scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

3 files changed, 158 insertions, 0 deletions

diff --git a/drivers/phy/nuvoton/Kconfig b/drivers/phy/nuvoton/Kconfig
new file mode 100644
index 000000000..d02cae2db
--- /dev/null
+++ b/drivers/phy/nuvoton/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY drivers for Nuvoton MA35 platforms
+#
+config PHY_MA35_USB
+	tristate "Nuvoton MA35 USB2.0 PHY driver"
+	depends on ARCH_MA35 || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB2.0 PHY on the Nuvoton MA35
+	  series SoCs.
diff --git a/drivers/phy/nuvoton/Makefile b/drivers/phy/nuvoton/Makefile
new file mode 100644
index 000000000..2937e3921
--- /dev/null
+++ b/drivers/phy/nuvoton/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PHY_MA35_USB)		+= phy-ma35d1-usb2.o
diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
new file mode 100644
index 000000000..9a459b700
--- /dev/null
+++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* USB PHY Miscellaneous Control Register */
+#define MA35_SYS_REG_USBPMISCR	0x60
+#define PHY0POR			BIT(0)  /* PHY Power-On Reset Control Bit */
+#define PHY0SUSPEND			BIT(1)  /* PHY Suspend; 0: suspend, 1: operaion */
+#define PHY0COMN			BIT(2)  /* PHY Common Block Power-Down Control */
+#define PHY0DEVCKSTB			BIT(10) /* PHY 60 MHz UTMI clock stable bit */
+
+struct ma35_usb_phy {
+	struct clk *clk;
+	struct device *dev;
+	struct regmap *sysreg;
+};
+
+static int ma35_usb_phy_power_on(struct phy *phy)
+{
+	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
+	unsigned int val;
+	int ret;
+
+	ret = clk_prepare_enable(p_phy->clk);
+	if (ret < 0) {
+		dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
+		return ret;
+	}
+
+	regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
+	if (val & PHY0SUSPEND) {
+		/*
+		 * USB PHY0 is in operation mode already
+		 * make sure USB PHY 60 MHz UTMI Interface Clock ready
+		 */
+		ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val,
+						val & PHY0DEVCKSTB, 10, 1000);
+		if (ret == 0)
+			return 0;
+	}
+
+	/*
+	 * reset USB PHY0.
+	 * wait until USB PHY0 60 MHz UTMI Interface Clock ready
+	 */
+	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND));
+	udelay(20);
+
+	/* make USB PHY0 enter operation mode */
+	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND);
+
+	/* make sure USB PHY 60 MHz UTMI Interface Clock ready */
+	ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val,
+					val & PHY0DEVCKSTB, 10, 1000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(p_phy->dev, "Check PHY clock, Timeout: %d\n", ret);
+		clk_disable_unprepare(p_phy->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ma35_usb_phy_power_off(struct phy *phy)
+{
+	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(p_phy->clk);
+	return 0;
+}
+
+static const struct phy_ops ma35_usb_phy_ops = {
+	.power_on = ma35_usb_phy_power_on,
+	.power_off = ma35_usb_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int ma35_usb_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *provider;
+	struct ma35_usb_phy *p_phy;
+	struct phy *phy;
+
+	p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL);
+	if (!p_phy)
+		return -ENOMEM;
+
+	p_phy->dev = &pdev->dev;
+	platform_set_drvdata(pdev, p_phy);
+
+	p_phy->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "nuvoton,sys");
+	if (IS_ERR(p_phy->sysreg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg),
+				     "Failed to get SYS registers\n");
+
+	p_phy->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(p_phy->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk),
+				     "failed to find usb_phy clock\n");
+
+	phy = devm_phy_create(&pdev->dev, NULL, &ma35_usb_phy_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(phy), "Failed to create PHY\n");
+
+	phy_set_drvdata(phy, p_phy);
+
+	provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(&pdev->dev, PTR_ERR(provider),
+				     "Failed to register PHY provider\n");
+	return 0;
+}
+
+static const struct of_device_id ma35_usb_phy_of_match[] = {
+	{ .compatible = "nuvoton,ma35d1-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ma35_usb_phy_of_match);
+
+static struct platform_driver ma35_usb_phy_driver = {
+	.probe		= ma35_usb_phy_probe,
+	.driver	= {
+		.name	= "ma35d1-usb2-phy",
+		.of_match_table = ma35_usb_phy_of_match,
+	},
+};
+module_platform_driver(ma35_usb_phy_driver);
+
+MODULE_DESCRIPTION("Nuvoton ma35d1 USB2.0 PHY driver");
+MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@gmail.com>");
+MODULE_LICENSE("GPL");