Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

3 files changed, 158 insertions, 0 deletions

diff --git a/drivers/phy/nuvoton/Kconfig b/drivers/phy/nuvoton/Kconfig
new file mode 100644
index 000000000..d02cae2db
--- /dev/null
+++ b/drivers/phy/nuvoton/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY drivers for Nuvoton MA35 platforms
+#
+config PHY_MA35_USB
+	tristate "Nuvoton MA35 USB2.0 PHY driver"
+	depends on ARCH_MA35 || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB2.0 PHY on the Nuvoton MA35
+	  series SoCs.
diff --git a/drivers/phy/nuvoton/Makefile b/drivers/phy/nuvoton/Makefile
new file mode 100644
index 000000000..2937e3921
--- /dev/null
+++ b/drivers/phy/nuvoton/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PHY_MA35_USB)		+= phy-ma35d1-usb2.o
diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
new file mode 100644
index 000000000..9a459b700
--- /dev/null
+++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* USB PHY Miscellaneous Control Register */
+#define MA35_SYS_REG_USBPMISCR	0x60
+#define PHY0POR			BIT(0)  /* PHY Power-On Reset Control Bit */
+#define PHY0SUSPEND			BIT(1)  /* PHY Suspend; 0: suspend, 1: operaion */
+#define PHY0COMN			BIT(2)  /* PHY Common Block Power-Down Control */
+#define PHY0DEVCKSTB			BIT(10) /* PHY 60 MHz UTMI clock stable bit */
+
+struct ma35_usb_phy {
+	struct clk *clk;
+	struct device *dev;
+	struct regmap *sysreg;
+};
+
+static int ma35_usb_phy_power_on(struct phy *phy)
+{
+	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
+	unsigned int val;
+	int ret;
+
+	ret = clk_prepare_enable(p_phy->clk);
+	if (ret < 0) {
+		dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
+		return ret;
+	}
+
+	regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
+	if (val & PHY0SUSPEND) {
+		/*
+		 * USB PHY0 is in operation mode already
+		 * make sure USB PHY 60 MHz UTMI Interface Clock ready
+		 */
+		ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val,
+						val & PHY0DEVCKSTB, 10, 1000);
+		if (ret == 0)
+			return 0;
+	}
+
+	/*
+	 * reset USB PHY0.
+	 * wait until USB PHY0 60 MHz UTMI Interface Clock ready
+	 */
+	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND));
+	udelay(20);
+
+	/* make USB PHY0 enter operation mode */
+	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND);
+
+	/* make sure USB PHY 60 MHz UTMI Interface Clock ready */
+	ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val,
+					val & PHY0DEVCKSTB, 10, 1000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(p_phy->dev, "Check PHY clock, Timeout: %d\n", ret);
+		clk_disable_unprepare(p_phy->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ma35_usb_phy_power_off(struct phy *phy)
+{
+	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(p_phy->clk);
+	return 0;
+}
+
+static const struct phy_ops ma35_usb_phy_ops = {
+	.power_on = ma35_usb_phy_power_on,
+	.power_off = ma35_usb_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int ma35_usb_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *provider;
+	struct ma35_usb_phy *p_phy;
+	struct phy *phy;
+
+	p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL);
+	if (!p_phy)
+		return -ENOMEM;
+
+	p_phy->dev = &pdev->dev;
+	platform_set_drvdata(pdev, p_phy);
+
+	p_phy->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "nuvoton,sys");
+	if (IS_ERR(p_phy->sysreg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg),
+				     "Failed to get SYS registers\n");
+
+	p_phy->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(p_phy->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk),
+				     "failed to find usb_phy clock\n");
+
+	phy = devm_phy_create(&pdev->dev, NULL, &ma35_usb_phy_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(phy), "Failed to create PHY\n");
+
+	phy_set_drvdata(phy, p_phy);
+
+	provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(&pdev->dev, PTR_ERR(provider),
+				     "Failed to register PHY provider\n");
+	return 0;
+}
+
+static const struct of_device_id ma35_usb_phy_of_match[] = {
+	{ .compatible = "nuvoton,ma35d1-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ma35_usb_phy_of_match);
+
+static struct platform_driver ma35_usb_phy_driver = {
+	.probe		= ma35_usb_phy_probe,
+	.driver	= {
+		.name	= "ma35d1-usb2-phy",
+		.of_match_table = ma35_usb_phy_of_match,
+	},
+};
+module_platform_driver(ma35_usb_phy_driver);
+
+MODULE_DESCRIPTION("Nuvoton ma35d1 USB2.0 PHY driver");
+MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@gmail.com>");
+MODULE_LICENSE("GPL");