openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 77 insertions, 0 deletions

diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
new file mode 100644
index 000000000..5bf3864fb
--- /dev/null
+++ b/drivers/phy/freescale/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+if (ARCH_MXC && ARM64) || COMPILE_TEST
+
+config PHY_FSL_IMX8MQ_USB
+	tristate "Freescale i.MX8M USB3 PHY"
+	depends on OF && HAS_IOMEM
+	depends on TYPEC || TYPEC=n
+	select GENERIC_PHY
+	default ARCH_MXC && ARM64
+
+config PHY_MIXEL_LVDS_PHY
+	tristate "Mixel LVDS PHY support"
+	depends on OF
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to add support for the Mixel LVDS PHY as found
+	  on NXP's i.MX8qm SoC.
+
+config PHY_MIXEL_MIPI_DPHY
+	tristate "Mixel MIPI DSI PHY support"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	select REGMAP_MMIO
+	help
+	  Enable this to add support for the Mixel DSI PHY as found
+	  on NXP's i.MX8 family of SOCs.
+
+config PHY_FSL_IMX8M_PCIE
+	tristate "Freescale i.MX8M PCIE PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to add support for the PCIE PHY as found on
+	  i.MX8M family of SOCs.
+
+config PHY_FSL_IMX8QM_HSIO
+	tristate "Freescale i.MX8QM HSIO PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to add support for the HSIO PHY as found on
+	  i.MX8QM family of SOCs.
+
+config PHY_FSL_SAMSUNG_HDMI_PHY
+	tristate "Samsung HDMI PHY support"
+	depends on OF && HAS_IOMEM && COMMON_CLK
+	help
+	  Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
+endif
+
+config PHY_FSL_LYNX_CORE
+	tristate
+
+config PHY_FSL_LYNX_10G
+	tristate "Freescale Layerscape Lynx 10G SerDes PHY support"
+	depends on OF
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	select GENERIC_PHY
+	select PHY_FSL_LYNX_CORE
+	help
+	  Enable this to add support for the Lynx 10G SerDes PHY as found on
+	  NXP's Layerscape platform such as LS1088A or LS1028A.
+
+config PHY_FSL_LYNX_28G
+	tristate "Freescale Layerscape Lynx 28G SerDes PHY support"
+	depends on OF
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	select GENERIC_PHY
+	select PHY_FSL_LYNX_CORE
+	help
+	  Enable this to add support for the Lynx SerDes 28G PHY as
+	  found on NXP's Layerscape platforms such as LX2160A.
+	  Used to change the protocol running on SerDes lanes at runtime.
+	  Only useful for a restricted set of Ethernet protocols.