staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 100 insertions, 0 deletions

diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
new file mode 100644
index 000000000..ba6461350
--- /dev/null
+++ b/drivers/phy/mediatek/Kconfig
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Mediatek devices
+#
+config PHY_MTK_PCIE
+	tristate "MediaTek PCIe-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port, it supports software efuse
+	  initialization.
+
+config PHY_MTK_XFI_TPHY
+	tristate "MediaTek 10GE SerDes XFI T-PHY driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek XFI T-PHY driver.
+	  The driver provides access to the Ethernet SerDes T-PHY supporting
+	  1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
+	  via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
+
+config PHY_MTK_TPHY
+	tristate "MediaTek T-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF && OF_ADDRESS
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek T-PHY driver,
+	  it supports multiple usb2.0, usb3.0 ports, PCIe and
+	  SATA, and meanwhile supports two version T-PHY which have
+	  different banks layout, the T-PHY with shared banks between
+	  multi-ports is first version, otherwise is second version,
+	  so you can easily distinguish them by banks layout.
+
+config PHY_MTK_UFS
+	tristate "MediaTek UFS M-PHY driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support for UFS M-PHY on MediaTek chipsets.
+	  Enable this to provide vendor-specific probing,
+	  initialization, power on and power off flow of
+	  specified M-PHYs.
+
+config PHY_MTK_XSPHY
+	tristate "MediaTek XS-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF && OF_ADDRESS
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the SuperSpeedPlus XS-PHY transceiver for
+	  USB3.1 GEN2 controllers on MediaTek chips. The driver supports
+	  multiple USB2.0, USB3.1 GEN2 ports.
+
+config PHY_MTK_HDMI
+	tristate "MediaTek HDMI-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on OF
+	depends on REGULATOR
+	select GENERIC_PHY
+	help
+	  Support HDMI PHY for Mediatek SoCs.
+
+config PHY_MTK_MIPI_CSI_0_5
+	tristate "MediaTek MIPI CSI CD-PHY v0.5 Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the MIPI CSI CD-PHY receiver version 0.5.
+	  The driver supports multiple CSI cdphy ports simultaneously.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phy-mtk-mipi-csi-0-5.
+
+config PHY_MTK_MIPI_DSI
+	tristate "MediaTek MIPI-DSI Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support MIPI DSI for Mediatek SoCs.
+
+config PHY_MTK_DP
+	tristate "MediaTek DP-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support DisplayPort PHY for MediaTek SoCs.