Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 100 insertions, 0 deletions

diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
new file mode 100644
index 000000000..ba6461350
--- /dev/null
+++ b/drivers/phy/mediatek/Kconfig
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Mediatek devices
+#
+config PHY_MTK_PCIE
+	tristate "MediaTek PCIe-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port, it supports software efuse
+	  initialization.
+
+config PHY_MTK_XFI_TPHY
+	tristate "MediaTek 10GE SerDes XFI T-PHY driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek XFI T-PHY driver.
+	  The driver provides access to the Ethernet SerDes T-PHY supporting
+	  1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
+	  via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
+
+config PHY_MTK_TPHY
+	tristate "MediaTek T-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF && OF_ADDRESS
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek T-PHY driver,
+	  it supports multiple usb2.0, usb3.0 ports, PCIe and
+	  SATA, and meanwhile supports two version T-PHY which have
+	  different banks layout, the T-PHY with shared banks between
+	  multi-ports is first version, otherwise is second version,
+	  so you can easily distinguish them by banks layout.
+
+config PHY_MTK_UFS
+	tristate "MediaTek UFS M-PHY driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support for UFS M-PHY on MediaTek chipsets.
+	  Enable this to provide vendor-specific probing,
+	  initialization, power on and power off flow of
+	  specified M-PHYs.
+
+config PHY_MTK_XSPHY
+	tristate "MediaTek XS-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF && OF_ADDRESS
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the SuperSpeedPlus XS-PHY transceiver for
+	  USB3.1 GEN2 controllers on MediaTek chips. The driver supports
+	  multiple USB2.0, USB3.1 GEN2 ports.
+
+config PHY_MTK_HDMI
+	tristate "MediaTek HDMI-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on OF
+	depends on REGULATOR
+	select GENERIC_PHY
+	help
+	  Support HDMI PHY for Mediatek SoCs.
+
+config PHY_MTK_MIPI_CSI_0_5
+	tristate "MediaTek MIPI CSI CD-PHY v0.5 Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the MIPI CSI CD-PHY receiver version 0.5.
+	  The driver supports multiple CSI cdphy ports simultaneously.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phy-mtk-mipi-csi-0-5.
+
+config PHY_MTK_MIPI_DSI
+	tristate "MediaTek MIPI-DSI Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support MIPI DSI for Mediatek SoCs.
+
+config PHY_MTK_DP
+	tristate "MediaTek DP-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Support DisplayPort PHY for MediaTek SoCs.