openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 138 insertions, 0 deletions

diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
new file mode 100644
index 000000000..bccd72dcc
--- /dev/null
+++ b/drivers/phy/marvell/Kconfig
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Marvell platforms
+#
+config ARMADA375_USBCLUSTER_PHY
+	bool "Armada 375 USB cluster PHY support" if COMPILE_TEST
+	default y if MACH_ARMADA_375
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+
+config PHY_BERLIN_SATA
+	tristate "Marvell Berlin SATA PHY driver"
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
+config PHY_BERLIN_USB
+	tristate "Marvell Berlin USB PHY Driver"
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on OF && HAS_IOMEM && RESET_CONTROLLER
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB PHY on Marvell Berlin SoCs.
+
+config PHY_MVEBU_A3700_COMPHY
+	tristate "Marvell A3700 comphy driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	depends on HAVE_ARM_SMCCC
+	default ARCH_MVEBU
+	select GENERIC_PHY
+	help
+	  This driver allows to control the comphy, a hardware block providing
+	  shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
+	  used by various controllers: Ethernet, SATA, USB3, PCIe.
+
+config PHY_MVEBU_A3700_UTMI
+	tristate "Marvell A3700 UTMI driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	default ARCH_MVEBU
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell A3700 UTMI PHY driver.
+
+config PHY_MVEBU_A38X_COMPHY
+	tristate "Marvell Armada 38x comphy driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  This driver allows to control the comphy, an hardware block providing
+	  shared serdes PHYs on Marvell Armada 38x. Its serdes lanes can be
+	  used by various controllers (Ethernet, sata, usb, PCIe...).
+
+config PHY_MVEBU_CP110_COMPHY
+	tristate "Marvell CP110 comphy driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	depends on HAVE_ARM_SMCCC
+	select GENERIC_PHY
+	help
+	  This driver allows to control the comphy, an hardware block providing
+	  shared serdes PHYs on Marvell Armada 7k/8k (in the CP110). Its serdes
+	  lanes can be used by various controllers (Ethernet, sata, usb,
+	  PCIe...).
+
+config PHY_MVEBU_CP110_UTMI
+	tristate "Marvell CP110 UTMI driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF && USB_COMMON
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell CP110 UTMI PHY driver.
+
+config PHY_MVEBU_SATA
+	def_bool y
+	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+	depends on OF
+	select GENERIC_PHY
+
+config PHY_PXA_28NM_HSIC
+	tristate "Marvell USB HSIC 28nm PHY Driver"
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell USB HSIC PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell ehci driver.
+
+	  To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+	tristate "Marvell USB 2.0 28nm PHY Driver"
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell USB 2.0 PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+	  To compile this driver as a module, choose M here.
+
+config PHY_PXA_USB
+	tristate "Marvell PXA USB PHY Driver"
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell PXA USB PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+	  To compile this driver as a module, choose M here.
+
+config PHY_MMP3_USB
+	tristate "Marvell MMP3 USB PHY Driver"
+	depends on MACH_MMP3_DT || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell MMP3 USB PHY driver for Marvell
+	  SoC. This driver will do the PHY initialization and shutdown.
+	  The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+	  To compile this driver as a module, choose M here.
+
+config PHY_MMP3_HSIC
+	tristate "Marvell MMP3 USB HSIC PHY Driver"
+	depends on MACH_MMP3_DT || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell MMP3 USB HSIC PHY driver for
+	  Marvell MMP3 SoC. This driver will be used my the Marvell EHCI
+	  driver to initialize the interface to internal USB HSIC
+	  components on MMP3-based boards.
+
+	  To compile this driver as a module, choose M here.