kbuild: rust: keep Rust objects out of Clang LTO with inline helpersgrafted

Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit
`objtool` errors such as:

    vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a:
    can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd

The reason is that in such builds, the Clang invocation that compiles
the combined Rust plus helpers bitcode emits LLVM bitcode (again) --
the final code generation happens in the linker's LTO step, which the
`-mllvm` trap options passed to Clang do not reach.

This, in turn, means that unreachable traps are missing, and the
impossible paths do not merely fallthrough to the next symbol, but past
the end of their own section, since LTO builds place each function in
its own section.

Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always
emits machine code directly, with the traps in place.

Assisted-by: LLM
Cc: Gary Guo <gary@garyguo.net>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust")
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/phy/phy-eyeq5-eth.c b/drivers/phy/phy-eyeq5-eth.c
new file mode 100644
index 000000000..d1107bc60
--- /dev/null
+++ b/drivers/phy/phy-eyeq5-eth.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gfp_types.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define EQ5_PHY_COUNT	2
+
+#define EQ5_PHY0_GP	0x128
+#define EQ5_PHY1_GP	0x12c
+#define EQ5_PHY0_SGMII	0x134
+#define EQ5_PHY1_SGMII	0x138
+
+#define EQ5_GP_TX_SWRST_DIS	BIT(0)		// Tx SW reset
+#define EQ5_GP_TX_M_CLKE	BIT(1)		// Tx M clock enable
+#define EQ5_GP_SYS_SWRST_DIS	BIT(2)		// Sys SW reset
+#define EQ5_GP_SYS_M_CLKE	BIT(3)		// Sys clock enable
+#define EQ5_GP_SGMII_MODE	BIT(4)		// SGMII mode
+#define EQ5_GP_RGMII_DRV	GENMASK(8, 5)	// RGMII drive strength
+
+#define EQ5_SGMII_PWR_EN	BIT(0)
+#define EQ5_SGMII_RST_DIS	BIT(1)
+#define EQ5_SGMII_PLL_EN	BIT(2)
+#define EQ5_SGMII_SIG_DET_SW	BIT(3)
+#define EQ5_SGMII_PWR_STATE	BIT(4)
+#define EQ5_SGMII_PLL_ACK	BIT(18)
+#define EQ5_SGMII_PWR_STATE_ACK	GENMASK(24, 20)
+
+/*
+ * Instead of storing a phy_interface_t, we store this enum.
+ *
+ * We do not deal with RGMII timings in this generic PHY driver,
+ * it is all handled inside the net PHY.
+ */
+enum eq5_phy_submode {
+	EQ5_PHY_SUBMODE_SGMII,
+	EQ5_PHY_SUBMODE_RGMII,
+};
+
+struct eq5_phy_inst {
+	struct device		*dev;
+	struct phy		*phy;
+	void __iomem		*gp, *sgmii;
+	enum eq5_phy_submode	submode;
+	bool			sgmii_support;
+};
+
+struct eq5_phy_private {
+	struct eq5_phy_inst	phys[EQ5_PHY_COUNT];
+};
+
+static int eq5_phy_exit(struct phy *phy)
+{
+	struct eq5_phy_inst *inst = phy_get_drvdata(phy);
+
+	writel(0, inst->gp);
+	writel(0, inst->sgmii);
+	udelay(5); /* settling time */
+	return 0;
+}
+
+static int eq5_phy_init(struct phy *phy)
+{
+	struct eq5_phy_inst *inst = phy_get_drvdata(phy);
+	u32 reg;
+
+	/*
+	 * Hardware stops listening to our instructions once it is started.
+	 * It must be reset to reconfigure it.
+	 */
+	eq5_phy_exit(phy);
+
+	reg = EQ5_GP_TX_SWRST_DIS | EQ5_GP_TX_M_CLKE |
+	      EQ5_GP_SYS_SWRST_DIS | EQ5_GP_SYS_M_CLKE |
+	      FIELD_PREP(EQ5_GP_RGMII_DRV, 0x9);
+	writel(reg, inst->gp);
+
+	return 0;
+}
+
+static int eq5_phy_power_on(struct phy *phy)
+{
+	struct eq5_phy_inst *inst = phy_get_drvdata(phy);
+	u32 reg;
+
+	if (inst->submode == EQ5_PHY_SUBMODE_SGMII) {
+		writel(readl(inst->gp) | EQ5_GP_SGMII_MODE, inst->gp);
+
+		reg = EQ5_SGMII_PWR_EN | EQ5_SGMII_RST_DIS | EQ5_SGMII_PLL_EN;
+		writel(reg, inst->sgmii);
+
+		if (readl_poll_timeout(inst->sgmii, reg,
+				       reg & EQ5_SGMII_PLL_ACK, 1, 100)) {
+			dev_err(inst->dev, "PLL timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		reg = readl(inst->sgmii);
+		reg |= EQ5_SGMII_PWR_STATE | EQ5_SGMII_SIG_DET_SW;
+		writel(reg, inst->sgmii);
+	} else {
+		writel(readl(inst->gp) & ~EQ5_GP_SGMII_MODE, inst->gp);
+		writel(0, inst->sgmii);
+	}
+
+	return 0;
+}
+
+static int eq5_phy_power_off(struct phy *phy)
+{
+	struct eq5_phy_inst *inst = phy_get_drvdata(phy);
+
+	writel(readl(inst->gp) & ~EQ5_GP_SGMII_MODE, inst->gp);
+	writel(0, inst->sgmii);
+
+	return 0;
+}
+
+static int eq5_phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+			    union phy_configure_opts *opts)
+{
+	struct eq5_phy_inst *inst = phy_get_drvdata(phy);
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	if (phy_interface_mode_is_rgmii(submode))
+		return 0;
+
+	if (inst->sgmii_support && submode == PHY_INTERFACE_MODE_SGMII)
+		return 0;
+
+	return -EINVAL;
+}
+
+static int eq5_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct eq5_phy_inst *inst = phy_get_drvdata(phy);
+	enum eq5_phy_submode target_submode;
+	int ret;
+
+	ret = eq5_phy_validate(phy, mode, submode, NULL);
+	if (ret)
+		return ret;
+
+	if (submode == PHY_INTERFACE_MODE_SGMII)
+		target_submode = EQ5_PHY_SUBMODE_SGMII;
+	else
+		target_submode = EQ5_PHY_SUBMODE_RGMII;
+
+	if (target_submode == inst->submode)
+		return 0;
+
+	inst->submode = target_submode;
+
+	if (phy->power_count) {
+		eq5_phy_init(phy);
+		return eq5_phy_power_on(phy);
+	}
+
+	return 0;
+}
+
+static const struct phy_ops eq5_phy_ops = {
+	.init		= eq5_phy_init,
+	.exit		= eq5_phy_exit,
+	.power_on	= eq5_phy_power_on,
+	.power_off	= eq5_phy_power_off,
+	.set_mode	= eq5_phy_set_mode,
+	.validate	= eq5_phy_validate,
+};
+
+static struct phy *eq5_phy_xlate(struct device *dev,
+				 const struct of_phandle_args *args)
+{
+	struct eq5_phy_private *priv = dev_get_drvdata(dev);
+
+	if (args->args_count != 1 || args->args[0] >= EQ5_PHY_COUNT)
+		return ERR_PTR(-EINVAL);
+
+	return priv->phys[args->args[0]].phy;
+}
+
+static int eq5_phy_probe_phy(struct device *dev, struct eq5_phy_private *priv,
+			     unsigned int index, void __iomem *base,
+			     unsigned int gp, unsigned int sgmii,
+			     bool sgmii_support)
+{
+	struct eq5_phy_inst *inst = &priv->phys[index];
+	struct phy *phy;
+
+	phy = devm_phy_create(dev, dev->of_node, &eq5_phy_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy),
+				     "failed to create PHY %u\n", index);
+
+	inst->dev = dev;
+	inst->phy = phy;
+	inst->gp = base + gp;
+	inst->sgmii = base + sgmii;
+	inst->sgmii_support = sgmii_support;
+	phy_set_drvdata(phy, inst);
+
+	/*
+	 * Init inst->submode based on probe hardware state, allowing
+	 * consumers to power us on without first setting the mode.
+	 */
+	if (sgmii_support && (readl(inst->gp) & EQ5_GP_SGMII_MODE))
+		inst->submode = EQ5_PHY_SUBMODE_SGMII;
+	else
+		inst->submode = EQ5_PHY_SUBMODE_RGMII;
+
+	return 0;
+}
+
+static int eq5_phy_probe(struct auxiliary_device *adev,
+			 const struct auxiliary_device_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct phy_provider *provider;
+	struct eq5_phy_private *priv;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+
+	base = (void __iomem *)dev_get_platdata(dev);
+
+	ret = eq5_phy_probe_phy(dev, priv, 0, base, EQ5_PHY0_GP,
+				EQ5_PHY0_SGMII, true);
+	if (ret)
+		return ret;
+
+	ret = eq5_phy_probe_phy(dev, priv, 1, base, EQ5_PHY1_GP,
+				EQ5_PHY1_SGMII, false);
+	if (ret)
+		return ret;
+
+	provider = devm_of_phy_provider_register(dev, eq5_phy_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(dev, PTR_ERR(provider),
+				     "registering provider failed\n");
+
+	return 0;
+}
+
+static const struct auxiliary_device_id eq5_phy_id_table[] = {
+	{ .name = "clk_eyeq.phy" },
+	{}
+};
+MODULE_DEVICE_TABLE(auxiliary, eq5_phy_id_table);
+
+static struct auxiliary_driver eq5_phy_driver = {
+	.probe = eq5_phy_probe,
+	.id_table = eq5_phy_id_table,
+};
+module_auxiliary_driver(eq5_phy_driver);
+
+MODULE_DESCRIPTION("EyeQ5 Ethernet PHY driver");
+MODULE_AUTHOR("Théo Lebrun <theo.lebrun@bootlin.com>");
+MODULE_LICENSE("GPL");