18)
+
+#define USB_PHY_UTMI_8B60M		BIT(1)
+#define UDEV_WAKEUP			BIT(0)
+
+struct ralink_usb_phy {
+	struct reset_control	*rstdev;
+	struct reset_control	*rsthost;
+	u32			clk;
+	struct phy		*phy;
+	void __iomem		*base;
+	struct regmap		*sysctl;
+};
+
+static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
+{
+	writel(val, phy->base + reg);
+}
+
+static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
+{
+	return readl(phy->base + reg);
+}
+
+static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
+{
+	u2_phy_r32(phy, OFS_U2_PHY_AC2);
+	u2_phy_r32(phy, OFS_U2_PHY_ACR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
+	u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
+	u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
+	u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
+}
+
+static int ralink_usb_phy_power_on(struct phy *_phy)
+{
+	struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+	u32 t;
+
+	/* enable the phy */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+			   phy->clk, phy->clk);
+
+	/* setup host mode */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
+			   RT_SYSCFG1_USB0_HOST_MODE,
+			   RT_SYSCFG1_USB0_HOST_MODE);
+
+	/* deassert the reset lines */
+	reset_control_deassert(phy->rsthost);
+	reset_control_deassert(phy->rstdev);
+
+	/*
+	 * The SDK kernel had a delay of 100ms. however on device
+	 * testing showed that 10ms is enough
+	 */
+	mdelay(10);
+
+	if (phy->base)
+		ralink_usb_phy_init(phy);
+
+	/* print some status info */
+	regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
+	dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
+		(t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
+	if (t & USB_PHY_UTMI_8B60M)
+		dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
+	else
+		dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
+
+	return 0;
+}
+
+static int ralink_usb_phy_power_off(struct phy *_phy)
+{
+	struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+
+	/* disable the phy */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+			   phy->clk, 0);
+
+	/* assert the reset lines */
+	reset_control_assert(phy->rstdev);
+	reset_control_assert(phy->rsthost);
+
+	return 0;
+}
+
+static const struct phy_ops ralink_usb_phy_ops = {
+	.power_on	= ralink_usb_phy_power_on,
+	.power_off	= ralink_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id ralink_usb_phy_of_match[] = {
+	{
+		.compatible = "ralink,rt3352-usbphy",
+		.data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN |
+					    RT_CLKCFG1_UPHY0_CLK_EN)
+	},
+	{
+		.compatible = "mediatek,mt7620-usbphy",
+		.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
+					    MT7620_CLKCFG1_UPHY0_CLK_EN)
+	},
+	{
+		.compatible = "mediatek,mt7628-usbphy",
+		.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
+					    MT7620_CLKCFG1_UPHY0_CLK_EN) },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
+
+static int ralink_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct ralink_usb_phy *phy;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->clk = (uintptr_t)device_get_match_data(&pdev->dev);
+	phy->base = NULL;
+
+	phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
+	if (IS_ERR(phy->sysctl)) {
+		dev_err(dev, "failed to get sysctl registers\n");
+		return PTR_ERR(phy->sysctl);
+	}
+
+	/* The MT7628 and MT7688 require extra setup of PHY registers. */
+	if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
+		phy->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(phy->base)) {
+			dev_err(dev, "failed to remap register memory\n");
+			return PTR_ERR(phy->base);
+		}
+	}
+
+	phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
+	if (IS_ERR(phy->rsthost)) {
+		dev_err(dev, "host reset is missing\n");
+		return PTR_ERR(phy->rsthost);
+	}
+
+	phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
+	if (IS_ERR(phy->rstdev)) {
+		dev_err(dev, "device reset is missing\n");
+		return PTR_ERR(phy->rstdev);
+	}
+
+	phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(phy->phy);
+	}
+	phy_set_drvdata(phy->phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver ralink_usb_phy_driver = {
+	.probe	= ralink_usb_phy_probe,
+	.driver = {
+		.of_match_table	= ralink_usb_phy_of_match,
+		.name  = "ralink-usb-phy",
+	}
+};
+module_platform_driver(ralink_usb_phy_driver);
+
+MODULE_DESCRIPTION("Ralink USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");